ITunes 7.7 hanging on exit, tips on how to completely uninstall?

Great, my install of 7.6 was fine until I decided to enable Library Sharing over my home network, then that's when all the problems started. After that, I could not exit out of iTunes. It will always hang and I have to use the Task Manager to force exit, which means a lot of the settings arn't saved.
I updated to 7.7 and the problem persists. I've even tried manually uninstalling all traces of Apple software on my computer (including iTunes, Apple Mobile Support, Bonjour, Quicktime, Apple Updater) and the various folders and files in the Vista User folder and Program Data folders.
Does anyone know a better way to COMPLETELY wipe away all signs of Apple on my computer so I can try a true fresh install? Because even if I delete those files, the reinstall of iTunes still has some old settings. Im assuming it's somewhere in the registry.
Anyways, does anyone know of a fix for this? Is there some kind of software conflict or anything? This happens even if I don't plug my iPod in. In fact, pluggin in my iPod and ejecting it works fine. It's mainly the exiting of the iTunes app.
I'm on Vista x64 SP1 with all updates.
C2D 3.33GHz
4GB Ram
8800 GTX
Note: I've also noticed that it crashes when I uncheck the "Look for Apple Remotes" checkbox in the Preferences.
Message was edited by: ElectricBrain

My god!! Ok i found the fix.
Im just going to leave it here for others.
http://www.eset.com/support/kb.php?option=com_kb&Itemid=29&page=articles&article id=760
Turns out it was Nod32 2.7 causing iTunes to bugger up.
Woohoo!

Similar Messages

  • How to completely uninstall iTunes 8 ?

    Hi,
    I would like to know how I can completely uninstall/reinstall my iTunes 8 as administrator without affecting the users iTunes libraries.
    For uninstall I was following http://support.apple.com/kb/HT1224 which is for iTunes 7 and doesn't seem to work for iTunes 8 equivalently. What additional files am I missing? When trying to reinstall iTunes 8 from .dmg, the Installer stills tells me that I am about to recieve an update rather than a new installation....
    Thanks a lot, Joe

    Go to HD>Library>Receipts and remove the receipt for iTunesX.pkg.
    When the installer looks it will see no receipt. The only actions that I have done in the past to reinstall iTunes is to be sure I have a good b/u of the music files as well as everything in the iTunes Folder. I trash the iTunes app and remove the receipt then reinstall.
    MJ

  • What has happened to Itunes it no longer will start. I did a complete uninstall and reinstall per innstructions and the same occurred? This is the second update screw-up in a row.

    Since the recent update Itunes fails to start with no error messages. What gives?

    the second article did offer a suggestion that SEEMS to have helped ::crosses fingers:: - an about:config, resetting of the preferences for images. we'll see how long it lasts. THANK YOU SO MUCH for the suggestion, the article wasn't one i'd found while searching for troubleshooting info.
    Java script is enabled, but the persona's stuff still isn't working. dang it. WELL, one thing seems to work now, at least. thank you.
    Pax, km

  • TS3694 how to completely uninstall and reinstall itunes

    my itunes system told me to reinstall irunes i uninstalled it and now while reinstalling itunes, it comes up with (cant install GEAR drive).  How do i solve this problem

    Oke first, you are installing iTunes as an Administrator ??
    Else
    have a look here:
    http://www.gearsoftware.com/support/forum/viewtopic.php?t=1529
    Quote from that site:
    The driver installer on our website should create a log file called DIFxInstallLog.txt in the x86 or x64 dirs in C:\Documents and Settings\All Users\Application Data\9727E41D-AD6A-47cd-B9BC-CF630B6013FD\ on XP and C:\Users\All Users\9727E41D-AD6A-47cd-B9BC-CF630B6013FD\ on Windows 7.
    This log file may indicate when the driver installation is failing and why.

  • How to completely uninstall itunes.

    My ipod touch 4th generation stopped syncing so i'm wondering how to completey remove it.                          thx in advance.

    The following provides a link for Win7/Vista
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Also try the following if iTunes does not see the iPod:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    If you are getting an error message tell us more information and maybe we can help you.

  • How to completely uninstall itunes from the computer.

    Hello. Everytime I uninstall itunes 7 and want to install older version, I have a message saying that a new version is and can run or something like that. I would like to uninstall completely to install older version to see if that works with my ipod version 1.1.1
    thanks

    It's probably your iTunes library files that are messing things up for you. Make sure iTunes is closed, then go into "My Music" found in "My Documents", and then open the iTunes folder. There's an iTunes Library.itl (you might not see the file extension) and an iTunes Music Library.xml. There should also be a Previous iTunes Libraries folder. Delete both the first two files I mentioned, and go into the Previous iTunes Libraries folder. Copy the library that is dated on the day you upgraded to iTunes 7. Paste it in the iTunes folder (the one where the files were that you deleted. Then rename the file to just "iTunes Library.itl". You should then be able to open the older version of iTunes.

  • ITunes 7.7 hangs system on exit

    I never had a problem with iTunes until the 7.7 upgrade.
    The system hangs when you exit iTunes.
    Is there a solution to this?

    Hi Danewatson,
    I am in the same boat...
    I have iPods since the 3rd generation and never had a problem with iTunes until I have upgraded to version 7.7.1.
    iTunes hangs on exit and make a very high usage of the CPU. I only can go out using Task Manager.
    I already uninstall it, clean registry and re-installed it but no improvement. i tried with an old version of iTunes that I had saved but it did not recognized my library, because it was created with a newer version.
    In the beginning I thought it was XP problem but I see that a lot of people is having problems with this 7.7.1 version.
    I hope they (Apple) upgrade urgently for a new version, as i think thats the only solution, or somebody around knows about other??

  • ITunes 10.6 hangs on Windows 7

    iTunes 10.6 hangs on Windows 7  on iTunes startup.  My current page is the iTunes Store, and I see iTunes start up, and the progress bar on the top line shows "Accessing iTunes Store..." with the stripy progress bar moving for about 10 seconds.  Then it stops moving and the whole application hangs, with the Windows 7 spinner telling me to wait.  No Windows controls work (I can't close the window or stop the application).  At this point, I have to either reboot or use Task Manager to kill iTunes.  No amount of waiting works, and uninstall / reinstall iTunes does not resolve the issue.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Firefox 4 Hangs on Exit even in safe mode Win 7 x64

    Whenever I close firefox 4 using the upper right "close" button in Windows 7 x64, it hangs in memory. The windows themselves seem to close properly, but I cannot start firefox without using the "end process tree" function in task manager. If, however, I use the firefox menu-->exit, this behavior doesn't happen. Firefox will close normally. This even happens in safe mode. I have tried re-installing firefox to no avail. I have even disabled AntiVir free with no success. I have not yet tried to disable windows defender, but that shouldn't be problematic. Any answers out there? Anyone with similar problems? I run a clean system, and I'm very tech savvy, but this one just boggles me.

    Solved? Ok, so I think I fixed this myself. Originally, re-installing firefox after an uninstall (w/ option to delete profile) did not work. Here is what did work for me:
    <br />
    -Complete uninstall of firefox w/ option to delete profile<br />
    -Manually delete entire profile under c:/users/NAME/app data/roaming/mozilla (yes, information will still be there even after a complete uninstall of firefox)<br />
    -Update any other mozilla products (for me, Thunderbird... it turns out the older version was somehow sharing plugins and profile directories)<br />
    -Download firefox 4.0<br />
    -Install w/ defaults<br />
    -disable all plugins manually (go to add-ons and select "disable" for each... why are there plugins you ask? well, some things like Adobe reader, etc... will automatically load in when firefox is installed if that particular program is already on your computer)<br />
    -enable only basic plugins (for me, flash, java, and silverlight)<br />
    -change settings as preferred (my changes were all in the privacy settings)<br />
    -close and reopen firefox (I would recommend doing this at every minute step so you can troubleshoot what happened)<br />
    -add plugins/extensions one at a time, reset firefox (option given once a plugin is installed), configure the plugin, close firefox, open firefox, repeat and wash for each plugin...<br />
    -if any plugin/extension causes a hang, disable it. "End tree" in task manager for the hung firefox. Start firefox. Disable plugin. Do not "Restart" firefox at this point, as it will hang. Instead, use firefox-->close. Then, go in and try enabling the plugin, configure it, and the restart. If all is good at this point, leave the plugin. If not, wash, repeat, leave it disabled and move on without it at this point.<br />
    -run your firefox sync<br />
    -enjoy a working copy of firefox.<br />
    The essential point is to CLEAN EVERY POSSIBLE THING OUT and install the bare minimum, then add parts incrementally and determine that every increment works. Simple, straightforward, but not always obvious.
    I hope this helps...

  • ITunes on Windows hangs when in ringtone editor

    iTunes on Windows hangs when in ringtone editor. I get this quite often when editing a ringtone and it hangs for 1+ minutes (had it come back after 1 minute once but other times over 5 min and killed iTunes to get control again). This plus the iTunes + songs not letting you make a ringtone (they should have cought that in QA unless they skipped QA on this).
    Brian -- just wanting ringtones for my iPhone.

    Try this
    Go into the control panel, add/remove programs. Uninstall iTUnes, Apple mobile device service, apple application support. Then go out and redownload and reinstall iTunes and try again.

  • Program hangs on exit

    Hi Everyone,
    I'm having trouble with the java virtual machine or maybe some class may be causing this too. Windows and everything else completely hangs once I exit from my program.
    This just happens with some programs. I have been working on a project for a couply of weeks now, and there was absolutely nothing wrong. Then today the program starts to hang on exit. I have seen this happen with other programs as well, even demos i have downloaded from java.sun.com
    Like I said, the programs works fine, just when you exit your stuck.
    I have tried both exit methods which have worked fine in the past:
    addWindowListener(new WindowAdapter()
                   public void windowClosing(WindowEvent e)
                        System.exit(0);
    as well as:
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    I believe I set up the exit properly, since it has been working for the last couple of weeks and in all my other projects.
    I can't seem to isolate what change to the program caused this. I thought it might just be an increase in size of the program, but even small demos from java.sun.com crash on exit.
    If anybody has any ideas why this is happening can you please help me, i would really appreciate it.
    I should mention I run Windows XP, and I have j2dsk1.4.1
    Thanks in advance for any reply's.
    Arie Trouw

    I have also experienced this problem. The "easiest" way to reproduce it is to get JHotDraw 5.3 and just run up the sample app on Windows XP. Windows XP will hang when you attempt to exit the application(making it difficult to work out exactly what caused the hang). Running under a debugger (Eclipse) the hang is on System.exit, not the window.dispose or anything earlier. I can confirm that this is a problem with
    1.4.1-b21 and with
    1.4.1_01-b01 (the most recently available download).
    I can also confirm that this is not a problem with the 1.3.1_04 or 07 releases.
    Using the -Dsun.java2d.noddraw=true flag gets rid of the problem for me on 1.4.1_01-b01 (thank you jbisotti).

  • While streaming internet radio via itunes, the music hangs up and stalls whenever i do anything online

    While streaming internet radio via itunes, the music hangs up and stalls whenever i do anything online

    Rode32 wrote:
    this issue just arose over the last month or so and no changes have been made to my bandwidth.
    Except for the following possibiblites:
    Your bandwidth might be being throttled by your internet provider.
    Your internet may have a fault.
    Perhaps your Wi-Fi security has been breached by someone nearby.
    Perhaps the other services (Grooveshark and Spotify) use a lower bandwith (I don't know).
    For numbers 1 & 2, try a speed check to see if your internet connection is as fast as it's supposed to be.
    For number 3, change your password to your Wi-Fi.
    For number 4, check the Bit Rate of each stream.
    On the other hand, if this new information that you added is fact ( it actually occurs if I even listen to music from my iTunes library, not just internet radio ), then perhaps iTunes is at fault and the best fix may be to repair iTunes.
    To repair iTunes, download the iTunes installer and when you run it, use the Repair option.            

  • HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
    Try disabling the computer's security software during the download and update.

  • DW CS3 Hangs on exit

    Has anyone else experienced a recent phenomenon where DW CS3 Hangs on exiting with Vista. This is new and started without any new extensions, but possibly after some windows updates. I'm running Vista Home Premium x64 with UAC off, and the error is:
    The program Dreamweaver.exe version 9.0.0.3481 stopped interacting with Windows and was closed.
    The Event ID is 1002 with a Task Category of 101.
    Everything works fine except when I am done working and try to close the program.

    Yes, it's starting happening for me 'recently'.  It started happening on my laptop running Vista.
    I've moved from XP to Windows 7 Ultimate on my desktop and it now happens there as well.
    This week, I moved from Vista to Windows 7 Home Premium (fresh install) on my laptop and it is still happening.
    I have found that if you open Dreamweaver and immediately close it without opening any files then it is ok, but if you open any file, close it, then close Dreamweaver then it just hangs. If you click the Windows close icon a few times then you get the 'look for solution', 'wait' or 'close immediately' options. If you view the crash details it says:
    Description:
      A problem caused this program to stop interacting with Windows.
    Problem signature:
      Problem Event Name: AppHangB1
      Application Name: Dreamweaver.exe
      Application Version: 9.0.0.3481
      Application Timestamp: 4600622f
      Hang Signature: 1e91
      Hang Type: 0
      OS Version: 6.1.7600.2.0.0.768.3
      Locale ID: 2057

  • Premiere Elements 8 hang on exit - fixed

    All,
    As I posted earlier here: http://forums.adobe.com/message/2435573#2435573 The "hang-on-exit" bug is now fixed in our latest beta drivers version 195.81. You can find those drivers here:
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    As a bonus, these drivers also fix a few issues with GPU accelerated Flash rendering, and fully support the Flash 10.1 beta 2 release, in case you are interested.
    Regards,
    Barthold

    Barthold,
    Thank you for posting and nVidia for the work on these issues.
    Appreciated,
    Hunt

Maybe you are looking for

  • Cfchart scaleto still doesn't work in CF8?

    I saw numerous posts on here and other forums about how the 'scaleto' attribute in cfchart doesn't work right in CF7. But, I'm having the same problems with CF8. It still hasn't been fixed? I'm following along with Ben Forta's CF8 WACK in chapter 16

  • WS-Security Username Token issue with soap receiver

    Hi All, I have Proxy to SOAP scenario. Receiver web service is expecting below message in the soap header for authentication purpose. <soapenv:Header>       <wsse:Security> <wsse:UsernameToken> <wsse:Username>username</wsse:Username> <wsse:Password T

  • Capture excise duty

    hello sapers   when i do migo with for one line item .excise value is captured in migo correctly.   but for two or three line item it is either not capturing excise(means in migo values of bed aed ecess in not coming) or it is capturing wrong value w

  • When selecting one cell, multiple cells highlight

    When I am working with Excel 2010, I try to select a single cell however multiple cells get highlighted. It will highlight usually the next 5-6 cells in the same row. It occurs randomly on random cells, but happens about 25% of the time. If I click t

  • Authentication for user weblogic denied seen in Weblogic 8.1 bea logs

    I am observing the below error in bea logs of one of my managed servers. The managed server is in running state but the most of the Bridges are inactive with description "WARN: failed to connect to the source". Below is the error seen. ####<Mar 29, 2