ITunes 7.1 (newest one) won't open and I've tried all the posted solutions

I upgraded itunes but now it won't open. I tried going to repair under the control panel, I uninstalled then re-installed, and then I deleted the SC info like the Apple tutorial said (so please don't post any of those generic links to them) and STILL it won't open (will they EVER come out with a newer one that works decently? --the only reason I upgraded right away is because the previous one made the tracks all choppy).

the cursor gets a hourglass for as second or 2 and my comp. makes the general loading noise, then nothing happens ---I don't think it's a firewall as the file is still itunes.exe (as with older versions) and it was never blocked before
yeah it opened with another windows account ---does that help you out?
(actually, it did the same load symbol then nothing --so I switched back to tell you no, then I went to log it out so I could delete it, then the thing with the user agreement (as I said I had re-installed) poped up and after clicking yes and other options about uploading music it worked -----still doesn't work on my actual windows account though)

Similar Messages

  • My CC app won't open. I have tried all the tips but it won't work.

    I have no clue what happened but out of no where my Adobe CC won't open.

    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache.  If it fails to connect try using a different browser.
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • TS1717 My Itunes won't open and I am getting message "the file "iTunes Library .itl" cannot be ready because it was created by a newer version of iTunes".  Any suggestions?

    My iTunes won't open and I am getting message "the file iTunes library .itl"cannot be read because it was created by a newer version of iTunes.  Anyone have a suggestion?

    I don't know why this error occurs, unless you have attempted to downgrade iTunes.
    This method should get you up and running again.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas?

    I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas? I can hear the PC beep when plugging it in! I suspect a bad battery and trying to charge it ina wall charger made it hot!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
    Apple Retail Store - Genius Bar       

  • Query For Finding Yearly Opening and Closing Balance for All the Items

    Hi Experts,
    I am working on Query Based Report for finding the Yearly Opening and Closing Stock for all the Items
    i will give yearwise selection and I want opening and closing stock in between that years
    Warm Regards,
    Sandip Kokate
    Edited by: Sandipk on May 20, 2011 1:58 PM

    Hi,
    Declare @SDate DateTime
    Declare @EDate DateTime
    Declare @Whse nvarchar(10)
    Set @SDate= (SELECT min(F_RefDate)  FROM  OFPR T1 where  T1.[Name] ='[1%]' )
    Set @EDate= (SELECT max(T_RefDate)  FROM  OFPR T1 where  T1.[Name] ='[%1]' )
    Set @Whse=(Select Max(s2.Warehouse) from OINM S2 Where S2.Warehouse = '[%2]')
    BEGIN
    Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription) as ItemName,
    sum(a.OpeningBalance) as OpeningBalance, sum(a.INq) as 'IN', sum(a.OUT) as OUT,
    ((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing ,
    (Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
    from( Select N1.Warehouse, N1.Itemcode, N1.Dscription, (sum(N1.inqty)-sum(n1.outqty))
    as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
    Where N1.DocDate < @SDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
    N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
    sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <= @EDate
    and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
    Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
    From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <=@EDate and N1.OutQty > 0
    and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
    where a.ItemCode=I1.ItemCode
    Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode
    END
    I hope this will work for you.
    In above query you can also user OFPR.Code, OFPR, Category OFPR.Indicator instead of OFPR.Name.
    Regards
    Vaibhav Anharwadkar
    Edited by: Vaibhav Ancharwadkar on May 24, 2011 9:23 AM

  • TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    I'm having a very similar issue, paired with iTunes not being able to get online.
    iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
    Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.    

  • I've tried all the suggested solutions to authorize my windows computer for itunes but nothing works. Is there an actual phone number I can call? Does anyone have a solution? Please spare me the "get a mac" rubbish.

    I have tried all the suggested solutions to authorize my windows computer for itunes. Is there a phone number I can call or what can I do? And please spare me the "buy a mac" comments.

    If you haven't already tried and seen these...
    Try this Discussion...
    https://discussions.apple.com/thread/4631735?tstart=0
    More Info here  >  About authorization and deauthorization
    If necessary Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Itunes doesn't see ipad - and I've tried all the remedies

    My ipad 2 (ios5) isn't recognised as a device in iTunes on my iMac (running 10.6.8). I've tried all the fixes that apple recommends and tried all the suggestions on forums - updated software, different cables, ports etc. Nothing works. Any ideas?

    Here is my standard reply so you can match it against what you have already done -
    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • My iPod Touch won't show up on my iTunes and I've tried all the suggestions on the support page.  What do I do now?

    I've had my iPod Touch for a couple years now and I went to upload music and a movie on it today and my Macbook wouldn't recognize it.  I tried the two other macs in my house and none of them recognized it.  I tried all the suggsetions from the support page, but none of them helped.  What else can I do?

    Have you tried here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • TS3694 My iphone 4 has died and says connect to itunes.  itunes restore wont work, error message 2001, then 2006 appears.  Tried all the troubleshooting help, but nothing works.  Any ideas???

    My iphone 4 has died and says connect to itunes.  itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???

    I solved my own problem. Hopefully this will help someone else.
    I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order.

  • My iPad mini won't play my music either and I have tried all the suggestions on the forum. I have no problem with my music on my full size iPad or my MacBook.

    My iPad mini won't play my synced music. I have tried all the suggestions on the forum, but it still does not work. Also it crashes on the selected song selected. I have never had a problem with my other iPad or MacBook.

    What exactly have you tried?
    "All the suggestions on the forum" doesn't really mean anything. It would be pointless for us to suggest something that you have already tried.

  • ITunes won't open and i've tried everything!

    Hi there,
    when i try to open itunes on my windows pc i get a message saying 'the folder "itunes" cannot be found or created, and is required. the default location for this folder is inside the "my music" folder.'
    my laptop was running out of space, so i moved my itunes library onto an external harddrive. when i next turned on my pc and tried to open itunes this was when i started getting the above message. i moved the libary back into the same place on my laptop's harddisk as before, but to no avail. when i pasted the files back, however, i noticed that the folder was no longer called 'my music' but 'eddy's music' (my username on the laptop, and i am the only user). my laptop isn't allowing my to rename it.
    i tried the TweakUI method suggested in the support pages but neither "my music" nor "eddy's music" appeared in the list in the special folders section. i then removed and re-installed itunes but this did not work. finally, i tried moving the library files and folders around, but again this did not work.
    what else can i try?
    many thanks in advance.

    See this post if My Music is not in the list of special folders in TweakUI:
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188
    ALternatively you may be able to work round this by doing a shift key start.
    Hold down the shift key and start iTunes, keep holding the shift key until you are asked to choose a library. Navigate to your iTunes folder and choose iTunes Library.itl. You can create a library if you don't already have one.

  • After updating my latest iTunes, the currupted program won't open or start, even tried deleting the program and reinstall.

    On my Windows 7, my latest iTune, after udating to the latest version, I cannot open or start the program.  I even deleted the program from my system and then reinstall/download iTune from Apple Store, but the same problem persist.  Anyway to get back my iTune back?

    Hey there nkg0319,
    It sounds like you have uninstalled the iTunes application but you are still not able to launch it after a recent update. I would recommend uninstalling the iTunes application and its associated files with the following article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Then download iTunes again, with this link:
    http://www.apple.com/itunes/download/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My itune page does not open and I have done all the cheks like time zone exc. I am husing windows xp

    My itune page do not open, i have done all the checks on my system like time zone exc. it does not even shows a error nr.

    Sounds like it could be your computer and not Apple. Sounds like some registry issues and/or other underlying problems.
    What are your computer specs? Year? Manufacturer? RAM? Processor (type & speed, # of cores), OS (32 bit? 64 bit? Professional? Standard?)

  • Hi my 3rd gen iPod nano is not connecting to iTunes - the error message says there is missing software to communicate with the device. I am running iTunes 10.4 on XP and I have tried all the troubleshooting routes to no avail - anybody help me out?

    I can't get Itunes to communicate with my 3rd gen Nano - I've reinstalled iTunes several times but still get the same error message for both mine and my wife's ipod - same version of 3rd gen. All the troubleshooting guide has been followed but still not connecting.
    Any ideas?

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

Maybe you are looking for

  • Does my iMac have DVD burning capability?

    I recently bought an external HP dvd1270e only to find out it won't run unless I go out and spend a bunch for Windows 7 or some version, got me thinking whether my internal is already set up to burn.  Any help would be greatly appreciated, I'm fairly

  • Please help me regarding ServiceDemo example application

    Hi Friends.. Currently i use Java Card 2.2.1, and i use JCDK 2.2.1.. There's a ServiceDemo example application that shipped with JCDK 2.2.1.. There are some files, as follows : 1. Main class that extends javacard.framework.Applet 2. TestService class

  • Get current date

    Strange thing here, in a view i want to add a column with the current date, format needs to be europ. select CONVERT(date ,getdate(),103) as datum Result: 2015-01-22 I would expect it as: 22-01-2015 What's going wrong here?

  • Availability data not visible in data warehouse

    I'm having a problem with our data warehouse. I can't run or even find availability reports from some of the objects that are visible and clearly monitored in our scom. For example I did a web transaction monitor with the wizard but when I try to run

  • How to create /home directory in a diferent disk ?

    I installed Solaris 11-11-11 on a x4640 with 4 disks: How to create /home directory in a diferent disk ? Edited by: user1502 on Apr 25, 2012 1:51 PM