ITunes 7.1 does not recognise 5G iPod

Apple SOS. Just installed iTunes 7.1, iTunes no longer recognizes when I connect my 5G (30GB) iPod using the Apple USB sync cable supplied with the iPod. Both iTunes and my iPod work fine independently, but nothing happens in iTunes when I connect the iPod using the cable. It worked fine 1 week ago, but now since the installation of iTunes 7.1, nothing !
I have tried several times, using both of the USB ports on my 17' G4 Powerbook (10.4.8) As a result I cannot charge or sync my iPod, so it is now pretty much useless.
Apple needs to rectify this situation asap, but in the meantime I would like to hear from anyone else that has some problem. Is there any solution to this?
Thx
17' Powerbook G4   Mac OS X (10.4.8)   iPod 5G 30GB
17' Powerbook G4   Mac OS X (10.4.8)   iPod 5G 30GB
17' Powerbook G4   Mac OS X (10.4.8)   iPod 5G 30GB

Hi,
Thx for the response. I was aware of these procedures, but they do not help.
I had already tried the first 3 steps before I posted my support SOS, and my OS is right up-to-date.
At the beginning of the procedure I it says to make sure the iPod is fully charge, however this is impossible because nothing happens when it is connected to my Powerbook with the USB sync cable. iTunes or OSX do not recognise it, so it will not charge or sync, and the battery is almost dead now.
Everything worked fine until I installed iTunes 7.1, so there must be a bug in this update. Note, iTunes 7.2 works ok independently of the iPod, and works
fine in standalone opeation.
Q: What difference does it make if re-install iTunes 7.1 ? Surely the problem is related to this version itself !?
Also, what will happend to my iTunes music Library if I remove the iTunes application in order to re-install it?
Thx.
17' Powerbook G4   Mac OS X (10.4.8)   iPod 5G 30GB

Similar Messages

  • I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    Here
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X
    Does the iP{od work OK
    Does it charge when connected?

  • Itunes does not recognise the ipod after update to itunes 8.2.0.23

    Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
    The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
    Thanks for your thoughts!

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • HT1386 windows media player does not recognise my ipod nano

    windows media player does not recognise my ipod nano

    irishjohn1 wrote:
    windows media player does not recognise my ipod nano
    Use iTunes.  It is designed to sync a Nano and other Apple devices.

  • HT1430 i have a red X in a circle which sometimes changes to the apple logo but no matter what instructions i try nothing else happens.  My computer nor i tunes does not recognise the ipod.

    I have a red X in a circle which sometimes changes to the apple logo but nothing else happens after i try every suggestion; Windows nor itunes does not recognise the ipod; what do you suggest?

    You could possibly try a restore from itunes or from the ipod itself, otherwise go get it looked at/replaced, that sounds like a software issue.

  • My Windows 8 PC does not recognise my Ipod  Shuffle 3rd Generation - help please?

    My Windows 8 PC does not recognise my Ipod  Shuffle 3rd Generation - help please?

    Hi Susan,
    Welcome to Apple Support Communities!
    Take a look at the article below, it has a lot of great tips that should be able to help you get that iPod rezignized by iTunes.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Jason

  • I have an iPod touch 4th generation and have tried to connect it to my Sony BDV-E970W blu-ray player. The player does not recognise the iPod. What can I do to fix this?

    I have an iPod Touch 4th gen player and cannot connect to a Sony blu-ray BDV-E970W player. Sony system does not recognise the iPod. Do I need to link the Sony to the net and upgrade the software on the dvd player?

    As the other replier said, contact Sony. It may not be compatible with the iPod.

  • HT1414 how do you restart your ipod if you just downloaded itunes and it does not recognize your ipod

    How do you restart yrdi you just downloaded itunes and it does not recognize your ipod because it is diabled?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT1414 I was in the middle of updating my iphone 4s to iOS7, then it crashed, I am able to get the apple simple when trying to restart, then it shows the cord and itunes logo and then switches off again.  Itunes on computer does not recognise the phone

    I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
    Tried the tips
    Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
    when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
    please can anyone else help me???

    Unable to Update or Restore..?
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Take your time... Pay particular attention to Steps 3 and 4
    Note:
    Some users have reported as many as 8 or 9 attempts were necessary before success.

  • TS1363 when i connect my phone itunes says it does not recognise my phone and need to update itunes to 64 bit. i have done this but still keeps coming back up!!!!!!!!!!!!!!!!

    when i try to connect my phone to itunes a message comes up saying it does not recognise it and must upgrade itunes to 64 bit i have done this numerous times but stillwill not recognise my phone.!!!!!!!!!!!!!

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • TS1363 I have itunes in windows 8 but it does not recognise my ipod. Any tips on getting it to work and be able to Sync?

    I have itunes installed on my computer, I have a new laptop with windows 8. It does not seem to recognise my ipod and therefore I cannot sync it. Any ideas on how to rectify this?

    Error -69 suggests a possible problem with the source files on your computer. Check the source disk for errors and backup if you don't already do so. See HT1210: iTunes displays a -69 error when syncing iPod for more details.
    The SyncToy backup program is also a good way to identify exactly which files cannot be read. Repeated runs may succed in copying files which won't copy over on the first attempt.
    See also Corrupt iPod classic.
    It may also help to disable any AV software while syncing or set exclusions on the media folder and the iPod's drive.
    tt2

  • My computer and itunes does not recognise my ipod nano

    I had to return a faulty ipod nano. The replacement isn't recognised in My Computer or in iTunes.
    I think this might be to do with the registration of the first nano still being recognised?
    I have reinstalled itunes and followed the 5R's in the manual, but the ipod is still not recognised eg. Will not sync.
    A dialogue box displays the following message:
    'an ipod has been detected,but it could not be identified properly...'
    Can anybody help?

    I am facing the same problem, buddy. My iPod nano is not recognized by my MacBook Pro nor by iTunes.
    I tried everything suggested in trouble shooting. Looks like, I will have to visit an apple store soon to get it replaced/exchanged.

  • Hey guys, I need help. I started using mi ipod last week. I could connect it OK to Itunes. Then when I connected again some software update was installed. After that Itunes does not recognise my ipod and now it says it needs to be "restaurado". HELP

    I've tried many solutions they gave me but I can get Itunes to recognise my Ipod. I'm starting to get frustrated with this device,

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Itunes does not recognise my ipod it says i,m already logged in with another ipod. i have only ever used the one i,m using now on this PC.

    I tried to access my itunes account with my ipod touch. Itunes says i,m already using another ipod, which isn,t true. I have downloaded all my music and games to ipod touch. I did have another PC which i used an ipod nano. I have not used it on this PC. All my music has my music albums have been wiped out.Brian.

    I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
    tt2

  • Itunes on windows does not recognise ipad

    iTunes on my windows xp pc does not always recognise my iPad.  Also, the icon in the task bar which indicates when a usb device is attached, does not appear.
    Neither of these problems appear when I attach my iPod.
    Any suggestions will be welcome
    Robin

    The iPad, iPod Touch and iPhone do not appear as external drives which is why they do not show up in your Task Bar as externals the way an iPod will do if the option "Manually manage music…" has been checked. With that option selected the option "Enable disk use…" automatically becomes available which means that you can drag files to the unused portion of the drive. This is not the case with the devices mentioned above. As to the recognition of your iPad by iTunes you might want to check to see that the connection is firmly in place each time that you mount it onto the computer-- both the computer USB connection and the Apple Dock connector.

Maybe you are looking for

  • Error While Payment Proposal F110

    Dear All, I am facing problem while running transaction F110. Error Message is "Company codes GEIL/GEIL do not appear in proposal 10.03.2009 GEIL3; correct" where as GEIL is a paying and sending company code and GEIL3 is Identification id. Also attac

  • Error while calling the java proxy with the ValueMapping repl scenario

    Hi All I am trying to upload values in the RWB for vaue mapping using the standard ValueMappingReplication interface . But I can see the following message in the Message Display Tool of the RWB .This scenario was working fine sometime back suddenly a

  • How to control Display Rendering Intent in PS CS3 & XP?

    Does anyone know a way to control the display rendering intent in Photoshop CS3 runing on XP? The consensus seems to be that Relative Colormetric is always used.  If I am using a large working space such as ProPhotoRGB, I would like to be able to swi

  • HELP - Plug in crashes and shuts down browser

    I get a problem which results in the browser which is running the plug in (and the plugin itself) close down suddenly. No error. No warning, they just vanish. I am using IE5 and JRE1.3 for the plug in. The code when it occurs is KeyPairGenerator keyg

  • Alternative to COGI

    Hi PP Guys,                  As a supporting team i dont have authorization to COGI . I need to check the backflush error during confirmation with COGI. Is there any other alternate transaction or back ground job for checking this back flush error. A