Itunes 7.7 - problem with airport express remote speakers

I upgraded to 7.7 and when I try to connect to my remote speakers, itunes either does not play or the sound cuts in and out. Anyone have any suggestions?
Duq

Having the same problem have 2 Airport Expresses and have problems with one of them locking up and not appearing on itunes or in the airport utility anymore.
Switching it to ethernet usage to see if that helps or will try factory reseting it next.
Have already tried hard and soft resets.

Similar Messages

  • ITunes doesn't stream to airport express remote speakers

    Hi,
    Since I updated iTunes (v8.0) I can't stream audio to my remote speakers via airport express.
    The remote speakers are visible in iTunes, I can select them but airtunes can't connect. I don't get an error message, after a few seconds iTunes plays the music with my PC speakers. I did a firmware update for AX and had the latest version of the airport utility. I did a hardware reset and reconfigured the AX. I disabled the firewall. Nothing helps... Any suggestions?

    The next time you are in iTunes, click on the speaker icon at the bottom of the screen. You should be able to see your remote speakers and your computer speaker. Click so that both are on. Can you connect?

  • ITunes can't find Airport Express remote speakers after PC standby

    I use Airport Express 802.11n to drive my remote speakers over WiFi from iTunes. It works well, except for after my PC Laptop has been in standby (such as folding the screen). When it wakes up and regains network connectivity, iTunes can no longer find the Airport Express remote speakers. I can ping the Airport and it shows up in Airport Utility, so I have WiFi connection. It does not help to restart iTunes, I need to reboot Windows to allow iTunes to see the remote speakers again.
    Does anyone have a tip of how I can get iTunes to "refresh" the Airport Express connection (zeroconf/Bonjour issue?) after standby wakeup?

    Holy moly. Now it works.
    I restarted the Airport Express from the Airport Utility application, repaired persmissions and rebooted the computer as well.
    Not much of a "fix" but sometimes you gotta do the most obvious I guess. (And yes I feel stupid)
    Cheers

  • Problem with Airport express N (2nd gen)

    Problem with Airport express N (2nd gen)
    Firmware 7.6.4
    ISP - 20 Mbps ethernet cable
    I have MacBook Air 13 mid 2013 os x 10.9.5, ipad 4 ios 8.0.2, ipad4 ios 7.1.2 , iphone 5 ios 7.1.1
    When i try to use speedtest.net from my Macbook i got good results of download speed and incredible upload http://www.speedtest.net/my-result/3801286946 (connection 300 Mbps) , both ipads got terrible speedtest download result and incredible uploadhttp://www.speedtest.net/my-result/i/981631804 (connection 150 Mbps), iphone 5 got bad download and great uploadhttp://www.speedtest.net/my-result/i/981695357.
    All these tests were done near airport express with really good signal and 5ghz. I tried to choose different channels, 802.11 mode, guest ssid, 5ghz ssid ...
    I think that something is wrong with my new airport express. Can anyone help me to solve this problem?
    ps sorry for my bad english

    As a last resort, try a factory default reset on the AirPort Express as follows:
    Power off the AirPort Express
    Wait a minute
    Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
    Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
    On an iPhone or iPad home screen....
    Tap Settings
    Tap WiFi
    Look for a heading of Setup a New AirPort Base Station. If it appears.....
    Tap on AirPort Express just below the heading to start the configuration process on the Express again
    If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

  • PC based iTunes And multi play with Airport Express device and a Marantz CR-603

    I have iTunes on my PC and use the iPad as my 'remote' as I want to be able to have two different systems playing. I have a Cyrus Hi Fi in the lounge with  Airport Express added which works fine, and a Marantz CR 603 system in the kitchen which also works fine, when either is sourced from the iPad. When I switch to remote for multi-play using the PC I can't get the PC to identify the Marantz AND the Airport Express together. The PC just can't pick up the Marantz, even though it works fine from the iPad. The PC can see the Airport Express and, of course, itself. The system uses a hard wired Ethernet from the hub to the Marantz. Everything else is operating via wireless. Help!?

    I found a solution!
    Quit iTunes, restart the "Bonjour Service", start iTunes, done! :-)
    best regards,
    ullala :-)

  • Using apple remote with iTunes 9 and airport express/remote speakers

    Hi,
    Does anyone know why the apple remote will control the hardware volume for the speakers on my mac, but when playing via the airport express connected to remote speakers why doesn't it control the volume slider in iTunes?
    This would be really useful as at present I need the apple remote to control track selection and play/pause, but another remote to control volume.
    If it isn't possible now, can Apple please add it to the pile of suggestions for the next version build of iTunes?
    Many thanks

    luvs2spooge wrote:
    This would be really useful as at present I need the apple remote to control track selection and play/pause, but another remote to control volume.
    If it isn't possible now, can Apple please add it to the pile of suggestions for the next version build of iTunes?
    edit: it works just fine. check your settings in preferences > devices
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

  • When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

    I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
    We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
    We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
    We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
    We also have two iPhones that do use our local wireless network on occassion.
    We have stereo speakers that are currently connected into one of the Airport Expresses.
    For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express).  Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each).  So far, here's what we've tried to do:
    (1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house.  They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely.  Spent a couple of hours setting everything up.  No dice.
    (2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
    (3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu).  The computer does this at random intervals on a regular basis.  The skipping, however, will occur even if the menu is not selected.
    (4)     Here's the weirdest part.  The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down.  In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals.  In this situation, the skipping only seems to occur when the menu is selected.
    At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it).  But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem.  I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
    Any help would be most appreciated!

    Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
    In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

  • Multiple Speaker Problem with Airport Express

    I'm having an issue with my Airport Express in selecting Multiple Speakers. I have one Airport Express located in the Living Room, and have no problem playing music on that directly from iTunes. However I cannot play there and on the Mac at the same time. An error message comes up:
    An error occurred while connecting to the remote speaker "Living Room". An unknown error occurred (-15000).
    I can clear the error and then go back to listening either in the living room or on the computer, but not both.
    I have tried reinstalling everything...iTunes, Airport, Mac OSX, you name it.
    Any ideas anyone?

    I may have a solution for you Shannon. My solution, found after a lengthly Apple Support call, applies to Tiger 10.4.11 however it likely applies to Leopard as well. The problem is with your Firewall settings which may be blocking UDP access and or have it operating under a Stealth Mode. It must be set to allow UDP Traffic.
    In 10.4.11 under System preferences/Sharing/Firewall under the Advanced button there are three checkboxes "Block UDP Traffic" "Enable Firewall Logging" and "Enable Stealth Mode". Uncheck all three of these boxes and it should work.

  • Problems with Airport Express in Router mode

    Hi all!
    I have an Airport Express and a PC home network (WinXP, Win2k and one Powebook). I have Itunes turned off and updated the firmware to 6.3. My Test PC is updated with all the latest updates. All of the Computers have Wifi G cards and are switched to Windows XP zero config wireless.
    I tried to configure the AP express both with the config wizard and the manual Airport admin utility on several computers. I have it configured to 128bit WEP security.
    I have no proxies or anything of that kind. Also tried disabling all firewall software.
    I have a DSL connection with Aztec DSL600E Modem which was previously configured as a fixed line router (its not wireless).
    I spent days at it but could not get the AP to replace the modem as router. The modem is configured to use PPPOE/PPPOA (tried both).
    When I configure the modem to stop being a router (I think this is done by selecting its "Server and Relay Off"
    option (it has either Server on, Realy on, or the above) in the Modem's DHCP configuration screen.
    Well when I do this, and configure the AP to distribute IP addresses (share a single IP) and "connect using PPPOE" connection, its light goes green but none of the computers can browse the internet, it just goes to "page not found" after a while. The PC's also then report a conflict in IP address.
    On the other hand, if I restore the modem to act as router, configure the AP as a Wifi bridge-to use Ethernet and not to distribute IP's, internet does work but slower than normal. (Not bandwidth, its the DNS lookup that slows things down I think, whenever trying to go to a new web address it takes several seconds to look it up before it says "web page found" on the bottom of the IE browser). If I disconnect the Wifi and connect one of the clients directly to the DSL modem, the DNS lookup takes seconds.
    I tried clearing the Cache, resetting the AP, doing IPconfig /release and /flushdns etc.
    Internet speed tests like DSL Speed test report latencies of 800ms sometimes.
    So i'm thinking that there is some conflict in the DNS or DHCP between the modem/router and the AP.
    What is better? leave it as is or try to get the AP to act as router and the modem as only a modem?
    All of my clients are set up to have automatic TCPIP configuration with DHCP.
    Also I wanted to ask:
    1) What does "domain name" and "DHCP client id" in the AP Admin utility / internet tab?
    My modem config screen has a "Management IP" section with:
    IP Address: 10.0.0.138
    Netmask: 255.0.0.0
    Default Gateway:xxxx
    Hostname: xxxxx
    Domain Name: xxxx
    Are the last two the same as the AP refers to as domain name as DHCP client ID?
    and why do I need a domain for just a home network?
    and why are the last two fields full in the modem screen if I don't have a domain?
    2) From what I remember of routers, they should have some place of configuring the peer to peer network name (workgroup) is that what they mean by "hostname" or "domain name"?
    The problem is that this Aztec model has no online manual. And the other models Aztec manuals don't go to such advanced details. And my ISP doesn't give support for sharing with routers (it is allowed but not supported). They will just say buy our monthly plan with WIFI etc.
    I would like to share files as well as internet access.
    3) What does the "Enable default host" option mean in the AP config network tab?
    4) What does the "Relay on" field mean in the Modem/router DHCPConfig screen?
    5) How do I ensure there is no conflict between the AP and modem/router, and that they use the most efficient method for looking up DNS's?
    Attached are links to screenshots of my configurations.
    http://new.photos.yahoo.com/nebula3012/album/576460762403680970
    (double click the pics to open them).
    It seems so complicated, a few years ago I set a 3COM Wifi router in a PC environment (Cable Internet) and was working within hours.
    by the way in the AP config summary it all looks normal except the "LAN MAC Address" which is empty.
    Thank you for your help... ** really..

    nebula3012, Welcome to the discussion area!
    1) What does "domain name" and "DHCP client id" in the AP Admin utility / internet tab?
    If those items are needed, your ISP will provide them to you.
    2) From what I remember of routers, they should have some place of configuring the peer to peer network name (workgroup) is that what they mean by "hostname" or "domain name"?
    No
    3) What does the "Enable default host" option mean in the AP config network tab?
    It allows you to configure a device as a server. All of the ports of that device will be directly addressable from the internet.
    5) How do I ensure there is no conflict between the AP and modem/router, and that they use the most efficient method for looking up DNS's?
    You worry too much. There is nothing special to do.

  • ITunes can't see airport express remote speakers using airtunes

    Running Windows Vista, I have been through the process of joining the Airport Express as a client to an existing wireless network and have got a green light showing (hurrah). iTunes is not, however showing the option of selecting that AE to use as remote speakers.
    I have checked that the 'look for remote speakers....' option has been selected in iTunes and have opened port 5353 UDP on the Windows firewall, and have tried turning the firewall off altogether, but still no joy.
    As with other Vista users I can't see the AE using the Admin Utility, but I can get to it using 'Other' and the IP address that the DHCP server on my wireless router (Buffalo) has issued. On the music tab on the Base Station the 'Enable AirTunes on this base station' check box is connected.
    So it seems that everything is good to go, just that iTunes doesn't display the base station as an option to select in iTunes - can anyone help? Thanks

    Oh. My. God.
    Who knew that the "multiple speakers" window can be resized?
    Quite by accident, I discovered my other two AE's "hiding" outside the window...
    Sheesh.

  • Macbook has Problems with Airport Express newtork

    I am using an Airport Express at home. I have my 20" iMac (OS 10.4.11) connected to the network with no problems. When I try to access the network with my Macbook (OS 10.4.10) I have all kinds of problems: I often can not find the network, when I do get onto the I get really slow download speeds (~3 mins for a web page), after waking the Macbook from sleep it can not find the network unless I restart. I even have these problems when the Macbook is right next to the airport (< 1 m).
    I don't believe it is a problem with the Airport because my iMac connects perfectly from about 4 m away through the floor.
    I don't believe it is the Macbook per se because I can connect to any open network without problems.
    It seems to be the odd combination of the Macbook with the Airport.
    Does anyone have any suggestions for addressing this issue?
    Thanks in advance.

    Network
    Plug the AE next to the PLC and connect it to the Ethernet port of the PLC.  Configure the AE to operate in bridge mode.  If your PLC doesn't offer an Ethernet port, use one like the Netgear XAVN2001.  If it's already taken, you will need a 4 port switch.  You will also need a long 3.5mm audio cable if the amp is not in the proximity of the PLC, available from Amazon for under $5.  Finally, create a separate wireless network on the AE.
    Client
    Connect the client to the AE's wireless network, not your existing network.  The client in this case is an iPxd or other computer with iTunes or Airplay/similar PC.
    The above basic configuration works flawlessly in my experience.  If the Client is to distant from the AE's wireless, you can, as a second step, connect it to your existing network, but be forewarned that in this scenario dropouts abound and the AE frequently disappears from view.

  • Problems with Airport Express & Airplay

    Hi Guys, I'm having a lot of problems using my Airport Express as a bridge, and Airplay.
    I have a wireless network set up with various repeaters through our (large) house, and wanted to set the Airport Express to extend the wireless range into the kitchen, and to work as an Airplay port for the stereo which is next door.
    The main network is a cable modem into a wireless router, which is then repeated with 85M PLC Adapters throughout the house. 
    Had alot of trouble setting up the express unit - have re-set it to default settings numerous times. Managed to get it set up to repeat the signal and act as an airplay once, but the performance was very poor - i.e. sound dropping out, losing connection. It also wouldn't connect using iphone or ipod, again even when it had 4 bars wi fi reception.
    I then tried setting it up purely to join the existing network, not to repeat it. and act as an airplay port; and it connected, said it worked, but then I couldn't play any music through it, and it went back to flashing orange.
    The Airport Express is in the same room where I'm typing this and has 5 bars of wi-fi signal strength.
    I've tried the few things I know - anyone got any bright ideas?
    Makro

    Network
    Plug the AE next to the PLC and connect it to the Ethernet port of the PLC.  Configure the AE to operate in bridge mode.  If your PLC doesn't offer an Ethernet port, use one like the Netgear XAVN2001.  If it's already taken, you will need a 4 port switch.  You will also need a long 3.5mm audio cable if the amp is not in the proximity of the PLC, available from Amazon for under $5.  Finally, create a separate wireless network on the AE.
    Client
    Connect the client to the AE's wireless network, not your existing network.  The client in this case is an iPxd or other computer with iTunes or Airplay/similar PC.
    The above basic configuration works flawlessly in my experience.  If the Client is to distant from the AE's wireless, you can, as a second step, connect it to your existing network, but be forewarned that in this scenario dropouts abound and the AE frequently disappears from view.

  • CONSTANT problems with Airport Express in two rooms, dropped connection with gateway, no AirPlay

    I have 3 Airport Express in my apartment, one is connected (named Living Room) to my ISP provided gateway (router) and acts as the main wireless hub, the other two (named Kitchen and Bedroom) and are set up to provide AirPlay audio only.
    The ones set up for AirPlay have had constant issues since we moved to our new place 4 months ago, this is very strange because we were with the same ISP in the old place and used the same gateway (router) without any problems which leads me to think that there is something in the walls in the new place which is blocking an effective signal.
    Even as I type this, I have Airport Utility open on my Mac and a message just popped up from AU saying that 'Living Room is unavailable'.
    Attached is a screenshot which shows the current status of the Airport network. Basically it is a mess, and I have tried everything, from resetting the ISP router and all the AXPs, to changing the Network Modes to experimenting with repositioning the units to points in rooms where the reception might be better.
    NOTHING has made any difference.

    Sorry, have been away for work so only just had a chance to look again at this:
    I'lll try again: right now using WiFI Explorer I can see 9 other networks, 3 of those are using channel 11, the same as my Airport Express network. (Set to Automatic in Airport Utility)
    What I tried to explain earlier was that the one in the kitchen will not stay connected long enough for me to get a reading on WiFi Explorer, but I can tell you that I powered up the one in the bedroom at 19:56, it is currently connected in Extend Wireless Network mode (the one in the kitchen is disconnected from the power) and has an average SNR of 59dB (and shows as 'Excellent' in Airport Utility) and so far it has not dropped the connection, but I am 99% certain that it will be back to blinking amber by tomorrow.
    So there is one Airport Express in the living room which is the one that has created the wireless network, within the living room the Average SNR is around 60% (as you would expect as that is the unit that is wired to the ISP provided router).
    Since I connected the one in the bedroom earlier this evening it has managed to stay connected and appears to still be extending the network, I checked it just now by standing next to it with WiFi Explorer open on my MacBook Pro and it showed an average SNR of 55%.
    I ordered a 10 metre ethernet cable yesterday and I will try relocating the unit that is set to create the wireless network to a place in the living room that is closer to the bedroom and kitchen. It is currently on a shelf on the TV bank which is about two metres away from the wall closest to the kitchen.
    I will report back here once I have moved it and set up the kitchen and bedroom boxes again. Hopefully this will allow the kitchen one to stay connected long enough for me to get a reading on WiFi Explorer.

  • Problem with airport express extending wifi from extreme

    My setup is an airport extreme wired to the internet with two iMacs connected by wire and an airport express to extend wifi from the extreme to the further parts of my house.  When originally installed about a year ago this arrangement worked perfectly, but I noticed a few weeks ago that neither my iphone, ipad, nor my MBP 13" is connecting to the aitport express anymore and the network extension is not working as intended.
    Last night I investigated the isue and found that the express is connected wirelessly to my extreme because when I wired my MBP to the express and turned off the wireless connection it could still reach the internet.  But, even with the express sitting plugged in next to my iPhone I could not get it to connect to the express - it always uses the extreme and while I'm in range there is no problem.  The problem is that my house is old and the wals tend to cause problems with reception and I can't get wifi in the garden and some parts of the house.
    I have the express and the extreme configured to allow access only by the client macs that I have provided and it looks like the two devices share this information when they are in extend mode (but not sure about that).  When I set up the system I added the aitports mac addresses to the approved list in the access control screen, which seemed to be necessary then though I removed them (the airport mac addresses) fromt he list last night to see what effect this had and biefly the airport did connect to my MBP.  But after returning it to its location where it usually is I have not been able to reconnect to it.
    In brief;  I have an airport express extending an airport extreme wifi, it used to work, but now all wifi clients will only connect to the master.  I have a suspicion that a recent airport update has caused this (both airports are up-to-date) but can't be sure.  I have the express correctly configured to extend the wifi of the extreme as it was originally working.
    One thing I have noticed - I had the express set to use a fixed IP by setting 'static' in the internet screen - this is not the current setting (it's reverted to DHCP) and I cannot force it to update to and remain set to static.
    Does anyone know how I can restore the correct functioning of the express as an extension of the wifi network?
    Thanks
    Damon

    Perform the Factory Default Reset one more time. Hold the reset button until the amber light has been blinking rapidly for 8-10 seconds before you release the reset button
    Run the setup wizard, and wait for screen similar to this to appear, then click on Other Options:
    Select the Add to an existing network option, then click Next and follow the prompts.
    If you are still having difficulty, try running the setup utility on an iPhone or iPad, since Yosemite has a number of bugs in the setup process.

  • Numerous problems with Airport Express 802.11n with DSL and extending WLAN

    Hi all,
    I have the following hardware:
    802.11b/g Airport Express with firmware 6.3
    802.11n Airport Express with firmware 7.3.2
    MacBook Pro
    iBook G4
    Mac Pro PowerMac 2x450 G4
    Up until now I had been using the old Airport Express as the base station connecting to my PPPoE DSL line, and it worked fine. I wanted to extend the range of this network, and got another newer Airport Express, the 802.11n model.
    First I tried to use the 802.11n to connect to the Internet and the old one to extend the network. Turns out the old one can't be used to extend a network, which is bad enough, but the 802.11n one refuses to connect via DSL for more than a couple minutes, then drops the Internet connection.
    So I tried downgrading the firmware to 7.3.0 and 7.3.1, but it didn't help. Did a hard reset, factory default reset, soft reset, nothing worked.
    Next I tried swapping the two, putting the old Express back on the DSL line and the new one as the bridge to extend the network (using WPA2). But the 802.11n complains that it can't access the network and flashes amber.
    Again, tried upgrading to 7.3.2, downgrading to 7.3.1 and 7.3.0, hard reset, soft reset. Nothing works.
    Any ideas?
    Cheers,
    Fairfax71

    I don't see any option in the Airport Admin Utility for the old Express for creating a WDS network, only to participate in one...?
    That is the option you want to choose.
    You could use the newer AirPort Utility to configure the older AX.
    Sorry, forgot to ask something else: The 802.11n Express is able to join the WLAN created by the 802.11b/g Express as a client, but not extend it, is that what you're saying?
    No. If you join the network the AX is simply acting as another wireless client and is not extending the network. The "extend" option is not available since the older AX is not 802.11n capable. You must use WDS.
    Use AirPort Utiity and follow these steps for both AX's. To set up the main AX:
    Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
    Open AirPort Utility (located in the Utilities folder in the Applications folder on a Mac, or in Start > All Programs > AirPort on a Windows computer). Select the main base station, and choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary. If the base station is using the default password of public, you will not be prompted for a password.
    Click the Wireless button, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
    Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
    Select the “Allow wireless clients” checkbox if you want client computers to connect to this base station.
    Click the Add button and enter the MAC address of the base stations you want to connect to this base station. If there is a base station listed that you’d like to remove from the list, select the base station and click the Delete (–) button.
    Click Update to send the new settings to the base stations in the WDS. By default, the “Allow wireless clients” checkbox is selected. If you deselect the checkbox, and later want to change the settings on the base station, you must connect to the base station’s LAN port with an Ethernet cable. You will not be able to connect to the base station wirelessly.
    To set up the second AX to connect to the main AX:
    Open AirPort Utility. Select the AX, and choose Manual Setup from the Base Station menu. Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
    Enter the same network password as the main base station, if necessary.
    Click the AirPort button, and then click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
    Click WDS and choose “WDS remote” from the pop-up menu.
    Enter the MAC address of the main base station in the WDS Main field. The MAC address is also referred to as the AirPort ID and is printed on the label on the bottom of the base station.
    Click Update to transfer the settings to the base station.
    This can be found on page 42 of "Designing AirPort Networks Using AirPort Utility" (direct PDF download).

Maybe you are looking for