ITunes 7.7.1.11 on Win XP locks on exit
Since upgrading, first to 7.7 and then to 7.7.1.11, my iTunes is working fine but locks on every exit. I have to use the WinXP Task Manager to kill it.
Does anyone else have this prob?
Any ideas?
Welcome to the Discussions Xperimental,
You might want to take this discussion over to the Using iTunes for Windows side, as this area is for Mac OS. You will get better results there.
Similar Messages
-
Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!
hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
Correct Answer by b noir on Aug 24, 2011 8:13 PM
Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
Does it install properly for you? If so, does iTunes install properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I bought my first iPhone which is a 4s two weeks ago, and the latest iTunes did not recognize it, while Win/Vista recognized it on the drop down list and as a camera. The same iTunes was able to detect iPhone 4 which I bought for my family member. I then connected iPhone 4s to iTunes under WinXP, and it worked fine, so I was totally confused. I submitted the question to Apple iTunes Feedback, and did not receive any reply.
I have used iTunes many years with iPod and iTouch, and was happy with it, but this incident changes my perception of Apple completely!
Eventaully, I did more research on the web, and learnt during the iTunes installation, iTunes did not update the device or USB driver for iPhone 4s!!! It was solved, under Win/Vista, by updating the device driver by pointing to the iTunes directory. My conclusion is this has to be a bug of the iTunes installation process.
Very disappointed with Apple's lack of response. I actually planned to switch to use Mac, but this experience or rather Apple's effort to rectify the problem has changed my attitude towards Apple completely. It is a shame! Or is this their tactic to encourage Win users to migrate to Apple Mac???I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.
-
HT1420 Cant get itunes to open.Error message:"its on a locked Cant get itunes to
Cant get itunes to open.Error message:"its on a locked disk." What does this mean??!!
ok heres what u gotta do
yes i know its alot of steps but if you do them right it will work.
1.remove all active versions of itunes
2.then restart as it asks you to do, if it doesnt ask do it your self
3.unplug ipod
4.remove ipod software
5. restart
6.install the cd the ipod came w/
7.when it asks you if you want to upgrade itunes say yes
8.download the file
9.intall the newest version
10.restart
if you have done exactly these steps(exactly in this order)then itunes should be working now -
Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"
Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
tt2 -
my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????
Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
Help. I am having problems trying to get to iTunes on my computer. I am getting an error message that says "The iTunes Library Extras.itdb file is on a locked disk or your don't have access to this file." Can anyone help me?
Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
tt2 -
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
Itunes cannot connect to iphone because iphone is locked and in lost mode
what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''
vineetvasudeva wrote:
what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''
Then take it out of Lost Mode the same way you put it into Lost Mode: via the Find My iPhone App or www.icloud.com. -
My ipad will not turn on. It was fully charged before it just died and would not turn back on. When I hook it up to my computer on itunes it says cannot connect because it is locked with a passcode. I know my passcode but the screen is just black, no power, so I cannot enter a pass code.
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
I activated my voiceover and now i cannot enter my passcode to unlock my phone. phone has been disabled due several entering of passcode, phone says connect to iTunes but am unable since phone is still locked. kindly assist
If you have an iTunes backup that includes the photos you may be able to extract them from the backup using a 3rd party utility such as http://www.wideanglesoftware.com/ibackupextractor/
-
my iphone says connect to itunes and i have but when i connect it to itunes it wont restore because it says its locked with a password and i dont know the password. what do i do
iOS: Unable to update or restore
-
my kids enetered the wrong unlock code on my ipod touch too many times and now the screen says IPOD DISABLED connect to itunes. I have tried connecting it to itunes and I cant because the ipod is locked. need help please! any ideas? Thanks, Nick
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
cant get my new iphone 4S to sync with my computer. I already downloaded the new itunes on my computer and still it just locks it up.
Restore the phone as New, and do not reload your backup. If you still have a problem with it you have a hardware problem.
-
When I selected the Itunes store on my win PC today-the program was closed by windows with windows saying there was a problem. I tried a couple of times and then uninstalled the itunes software and reinstalled it with the same results. The program has always worked before but I have not used it recently since the Ipad now receives it's software updates right off the router. I am running Win 7 with IE10. Anyone with the same problem?
My post has been viewed 24 times, and yet have had no answers. I have always like adobe products, however if this is the type of support they offer, I will never purchase another product of theirs. The issue I am having is the same issue many others have had, and yet no answer. Poor customer service!
Maybe you are looking for
-
Hi. I got a file X into XI (JDBC). This file shall I map in to file Y (iDoc into SAP) and part of file X shall I map to file Z (FTP out to an server). Y and Z are going to different receivers. I use several(4) mappingprograms to create Y and Z. Can I
-
Mplayer full screen w/ cvidix or sdl
been trying to run mplayer w/o x in full screen. cvidix runs fine, but it doesn't stretch (yes, i know the -fs option), and sdl, while it does run full screen, scrambles with the colors.
-
Change log for recent E6 update?
I just updated to version 025.008 and it seems like the restarting issue when using 3G has been fixed. Does anyone know what the update addressed?
-
Fm to mail .txt attachment
Hi. I need a FM to mail .txt attachment .Pls let me know with code. Kind regards, sami.
-
Can I delete the Table of Contents?
I am making a book that will not require a Table of Contents. Can I delete it? None of the options (Cut, Copy, Paste, Delete, Duplicate) will work (They come up grey and will not let me click them).