ITunes (7.7.1) Can No Longer Access the Internet

I have a WiFi network set-up with Airport Extreme. Everything works fine Internet-wise on my Macbook Pro. I also have no trouble streaming music from iTunes to my stereo via my Airport Express.
However, just upgraded to iTunes 7.7.1, and now iTunes acts as if I'm not connected to the Internet, ie, no Podcast updates, no access to the iTunes store.
Any ideas?

I had the same problem with fireworks today. Would not load some php pages...or would not let me drill down from the splash page into a secure area I tried the same thing using Safari. Was able to access, no problem. I have exhausted all possibilities with trying to get itunes working on the mac. The only thing I can think of is that perhaps the isp provider applied some obscure security setting or changed the dns somewhere...and this just affects macs??? Unless the problem is as widespread on pc's as well?? iTunes works on my pc at home but not on the mac. I am going to try a direct connection from cable to the mac, cicumventing both the router and wireless and see what happens.

Similar Messages

  • I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • I installed 7.1.2 update for my iphone5 and I have problems.   I can no longer access the internet on my phone.  My wifi is fine, and I've noticed that there is no longer any indication of "LTE" on my phone.

    Against my better judgement, I installed update 7.1.2 on my iphone5, and can no longer access the intenet.  I've dis some searching for a solution, but nothing works.  What has this happened?  And how can I fix it?

    LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
    If your Wi-Fi is working, then you should be able to access the internet.
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    * No data is lost due to a reset
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • How do I re-authorize a computer to play my iTunes music if I can no longer access the apple ID under which it was recorded?

    I had an apple ID for my daughter, linked to a hotmail account which we can no longer access.  My daughter has forgotten the password to that account.  I am unable to play music that was purchased with that iTunes account.  Apple incorrectly tells me that the date of birth is incorrect for the account, so I am unable to reset the password.

    Click here and request assistance.
    (88975)

  • After upgrading to the latest version of firefox. I can no longer access the internet and all traces of Mozilla Firefox are gone from my computer. I have no access to the internet, my home page or my e mails. What can be done??

    I have been using firefox for years. I downloaded the latest version and at the conclusion of the down load I was refussed access to the internet. Something about Proxy???? I checked my firewalls and security and they said that mozilla was allowed but everytime I attempt to gain access I am refused. I cant access the internet and I cant download another program to access the internet. I uninstalled Firefox and attempted to reinstall but after uninstalling Firefox I have no means to reinstall because there are no traces of it on my computer and I no longer have access to the internet. What do I do? I cant access my e mails, stored messages, favorites etc etc.

    No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

  • When I Disable NAT on my WRT160N I can no longer access the Internet

    Hello,
    I have had my WRT160N configured and working great for months now.  I had some non-related cable problems and the cable guy split my cable and now I have a specific modem just for the internet.  I can connect to the internet directly and wirelessly great!  However, I went into my XBox 360 to play some Halo 3 and it yelled at me that I should Disable the NAT.  I thought this was odd since my WRT160N is still the same piece of hardware and I believe that is where I disabled the NAT months ago and that it should Still have that same setting.  Apparently not?  So I connected to it and sure enough it was Enabled.  I disabled it and now I can no longer connect directly or wirelessly to the internet.  Of course, if I set it back to Enabled NAT then I can get to the internet again.  I need to turn off NAT.
    Not sure what to do here.   Can it be on the cable modem (Time Warner Cable) where the problem resides?  Would IT have a configurable setting for NAT?
    Any suggestions would be most appreciated.
    Kevin
    Solved!
    Go to Solution.

    Do the following settings for X-Box...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
    Leave Username blank & in Password use admin in lower case...
    On the set-up tab change the MTU Size to 1365 and click Save Settings...
    Click on "Administration" tab and disable UPnP and click Save Settings...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3) Click on set-up and change the MTU Size to 1452 and click Save Settings...Click on the Status tab and take note of DNS1 and DNS2 Addresses...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
    IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    5) Also assign the DNS Addresses on the Xbox
    Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

  • Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

    Hi
    After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
    All other features seem to work... only opening  the iTunes store is failing..
    I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
    Please help

    Purple-Gecko...all that I can say is, "Boom!!!"  You are THE man/woman, whichever the case may be.
    The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3).  I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store.  My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5.  Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs.  I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store. 
    Your suggestion is the only "cure" that I have found.
    I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

  • Can no longer access the iTunes store.

    As of a few days ago I can no longer access the iTunes Store.  Keep getting the page that urges me to upgrade.
    I cannot not upgrade to the current version on my G5 Power PC.  Cannot access by using Search either.  I am running
    iTunes 7.5 because all newer versions required an upgrade of Quicktime which screwed up the performance of Final Cut Studio,
    which I can also not upgrade because I don't own an Intel Mac.  I am so tired of Apple not supporting their loyal customers
    who own older Macs, especially in these hard economic times.  Was considering the purchase of an iPhone, but not anymore. 
    If anyone knows of a work around to the iTunes problem I would appreciate an answer.  It not, then Goodbye Apple it was nice
    knowing you.

    This is what I had to do to access iTunes store with 10.4.11 (took all day for the downloads)
    1. download & install iTunes 9.2.1 (101 MB)
    2. download & install Quicktime 7.5.5 (61 MB)
    3. message 'need to install Safari 4.0.3 or later' (and I never use Safari)
    4. download Safari (26 MB)
    5. Safari won't install without 'latest security update'
    6. download latest security update 2009-005 (Intel) v. 1.0 (172 MB)
    7. take a long walk
    8. install security update and restart
    9. install Safari and restart
    And yes, now I can download music again from the iTunes store.  I would have given up and gone with Amazon.com but mp3 downloads are only available to folk in USA, and I'm in Australia.

  • Updated to 10.4.1 on Itunes and now can no longer access the actual Itunes store ...

    Now i have a bit more space, i can explain what is really properly wrong. The other day i updated my itunes to the 10.4.1 version and now can no longer access the Itunes store - whenever i try to do so i get the bar at the top gets to about half way then stops and nothing happens - on rare occasions however i am taken into a place that resembles the Itunes store but there is no detail and whenever i click on anything, NOTHING happens.
    Now on a SUPER RARE occasion i'll get a notice that the request was timed out?
    If ANYBODY can help me i'll be very grateful
    Matthew

    Purple-Gecko...all that I can say is, "Boom!!!"  You are THE man/woman, whichever the case may be.
    The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3).  I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store.  My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5.  Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs.  I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store. 
    Your suggestion is the only "cure" that I have found.
    I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

  • I can no longer access the iTunes store, I get a message saying I need to update iTunes but cannot as I am on Mac OSX 10.4.1

    I have an account with the iTunes store but can no longer access the store because I get a message in iTunes store window telling me to update to an iTunes version that will only run on Mac OS 10.5.  I am on Mac OSX 10.4.1 and do not plan on upgrading that version.

    This is what I had to do to access iTunes store with 10.4.11 (took all day for the downloads)
    1. download & install iTunes 9.2.1 (101 MB)
    2. download & install Quicktime 7.5.5 (61 MB)
    3. message 'need to install Safari 4.0.3 or later' (and I never use Safari)
    4. download Safari (26 MB)
    5. Safari won't install without 'latest security update'
    6. download latest security update 2009-005 (Intel) v. 1.0 (172 MB)
    7. take a long walk
    8. install security update and restart
    9. install Safari and restart
    And yes, now I can download music again from the iTunes store.  I would have given up and gone with Amazon.com but mp3 downloads are only available to folk in USA, and I'm in Australia.

  • Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click

    Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click and hold shift key and be able to get to it. Anyone figured this out?

    The "legacy" metadata editors, for which there was a "back door" in iTunes 12.0, have gone from 12.1.  However, the revised editors in 12.1 provide access to (almost) all the metadata elements that were available in iTunes 11, albeit in a different layout and with some additional constraints based on media kind.  Some users have / will have an issue with the statement that "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item" since that removes some metadata elements that people may have been using in creative ways.  iTunes 12.1 basically gives you access to the fields that Apple think are necessary ... .  Some of the things that have been excluded by this rule:
    track and disc number fields for video media kinds
    show and episode fields for music
    description tab for audiobooks made up of more than one file
    Obviously the first two examples can be regarded as "overloading" the metadata elements - i.e., using them in ways that the designers didn't intend - but given that some users do find valid cases for this it's a shame that they've been deprecated in the new UI.  There are couple of workarounds:
    in songs view (or any of the other columnar views), you can still select any fields to display, independent of media kind, and these can be edited (though only one at a time) by double-clicking in the relevant "cell"
    you can (temporarily) change the media kind of an item (or group of items) to get access to metadata elements that would otherwise be inaccessible.
    It may be worth submitting an issue via https://www.apple.com/feedback/itunesapp.html - I can't see it as a huge development task to have a user preference to switch between "show all fields" and "filter fields based on media kind".
    One other oddity/irritation is that some of the tabs don't, by default, show all the available fields - you need to scroll up/down to access them or to expand the window by dragging on one of its corners.  Fortunately, the latter seems to be persistent - once you've done this to make all the fields visible the editor will open at the same (larger) size when opened again.

  • HT1918 How can I change my rescue email. I am trying to change my email for my Apple account because I can no longer access the email on the account. My only email I use is my rescue email and it will not allow me to change my Apple ID email to my rescue

    How can I change my rescue email or get rid of it? I need to change my email under my apple ID to the email that is my rescue email. It won't allow me to have the same email. I only have one email address and can no longer access the email address under my apple ID

    Welcome to the Apple community.
    Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

  • On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

    On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

    The "Photos" view has been replaced by the Media Browser.
    Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
    For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

  • HT3843 I install the Genius for Apps and I can no longer access the Apps Store on my I phone

    I installed the Genius for Apps on my new IPhone 5 and I can no longer access the App Store and when I tap App Store I just get a white screen with the heading Genius for Apps with a white screen and no active keys.

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

Maybe you are looking for

  • Toshiba Satellite L675D-S7104 wont start up

    Looking for help! I was having problems with IE not responding so decided to upgrade to internet explorer 9 during process I needed to know if I had a 64 or 32 bit. So I minimized to check on my start menu and all my icons were gone. After pulling up

  • Cm:select performance problem with multiple likes query clause

    I have query like <br>           <b>listItem like '*abc.xml*' && serviceId like '*xyz.xml*'</b><br>           Can we have two likes clauses mentioned above in the cm:select. The above is executing successfully but takes too much time to process. <br>

  • Jsp page opening pdf file stored in an ORDDOC type column

    Dear All, i am building a jsp page that opens a pdf file stored in database. if column type is BLOB, i run the prepareStatement and store in a ResultSet, and then BufferedInputStream(result.getBinaryStream("FILE")). it works. page opens the pdf file.

  • HR-ABAP - By using PNPCE - LDB.

    hi, I want to add the fields values of table pa0033. The fields are (Aus01, Aus02,Aus03----Aus20). But these are character fields. kindly guide me.

  • S5220f login

    I have an HP Pavilion Slimline s5220f with Windows 8.  The computer is shared by multiple family members and a number of their user accounts are giving this error message when attempting to login: "User Profile Service service failed to logon.  User