ITunes 7&8 will only start once per install on Vista 64-bit.

This problem has been going on for quite awhile (but not always). iTunes works great immediately after install and will play and run forever until closed. Once closed iTunes no longer will start (even after restarting computer) until completely uninstalled and re-installed. Repairing does not fix it. This happens with iTunes 7 and the newly released 8.
Any ideas?
Thanks.

I've tried that several times now. It's a brand new computer, never had iTunes on it before, and I get the same issue. I even used restore discs to restore the computer. I tried running the install program straight from the web site, downloading the program and running it from my hard drive... I'm fresh out of ideas. I just keep getting the same "errors were encountered during installation" generic message.

Similar Messages

  • Dreamweaver CS4 on Win7x64 only starts once per session

    Hello.
    I use DW only occasionally so I didn't notice that whenever I exit DW I am unable to restart it during the same windows session.  If I try to open it a second time, nothing happens.  However, if I log off as a windows user and then log back in, I can run DW again (but only once).
    Does anyone else have this problem on windows 7 64 bit ?  Is there a work around ?
    If it matters, my version is 10.0 build 4117.

    Ok.  While trolling thru other posts, someone asked about using different compatibility settings.
    So, ..... I right clicked my desktop icon to start Dreamweaver and selected Troubleshoot compatibility.
    During the windows wizard that runs, I eventually established the successful compatibility settings "Compatibility mode: Windows Vista Service Pack 2"  and "User Account Control: run as Administrator".
    After saving these settings, I am now able to run DW multiple times without any problems.
    I will be interested to see if I do not experience the other Windows 7 problems I see in the forum postings.
    Compatibility settings may be a way to avoid these issues.

  • Firefox will only open once per login

    This started acting up i think around when i updated firefox when i was opening it. It only allows me to have one firefox window open. The tabs work find but i can't move tags to new windows, can't get on chat sites cause they require another window to open and i have to restart my computer if i close firefox window. I've cleared the cookies on here but doesn't seem to help.

    You can make a copy of the Firefox desktop shortcut and open the Properties of that shortcut via the right-click context menu.
    You can add a space and the "-new-window about:blank" text without quotes to the current command (target) line to open the about:blank in a new window if you use that desktop shortcut to launch Firefox.
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • ITunes and Quicktime will not start on new PC using Vista

    Hi everyone,
    I just bought a new PC using Vista "Home Premium" edition. No previous version of iTunes on PC. I downladed iTunes 7.6. When I try to start iTunes Windows error msg says "iTunes has stopped working check on-line for a solution and close the program". When I click on the link provided it just brings me back to the same page where I already downloaded iTunes 7.6! When I try to start Quicktime I get the same error msg.
    Any suggestions on how to fix the problem?
    Thank-you in advance for your help.
    Nat

    I had the exact same problem. Just use this article:
    http://support.apple.com/kb/TS1717
    What ended up happening for me was that it was a user-specific problem. For that, just follow these steps (taken from the above article):
    Remove iTunes Plug-ins
    third-party iTunes plug-ins can cause many issues, particularly if the plug-in has not been updated to be compatible with new versions of iTunes. iTunes plug-ins are located in the following location:
    C:\Users\username\AppData\Roaming\Apple Computer\iTunes\iTunes Plug-ins
    Remove iTunes Preference files
    Some of the files that iTunes uses to store settings and preferences may be corrupt and cause issues. iTunes has two folders where preferences are saved. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The location for the two preference folders are:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Hope this helps.

  • Itunes will only start up once

    hi
    i think i need some help! i've had problems mainly due to my own studipity! i installed the standalone quicktime and that sort of helped. but now itunes will only open once if i close it down and try to open it again it wont open. i have to restart my pc. i also have to acept to the terms and conditons when it opens.
    i also havent been able to access the music store today not sure if its just me or itunes is having trouble.
    i'd really appricate any help
    i've never posted on a forum before so if i've left any vital info out let me know!!
    thank you

    we're still not done yet.
    actually, the odd thing about your case is not so much that you aren't able to open itunes again ... it's that you can open it again after you restart the PC.
    so let's try an experiment.
    get itunes running again. while it's running, launch your Task Manager, and go to the processes Tab.
    you should see an "itunes.exe" process in there.
    now close itunes down.
    does the itunes.exe process persist in Task Manager sfter you shut itunes down?
    if it does persist, try shutting that process down in Task Manager.
    if you can do that, are you then able to launch itunes again (without shutting your PC down first)?
    love, b

  • I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

  • I downloaded the lates version of iTunes. Now, every icon on my desktop now is the iTunes icon and will only launch iTunes. The same is true with almost everything in "All Programs" from my start menu. Uninstalling brought desktop back to normal.

    After upgrading to the latest version of iTunes, it changed all desktop icons to the iTunes icon and will only launch iTunes. I uninstalled and reinstalled iTunes and the same problem occured. Help.

    Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.

  • TS1424 when i open itunes store i will only see a white screen

    when i open itunes store i will only see a white screen and i can't see anything
    please someone help me

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My iPod Classic (the older version) will only start up, what to do?

    My iPod Classic (older version) will only start up but as soon as it starts up it turns itself off again and it makes quite a loud clicking sound when it turns itself off, I have had it plugged in for quite a while and in the first 30 minutes of having it plugged in it said very low battery but then turned itself off, I have tried resetting it with the menu and the middle button and I can't connect it the computer that it has been synced with either, I really need my iPod and I really don't know what to do to fix it, is it the battery or the cable or something small like that? I'm not sure whether it is charging from the wall socket either.

    - After being connected tot a charging source for half an hour, reset the iPod.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Connect the iPod to your computer and and if it shows in iTunes restore the iPOd.
    - Next see if placing the iPod in recovery mode will allow you to restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Sorry I missed that you said you dried it in your first post.

  • I have reset my iPod because it had been locked out and I couldn't get back in, but it will only reset once it connects to a WiFi source. I cannot get onto my iPod to connect it to a WiFi source. How am I meant to reset/erase it?

    I have reset my iPod because it had been locked out and I couldn't get back in, but it will only reset once it connects to a WiFi source. I cannot get onto my iPod to connect it to a WiFi source. How am I meant to reset/erase it?

    Just what do you mean by " but it will only reset once it connects to a WiFi source."?
    If it it says turn off FIndMyiPhone then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • IPhone 5 will only charge once dead

    Hey everyone, I've got an issue that I can't seem to find any forum posts about anywhere.
    My iPhone 5 will only charge once it is completely dead. If it is not, I get a message displaying "This accessory is not supported by this device," (or something along those lines), or nothing happens at all. Once it is completely dead, I can charge it, but if I take the charger out before it's fully charged it won't begin to charge again until it's dead. Even if I turn the phone off and charge it, it does not charge while off unless dead.
    What I've already tried:
    - Different chargers (5 of them, 3 different charger blocks, and charging from my laptop, both Apple and third party)
    - Resetting all settings to factory default
    - Going to the Apple Store. They would not touch my phone because I replaced my own screen with a non-Apple piece
    Any ideas?? Please help.
    NOTE: I cannot update to the newest iOS as I cannot connect to iTunes until this problem is fixed.

    If changing out the charging unit and the cable doesn't work, bring the phone to Apple for evaluation

  • How to float a landing page to capture email address, only shown once per visitor to the site, and not on return visits?

    I would like to float a landing page to capture email addresses, that is only shown once per visitor to the site, and not on return visits OR after they submit their email not to be asked again.
    thanks guys!

    Hi Scott,
    Thanks a lot for the advice.
    Actually I added user names to the apex_access_control table and assigned each user the desired privilege but did not notice that I should do the following setting.
    *Access Control Administration > [RUN] > Set Application Mode: Restricted access.*
    Thanks,
    Guy

  • Firefox 4 beta8 will only start in safemodus but not normaly

    I use firefox 3.6.13 parallel to firefox 4 beta 8. Beta 8 will only start in safemodus, not in the normal form. In former time, beta 7 starts without any problem

    I have firefox 3.6.13 and 4.0b8.
    Beta is installed by default in a different location. I have also set it up with its own profile. I have not noticed problems. I am assuming the compatibility checker worked as it set itself up without firebug, as that was not compatible, I later installed a firebug alpha for the firefox beta.
    To create additional profiles the easy way use [[Managing profiles|Profile Manager]]

  • I am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

    i am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

    I assume there is more than ample space remaining on your iPod to hold all the videos?  Are you getting any error messages during the sync process?
    Do all of these videos play okay in iTunes?  Is the sync only checked songs and videos option enabled from under the iPod's Summary tab?
    What other setting do you have enabled from under the iPod's video configuration tab in iTunes?
    B-rock

  • FaceTime call to my iMac will only ring once then hang up and won't let me answer. How do I make it ring more times?

    FaceTime call to my iMac will only ring once then hang up and won't let me answer. How do I make it ring more times? I can call my iphone 4 from the imac with no problem but when I call my imac from my phone, it won't let me answer.

    This article is pretty long but it has a troubleshooting guide near the bottom, and especially mentions your problem with a few things to try.
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/

Maybe you are looking for

  • My Macbook is 2 years old and I have yet to see the wonders of Apple...

    Hello. Maybe someone can help me with my troubles here. I bought my Macbook a year and a half ago, it will be two years in June. The first night I took it out of the box, something happened to the hard drive. I took it into the genius bar and they ha

  • Payment Terms according to delivery and acceptance

    Hi, Is it possible to configure standard SAP payment term according to 90% Upon Delivery, 10% On Final Acceptance? Thanks, CW

  • Why do some songs have more bass?

    I have a track and the bass is over powering...............are the low frequencies just a higher decibel when the cd was recorded? I have subwoofers in my car and some songs have deeper bass as well............is this just reaching a lower frequency

  • PRO*C에서 에러 처리하기 (SQLSTATE, SQLCODE, SQLCA)

    제품 : PRECOMPILERS 작성날짜 : 1997-02-06 디자인상의 문제, 코딩상의 문제, 하드웨어 문제, 비정상적인 값의 입력 등등.... 프로그램을 수행하다 보면 다양한 에러들을 접하게 된다. 프로그램을 정상적으로 수행하기 위해서는 이들 에러에 대한 적절한 대책이 필요 한데, 특히 SQL문의 수행과 관련된 에러의 처리는 데이타의 무결성을 유지하고, 정확한 트랜젝션 수행의 기본이 된다. PRO*C에서는 SQL문과 관련된 에러를 처리하기

  • Spry 1.4 is now available!

    Your patience is rewarded! After delays and teases and previews, Spry 1.4 is now live on Adobe labs. http://labs.adobe.com/technologies/spry/ We have new Spry attributes, new state handling, nice enhancements to Effects, officially released the form