Itunes 7.1 does not run. Issue with your audio config detection

Hi,
Since I updated to itunes 7.1 the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration" This happened for the first time right after the update and I have tried to downgrade to the previous version (which was working fine) but now this error occurs with previous version too.
My sound card is a creative sound blaster x-fi and I don't see anything wrong with its configuration.
The OS is Vista premium
Thanks to anyone who can help me with this.
DELL Dimension E520   Other OS   Vista and creative sb x-fi

the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration"
typically that's caused by a broken QuickTime. (iTunes uses QuickTime for audio and video playback.) see the following document for troubleshooting instructions:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Similar Messages

  • I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Itunes extra.ite does not run, im using itunes 10.2.1 on an imac OSX 10.5.8

    I downloaded the greenlantern movie with itunes extra content, but the itunes extra.ite does not run, it just apear with a blac window with the music on... bu no image, should i upgrade the itunes?

    Click here. This version can't sync any device running iOS 7.
    (90145)

  • HT2736 I can't use my Australian iTunes Card on my Australian laptop. I get a message saying "Your iTunes store (US) does not match  that of your gift certificate (Australian)".

    I can't use my Australian iTunes Card on my Australian laptop.
    I get a message saying:
    "Your iTunes store (US) does not match  that of your gift certificate (Australian)".

    You can't redeem that certificate in another country's store. You also can't change the iTunes Store country with an unspent balance.
    (72677)

  • Itunes cannot run because it detected a problem with your audio config.

    I keep coming up with this message. I feel like I have tried everything. Uninstalling---reinstalling---installing earlier versions---even tried apple's help page regarding this error. Nothing seems to work. Anyone have any ideas?

    I have exactly the same problem. Everytime I try to open itunes it shows the dialog "itunes has detected a problem with your audio config..." and then when it "opens"
    has no background, so it's impossible to do something. I've tried to reinstall itunes and quicktime in different ways like both of them separately and following every instruction in Apple's Web site like article #304424. I've installed prior versions for those programs too and the problem persist, tried to clean up the registry, etc. I don't want to reinstall Windows to solve this issue 'cause it seems to be only way to get rid of this! =( HELP!!!

  • Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Only concrete way is to use it less sorry see here every method possible has been tried
    https://discussions.apple.com/thread/4329696?start=2970&tstart=0

  • ITunes cannot run becasue it has detected a problem with your audio config

    Ok, so i've been running iTunes since March and have had no problems with it, until today. I get the message "iTunes cannot run becasue it has detected a problem with your audio configuration" now. There have been no changes that I have done to the PC. Dell has no info on this matter and I'm just hoping that someone out there may have an idea. Any help would be great.
    Dell XP 410   Other OS   Windows Vista

    that is typically caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
    the following document may be of some assistance:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem

  • Error message -ITunes has detected a problem with your audio config...HELP

    error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
    ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help me

    I've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
    First ...
    ... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
    Next ...
    If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
    Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area?

  • ITunes 11.1 does not properly sync with an iPad mini version 7.0

    Hello everyone.
    I am having difficulties using the "Podcasts" app on an iPad mini.
    Having recently downloaded the newest version (11.1) of iTunes, I have realized that iTunes now believes that my iPad mini has 20.65 GB free, when it really only has 6.4 GB available (according to settings/general). The iPad mini is right because, there are many (over 100) podcasts which have not synced to iTunes. These podcasts can be accessed and listened to on the iPad mini.
    This may be a device fault, as many of my podcasts have been coming up with "Download error. Tap to retry". This keeps approximately 1 in 10 podcasts in the downloads queue, but can still be listened to in full. Additionally, for approx. 1 in 5 podcasts, the "date released" tag that occurs underneath the name of the episode are set at the default 31 Dec 2000. This problem I can deal with, but the original problem keeps me from sharing episodes I have downloaded with other devices.
    Additionally, my device occasionally requires several attempts to find the default wifi network. It recognises other wifi networks instantly, but the default one often doesn't display as an option to connect to for about 5-10 refreshes.
    The second and third problem/symptom still occurred using the previous operating system. The first problem/symptom did not (to my knowledge) occur previously.
    Does anyone have any input on this problem? I have tried google to search for the solution to this, but did not come up with anything.
    Thanks for any advice
    Luke

    Hello everyone.
    I am having difficulties using the "Podcasts" app on an iPad mini.
    Having recently downloaded the newest version (11.1) of iTunes, I have realized that iTunes now believes that my iPad mini has 20.65 GB free, when it really only has 6.4 GB available (according to settings/general). The iPad mini is right because, there are many (over 100) podcasts which have not synced to iTunes. These podcasts can be accessed and listened to on the iPad mini.
    This may be a device fault, as many of my podcasts have been coming up with "Download error. Tap to retry". This keeps approximately 1 in 10 podcasts in the downloads queue, but can still be listened to in full. Additionally, for approx. 1 in 5 podcasts, the "date released" tag that occurs underneath the name of the episode are set at the default 31 Dec 2000. This problem I can deal with, but the original problem keeps me from sharing episodes I have downloaded with other devices.
    Additionally, my device occasionally requires several attempts to find the default wifi network. It recognises other wifi networks instantly, but the default one often doesn't display as an option to connect to for about 5-10 refreshes.
    The second and third problem/symptom still occurred using the previous operating system. The first problem/symptom did not (to my knowledge) occur previously.
    Does anyone have any input on this problem? I have tried google to search for the solution to this, but did not come up with anything.
    Thanks for any advice
    Luke

  • MRP not running - Issue with Planning File

    Hi
    In MD06 - MRP List, I see MRP list last generated on 5/30/2008. There is a production order
    with requirements date of 3/27/2008 which has been met but is still showing up on the MRP List.
    The goods issue for the production order was posted on 7/30/2008. The goods receipt for the purchase order of material is posted on 5/6/2008
    IN the stock requirements screen (Transaction: MD04), there is no entry except the following:
    8/29/2008 Stock     Available Qty = 0
    There is no entry in the planning file for this material. We run MRP automatically in the night using MD01 and this is not cleraring up the MD06 - MRP list.
    Why was not the planning file entry generated?
    How do i resolve this issue?
    Please help.
    Ketan

    Hi,
    It is perfectly ok for not having the planning file entry for this Material.
    Create a PIR for this Material now, and acheck whether system will creates the planning File entry or not..
    Inspite of having the Demand for the Material, when there is no planning file entry is a problem..
    But, every time there will not be a Planning file file entry, unless there is a change with reference to the Planning..
    Regards,
    Siva

  • ITunes for Win does not run

    I installed iTunes 6 for Windows, running XP Pro on a 5 month old Dell laptop. Things were great until iTunes stopped running. No I don't have NIS, I uninstalled and reinstalled many times with the stand-alone Quick Time, etc. Did manual uninstall of iTunes, etc. When I click on the iTunes icon, the disk light goes on for a few seconds, the license screen for iTunes appears for 1 second and then disappears. If I click on the Quic Time icon, the QT screen appears for 1 second and then disappears. Can anyone help?

    HI, I just followed this chain of events that you suggest Rob do, because that also fixed my iTunes problem, but what is this aobut adware/trojans?
    hi Jeffrey!
    many people who are getting "the flash" are reporting that they find weird four- and six-letter-name start-up items when they go into MSCONFIG that do not return any hits when people google on the names. that should not be happening.
    haven't had an explicit confirmation of this on one of the XP boxes yet, but we've had a report of someone getting this on a Win 2000 box who fixed it by eliminating a version of the Qoologic adware/trojan on their machine (Dave refers to it as "winsync" in these posts, but that's actually the name of one of the files that Qoologic imitates on a PC):
    David Johnson35, "Another installation problem?" #32, 06:25pm Nov 6, 2005 CDT
    David Johnson35, "Another installation problem?" #34, 09:03am Nov 7, 2005 CDT
    ... so a variety of Qoologic is my prime suspect for the cause of the flash. but i'm not 100% certain of that, since other adware/worms/trojans/whatnot also have this nasty habit of dropping randomly-generated-name files into a PC's startup items. here's a resource with a few of them:
    http://www.softwaretipsandtricks.com/windowsxp/articles/594/1/Random-startup-ent ry-and-filename-viruses
    (as i get more and more information about what's causing this, i try to publish it.)
    love, b

  • ITunes installs but does not run on Windows 7 64-bit

    I've spent a couple hours going over advice on this forum as well as elsewhere on the Internet to resolve this. iTunes installs without a problem but when we run it, nothing appears. iTunes.exe *32 and iTunesHelper.exe *32 appear in the Windows Task Manager but there is no other evidence that iTunes is running.
    I've tried installing and reinstalling. I've tried a number of different compatibility settings. Surely there must be an easy way to resolve this.
    Frustrated,
    Andy

    The problem, as it turns out, is Bonjour. See http://discussions.apple.com/thread.jspa?threadID=2408851&tstart=0 for ideas on how to fix....

  • IPhoto 9.3.1 update still does not fix issue with photo being out of focus when you hit the edit button

    I thought that this update would finally fix this, but this is not the case. I haven't been able to edit my photos for over a month now since the last update because of this. APPLE PLEASE FIX THIS.

    Apple don't promise to read things posted here.
    iPhoto menu -> Provide iPhoto Feedback is the route to them.

  • Films i have brought on itunes are freezing and not in sync with the audio

    i have purchaced films from the itunes store and it they will play however keep freezing and the audio goes out of sync with the film. how can i get the quality that i have paid for?

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Itunes cannot run because it has detected a problem with your audio config

    I have recently install the latest undates and since then I get the above erro message, so Itunes is not even starting now......I have removed it and reinstalled, no joy. I have removed it and install earlier versions, no joy. I have been though a setup instuctions on Apple page, default audio to headphones etc, no joy.......
    I need my music, if anybody has any ideas please let me know?
    Thanks
    Marcos

    Have you tried the instructions in this article?
    http://docs.info.apple.com/article.html?artnum=304424

Maybe you are looking for

  • How do I create a chat in my server?

    I am building an mmorpg game and one of my first tasks is to create a chat, now I have no idea about how it is working. The only thing that I do know is that there is two ways to do it, one of them will force me to update my chat page all the time an

  • Help! Trouble connecting RNP to 828mk2 and Garageband setup?

    Okay, so we started trying to use the 828mk2 for recording today. We're setting levels for the two onboard preamps with no problem. We're still waiting on Logic in the mail so we're using Garageband presently. When it came to getting the levels for t

  • RFC destination error in SM58

    Hi, We are getting an error in SM58 "P85040 does not exist". What could be the  reason for this error in PI system? When I checked, there is no RFC destination configured with the name P85040. Also there is no communication channel configured with th

  • APEX integration with BI Publisher

    I am attempting to integrate our APEX applications to BI Publisher and replace our Oracle Reports. We are using APEX 4.0 .2.00.07 BI Publisher Release 10.1.3.4 IE 7.0.5730.13 I setup a simple report query in APEX shared components. The report query h

  • Workflow not move to next level approver...

    Hi Friends,                        I have developed workflow for appraisal. Employee enter his appraisal ratings and submit  and then first,second,third level approvers enter their ratings one after another submit.                         whenever on