ITunes 7.5 Won't Run - Says it is looking for Drive f:/

I have my Itunes on my external hard drive. Typically I have not had a problem downloading updates for Itunes onto my hard drive (drive g:/).
But for the past few updates, including 7.5, I can download the update, but when I go to run it, an error comes up saying "cannot find drive f:/". I don't have a drive f. I don't have my itunes set to download to any other drive but g:/. I need help b/c without the update, I can't use my ipod. (yes, I'm a victim to the new Ipod update which erases all material off your ipod).

Hi,
Thank you. Had to perform the following steps 'IN ORDER' to get 7.5 to work. Formerly was running iTunes 7.3.1 'without' incident.
1) Install iTunes 7.5. Quick Time 7.3 installs at same time. When error message occurs, click OK and finish installation.
2) Go to 'control panel' and remove 'Quick Time 7.3'
3) Install Quick Time '7.2.
4) Re-boot system and launch iTunes 7.5. How 'bout that. It works !!
Best Regards, DE

Similar Messages

  • After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes

    After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX

    Have you revieved this support document?
    TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

  • When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

    When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

    Try the following user tip:
    "Invalid drive X:\" install errors

  • When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

    When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

    Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
    Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
    Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe?

  • TS3212 im trying to install itunes but a message pops up saying this version is for 32 bit please use 64 bit installer, help?

    im trying to install itunes but a message pops up saying this version is for 32 bit please use 64 bit installer, help?

    Okay ... try seeing if you can download an iTunes64Setup.exe from the following download page:
    http://support.apple.com/kb/DL1577

  • I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

  • Since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says "Wi-Fi: Looking for networks- and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution?

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

  • My Itunes 64 bit won't run in windows 7

    My Itunes 64 bit decided not to run when I deleted the library.  I uninstalled it and reinstalled it several times but it won't run.  Even if I plug my ipad mini, nothing happens.
    Anybody can help?

    Follow these instructions to completely remove iTunes then reinstall.  http://support.apple.com/kb/HT1925

  • Itunes 7.5 won't run because QuickTime 7.3 is broken

    During installation of itunes you will get an error saying "Itunes cannot run because some of it's required files are missing. Please reinstall iTunes". The reason is because QuickTime 7.3 is broken. You can check by opening QTInfo.exe in the quicktime folder and it will say QuickTime is not installed. What you can do is downgrade to QuickTime 7.2. Get it at http://www.apple.com/support/downloads/quicktime72forwindows.html. iTunes 7.5 will run fine with it.

    Hi,
    Thank you. Had to perform the following steps 'IN ORDER' to get 7.5 to work. Formerly was running iTunes 7.3.1 'without' incident.
    1) Install iTunes 7.5. Quick Time 7.3 installs at same time. When error message occurs, click OK and finish installation.
    2) Go to 'control panel' and remove 'Quick Time 7.3'
    3) Install Quick Time '7.2.
    4) Re-boot system and launch iTunes 7.5. How 'bout that. It works !!
    Best Regards, DE

  • WINDOWS 8, I finally am able to download iTunes, but it won't run the installer, anyone have suggestions?

    Hi!
    I've finally figured out how to download iTunes on this crazy stupid windows OS, but when I click on the setup in my downloads folder, it won't run.  I've tried hitting "run as administrator" and troubleshooting and so far no resolution.  Is anyone else having this problem?  How can I fix it?? Please help, I am beyond frustrated.

    Hi angelxkisses,
    Welcome to Apple Support Communities.
    It looks like you’re running into an issue downloading the latest version of iTunes on your PC. Try adjusting the Pop-up Blocker settings in Internet Explorer as shown in the article below.
    iTunes: Downloading iTunes for Windows using Internet Explorer - Apple Support
    So long,
    -Jason

  • ITunes 10.5 won't run after accepting license agreement

    I've been searching message boards for the past 2 days trying to figure out what's going on but have found nothing. I'm running Windows XP Pro. I updated to iTunes 10.5 only so I can update my iphone to IOS5. The install went fine without any errors. When the installation was complete, I double clicked to load iTunes 10.5 and it opened up the software agreement screen, I clicked agree and then agreement window disappears and then nothing, just nothing... 
    I have done this several times. I've uninstalled itunes and reinstalled itunes, still the same thing. Then I went drastic and I uninstalled every single bit of apple software on my computer and then downloaded new versions from the apple site and reinstalled everything only to get the same result! No matter what I do, everytime I try to run iTunes 10.5 it only opens the software license agreement screen and does absolutely nothing once you click "accept."
    I've looked at all of the processes running and itunes appears in the process list once I run it but then after I agree to the license agreement, it dissappears from the process list after a few seconds.
    This is ridiculous.

    Blocked by configuration: (Mac OS X/Windows)
    Configure Internet Options (for Windows computers only):
    Run iTunes Diagnostics. If the "Secure link to iTunes Store" section does not pass, do the following.
    Open Internet Explorer.
    From the Tools menu, choose Internet Options.
    Click Connections.
    Under "Dial-up and Virtual Private Networking," choose "Never dial a connection." It may not be possible to choose this if you’ve never used dial-up Internet; if this is the case, skip to the next step.
    Click LAN Settings.
    In the window that opens, enable the option to "Automatically detect settings" if it is not enabled.
    iTunes uses Internet Options proxy settings. Apple recommends removing proxy settings that interfere with access to the iTunes Store if needed.
    Click OK.
    Click the Advanced tab.
    Scroll down to the Security section and look for the option to "Check for server certificate revocation." If it is enabled, disable it.
    Look for Use SSL 3.0 and Use TLS 1.0. Make sure at least one of those two checkboxes is selected and click OK (You can select both checkboxes).
    Apply any changes, and restart your computer if you modified the option to "Check for server certificate revocation" (step #11).
    Rebuild network information.
    WindowsWindows XP:
    From the Start menu, choose Run.
    In the Open field type cmd and click OK.
    In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    Windows Vista and Windows 7:
    From the Start menu, choose All Programs > Accessories and then right-click Command Prompt and choose "Run as Administrator" from the shortcut menu. If Windows needs your permission to continue, click Continue.
    In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    The hosts file may also be blocking the iTunes Store.
    If you want to have Windows try to restore the hosts to default, follow the "FixIt" in How do I reset the hosts file back to the default?.
    Note: Work systems may put information into the hosts file. Consult whomever is responsible for supporting Windows on your system before resetting the hosts file to default.
    If restoring the defaults did not resolve the issue, you can find your hosts file at C:\WINDOWS\SYSTEM32\DRIVERS\ETC .
    Select the hosts file. Choose Edit > Copy, and then choose Edit > Paste.
    There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7).
    Drag the original hosts file to your Desktop. If Windows needs your permission to continue, click Continue.
    Drag the "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) to the Desktop.
    Right-click "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
    When Notepad opens, choose Edit > Select All, and then choose  Edit > Delete.
    From the File menu,choose Save. Quit Notepad.
    Drag the "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) file from your Desktop back into the original location (given in step 2). If Windows needs your permission to continue, click Continue.
    Right-click the  "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) file, and choose Rename. Type "hosts" (without quotation marks) and press Enter.
    Restart your computer and try connecting to the iTunes Store.

  • My iTunes has stopped working out of nowhere. When iTunes is opened it displays "iTunes has stopped working" and windoes automatically closes it saying it will look for a soluton. What do I do? I have un-installed it and re-installed multiple times.

    My itunes has stopped working out of nowhere. When I open iTunes a message appears stating "iTunes has stopped working." and windows closes iTunes sayng it will look for a solution. I have Windows 8.1 64-Bit and have been using iTunes 11.1 (or the newest one out there). I have un-installed and re-installed multiple times. The same message continues to pop up.

    Hi biazonmg,
    Thanks for using Apple Support Communities.  If iTunes is unexpectedly quitting when you open it, this article has steps to isolate and troubleshoot that:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Cheers,
    - Ari

  • IPhone says it's looking for my old dead computer when trying to sync to new computer. How do I get my phone to recognize my new computer?

    My old computer died, long live the computer! Thought I'd be slick and sync my iphone with all 2000+ songs to my new computer. Loaded up iTunes, no problem, downloaded all the songs I've purchased, but when it came to syncing, it said the phone was looking for my old computer. How do I get the phone to recognize the new computer?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I can not run Netflix because it looking for a plug in

    A couple of issues since I downloaded Lion the other day.  One in particular is that I cannot run Netflix movies as it is looking for a plug-in.  Did not have this issue before the Lion upgrade.

    Make sure you have Microsoft Silverlite Mac edition installed on Lion here is the link for the download - http://www.microsoft.com/silverlight/
    this will fix netflix

  • Won't save settings, always starts looking for Proxy and have to change it to no proxy.

    When I start Firefox it is always looking for a proxy. I change it in settings but it won't save it. I have the latest version.

    See:
    * http://kb.mozillazine.org/Preferences_not_saved

Maybe you are looking for

  • License for OSX and Windows

    I am interested in purchasing a copy of PSE 9, but I am unsure on the licensing rules. As far as I can ascertain, one can have PSE installed on one notebook and one desktop on the same liscense, assuming only one can be used at any given time. If tha

  • Partner Profile not fnd (file-to-idoc)

    Hi, Idoc in r/3 failed with 56 error. Partner profile not found. partner profile was set up (between XI logical system and R/3 system) in R/3 server. Control record of idoc is showing sending system as MDMSBX01 with port SAPXI0. Actually, MDMSBX01 is

  • URGENT: Grouping in Accrual Reconciliation Report

    Hello Could anyone please explain how grouping is done in the 'Accrual Reconciliation Report' - POXACREC ? How does the group - G_item_vendor work? Is grouping being done here? My requirement is to customize this report by the logic that : If item nu

  • VID Usage or MFX value in Afterburner 3.01 for Nvidia 670/Q6600

    Where does one find a definition of the MFX "VID Usage" feature in the Nvidia 670 graphics card which Afterburner 3.01 graphs ? This seems to turn on when Windows Media Center is displaying a TV picture in //Q6600//Windows 7 64//.

  • Varray of Object Type

    Hello, I am still very new at PL/SQL so please bare with me if you can. I am trying to learn how to store data from an object in a single varray of objects. My code below is attempting to declare an object type with 3 instance attributes and 3 instan