Itunes 7 displays incorrect Skip Count values

Using iTunes7,0 Mac and a 2GB 1st Gen iPod Nano
When I connect the nano, the skip count for songs that already have a (>1) skip count gets something like doubled.
For instance song X has a skip count equal to 8.
I connect the nano, then song X skip count now equals 16.
Looks like a bug no?
By the way, it seems that songs that I skip (within the 1" - 20" window) on the nano dont update their skip count in itunes, on the other hand, songs that I skip on my other G5 ipod have their skip count updated.

Installed version 7,0,1
Problem still exists

Similar Messages

ITunes Store displays incorrectly

Looking for a solution to the vertical display issue of the iTunes Store. I have tried turning off Firewall, no change. Also, have tried accessing through two different ISP's (cable and dsl).
Screen shot of the problem (note the icon does not load at bottom).
Thanks in advance for any suggestions you might have.

Yes, I'm getting this as well. I think it started for me quite recently, either when the Beatles appeared in the store or when I bought an Apple TV a week or so ago.
I've also seen similar effects in some web pages in Safari.
The problem isn't consistent tho, sometimes the pages in iTunes look okay.

Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Hi All,
Exception Aggregation (Average) displaying incorrect values after EHP1 Upgrade in our BW system
We have recently upgraded the system to EHP1. After the upgrade some of the queries where we are using Exception Aggregation (Average) started giving the incorrect values.
Eg. We are displaying three Key Figures KF1, KF2 and KF3 (=KF1 %A KF2) against Store Hierarchy. In KF3 we are using Exception Aggregation (Average) on a characteristic 0PLANT.
There are 14 rows against 0PLANT and out of those 2 rows are blank for KF1, so for KF3. When it is calculating the average of these key figures its dividing the total value by 12 instead of 14 which is not correct in our case. Earlier it was dividing the total by 14.
So in this case 'Average' and "Average of all values <>0" are behaving the same way.
Kindly provide some inputs on this.
Best Regards,
Sachin Verma
+44 7506740018

Hi,
Thanks for viewing the thread. And happy to let you know that the issue was resolved.
The solution was:
Two formulas (local) were created, one including the formula variable with replacement path for ZD1, with exception aggregation on ZD1, and the other with formula variable with replacement path for ZD2, with exception aggregation on ZD2. Both these formulas are hidden.
Another formula (local) was created for u2018time takenu2019 = formula with ZD1 u2013 formula with ZD2, with exception aggregation total on u2018ZDOCNOu2019.
For the second instance, when one requires exception aggregation on records that has multiple values for keys, a nesting of formulas can be done displaying only the ones required.
For e.g. a formula with exception aggregation on say characteristic u2018item no.u2019 can be hidden, and included in another formula for exception aggregation on characteristic u2018document no.u2019. This is a typical case where one can achieve calculation before aggregation for a calculated key figure, formula or a counter.
Hope it might help someone, and saves time and effort for a similar issue posted.
Also would like to keep this thread open for exploring better solutions.
Regards,
Vijay

Storage values under about this mac displaying incorrectly, but amount of space used IS correct. Any ideas?

I noticed recently that the "storage" under "about this mac" is displaying incorrectly. It doesn't show the correct values for my photos, videos, and audio files. It classifies this data under "other". I have been searching all over the internet, I went to the Apple genius bar yesterday and they recommended I re-install OSX. I did and it still shows up incorrectly. They were baffled, said they never really came across this issue. I have tried re-indexing spotlight, that didn't seem to help.
The amount of storage used IS correct. It just doesn't show up under the correct categories in storage, under about this mac. Also, the computer seems to work fine. No real issues. It's a mid 2012 MBP. 500gb hard drive. Most recent OSX is installed.
I DO NOT think it is local snapshots, cause my backups category is small and the amount of space used and free is correct. I have downloaded omnidisk sweeper to confirm this.
I have seen a few posts on here and around the web referring to this, but no real answers. I have also reviewed Pondini's info on this to no avail.
Does anyone have any ideas?!?!

Also,
I had installed a version of parallels with windows 7, but deleted it. Would parallels be causing my computer to index incorrectly? I I used appcleaner to delete all the parallels files so I do not have it anymore.

BUG: Info panel displays incorrect Hue values

Recently, I've been doing a lot of work with color in Fireworks and came across the following bug, which appears to be a longstanding issue within the application. Rather than keeping it to myself, I figured I'd post it here in addition to submitting a bug report with Adobe. So here it is...
Hue values displayed within the Info panel (in HSB mode) do not consistently match the values displayed in the Color Mixer panel—including basic colors such as pure Yellow, Cyan, and Magenta. The values are 1 degree off—most often below the Color Mixer value, but sometimes above (as with Magenta). This holds true whether using with the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
For example, the following inconsistencies were observed when sampling the centermost horizontal strip within CS6's default Color Cubes swatches picker. Note that over 50% of these colors are affected by the issue.
The Color Mixer seems to display the correct values, while the Info panel's values appear to be incorrect. Note that this issue affects the HSB mode only; the RGB and Hex values are consistent between both panels.
This bug has been observed in Fireworks CS6, Fireworks CS5.1 and Fireworks 8 on Mac OS 10.6.8 (Snow Leopard).
Here's the bug report submitted for this issue:
Product name: Fireworks
Product Version: 12.0.0.236
Product Language: English
Your operating system: Mac OS 10.6.8 (Intel-based)
******BUG******
Concise problem statement: The Info panel displays incorrect Hue values for many colors—including pure Yellow, Cyan, and Magenta. The Hue values are usually 1 degree below the value displayed in the Color Mixer panel (e.g., 59 instead of 60 for Yellow) but sometimes 1 degree above (e.g., 301 instead of 300 for Magenta). This is true whether using the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
Steps to reproduce bug:
In an open Fireworks document, open the Info, Color Mixer, and Swatches panels. Within the Color Mixer and Info panels, set the color mode to HSB.
Draw a Rectangle and set its fill to Yellow (#FFFF00) using the Color Picker.
Observe the Hue values displayed in the Color Mixer and Info panels.
Select the Eyedropper (I) tool, and sample the rectangle's fill color. Again, observe the Hue values displayed in both the Color Mixer and Info panels.
Results: In both steps 3 and 4, the Hue value for pure Yellow (#ffff00) appears as 60 degrees in the Color Mixer panel but 59 degrees in the Info panel.
Expected results: The Hue for pure Yellow (#ffff00) should appear as 60 degrees in both panels.
Note that this issue affects the Info panel's HSB mode only; the RGB and Hex values are consistent between panels. Also note that this bug affects over 50% of the "pure" hues within CS6's Color Cubes swatches palette. For more info, see the following forum post:
http://forums.adobe.com/thread/1083391
This bug has been observed in Fireworks CS6, CS5.1 and FW8 on Mac OS 10.6.8 (Snow Leopard).

I haven't done anything other than add my footage to the timeline. I have 2 layers (1 targa seq and 1 png seq). As I move my mouse from the Timeline to the Comp Panel, the color values flash for a split second and go away. If I press Opt+1 (2, 3, and 4) the Info Panel displays the color for that one pixel but the values go blank as soon as I move my mouse. This happens in the Comp Panel mostly. If I open a Footage or Layer Panel, sometimes the values show, sometimes not. Never had this issue in previous versions.

Skip counts in iTunes not registering

For the past month or so, iTunes does not register skipped songs on my iPhone or iPad when I sync. All are latest software versions. Skip counts register when I skip a song in iTunes and play counts register on all devices. This makes most of my smart playlists pointless. Any ideas? Thanks.

Which particular Windows OS are you using, Goderic? XP, Vista or 7?

Skip count ipod and itunes; rating podcasts

Does anyone know why itunes only registers a skiped song when it is done on itunes? If I skip a song on my ipod and synce it up to itunes later it does not register a skip count for that particular song.
In another unrealed question. How come i can not rate podcasts on the ipod? I would much rather have the ability to rate a podcast than look at all the detailed podcast info? Is there a fix for this?

Yes. I would start by redownloading these tracks if they cannot be played either in iTunes or on your iPod.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock

Itunes 11 is displayed incorrectly?

but why?
what can i do?
i use windows 8.
thank u

You will need to describe your issue or problem in a lot more detail before anyone will be able to offer suggestions? What do you mean by "displayed incorrectly"?

How can I get iTunes to display the tracks from a CD in their original (album) order?

To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham

New iTunes 11 - no longer gives count of podcasts

Hi
Since I updated to iTunes 11, I can no longer see the number of podcasts that I have. There's a number displayed next to podcasts in the top left drop-down menu, but that's the count of unplayed podcasts. I want to know how many there are in total.
Any help appreciated.

If anyone's interested, I've just found out the answer. Go to the 'view' menu, then select 'Show Status Bar' and a bar comes at the bottom (as in older versions of iTunes) and displays the total number of podcasts and the GB used.

How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...

(Running Business Objects Release 2 (Web-I), No other reporting modules)
How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...
In my reports, I count the number of tests of one of our products and another count on the number of failures. I then use a simple formula to give me the defect rate percentage (DR%)
The universe objects used in the calculation are:
Assembly Number (dimension)
Human Sn (dimension)
Test Code Description (dimension)
I created a variable (called [Count Assys]) that counts the number of Assemblies Tested:
Formula: =Count([Assembly Number];All)
Another variable (called [Failed Count]) counts the number of failed tests:
Formula: =Count([Test Code Description];All) Where ([Test Code Description] <> "FUNCTIONAL TESTS PASSED")
NOTE: There is a "not equal to sign" between [Test Code Description] and "FUNCTIONAL..." above, but the forum is blanking it when I preview the message. Not a big deal, but it may be important for someone looking to help...
I then have a third variable called [DR%] that divides [Failed Count] into the number of [Count Assys], which yields a number formatted as a percentage.
Formula: =[Failed Count]/[Count Assys]
The above works great!
The problem is: when I have a zero defect count (everything passes), the cell is blank, so the percentage variable remains blank. I want a zero (0) to appear if nothing failed so the percentage appears as 0%
I've searched this forum completely and have tried several Properties changes and different variable strings (like =If([Failed Count]<1,0) and the cell stays blank and cannot come up with an answer.
This one seems simple to me, but everything I've tried has yielded zero <smile> results.
Thanks,
Charles
Edited by: Charles Norman on Dec 9, 2008 12:44 PM
Edited by: Charles Norman on Dec 9, 2008 12:47 PM

Hi Charles,
Use [Dr%] Variable formula as =if(IsNull([Dr%]);0;[DR%])
Here IsNull returns the Boolean value of variable [Dr%] if its true then inserts 0 else the percentage values of failed tests based on the total number of assembly tests performed.
I Hope this is what you want to achieve....
Thanks....
Pratik

Need to display the first 5 values of a Multi value parameter in SSRS report

Hi All,
I have SSRS report with multi value parameter. I need to display the parameter selection values in a text box. I've more than 50 records in the multi value parameter list. I've included the code to display "All" if I choose "select
all" option otherwise it will show the selected values. But, I need to change the logic. I have to show only the 1st 5 records if I choose more than 5 records.
How can I implement this?
I have used the below code
=iif(
Parameters!Country.Count = Count(Fields!Country.Value,
"Country")
,"All"
,iif(Parameters!Country.Count>5
,"Display the 1st 5 values"
,Join(Parameters!Country.Value,",")
Regards,
Julie

Hi Julie,
Per my understanding that you want to always show the first values from the param country to a textbox when you have select more then five values from the dropdown list, if you checked "select all", textbox will display "All", if
you select <=5 amount of values. it will display the selected values, right?
I have tested on my local environment and that you can create an hide parameter(Param2) to display just the first five values from the Country and when you select more then five values from country you will get the Join(Parameters!Param2.Value,",")
to display.
Details information below for your reference:
Create an new DataSet2 which the Param2 will get the values from：
SELECT TOP (5) Country
FROM tablename
Create an new param2 and hide this parameter, Set the "Available values" and "Default values" by select the "Get the values from a query"(DataSet2)
You can also Specify first five value for the "Available values" and "Default values", thus you will not need to follow the step1 to create the dataset2
Modify the expression you have provided as below:
=iif(Parameters!Country.Count = Count(Fields!Country.Value, "DataSet1"),"All" ,iif(Parameters!Country.Count>5 ,Join(Parameters!Param2.Value,","),Join(Parameters!Country.Value,",")))
Preview like below
If you still have any problem, please feel free to ask.
Thanks,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

The song titles are displayed incorrectly, how do I fix this?

Ever since an update of itunes a couple of months ago, the titles have been displayed incorrectly in my library. I listen to a lot of Chinese, Korean, and Japanese music and after the update the information turned into squares. I went online and tried the much given solution of converting the id3 tags. This resulted in all my songs (even the english ones) turning to Chinese script when I reversed unicode, which was solved by reversing it again. However after trying all the id3 versions I am now left with a part of my songs being displayed as ?????? and with the other, largest part having the correct names but with the symbol Ƞ spread throughout the titles, which is annoying to say the least.
Other programmes on my computer display the different scripts just fine, and I have Japanese and Korean installed so as to be able to write it. The songs are also still displayed correctly if I acces them in their folders.
I am kind of losing hope after trying to find a solution on the internet for a while now, and have even re-installed itunes completely, to no avail.
If anyone has any suggestions or possible solutions, I'd be very grateful.

Hi Treenr3,
Sounds like you have been on the right track with regard to troubleshooting this issue. It may be worth going over the font troubleshooting in the following article, just to double check (it refers to a previous version of iTunes, but the troubleshooting steps should be similar).
iTunes 9: Font text is incoherent or appears in a different language
http://support.apple.com/kb/TS3042
It may also be worth trying some isolation troubleshooting in new test user account with just a couple of the tracks that are having issues to see if it persists.
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Cheers,
- Brenden

XI Adapter Illegal count value 0

Hi all,
When configuring the PI Adapter to connect for outbound messaging from MDM, we are receiving the following error:
Illegal Count Value 0
This error is in the Component Monitoring.
Looking in the logs, this seems to be occuring because of the error here:
Catching java.lang.Exception: Illegal count value 0.
at com.sap.mdm.xiadapter.util.MdmUtil.getPortProperties(MdmUtil.java:98)
at com.sap.mdm.xiadapter.AbstractMdmAdapter.start(AbstractMdmAdapter.java:214)
at com.sap.mdm.xiadapter.MdmSender.start(MdmSender.java:46)
at com.sap.mdm.xiadapter.jca.XIConfiguration.channelAdded(XIConfiguration.java:160)
at com.sap.aii.af.service.administration.impl.AdminManagerImpl.notifyChannelActivationStateChanged(AdminManagerImpl.java:796)
at com.sap.aii.af.service.administration.impl.cluster.ClusterManager.eventReceivedSync(ClusterManager.java:426)
at com.sap.aii.af.service.event.impl.worker.sync.SyncLocalWorker.work(SyncLocalWorker.java:52)
at com.sap.aii.af.service.event.impl.worker.sync.AbstractSyncWorker.startWork(AbstractSyncWorker.java:40)
at com.sap.aii.af.service.event.impl.EventManagerImpl.sendEventAndWaitForAnswer(EventManagerImpl.java:484)
Could anyone provide any advice on this? The error occurs even if the Port is deliberately configured incorrectly, but only occurs when the Remote System is correctly configured. Changing the user seemed to make no difference.
We are using 7.1 SP05
Thanks in advance,
David
Edited by: David Apthorpe on Jul 21, 2010 3:54 PM

Hi David,
The error "Configuration Error:illegel count 0" will be fixed MDM 7.1 SP05 Patch06 (bulid 7.1.05.87) which is planned to be released by beginning CW 32 2010.
This issue only occured for only Prior to created Communcation Channel SPO5.
If you create Communcation Channel After Upgarde SP05 ,The messages successfully processed t
o MDM server(Ready folder).
Regards,
Ramesh

Operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?

operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?
How to reproduce the issue：
1.Create a new PPT slide in Office2010.
2. Insert a certain text/characters, such as Mircosoft blablabla,
3. Insert an URL right after the text part , TextToDisplay is the “Test”，Address is the "Url".
4. The content in the ppt is ”Microsoft Test“，here "Test" is the hyperlink which we would like to convert. Please execute the code we list below.
5. The problem will be reproduced by the above steps.
PPT.Application ap = new PPT.Application();
PPT.Presentation pre = null;
pre = ap.Presentations.Open(mFileName, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (PPT.Slide mSlide in pre.Slides)
PPT.Hyperlinks links = mSlide.Hyperlinks;
for (int i = 1; i <= links.Count; i++)
PPT.Hyperlink mLink = links[i];
mLink.TextToDisplay = mLink.TextToDisplay.Replace(mLink.TextToDisplay,"url");
mLink.Address = mLink.Address.Replace(mLink.Address, "url");
Modify texttodisplay, the address vaule will be assigned as null. Anyone knows how to solve it?
Does it caused by a PPT API's Limitation?

I've tried the below code and it works, you can refer this article:
https://msdn.microsoft.com/en-us/library/office/ff745021.aspx
to find that the hyperlink needs to be associated with a text range, and thats what I did in the code below with the help of the link sent by Tony.
Microsoft.Office.Interop.PowerPoint.Application ap = new Application();
Microsoft.Office.Interop.PowerPoint.Presentation pre = null;
pre = ap.Presentations.Open(@"C:\Users\Fouad\Desktop\abcc.pptx", Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (Microsoft.Office.Interop.PowerPoint.Slide mSlide in pre.Slides)
Microsoft.Office.Interop.PowerPoint.Hyperlinks links = mSlide.Hyperlinks;
Microsoft.Office.Interop.PowerPoint.Shape textShape = mSlide.Shapes[1];
for (int i = 1; i <= links.Count; i++)
Microsoft.Office.Interop.PowerPoint.Hyperlink mLink = links[i];
Microsoft.Office.Interop.PowerPoint.TextRange range1 = textShape.TextFrame.TextRange;
TextRange oTxtRng = range1.Find(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay,After:range1.Start,WholeWords:Microsoft.Office.Core.MsoTriState.msoTrue);
oTxtRng.Replace(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay, "url");
oTxtRng.ActionSettings[Microsoft.Office.Interop.PowerPoint.PpMouseActivation.ppMouseClick].Hyperlink.Address = "http://www.microsoft.com";
Fouad Roumieh

Itunes 7 displays incorrect Skip Count values

Similar Messages

Maybe you are looking for