ITunes 7.1.3 Quicktime Error

Whenever i load itunes, it says i have the wrong Quicktime, but when i install it, it says i have the right one. I need help....... This version *****.

Try removing QUicktime using the method for Quicktime in this article:
http://support.apple.com/kb/HT1923
Then download and install the version of Quicktime that does not include iTunes (the second option):
http://www.apple.com/quicktime/download/win.html

Similar Messages

  • ITunes won't open, QuickTime error message

    By accident, I deleted QuickTime, and can now not open iTunes, so I downloaded QuickTime again, recieved a message that QuickTime has been successfully downloaded, but when I try to open/run it, I get this error message:
    "C:\Documents and Settings\Owner\Local Settings\Temporary Internet Files\ContentIE5\TYMNQEZC\Quicktimeinstaller[1].exe is not a valid Win32 application"
    I am a computer illiterate, Please help me!

    hmmm. let's try an alternate technique for swapping out your QuickTime that doesn't involve redownloading an installer.
    first let's just make sure your previous QuickTime is thoroughly gone.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • Itunes 8 not working, Quicktime error, Flash 8 not working

    Ever since i did the upgrade to iTunes 8 on my windows vista machine, I can't get into itunes, quicktime or flash 8. This is really really frustrating seeing as i just bought a new iphone and i cant even get into itunes to sync it. Luckily I have a second computer i could use to unbrick it.
    The error I'm getting when I try to open itunes,
    well after i installed itunes 8 i clicked on the start menu shortcut it said please wait while windows configures itunes and then at the end it says you must restart your system for the configuration changed to itunes to take effect. so i restart my computer.. then click on the short cut again.. and it gives me the same message.. over and over!
    so i tried opening an mp3 file in itunes and it throws this error..
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 8.0.1.11
    Application Timestamp: 48e41bb0
    Fault Module Name: QuickTime.qts
    Fault Module Version: 7.55.90.70
    Fault Module Timestamp: 48ba2f81
    Exception Code: c0000005
    Exception Offset: 0008e434
    OS Version: 6.0.6001.2.1.0.256.6
    Locale ID: 3081
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    Ive uninstalled it, reinstalled it, like 4 times.. and cleaning the registry and everything between each install.
    when i open quicktime i get this error:
    Problem signature:
    Problem Event Name: BEX
    Application Name: QuickTimePlayer.exe
    Application Version: 7.55.90.70
    Application Timestamp: 48ba1f5c
    Fault Module Name: QuickTimePlayer.exe
    Fault Module Version: 7.55.90.70
    Fault Module Timestamp: 48ba1f5c
    Exception Offset: 0000130d
    Exception Code: c0000409
    Exception Data: 00000000
    OS Version: 6.0.6001.2.1.0.256.6
    Locale ID: 3081
    Additional Information 1: 4419
    Additional Information 2: ebf79ba0046ae6662468948de5348393
    Additional Information 3: 6956
    Additional Information 4: 7abd868591af5ec835ec4f6b692849a6
    I can live without itunes and quicktime, if i have to.. but i cant live without flash.. I paid like $700 for this software, and thanks to an itunes update... i can't even use it. Flash throws the error:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Flash.exe
    Application Version: 8.0.0.478
    Application Timestamp: 4315901b
    Fault Module Name: QuickTime.qts
    Fault Module Version: 7.55.90.70
    Fault Module Timestamp: 48ba2f81
    Exception Code: c0000005
    Exception Offset: 0008e434
    OS Version: 6.0.6001.2.1.0.256.6
    Locale ID: 3081
    Additional Information 1: 810c
    Additional Information 2: e58675b4f28fe85ffd27d4c54797659b
    Additional Information 3: 1b44
    Additional Information 4: abbafcc132a6306dfccb652a44439356
    Anyways could some quicktime/itunes genius please help me! I'm really out of ideas and i have heaps of urgent flash work to do!
    Thanks so much

    I had the same thing happen to me. I am basically concerned with my itunes..

  • ITunes Won't Open - QuickTime Error?

    Hi there,
    I ran a system restore on my computer because it was acting a little weird, and when I went to open iTunes, it wouldn't open. I uninstalled, reinstalled, restarted my computer, shut off my computer.. everything.
    I keep getting the following error message:
    "QuickTime was not found.
    Quicktime is required to run iTunes. Please reinstall iTunes."
    I've tried this, about 5 or 6 times to no avail.
    Any help would be greatly appreciated!!

    Things seem to have got in a muddle, it is probably best to remove all iTunes related programs and start gain. I will give you a method for removal and phased reinstall of Quicktime. I have included installer cleanup, but this is only required for any programs wher the uninstall fails.
    If you computer was acting funny, have you checked for malware? That can cause problems for iTunes.
    Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
    To run the program – All Programs>>Windows Install Cleanup
    http://support.microsoft.com/kb/290301/
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    *If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.

  • Itunes 7.0.2 Quicktime error 2350

    I have been trying for the past 2 days to download music onto a nano 2nd generation ipod. This is a Christmas gift for my friend's daughter, and I am trying to help her out. I have an ipod shuffle and have never had a problem downloading music. However, once I was ready to download to the nano ipod it told me I needed to update by downloading itunes 7.0.2.....I tried this...several times and several different ways...however it keeps coming back to error code 2350. Could someone PLEASE help a frustrated woman solve this problem?!! I need the answer ASAP...since it is a Christmas present!
    Thank you in advance!!!

    However, once I was ready to download to the nano ipod it told me I needed to update by downloading itunes 7.0.2.....I tried this...several times and several different ways...however it keeps coming back to error code 2350.
    what is the name of the .cab file your 2350 is mentioning, SGTWife?

  • Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    Can you start QuickTime on your computer?
    You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

  • Hi.  Ever since I downloaded the last itunes and quicktime update (a week or so ago), I can't access any video podcasts or movies I have stored in itunes.  iTunes keeps crashing and telling me I have a quicktime error.  Do I uninstall quicktime? or?

    Hi .  Ever since I downloaded the last itunes and quicktime update ( a week or so ago), I can't access any movies or video podcasts i have store in itunes on my pc (vista).  iTunes crashes and my error reports tell me it is a quicktime error.  Do i uninstall and reinstall quicktime, or completely uninstall itunes and reinstall it -- if so, what will i lose?  Help, please!

    Let's try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • ITunes has stopped working/Quicktime uninstall HKEY error!!

    Ok so I just bought a brand new computer that is Windows Vista 64-bit. I installed iTunes and Quicktime the 64 bit version and everything was great until it stopped working. Data execution prevention will not let iTunes open. Here are the steps Ive taken in attempt to fix the problem.
    *Uninstalling Itunes AND Quicktime*
    --iTunes was successful but Quicktime still left a folder in Program Files, and was still listed on the programs list in control panel. So I deleted the Program Files folder. Now when I try to uninstall Quicktime I get this error:
    Could not open key:
    HKEYLOCALMACHINE32\software\classes\typelib\{B11F8D0B-BE5A-46E3-9485-EE692A8B2D3D}\1.0. Verify That you have sufficient access to that key, or contact your support personnel.
    I tried going into regedit and manually deleting the key. That didnt work!
    I also used the free ware program Revo Unistaller, which deletes the associated registry files and everything associated with an install. I did this with Quicktime and now it no longer in the Programs section in control panel, but when I try to reinstall quicktime it still asks me to repair or remove. I've tried both steps and each time I get the same error as stated above.
    What can I do to fix this?

    Hey MrsBeth, it looks like your PC is on a network or something. I am uncomfortable giving advice since I don't know what's going on there.
    What I am comfortable with is these directions below. Give yourself full control and ownership the the entire C: drive and all its subfolders. And temporarily turn off UAC for good measure - you can turn it back on after you've installed iTunes.
    Let's cross our fingers that the install goes through!
    How to Take Ownership and Grant Permissions in Windows Vista
    How to Disable UAC

  • ITunes Error -3 and QuickTime Error 1722

    Help!
    I'm at the end of my tether here, I've been trying to install iTunes 6.0 on Windows XP SP2 and getting the error -3. So, I tried the standalone Quicktime installer as recommended on this forum and I get the 1722 error.
    I've followed all the recommendations for fixing the 1722 error:
    - I've uninstalled iTunes & all versions of Quicktime
    - I've stopped all Anti-Virus/Anti-Spyware software
    - I have full admin rights to the machine
    - I've updated my Windows Installer
    - I've run the Windows Installation Clean-Up Utility
    - I've hacked the registry to death giving permissions to anything vaguely associated with Apple
    - Ditto for permissions for the WINDOWS\Registration folder and the Program Files\Apple folder and the folder I'm installing from.
    - I've stopped nearly every service I can and uninstalled just about everything that's non-essential
    Are all Apple's updates so difficult to get working for Windows users? Should I just go back to the version of iTunes I got with my iPod and forget about updates or perhaps it's a cunning ploy to get me to buy a Mac?
    Please, please help! I'm sick of this.
    Thanks.

    I tried the standalone Quicktime installer as recommended on this forum and I get the 1722 error
    good lord, psifive ... are we talking: "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." here?
    that's an extremely unusual and exotic error message to be getting in this context.
    let's proceed fairly cautiously, and start with something minimally aggressive. try
    b method 1
    from the following document:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;555175
    does the standalone go through now?
    love, b

  • Itunes Wont Load. [Major Quicktime Error]

    My Itunes wont load.
    Its saying a quitime error.
    Exact Message-
    "Quicktime failed to initialize. (Error -2096)
    Quicktime is required to run itunes. Please reinstall itunes"
    Ive download itunes four times, and quicktime three times.
    I have no idea what to do.
    Help?
    *Edit-Also, when im on quicktime, and i click an itunes icon to launch it, it even says i dont have quicktime.
    Please help people.
    Message was edited by: Rawwrz
    Message was edited by: Rawwrz

    +"Quicktime failed to initialize. (Error -2096)+
    +Quicktime is required to run itunes. Please reinstall itunes"+
    Even though you're getting a different error message, try heading into the iTunes compatibility tab, as per the following document. (Make sure that none of the boxes in there are checked ... having any box in there checked, not just the compatibility mode box itself, can cause problems.)
    iTunes for Windows: How to turn off Compatibility Mode
    Does that help with the iTunes launch?

  • I just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help :)

    i just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help

    Just FYI
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5

  • Itunes + quicktime error message - service 'ipod service' (ipod service) fa

    Help! Got new iPod Nano for Christmas and I STILL cannot get it to show up in iTunes - it has showed up in my device manager - with an over the icon - "The drivers for this device are not installed (code 28) To reinstall the drivers for this device, click Reinstall Drivers. - Then another error - Wizard cannot find the software to instal -(my iPod did not come with a disk!!!) I have done the "R's" several times! Downloaded and installed and uninstalled several x's from iTunes. Changed USB locations - I have three to choose from. Now - I am 'repairing' the latest installation from iTunes and I get this "itunes + quicktime error message - service 'ipod service' (ipod service) failed to start. Verify that you have sufficient privileges to start system services". Any ideas??? I'm not a computer genious....but I'm not a complete newbie, either! I am so FRUSTRATED!!!! This should be that difficult - I added additional RAM and it was a breeze and successful! This is just ridiculous! Any one have any other ideas???? I have read so much - even emptied the battery and recharged!!! HELP! Please! I just wanna hear some music!!! waaaaaaaaaaaaaaaaaaaaa!

    Thanks - I got it to install by going into 'run' to get to permissions, etc. So that seems OK - but my computer is still not acknowledging iPod software and for some reason iTunes is now showing 'the URL could not be opened' when I go into Help for iPod. It's still not showing up in Itunes, either

  • Can't run itunes is asking for quicktime but keep getting an error message .

    can't run itunes is asking for quicktime but keep getting an error message the feature you are trying to use is on a networkresourse tha is unavailable  c:\docume~1\test\locals~1\temp\Ixp133.

    It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

  • ITunes and Quicktime Error Messages

    Hello all,
    I get the following error message when I try to open iTunes and Quicktime from my desktop:
    "The feature you are trying to use is on a network resource that's unavailable."
    When I tried to uninstall iTunes I got the following error message:
    "This action is only valid for products that are currently installed."
    When I went to the specific folder(s) that they are in, I was able to open iTunes and Quicktime without a problem.
    Has anyone ever encountered an issue like this? I just started having problems with these programs.
    Thank you all in advance for your help.

    I figured out the problem. I had to use the Windows Installer Cleanup. I haven't had any other problems thus far.
    Thanks again.

  • Quicktime errors when installing itunes.

    I've been trying to install itunes for the last couple of days and have folowed the instructions provided by apple. When I try tpo run the program I always get the following ' Quicktime error. Quicktime failed to initialise (error-2096). Please uninstall itunes , then reinstall itunes again.
    I've done this abut half a dozen times and it's not working. Getting a bit fed up with the whole thing.
    Anyone got any ideas??

    You should find the compatibility tab if you are looking in the right place.
    Could you confirm what you did.
    Open My Comupter, then the c: drive
    Open c:\Program Files\Quicktime
    Right click on Quicktimeplayer.exe
    Select Properties.
    The compatibility tab should be right there.

Maybe you are looking for

  • Browse (Firefox) crashing when Flash Player enabled

    Hello, i'm JoLLDS VOLPE and i'm having trouble with Flash Player Before i format my PC, the flash player (nd the Google Chrome, keep reading for understand this part ) was all fine, not having trouble. I formatted my PC because the very low spce in d

  • Crystal Report for Generating ID Cards

    Post Author: fritzjeran CA Forum: General Good day, I'am a newbie to Crystal Report. My boss requires me to make a report that would pull employees data from MySql Server and Generate ID Cards for printing. I'am using C# .net for my programming langu

  • Blue screen unmountable_boot_volume

    I have a toshibia laptop that has crashed, I am eventually getting the unmountable_boot_volume error blue screen, the recovery disks that i ordered will not work, just disk 1 loads windows file then goes to a black screen with the cursor pointer, com

  • It's 10:00 am - Do you know how your Services Are?

    Measuring service is no longer pure availability of the service, but the performance of the service. To further complicate it, it's not only the technical performance, but the business performance. This is Service Level Management via Service Level A

  • SQL*Loader options - which of the two is faster?

    Hi, I am loading data into a staging table, using sqlldr. There are no indexes, and the table can be truncated. the number of rows is known prior to the call, so i can set rows=... it is a fixed size CHAR/INTEGER record of around 100 bytes. Oracle is