ITunes 7: "memory could not be read" error

I am running the latest version of iTunes 7 and sometimes get the following error message:
"Instruction at Ox5ad71331 referenced memory at 0x00000014. Memory could not be read"
This happens after iTunes crashes. The appearance of the crash is that the font will become very dark/bold and dark lines will appear around the cells of the library, then the program will crash.
Is this related to iTunes 7 or Multi-Plugin, which I use to make my media buttons on my laptop work with iTunes? I have no skinning options chosen.
Thanks.

I uninstalled the Multi-plugin and haven't had the problem since, in fact, no crashes at all.

Similar Messages

Memory could not be read Error Fixed

At least 6 months ago, I noticed that every time I opened my
default page in Dreamweaver and closed it, Dreamweaver would crash.
I would get the famous Application Error, "The instruction at
"0x5ad71531" referenced memory at "0x00000014". The memory could
not be "read". Click OK to terminate the program."
What I figured out is that right about that time, I had
switched my default browser for viewing to Firefox Mozilla.
Today, while I was testing some things out, I noticed that
the Check Browser Support list, only had Internet Explorer and
Netscape.
After I added Firefox Mozilla to the list of browser to check
compatibility for, the problem disappeared.
Go figure.

> At least 6 months ago, I noticed that every time I
opened my default page in
> Dreamweaver and closed it, Dreamweaver would crash. I
would get the famous
> Application Error, "The instruction at "0x5ad71531"
referenced memory at
> "0x00000014". The memory could not be "read". Click OK
to terminate the
> program."
>
> What I figured out is that right about that time, I had
switched my default
> browser for viewing to Firefox Mozilla.
>
> Today, while I was testing some things out, I noticed
that the Check Browser
> Support list, only had Internet Explorer and Netscape.
>
> After I added Firefox Mozilla to the list of browser to
check compatibility
> for, the problem disappeared.
Great detective work!
I can't seem to reproduce this problem. What version of DW do
you use?
Was Internet Explorer or Netscape defined as either Primary
or Secondary
browsers? Any other details to help me reproduce this so we
can fix it
if it's still in the code?
Thanks,
Randy

Reports 3.0 "Memory could not be read" error

If the object referenced by a trigger is deleted without also deleting the trigger itself the following error message appears when attempting to access or delete the trigger:
R30DES32.EXE - Application Error
The instruction at "0x649e401e" referenced memory at "0x00000402". The memory
could not be "read".
Click on OK to terminate the application
Click on CANCEL to debug the application
<<OK>> <<Cancel>>
Clicking either button terminates the session.
How can I get rid of a trigger in this situation when to highlight it and press the delete key only results in needing to restart Reports?
TIA,
Dan Wilterding
[email protected] (aging e-dress, soon to go away)
[email protected] (newer, faster, shinier e-dress with better mpg)

GX is disabled since installing. I don't know what or who installed manycam but i will disable it and come with updates. Thank you, kind sir.
Later edit: OK Uninstalled manycam just changed the error code, but the error is still there. I attached the picture.
Attachments:
DSC_2877.JPG ‏2879 KB

Skype 7.0 memory could not be read error on shutdo...

Hello, yestarday I upgraded to Skype 7.0.0.100 and when I shutdown the computer, restart or log off I get this error message: The instruction at 0x60afedfe referenced memory at 0x069b26a0. The memory could not be read.
I mention that I unchecked the option to "play a sound when I sign out" and I disabled uPnP (as mentioned in other threads).
This issue is the result of a conflict with the Asus Xonar DG SI 7.1 audio card, but unchecking the option to "play a sound when I sign out" fixed the problem in the previous version 6.
The error doesn't generate any kind of information in the event viewer.
My OS: Win 8.1 Pro
Any suggestions?
Attachments:
DSC_2877.JPG ‏2784 KB

GX is disabled since installing. I don't know what or who installed manycam but i will disable it and come with updates. Thank you, kind sir.
Later edit: OK Uninstalled manycam just changed the error code, but the error is still there. I attached the picture.
Attachments:
DSC_2877.JPG ‏2879 KB

Referenced memory could not be read - error

Hey, In an application on stop command, I exit from labivew on exit I get an error the referenced memory could not be read click ok to terminate program can any one suggest why this error is seen
how this can be resolved?
enclosed a screen shot of error
Regards
anil
Attachments:
error log.PNG ‏6 KB

Hi AndreasC,
This error message occurs when LabVIEW memory space goes corrupt and is often due a DLL or CIN code.
There can be two reasons for this:
1. Try removing all DLL calls in your code and see if it works. Most of the time, the corruption is traced to a call to a DLL function that has incorrectly passed inputs to the Call Library Function node, often by passing an uninitialized string or array, or by writing past the bounds of the string or array in the DLL function. Some DLL functions assume that a string buffer is presized to 256 bytes, 1 KB, or some other size. If a smaller sized string buffer is passed, the DLL can write past the buffer and corrupt the dataspace that follows.
2. This error can also be caused when running a LabVIEW built executable. If the VI calls a WinAPI DLL function and uses the full path to the DLL in the Call Library Function Node, the LabVIEW Application Builder will create a copy of the DLL in the data directory of the executable. Some DLLs such as WinAPI DLLs should only reside in one location, such as C:\WINDOWS\system32, otherwise errors/crashes can occur when called. To prevent this, remove the DLL path in the Call Library Function Node when calling WinAPI DLLs.
Some users have faced similar problems and the above solutions have worked for them.
Here are the links to those discussions:
http://forums.ni.com/ni/board/message?board.id=170&message.id=67230&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&thread.id=229434&view=by_date_ascending&page=1
Regards,
Ujjval

Memory could not be read error.

I keep getting the following error while using Form Designer 7:
The instruction at "0x022221b2" referenced memory at "0x0000001c". The memory could not be "read".
It happens, randomly, when doing a number of things:
inserting a static text area
moving a form field
resizing a static form field....
In other words, no one thing seems to be causing it. If anyone has any ideas on this one it would be most helpful. Right now it is a pain in the butt since I keep losing information everytime it crashes.

Can't help with why but.... If Designer crashes you can recover the last PDF that you previewed by going to C:\Documents and Settings\<username>\Local Settings\Temp and finding the most recent pdf with a name such as _12bs10afg3a40f3t7j.pdf. That should be the last version you Previewed. Rich Ruiz Novanis

Illustrator CS error : "The memory could not be "read""

Hi,
If i close the Adobe illustrator CS in my pc(Windows XP). "The instruction at "0*00341469" referenced memory at "0*00000000". The memory could not be
"read"", error displayed. If i click ok, then only the illustrator closed. Could you please advice me how to solve this error.
Regards,
Maria Prabudass E

Possibly a bad font.
check
The memory could not be...

Memory could not be read Distiller

I'm getting a memory could not be read error whenever i try to print to PDF.
The error shows when the distiller loader is at creating fonttables.
Tried opening Distiller directly but gives the same issue,
I'm not able to open the Distiller program cause it will go to the error while startup is loading (again the error comes up when it's creating fonttables)
Tried sofar:
     Reinstalling Adobe PDF and Distiller. (after full removal)
     Running in safe mode.
     Looking on google for the answer (countless hours of searching without a working solution)
     printing a file without any special fonts to no avail.
Please any help to resolve this issue would be much appreiciated.

Do you have a lot of extra fonts installed on your system? In the past there have been problems with huge numbers of fonts. Also, what version of Acrobat are you using and on what OS?

Itunes 7 Application error - the memory could not be "read"

Hi guys.
I just bought my first ipod and i upgrated itunes.
but now itune just doesn't work!!!
i getting this message:
the instruction at "0x1000257a" referenced memory at "0x00000000". The memory could not be "read".
I tried to uninstalled but it didn't help.
I so frustrated, what sould i do...

okay, the broken QT will be causing at least some of the itunes grief.
let's try this first.
head into your Add/Remove programs. uninstall your existing QuickTime.
if Add/Remove won't let you uninstall QuickTime, download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes. (switch off antivirus and antispyware applications prior to the install.)
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Receive an Application Error (The memory could not be "read") when opening

After I install Itunes the program works ok until I close it and try to reopen. When I do this I receive an Application Error that says:
The instruction at "0x6686f183" referenced memory at "0x0fccc094". The memory could not be "read".
Click OK to terminate the program
Click CANCEL to debug the program
Debugging does not work so the only solution is to uninstall Itunes and then reinstall. That again only works for one use of the program. As soon as I close it and re-open, I get the same error. Please HELP. I cannot waste any more time uninstalling and reinstalling.
Sony Windows XP

Try this: Turn off automatic Microsoft/Windows updates and reboot your computer. I saw this a couple of weeks ago on the forum.

Safari Application Error "The memory could not be read"

First of all I would like to say I LOVE Safari (for Windows). Because of it and iTunes I have recently purchased a mac. Now the problem.
For the past 2 weeks or so this has been happening. When I start up Safari I get an error message that says
Safari.exe - Application Error
The Instruction at "0x121f377b" referenced memory at "0x00000000". The memory could not be "read". Click OK to terminate the program.
Now here is where its funny....Safari works, just every time i open it wether it a new window or at startup...this comes up. Does anyone know anyway to fix this and any useful tips for Safari/internet connections/macs?

Actually, I spoke too soon as far as AVG Free anti-virus' link scanner. The next time I opened Pandora internet radio, I got the error again. Looks like it has something to do with adobe flash player for Safari. I removed flash player and i could not get the error. As soon as i re-install and run a website with flash, it gives me the error again until i restart my machine.

Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
== This happened ==
Every time Firefox opened
== today. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

The solution is easy.
Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

Using LabVIEW 6.0.1 in Win2K, I get the Application Error: The instruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read".

I have several VIs that use the same typedef. This "super" typedef consists of of a cluster containing 6 arrays. Each array has elements that are themselves typedefs. The array element typedefs consist of a cluster of strings, a string array, and yet another cluster typedef of instrument handles. The total number of unique typedefs is 13 (1 super, 1 as the array element in the 6 arrays, and 1 in each array element).
When I make any changes to any of these typedefs and I try to open a VI that uses the "super" typedef, LabVIEW stops loading subVIs and crashes with the Application Error: Application Error: The inst
ruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read". Also note that this VI contains several subVIs that use this "super" typedef for terminal inputs and outputs.
What is causing this problem? My only solution to this is to rename the "super" typedef, open the VI, ignoring the load of the "super" typedef, and once the VI opens (with a broken arrow) relinking the VI to the typdef after renaming the typedef back to the original name. This becomes quite painful when you have to do this for each and every VI that uses this typedef on every revision of the typedef.

You might want to first install the 6.0.2 patch before digging too far into this. You can download it from the ftp site:
ftp://ftp.ni.com/support/labview/windows/updates/6.0.2/
If the problem remains, then it is likely related to a few known issues with strict type defs. Unfortunately, there is not much that can be done about it at the present time. You might try having the *.ctl file open in the editor when you open the VIs to see if that helps.

Application Error: "The memory could not be 'read'."

I am programming an application in C#.
I am using an Acrobat Reader control on my form to display PDFs within my program.
I have tried a couple of different configurations with the form control. I have drag-and-dropped the control prior to runtime. I have also tried to add the control dynamically.
When I run the program, then activate the control and close the form, I get the following error.
"sw:name.exe - Application Error; The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be 'read'. Click on OK to terminate the program."
I have googled this error for hours now, and cannot find anything that truly explains this error and how to fix it.
Thank you for any help.

To who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.
It seems that, somehow, LabVIEW, and other programming tools, straggle with this version of Adobe (I assume that this is due to this bug) when closing the reference to Adobe created by the ActiveX container. So the solution would be closing "by hand" this reference, and telling Windows to free all the relation between the application (LabVIEW for us) and Adobe. The idea is that when we've done with the VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:
- process all the Windows messages currently in the message queue (.NET: System.Windows.Form.Application -> DoEvents
- run CoFreeUnusedLibraries in "ole32.dll"
I hope this information can help somebody, as I wasted too much time to figure this out (finding eventually the answer in a forum of Adobe!)
P.S. For those who program in C# as well, check this link; this was my source.

Cannot Change Data Source - Error The memory could not be "read"

We have some reports that were created under Crystal Reports version 10 using a Sybase 12.5 database as the datasource. We have since upgraded to Sybase 15 ASE and we are also attempting to upgrade these reports to Crystal Reports version 11.5. The reports will convert to version 11.5 but will not work because of the following error:
"Failed to load database information. Details: The database connector 'crdb_p2ssyb10.dll' could not be loaded"
From previous experience we know that Sybase 15 is only supported via ODBC with Crystal Report 11.5, so we tried to change the datasource to ODBC, but when we do that we get the following error:
The instruction at "0x0e864b11" referenced memory at "0x00000004". The memory could not be "read".
Do we have any options at this point besides competely re-creating the reports?

We are using CR 11.5 and trying to change the data source to ODBC. I can create a new report and use the same stored procedures as a datasource via ODBC with no issues. I only have an issue when trying to change the data source on these existing reports.

ITunes 7: "memory could not be read" error

Similar Messages

Maybe you are looking for