ITunes 7 Resource Consumption

Upgraded to iTunes 7 and it is hogging resources. This results in many symptoms that have been reported here already.
My system is unusable while running iTunes 7 after upgrading today from 6.05.
Very weird how one piece of software can mess up your life style.

One single Airport Express (I only own one) and I an just trying to play to the Airport Express.
I have tried selecting multiple speakers but it make no difference, it can't be ticked in the box, even though it is visible.
I have a lot of Mac experience by the way, so I have checked and tried all the usual and unusual things. Even tried turning the Firewall off but no joy.
Ian

Similar Messages

  • Error message "iTunes Helper Resources not available" and saving to wrong Drive

    I am trying to upgrade iTunes to 10.7 on my PC but I keep getting the error message "iTunes Helper Resources not available". Diagnostics take me a support page which talks about not being able to see the device in iTunes - but I can see the device without problems.
    I thought I would try reinstalling iTunes from the webpage and it downloaded to my PC fine but when I went to setup, it showed me it is saving to a DVD drive - not my Hard drive. It also won't let me change the location for the file. I have no idea how that's happened as I obviously don't use the DVD drive as a USB (although the PC see's it as one) and I've never chosen it as the location for iTunes in the 7-8 years that I've been using it.
    I then thought I'd try uninstalling it and reinstalling it (to the correct drive) but again, it comes up that the DVD drive is invalid and won't uninstall iTunes.
    So I'm stuck and haven't been able to find anything helpful on the support pages or in iTunes Help.
    Please someone help ...
    Thanks.

    Try the following user tip. (Probably, the section on clearing the installation database might be best given that you've currently got a drive on the problematic letter at the moment.)
    "Invalid drive X:\" install errors

  • Resource consumption details not shown for each row source operation

    Hi Friends,
    I have generated a tracefile for a query as shown below.
    set autotrace traceonly arraysize 100
    ALTER SESSION SET optimizer_mode = ALL_ROWS ;
    alter session set tracefile_identifier = 'trcwithtime_221010_03';
    alter session set events '10046 trace name context forever, level 12';
    spool on
    spool C:\Sree\trcwtime.log
    -- put your statement here
    SELECT e.*,d.dname
    FROM scott.emp e
        ,scott.dept d
    WHERE e.deptno = d.deptno;
    spool off;
    exitBelow is the trace file
    SELECT e.*,d.dname
    FROM scott.emp e
        ,scott.dept d
    WHERE e.deptno = d.deptno
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.00       0.00          0          0          0           0
    Execute      1      0.00       0.00          0          0          0           0
    Fetch        2      0.00       0.00          4          7          0          14
    total        4      0.00       0.00          4          7          0          14
    Misses in library cache during parse: 0
    Optimizer goal: ALL_ROWS
    Parsing user id: 173 
    Rows     Row Source Operation
         14  HASH JOIN 
          4   TABLE ACCESS FULL DEPT
         14   TABLE ACCESS FULL EMP
    Elapsed times include waiting on following events:
      Event waited on                             Times   Max. Wait  Total Waited
      ----------------------------------------   Waited  ----------  ------------
      SQL*Net message to client                       2        0.00          0.00
      db file sequential read                         4        0.00          0.00
      SQL*Net message from client                     2        0.41          0.77
    ********************************************************************************For each rowsource operation, resource consumption details (cr,pr,pw,time) are not shown in the TKPROF output.
    How can i get these details as well?
    DBVersion: 9.2.0.8
    Regards,
    Sreekanth Munagala

    Sreekanth Munagala wrote:
    For each rowsource operation, resource consumption details (cr,pr,pw,time) are not shown in the TKPROF output.
    How can i get these details as well?
    DBVersion: 9.2.0.8You can get those details by setting values for following parameters (at session level, preferably) before generating the 10046 trace.
    ALTER SESSION SET statistics_level = ALL ;
    ALTER SESSION SET timed_statistics = TRUE ;

  • Resource consumption in different bucket

    Hi all,
    we have some planned orders which are created by optimizer and they
    have start date and end date are in different bucket then the total
    resource consumption is showed in the bucket where start date of the
    order fall. that means actually there is no over consumption of
    resource and production is falling under next bucket as per end date.
    When we observe the same in capacity planning book its showing in some
    buckets as capacity over loaded and production is showing in next
    bucket. Logically it should not the case.
    Kindly suggest how to proceed in this senario
    Thanks in advance.
    Regards

    THX

  • Does hiding controls/indicators on the front panel significantly effect computer resource consumption?

    I remember reading something about transparent controls and indicators leading to overhead processing... does hiding controls/indicators have similar or ANY negative effects?

    There's a difference between "effecting resource consumption" and "affecting resource consumption" - I assume you mean "affect".
    There's a difference between a transparent control and a hidden control - Hidden means the VISIBLE property is set to FALSE, and certain optimizations can be done - it doesn't have to draw anything. If a control is set to transparent, it will still go through the motions of converting that integer to text (or whatever), and then draw nothing (the decision is made later, so more time is taken).
    A transparent control can still react to mouse clicks. A hidden one cannot.
    It shouldn't affect any memory consumption, except for a video frame buffer.
    It's not clear from the question whether you mean the ACT of hiding t
    hem (the turning OFF of the visible property), or the fact that they may be hidden.
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • Resource Consumption between WLP 8.1 and 10.3

    Hi there,
    Is there any document about comparison in term of performance and resource consumption between the same portal application running on version 8 or 10?
    Thanks.

    No.
    In all probability the bottleneck will be your application, not the portal framework, so any test would need to be done for your application.
    Weblogic Server is definitely faster and JDK1.5 is way faster than 1.4 so you would see improvements.
    regards
    deepak

  • Production Quantity with Resource Consumption - 9ASPROD

    Hi ,
    Could anyone please tell me how keyfigure 9ASPROD - production(total) which is assigned to keyfigure function 6003 (Production Quantity with Resource Consumption ) is calculated . 
    We can view this keyfigure in Capcaity check Data view of planning book 9ASNP94.
    Thanks in Advance.
    Regards,
    Srini

    Hello Srini,
    It calculates in this way: operation end date on production resource +
    GR processing time.
    The best regards,
    Michel Bohn

  • Fixed PPM/PDS resource consumption and fixed PPM/PDS material consumption

    hi experts
    while going through help.sap to find out the meaning of linear optimization i came across two phrases  ""fixed PPM/PDS resource consumption and fixed PPM/PDS material consumption""   i have worked on SCC03 PPM and curto_simu PDS   but i couldn't make out what these phrases means . my perception is that every shop floor  operator is given a target to produce certain number of quantities  per shift on a production line .Does these phrase means that ??  or it has some other connotation. ?? 
    experts can you please provide clarity on those phrases.what does it actually mean ?

    sahu it is even more confusing see  "Fixed PPM consumption is the fixed time required independent of quantity produced."" 
       fixed time of what ??   is it the resource timing or shift timing
    Time required to produced material consumption quantity = Fixed cons + variable cons
    can i say it is the time required to produce a given  lot size quantity ??
    sahu would  you please put it in very layman terms.

  • ITunes No Longer Runs--iTunes Helper Resources Not a Valid File Name

    I made a dumb mistake (I think) and tried to install iTunes onto an SD card.  At first, my computer would only let me open iTunes if the SD card was installed.  I tried to reinstall to the C drive, but keep getting the "I Tunes Helper Resources not a Valid File Name" message.  At this point I want to uninstall everything and start over, but I'm afraid I'll lose my music.  I still have all the files but, of course, none will open since I don't have a properly installed iTunes anymore.   Would appreciate any assistance in uninstalling, reinstalling and saving my current music files.

    Here's what I decided to do.  Fortunately, all the files were still available, so I simply backed them up from my iTunes Music Library onto a 32 GB flash drive then transferred the new stuff onto an older computer in my office with an older version of iTunes.  I had to do this in several shifts since I have more than 32GB of music.  Everything that transferred plays well.  Next I'll try to wipe iTunes completely off the new computer, reinstall an older version of iTunes and then reload all the files onto the new computer.  What a PITA!

  • Resource Consumption

    Hi,
    We are using CTM to create PP/Ds order using PP/DS PPM, we have used Multimixed resource in the PPM definition.
    The number of capacities defined is 3 and available time is 24 Hrs, so total available capacity for a day is 72 Hrs.
    Now when we are planning for demand of 72 KG with throughput as 1Kg per Hr, the system should schedule the order at the start of the day and complete the order in one day assuming that 100% resource capacity is available.
    But when we take the CTM run it is creating a Planned Order which occupies the capacity of one resource for 3 days, i.e. it occupies only 1/3rd capacity and remaining 2/3rd capacity is idle.
    The expected result for me is that the system should consider the total available capacity irrespective of the no of capacities defined for the resource and create one planned order even if it occupies multiple capacities for the same resource
    Can anyone please suggest how I can consider single capacity for multiple resource of same type using CTM and PP/DS PPM.
    Thanks & Regards,
    Sanjog

    Sanjog,
    I have never done this in CTM, but in PP/DS you achieve this with splitting the orders across resources (work centers).
    In ECC, in the routing, in the detail of the operation, set the 'required splitting' flag, and then set the number of splits at three (CA02).
    Re-cif across (in order to eliminate confusion, it is probably best to delete the old PPM in APO first).  Now, in your PPM, you will see in the PPM operation Mode, the Fixed continual consumption is '3' and the variable duration has been reduced to one/third of the original value.
    Rgds,
    DB49

  • Help! - itunes - itunesminiplayer .resources error message

    please help me!
    I've been using itunes or a few years now and have never had any issues. All of a sudden I have started to get this error message when trying to load the program:
    "Itunesminiplayer .resourse is not a valid shortcut"
    Click OK:
    "Installation terminated."
    it looks like it is trying to install it from new but it has never been removed from my pc. All of this seems to have happened since I have downloaded the newest versions of ituntes.
    I cannot repair/uninstall it either - I get the same message. I have tried to download it directly from apple.com and that doesn't work either. No files have been moved by me.
    I don't know what to do next! Please help!
    Any suggestions??

    No need to apologise, hbos.
    With the "not a valid short file name" messages, we should try the following technique first.
    Download and install the Windows Installer CleanUp utility from Microsoft:
    [Description of the Windows Installer CleanUp Utility|http://support.microsoft.com/kb/290301]
    Now run the utility ("Start > All programs > Windows Install CleanUp"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove". Quit out of CleanUp.
    Next, we'll remove any leftover iTunes program files on the PC.
    Go "Start > Computer". Open your C Drive (or whatever drive you have your program files installed on). Open "Program files". Right-click on the iTunes folder and select "Delete". Empty your Recycle Bin.
    Now restart the PC and try another iTunes install. Does it go through properly this time?

  • ITunes too resource intensive

    If anyone wants to try this simple test, please post your results so I can see if I'm the only one experiencing it-
    First open Windows Task Manager by pressing CTRL-ALT-DEL.
    If iTunes isn't running, open it now.
    Place the mouse cursor on the iTunes volume control, and hold the left mouse button down.
    On my system (P4 2.4 Ghz,768 MB RAM), the CPU usage for iTunes.exe jumps up to 98% or 99%. Also, the Memory Usage for iTunes is around 47 MB.
    I think this is a bit much for an MP3 player. BTW, I'm using iTunes 6.
    Thanks for any replies!!
    -Bill

    Edit: I just noticed that this only happens when iTunes is in "Mini Player" mode (CTRL+M)
    -Bill

  • Experience about resource consumption about migration SQL- server to MaxDB

    Hi,
    Has somebody experience about migration MS SQL server (running under MS Windows) to MaxDB (Linux). Right now DB size is 2TB and SAP system is used about 1000 SAP users. I need information how cpu- and memory- consumption will change. Otherwise which requirements have to make for target database especially SAPS and hardware design. 
    Mit freundlichen Grüssen
    Andreas Sartor

    Check
    https://www.sdn.sap.com/irj/sdn/maxdb
    --> "Ensuring a Successful Database Migration to SAP MaxDB"
    I would book that service.
    The people doing that have lots of experience in diagnosing possible problems before the migration and will give you a lot of useful tips.
    Markus

  • Resource consumption for increasing column size

    Hello,
    DB: 11.2.0.1.0
    We need to increase the size of a column in the huge table (~ 400 Gb) from NUMBER(9) to NUMBER(18). Could you tell me what's the internals of the command
    alter table foo modify (bar NUMBER (18))Will it change the dictionary only, or it must scan the table block by block to make changes?
    Thank you in advance,
    Constantine

    rp0428 wrote:
    >
    Thats where i was pointing... existing column values from existing row(s) are checked .. isnt it ...
    >
    No - that is wrong for OPs use case.
    A change from NUMBER(9) to NUMBER(18) is a dictionary-only change.
    Existing data DOES NOT need to be checked at all since it is impossible for existing data to conform to NUMBER(9) but not conform to NUMBER(18).Thank you very much rp0428. You're right. Karan just tried to turn my attention to all possible details of problem although I've stated at the begin of discussion that I need to increase the precision.

  • Resource consumption in zones

    Let's say I have a beefy x86 box with 4 CPUs and 32Gb of RAM. Let's also say that I set up 30-50 zones on this machine, each one running a different web application (or sets of web applications), or just doing generic web serving.
    What are the constraints around TCP/IP load in this scenario (e.g where is the first limit I'll hit)? Will there be significant performance degradation as the zones start consuming huge numbers of TCP connections each?
    What about total number of processes? Am I limited to the process limit of the global zone?
    Thanks,
    -chris

    Zones themselves will not add any additional constraints in this
    situation. Think of them as a partitioning mechanism - if you had
    run the same workloads in just the global zone, there would be
    some characterization of the TCP/IP load on the system. Placing
    those workloads into individual zones will not increase the load
    on the system - rather, you've split the existing workload into
    separate pieces, so to speak.

Maybe you are looking for