ITunes 7(Error Quick Time 7.1.3 is needed, you have 7.0.0d)

Uh... So I download Itunes/QuickTime. Install it, and boot my computer. It tells me I dont have the most up-todate QuickTime. I try and download QuickTime stand alone, but it only is a package with Itunes, and is still out of date. Any Help would be great.

I try and download QuickTime stand alone, but it only is a package with Itunes,
it is available as a standalone. there are two different versions of the installer on the download page. take a closer look at the area of the page immediately below the "Download the Free Player" heading (to the left of the page):
Quicktime 7.1.3 Installers … get the one that doesn’t mention itunes

Similar Messages

  • I just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help :)

    i just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help

    Just FYI
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5

  • HT5318 I am unable to down load itunes and/or Quick Time.  I am getting the message "not a valid 32bit win".  I am operating on a 64bit system.  I have tried all the fixes.  what now?

    I recently purchased the New IPad and am trying to sync to this computer.  I need to download iTunes and /or Quick Time.  Last night I tried downloading Quick Time and this morning it was still trying to load.  iTunes will not download, but gives me the error code " not a 32bid win program"   I am running a 64 bit system and have tried all the fixes that are listed.  Now what.  This is a Acer, Windows 7 64bid system. 

    iTunes will not download, but gives me the error code " not a 32bid win program"   I am running a 64 bit system and have tried all the fixes that are listed.
    Doublechecking. In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Itunes and apple quick time wont open

    Itunes and apple quick time wont open
    I reinstall and install and restart my pc and it is the same

    I have error 2378.
    I tried all the fixes (uninstal completely) I've tried installing Quicktime standalone, same error.
    One day my computer installed some windows updates. next time i tried i tunes, it said it couldnt' find RICHED20.dll.
    Tried removing the updates. then tried removing/reinstalling itunes. Everytime I try to run the install package I get "error with package 2378". I tried restoring my system to before the windows updates. No luck.
    HELP

  • Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

    Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Share Error Quick Time Failure -50. Anyone know what's going on?

    I'm trying to transcode a five minute project that's fairly involved - multiple audio and video channels, graphics etc. When I try to send it out of the Share option in Final Cut 7 to either Apple TV or Mobile Me or YouTube, I keep getting the same thing after about a half hour: "Share Error Quick Time Failure -50." Anybody know what's going on? I'm sending it to the movies folder. Thanks.

    I haven't gotten that to work for months, maybe 10 months or so. I gave up. I just export and do whatever I want with the file. I create a self-contained MOV file that I hang onto as a "master." I put that into either Squeeze or Compressor and make what I want from it.

  • Upgrading iTunes does affect Quick Time pro?

    From a newbie: I installed Logic Studio 8 and together came also Quick time PRO. If I'm upgrading iTunes, normally also Quick Time is upgraded. Do I risk to loose the pro edition and to come back to Quick Time Player only?
    Thank you!
    Paolo

    no it shouldn't

  • Some of your Quick time is out of date. You can fix this problem by updatin

    I am running Windows XP SP2 with V 7.1.3 of Quicktime. Every time I lauch QT, I get the error message:
    "Some of your Quick time is out of date. You can fix this problem by updating to the latest version."
    I have gone onto Apple's web site and got the very latest I can see of QT, and no matter what I keep getting this message. I have 400 PC's in a school district that every time they lauch QT it gets this error. There are 2 tabs "update now" or "cancel". If we select Update now, it doesn't update because we already have the latest. So we just have to do "cancel". Has anyone seen this? Please help.
    Regards,
    Mark Chiasson
    [email protected]

    I posted a similar problem. I removed everything and in addition I removed two Quick Time files in System32. I reinstalled everything and it worked. For details read my posted problem and the solution
    Pentium 4 Windows XP Pro

  • For me, a time capsule is even safe when you have whatter damage op fire in your house. Am I wrong or is it just an additional HD like there are so maney with the only advantage that it goes automatically via your wifi for apple devices?

    For me, a time capsule is even safe when you have whatter damage op fire in your house. Am I wrong or is it just an additional HD like there are so maney with the only advantage that it goes automatically via your wifi for apple devices?

    Jloe,
    As I have posted before, You, and others having issues with Verizon would be much better off if you complained to the FCC and FTC as well as your Senators and Congressmen.  We, as individuals, have such small voices - use them where they might do the most good.
    Also, don't assume that Verizon doesn't monitor these postings, they actively do & sometimes contact those that post complaints.
    Sorry for your problems.  GC

  • I continue to recieve the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe photoshop elements 13 software that I purchased.

    I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.

    cancel the akamai download and download files 1 of 2 and 2 of 2 directly.  put both in the same directory and double click the exe to start installation.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • TS1292 I have been gifted an american itunes gift card and am a Canadian resident. Do you have a solution to how I am able to redeem the card on itunes.ca?

    I have been gifted an american itunes gift card and am a Canadian resident. Do you have a solution to how I am able to redeem the card on itunes.ca?

    Send the card back to whoever gave you the card. They'll have to give it to someone in the US.
    Regards.

  • Computer shuts down when itunes store or quick time tries to open

    I recently downloaded the latest version of itunes and quick time. when I try to go to the itunes store, try to use quick time or if a music video tries to load onto the itunes library from videora ipod converter, the computer shuts down. It happens every time. can anyone help.

    iTunes will not download, but gives me the error code " not a 32bid win program"   I am running a 64 bit system and have tried all the fixes that are listed.
    Doublechecking. In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Itunes 10 and Quick Time Installation on Windows 7

    I have installed iTunes 10.6.3.25 on a Windws 7 Operating system and I had what appears to be the same problems of not being able to intall the software and I followed the trobleshooting guide on:
    http://support.apple.com/kb/HT1926
    I have now been able to install the software in the automatically selected folder of C:\Program Files(x86) however I am still expereincing the following problems:
    - I was unable to launch itunes however I launched it in Safe Mode and the following messages are received in order:
    "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly"
    The only option to select at this point is "OK" once selected iTunes then opens and then the the next message is received:
    "iTunes: iTunes.exe - Entry Point Not Found
    The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll"
    The only option to select at this point is "OK" once selected iTunes finishes opening.
    Further I note that following the initial installation of iTunes Quick Time Player did not automatically install so I downloaded from http://www.apple.com/quicktime/download/ QuickTime 7.7.2. Once downloaded I attempted to install the executable file (as administrator) and after the standard message of Windows 7 appears as follows:
    "Do you want to allow the following program to make changes to this computer?" (Program name QuickTime....etc)
    I select "Yes"
    Then a dialog box appears very breifly that normally comes up when installing new software, however before the dialog box populates with any information it dissapears and the installation process stops.
    So once iTunes has finshed opening I attempt to open one of the movies in my library and as expected the following message appears:
    "This movie requires Quick Time, which is not included in this version of iTunes.
    To play this movie, instal Quick Time."
    Assistance would be appreciated.

    I got it to work now ...
    -Unistall the current iTunes on your computer.
    - go to http://support.apple.com/kb/DL1427
    -Go all the way down the page and download the iTunes through the given link
    ----------Download for iTunes 10.4.1 for Windows  (64 - bit) here:  iTunes 10.4.1 for Windows 64-bit.
    -Once downloaded if a message window pops up with a message "the file itunes library.itl cannot be read"
    Just go to My documents-> Music folder -> iTunes folder -> delete library.itl if existing or add it if it doesn't exist.
    it worked for me so I believe that it should
    Good luck

  • How to Fix the following Encore Error: "Quick Time system error: number = -1"?

    Has anyone seen this error before in Encore? Quick Time system error: number = -1 How do you fix it? I get it while burning a DVD. I have the latest version of Encore and the menu I am using was exported from After Effects.
    Thanks so much,
    Heather

    When I start Encore I always receive a warning that I do not have Quicktime installed
    Since I do not use QT in any way, I ignore the warning and Encore works just fine
    I also do not use menus from AE, so there MAY be something to look at
    Does Encore work properly if you use one of the built-in menus?

  • Windows installer will not install ITunes 7 or Quick Time

    I previously ran iTunes 4 with an earlier model iPod. Recently upgraded to iPod for video which was not recognized by iTunes 4. Attempted to download updated iTunes software and continue to be unsuccessful. Here's what happens:
    I am able to download both iTunes 7 and QuickTime to my hard drive, but when invoke the respecive .exe files I get the same error message which reads, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."

    I have never heard of the respecive.exe file in regards to itunes or ipod. Are you sure you followed the troubleshooting steps word for word? I've had some people read the follow, "Empty your temp folder contents" to mean delete the temp folder. You have to be careful to follow them closely. I still sometimes have to reread some steps only to find out I didn't read it correctly the first time.
    With that said, how do you know its a windows installer problem? If you were installing itunes & QT using their standalone installers there won't be a file called respecive.exe for either. You should be launching itunessetup.exe to install itunes (which can possibly contain QT). I forget what the standalone QT installer is called but I know it isn't respecive.exe.
    Here are the steps I suggest to people who have trouble installing itunes. Please read them over first and ask a question if something isn't clear.
    1. Uninstall itunes and ipod software
    2. Reboot your PC
    3. Re-download the itunes installer and QT and save this installer to your desktop
    4. Go to C:\WINDOWS\Downloaded Installations. You should see folders like {06EB3288-C5F4-4C73-8EEE-AC798668FF66}
    5. Look in each of these folders for itunes.msi and delete the folder. Be careful to only delete the folders containing itunes,msi
    6. Clean out your temp folders, Delete as much as you can in these folders except for the folders Cookies, History, Temporary Internet Files.
    a. C:\windows\temp (if one exists)
    b. C:\Documents and Settings\{username}\Local Settings\Temp
    Sometimes installers will pick up old files or won’t delete their temporary files.
    7. Go to http://www.download.com/3000-2094-881470.html and download the regcleaner. Unpack it and run it. This is a nice utility that will delete broken registry entries and create a file with them. This way if it deletes anything needed you can add it back. Note I never had to do this with using it for many years. Also it doesn't list XP but you'll be fine. I run XP on both.
    8. Reboot your PC.
    9. Now try to go and install everything again. I'd do QT first then follow with itunes. Remember to disable virus/firewall/privacy/web accelerators before launching the install.

Maybe you are looking for

  • Unable to Close posting period

    Getting error in MMPV as below Mode: Check and close period Client:800 Period entered (month/year):052008 Incorrect period in control rec. of CoCd 1000; no conversion The current period (month/year) of the control record is052008 Period closing compl

  • Working on creation of PO using smartforms

    Dear experts, let me know at present in am working on ECC 6 version of SAP.when inserting the text under display order.And when checked in OUTPUT OPTIONS, i am unable to find the sub heading OUTPUT TABLE. which is actually present in the tutorial. Ho

  • HTML Email

    Hi, I'm having trouble creating an html email that works accross all email clients. Right now I'm testing on a Macbook and my email works fine in Entourage but won't appear at all in Apple mail. I know I have to set a multi part MIME header but I'm n

  • Problem in Tool bar Icon

    I m trying to attach an icon file with the forms toolbar. The icon is appearing on the toolbar button but partially. i.e complete image is not visible but the part of it.

  • Line Graph Behaviour

    I have a series of data 01-JAN-2008 10 01-FEB-2008 20 01-MAR-2008 30 01-DEC-08 30 and some data for 2009 01-JAN-2009 5 01-FEB-2009 10 01-MAR-2009 20 01-APR-2009 30 I am trying to produce a rolling 12 month Graph with the Month as the label and Year a