ITunes 7.5 not working after installation (downgraded from 7.6)

It won'tload or respond in any way (other than the little pointer thingy and hour glass for like 2 seconds), and it doesn't show up at all in the task manager.

What firewall are you using?
Can you confirm that the following three applications are all being allowed to access the internet: iTunes.exe, iTunesHelper.exe and QuickTime.exe.

Similar Messages

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Jquery content not working after the updates from firefox

Hi, i've realized that some of my website's banner is not working after the recent updates from firefox, whereas those website's banner is working in google chrome.
Hope there is a solution for this as i'm using the firefox for years and wish this issues can be settle.
The banner URL is http://www.irs.com.my/slider/index.html

SlideDeck has a post on how to resolve this error, caused by a bug in this very old version of their library that you're using. See: [http://www.slidedeck.com/blog/firefox-20-update-and-slidedeck-js-weve-got-you-covered/ Firefox 20 update and SlideDeck.js – we’ve got you covered] for more information. As a Pro customer, you were supposed to get an email notice, but... here you are.
I studied the script before discovering that and found two issues, but there might be more:
(1) slidedeck.jquery.js detects Firefox 20 as Firefox 2 and halts. Note that this regex is the problem:
firefox2:F.match(/firefox\/2/)?true:false
(2) Starting in Firefox 16, the -moz-transform property was unprefixed, that is, you need to use transform for Firefox 16 and later.

ITunes Library does not work after update 10.4

After updating 2 days ago to Lion,yesterday i must update Itunes to 10.4.
After updating Itunes 10.4 can not see my Itunes Library anymore on my Drobo(Ext HDD)
I've try everything but it don't work anymore.
Please help!!!

Hi Michael, depending on which drobo you have, there are firmware updates you need to download from the drobo support site and install to your drobo, along with companion software on your new Lion system. You can probably do this from any mac that can see the drobo. Maybe even from Lion. For the first gen drobo (which I have) there's not yet a Lion firmware update.
Drobo (the company) says it's working on Time Machine, which for many people is failing to play nice with Drobo after the Lion upgrade. So you may have to wait a little longer for full Time Machine readiness.
Best of luck.
http://support.drobo.com/app/answers/detail/a_id/602

OBS not working after Installation

Hi All,
I am having a had time to make OSB 10.3.0.3 x64 working on my Dell 1850 x64 machine with Windcows Server 2008 x64 on it.
OK, I've done is:
I do have a SCSI card attached to this server and a tape drive. All system is up to date with all latest drivers and firmware. I did install HP StorageWorks Library and Tape Tools to test my tape drive connectivity and performace and it is all good. After that I did install OSB , the installtion went just fine and it let me pick my tape drive. ...... and here I have issues....
1. After I finished my installation I went to windows services mmc to see if OSB service is running...and it wasn't, so I started it.
2. I went to CMD and typed "obtool" and got an error message:
obtool: Error: this host's identity to Oracle Secure Backup has not yet been established.
3. I tryed to run a Web Administration Tool and got an error page.
4. Restarted the server.
5. Apache log folder in OSB Home is empty, there is nothing there. Another thing I found that my "OSB HOME \admin\config" folder has only "dataset" folder in it when it should have folders inside. It looks like it is not configuring Apache and OSB domain for me after installation.
6. Went to CMD and run: "obtool --initnewdomain" and it let me to crete it. Even let me to get onto obtool after that but Web Admin Tool is still not working.
7. I run my HP StorageWorks Library and Tape Tools again to see if SCSI card and drive connectivity is fine.... and it cannot detect my drive anymore.
So, I did a lot of rebooting and reinstalling and it still doesn't work. There is nothing running on the same TCP port on my system and as long as OSB is installed I can not get into my tape drive using HP Tape drive tools, not even detect it.
I did a bit more testing, instead of installing x64 OSB version I did try to install x86 (32 bit) on my x64 machine. The result is that Web Admin tool is still down (I am sure it is because Apache x86 on x64 machine) which is OK, and obtool is running fine, I can start it....... so, what would be your suggestion ?
P.S. I do have a development server, which is absolutely the same including SCSI card, the only difference is that it has Windows 2003 x86 installed and has DB 11g running on it. I did connect my tape drive to thys system, installed OSB for testing and Web Admin Tool, obtool was just fine. I even was simply able to test tape backup from EMC using OSB.
Thanks

I did that....and many times.
I, figured it out!!!! When I did try to manually run "obhttpd.exe" it gave me an error that "msvcr71.dll " is missing. I've found that MS .Net Framework and MS Visual C++ 2005 contains it. So, before installing any updates on my machine, I did install all MS .Net Framework versions from 1.1 to 4.0 including all updates and Microsoft Visual C++ from 2005 to 2010. In addition, I did copy this DLL file into my System32 folder. Did install OSB and it still didn't work but "obhttpd.exe" was starting without error messages. The only thing I didn't try yet was to rename a server. So my server name was "san-manage3" and I renamed it to "san-bk3", rebooted, installed OSB and it worked. So, I don't know if it is because of long DNS name or all together, but it is fine now.

Snow Leopard not working after installation

After successful installation of Snow Leopard on a new internal hard drive (connected through IDE to SATA adapter) in my Macbook (late 2006), it is not working. No icon is clickable, only cursor can move. Please help!

The OSX 10.6.3 was successfully installed from the DVD. This is the screen after booting. But it is frozen. There is no response to clicking any of the icon in the deck or in the menu bar. I can only move cursor. That's all.

Itunes on laptop not working after update to ipad2

I am running the latest version of iTunes on my laptop which is running Windows 7. I updated my iPad Air 2 for ios8. After that, I went to play a song in iTunes and it wouldn't play. iTunes will not work now. Help!

Hello there alemaa2008,
It sounds like you are unable to use iTunes after updating your iOS devices. I would recommend the troubleshooting in the following article to help resolve the issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
If that does not fix it, can you ellaborate what is happening when you try to play a song?
Thank you for using Apple Support Communities.
All the very best,
Sterling

In-built mic not working after installation of windows 7 on my hp nc8430

So I installed windows 7 on my laptop which originally was running windows xp (hp compaq nc8430) and it turns out that the inbuilt mic is not working and it won't even recognise the SD card that i insert in the card slot. Everything was working perfectly before the installation. I checked the audio devices in control panel and it says the microphone is not plugged in. Also the screen resolution is weird, it won't go above 1024x768, everything is too big for my liking.
Could someone help me out please? Thanks in advance.

Are you using Boot Camp to attempt to install Windows?
https://www.apple.com/support/bootcamp/

Internet does not work after Installation of Oracle10g on SuSE 10 Enterpris

Hi,
I installed SUSE 10 then configured the network services using network manager as it did not work by just putting the DNS servers and router address. The internet was working fine till I installed Oracle 10g. It somehow modified my DNS address from 203.97.33.1 to 203.97.33.14. The web interface for Oracle works fine.
If I run the Network manager again, my internet starts working but the Oracle web interface does not work.
I do not understand what's happening. Please help.
Thanks.

I have never liked using Network Manager with Oracle. If you use traditional ifup, you can use SCPM and have different profiles. The first 2 things I do during an install of Suse Linux that will have Oracle 10g is disable Network Manager and disable IPv6. Go to /etc/hosts and remove all entries that have the IPv6 addresses. The 10g OC4J applications from database and application servers have problems with IPv6 addressing. Make note of your current DNS addresses and your route before reconfiguring to ifup. Use route -n to get the router address if you do not already know it. It is the gateway with values. It is also a good idea to configure your wired ethernet device to start on boot up, then you can ping your hostname whether or not your cable becomes disconnected, i.e. still access dbconsole with the router down.

Lsnrctl and sqlplus do not work after installation

I install Oracle 10g on my Linux, but it does not work. For example when run lsnrctl or sqlplus, nothing happens. Any idea?

Hi,
Create a bash profile .bash_profile in your home path as follows:
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/oracle10g
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/dbhome_1
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export ORACLE_SID=TESTDB
Save this setting and run this file first time
$. .bash_profile
Once you run this I hope sqlplus should work provided you supply correct path and directories names to this file.
Use netca to recreate your listener and start it.
$lsnrctl start
$lsnrctl status
Hope it will help.
Best regards,
Rafi.
http://rafioracledba.blogspot.com

Siri is not working after transfering data from my old iphone to the new iphone

i just bought the new 4s and i synced it with my itunes to transfer everything over and now siri wont work. she keeps saysing somethings wrong please try this again. any ideas

she worked right out of the box and then when i synced to itune, bam she went down. i read some other posts and they said shut her off in the settings tab and then turn her back on. it worked for me but from what im reading it will probably happen again. who knows if it continues to quit working i guess i will be calling apple cuz i spent way too much money on this phone for its biggest perk not to be working

JDBC control not work after upgrade application from workshop 8.1 to 9.2.3

Hi,
We upgraded application from workshop 8.1 to 9.2.3. After that, the JDBC control not work any more. We got the following exception:
java.sql.SQLException: The transaction is no longer active - status: 'Committed'. No further JDBC access is allowed within this transaction.
at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:192)
at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:202)
at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:87)
at weblogic.jdbc.wrapper.Connection.getMetaData(Connection.java:435)
at org.apache.beehive.controls.system.jdbc.parser.SqlStatement.createPreparedStatement(SqlStatement.java:128)
at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.execPreparedStatement(JdbcControlImpl.java:272)
at com.bea.wlw.runtime.core.control.internal.JdbcControlImpl.invoke(JdbcControlImpl.java:136)
at controls.SecurityBean.getUpdateDocPermission(SecurityBean.java:598)
at security.SecurityManagerImpl.getUpdateDocPermission(SecurityManagerImpl.java:110)
at security.SecurityManagerBean.getUpdateDocPermission(SecurityManagerBean.java:509)
The control that throw the exception has "transactionattribute" annotation added automatically by upgrade wizard during upgrading. Related classed are as follows:
@ControlInterface()
public interface SecurityManager
@TransactionAttribute(TransactionAttributeType.REQUIRED)
boolean getUpdateDocPermission(java.lang.String userId);
@ControlImplementation()
public class SecurityManagerImpl implements SecurityManager, Serializable
* @common:control
@org.apache.beehive.controls.api.bean.Control()
private controls.Security security;
static final long serialVersionUID = 1L;
* @common:operation
public boolean getUpdateDocPermission(String userId)
if ( security.getUpdateDocPermission(userId) > 0) {
return true;
else
return false;
@ControlExtension()
@JdbcControl.ConnectionDataSource(jndiName = "EventDesk")
public interface Security extends JdbcControl
static final long serialVersionUID = 1L;
* @jc:sql statement="select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;"
@JdbcControl.SQL(statement = "select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;")
int getUpdateDocPermission(String userId);
Thanks for your help

Hi. The issue is a level or two above JDBC. I suggest
opening an official support case. It's probably a
WLW issue.
Joe

Audio not working after I format from win8 to win7

product no:C0V01EA#ABU
Model:hp envy sleekbook 6-1126sa
Memory: 4096MB RAM
Processor: AMD A6-4455M APU ith Radeon (2CPUs) 2.1GHz
Hello, I have a problem I was unable to solve. I formated my pc from win8 to win 7 64bit , I installed all the drivers but my audio is not working . I would be glad if you can help me solve this problem.
Above is my product and model number.

Hi:
Please see if this driver works for you...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107001-1&cc=us&dlc=en&lc=en...

Creative zen V+ still not working after coming back from assistance for the second ti

hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
Good luck,
Dale

ITunes 7.5 not working after installation (downgraded from 7.6)

Similar Messages

Maybe you are looking for