ITunes 7.3 can't save library (Unknown error -50) ?????????????

So ever since i update to 7.3 my itunes is totally screwed up. it always says this when i reopen it: "iTunes 7.3 can't save library (Unknown error -50)"
not only do i have to redo whatever changes i make to my itunes but it lost a song i recently purchased because it "cant save" my itunes library. this is so frustrating. is there going to be a 7.3.1 coming out anytime soon to fix this problem because i know I'm not the only one who has it!!

So ever since i update to 7.3 my itunes is totally screwed up. it always says this when i reopen it: "iTunes 7.3 can't save library (Unknown error -50)"
If you're getting that one on iTunes 7.3.0.54, try an upgrade to iTunes 7.3.1.3. (Note that Michael, who replied to you earlier in the thread, is reporting that here: http://discussions.apple.com/message.jspa?messageID=4923385#4923385 )
Here's a link to the new installer:
iTunes 7.3.1.3 Installer

Similar Messages

  • Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

    hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
    and this is an pic for the problem

    There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

  • I cannot get my new Ipad to be recognised in ITunes  so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will cbe recognised... any ideas?

    I cannot get my new Ipad to be recognised in ITunes  so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
    I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
    Message was edited by: stephenfromwandi

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • I get message:can't save library file not enough access privileges.Don't understand what this means?

    I get message:"Can't save library file.  Not enough access privileges" .Don't understand what this means. No visible effect that I can see now.

    Classic example of why you should save your workm in progress...just hit Ctrl+s to do it on the fly.
    Yes I know. But it is the first time I work with Photoshop on such a big project and I thought it would be more stable.. Do the newer versions manage the memory better ?
    You can shrink your image down which will make it smaller enough to save
    Not enough memory to resize the image. And in the manipulation, it would corrupt some of my layers..
    you can try to save as a diffeent format
    I could succesfully save in Bitmap format. But I lose all my layers info..
    The making loads of screen shots would be good if it wasnt really an
    option seeing as it would use even more memory to do that then put the
    image together out of the screen shots.
    I made screen shots without any problem. I saved them through MS Paint without any memory problem, while Photoshop in parallel was just used as a static image for snapping...

  • Itunes application could not be opened. an unknown error occurred (13010)

    Using iTunes 8.
    Get this error when i try to open iTunes...itunes application could not be opened. an unknown error occurred (13010)
    It just shows that it tries to run in the Processes tab in the Task Manager. I get the error then the pocesses stops.
    I've followed all the instructions in the attached link but with no luck:
    http://support.apple.com/kb/TS1421
    I created a new user account and iTunes opens fine...
    Can anyone help.??

    I too am having the same problem. I have followed the above advice - I followed this advice http://support.apple.com/kb/TS1421 to no avail. For what it's worth, It appears to be isolated to my user account. I also tried uninstalling and deleting all apple software including the itunes folder in my music folder plus deleting the registry keys before reinstalling. I also tried to move th Genius files onto my desktop as per the above suggestions. Any advice?

  • The itunes application could not be opened. an unknown error occurred (1301

    I launched iTunes 9.0.1 today and got this error:
    "The itunes application could not be opened. an unknown error occurred (13014)"
    An archived tip on the iTunes for Windows forum that suggested deleting the iTunes Library Genius.itdb. That didn't work, I also had to delete iTunes Library Extras.itdb. (For the record I renamed them instead of deleting, but the original post suggested deleting).
    Anyway, I thought I'd pass that on in case anyone else experiences this problem.

    I had the same error and I keep my iTune folder on an external drive due to size. I tried to create a sub-folder to temporarirly hold the itdb file(s) and give it a try. The system wouldn't let me create the folder, at which point I remembered I had left my mac on but unplugged to find the battery drained in the morning. Upon plugging it in, it came back but then told me I hadn't exjected my external disk. So, I figured there might be a correlation. I tried to eject the disk and it wouldn't let me though no programs were running. So, I went ahead an chose to "Force" the eject via the option it presented me. On the un/re-plugging the disk, I tried to created a subfolder and it worked. Before moving any files to it, I tried starting iTunes again and voila, it worked. So, I suspect the comment above about files being locked is what bit me. Hope this helps...

  • Keep getting Cannot save library file error -50 message on my PC

    I keep getting "cannot save library file error -50 when I open up iTunes on my PC
    Won't download music purchased on iPhone4 to iTunes in my PC

    Same issue here. Running Windows Vista Home Premium Edition and newest version of iTunes. Normally happens when I am ripping a CD into iTunes and by chance multi task or the screen saver kicks in.
    What ***** is if you walk away while ripping a CD(because it takes 3 times as long in iTunes vs any other ripper), and it will halt your ripping until you click "ok". I have not tried the "dont tell me again" check box just in case it is a problem I need to know about. This happened about 2 or 3 days after upgrading to Vista and I got an empty library the next time I opened the library. Somehow it got corrupted. Luckily I back up the xml file and just restored that one file from last back up.
    (off subject but also getting the maxed our processor still in the newest version for Windows Vista. Wish they would fix that!)

  • ITunes Cannot connect to iPhone due to unknown error (0xE8000065)

    Hello!
    When I plugin my iphone to a wall, it refuses to charge (it just keeps making a bleeping noise).
    And when I try to connect my iPhone to iTunes, I can't. It just says: iTunes Cannot connect to iPhone due to unknown error (0xE8000065)
    Any suggestions? I replaced the battery hoping that would do the trick, but nada.
    Cheers

    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    Did you try a different charger and a different cable? If it won't charge the error will go away soon also when the battery dies.

  • I am receiving this error message..."The iTunes file cannot be saved. An unknown error occured (-50).

    I am receiving this error message..."The iTunes file cannot be saved. An unknown error occured (-50).
    How can I fix this problem?

    Hi cass1810,
    If you are getting a -50 error when using iTunes, you may find the following article helpful:
    iTunes Store: "Error (-50)" when downloading purchased content
    http://support.apple.com/kb/TS1583
    Regards,
    - Brenden

  • When itunes starts it comes up with "an unknown error occurred (--4211).

    when itunes starts it comes up with "an unknown error occurred (--4211).
    It then works normally - except it does not recognize any USB devices (eg iPhone, iPad)

    See the following topic for suggestions on how to find the folder on Windows 8 systems:
    TS1389 Re: How can you do this in windows 8?

  • HT201210 Itunes wont let my iphone restore, an unknown error occured (2003). I only pressed restore button.

    Itunes wont let my iphone restore, an unknown error occured (2003). I only pressed restore button.

    Hey there Palmer
    How are you?
    Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
    I did the following:
    My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
    The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
    It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
    Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
    Finally, after the file extraction was done, it began to restore the iPod!!
    I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
    Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
    If it works for you, make sure to share the tip!!
    Kind regards
    Salvador Rivera

  • 'The itunes application could not be opened. an unknown error has occurred'

    Could someone please help me, i recently had to restore my comouter to a previous date and due to this i had to reinstall a few programs along the way. Now unfortunatley itunes is not being co-operative, ive uninstalled it and then reinstalled with no luck. Each time i get to the end of the installation and tries to open up i get this message 'The itunes application could not be opened. an unknown error has occurred (-200)'
    I would appreciate any help!
    thank you

    Could someone please help me, i recently had to
    restore my comouter to a previous date and due to
    this i had to reinstall a few programs along the way.
    Now unfortunatley itunes is not being co-operative,
    ive uninstalled it and then reinstalled with no
    luck. Each time i get to the end of the installation
    and tries to open up i get this message 'The itunes
    application could not be opened. an unknown error
    has occurred (-200)'
    I would appreciate any help!
    thank you
    Ah not to worry i percievierd and managed to figure it out. Thanks to anyone that may have looked at my question!!

  • My iPod doesn't work. The screen is black but it has a ticking circle in the middle. Its been stuck like that for more than an hour. My iTunes doesnt recognize the iPod Touch and says 'iTunes could nit connect to this iPhone-unknown error

    Its been stuck like that for more than an hour. My iTunes doesnt recognize the iPod Touch and says 'iTunes could nit connect to this iPhone-unknown error

    I'm soooo sorry to bump this but MAYBE someone will know what to do?! I've just tried EVERYTHING. I need help. Please, anyone?!
    *last chance and I'm backing away sloooowly*
    thanks to ANYONE who will suggest ANYTHING at all!!!

  • ITunes could not connect to iPhone because unknown error (0XE8000001)

    Anyone getting this error? iTunes could not connect to iPhone because unknown error occurred (0XE8000001)

    I've had the same issue for a week now. Just tried to sync on my home iMac (week long problem at work on MacBook Pro, but trying a clean install at home didn't change things).

  • ITunes cannot connect to my iPhone4. Unknown error (0xE8000003).

    iTunes cannot connect to my iPhone4. Unknown error (0xE8000003).

    Another port of call for an error message (in addition to Anamusic's link) is Google. (More direct than our own search box).
    There are many references to it, amongst them the link below.
    Using Msconfig to troubleshoot conflicts in Windows XP

Maybe you are looking for

  • Flash buttons in dreamweaver 8

    Hi, i am having a problem with inserting flash button in dreamweaver 8, when i insert the buttons it appears on the page as a grey box with "F"(flash) and not displaying the proper text. The user is a standard windows users and has not administrator

  • Blue Screen of Death When Plugging in Ipod Touch 4g

    Hello, Im reciving blue screen of death when I plug in my ipod touch 4g. I have updated itunes, Drivers, This happens every time and I suspect it happens when my computer says found new hardware reconizing the ipod as a camera because once I pluged m

  • 3rd Generation iPod Shuffle Not Recognized by iTunes 11.1.1

    I am trying to have iTunes recognize my iPod Shuffle 3rd generation.  It worked fine until I downloaded iTunes 11.1.1.  I am using OS X version 10.8.5.  Does this latest version of iTunes not work with my shuffle any longer?

  • Production order link to raw Material

    Hi Experts We have manual Production order system (NO MRP) System works like this Work order (Manually given to Production) Part name Material Qty and Dispatch date. Finish Material A      This contains semi finish material X, Y, Z X contains Raw mat

  • Language selection menu

    I accidently put my iTouch in a Chinese language. Since I can't read the menu labels I can't find my way back to English. I also thought since it was new and nothing would be seriously affected that I could do a restore, but I have not been able to f