Itunes 7 saga and getting back to 6.0.5 (uninstalling version 7)

Hi, so I've got my ipod functioning again having reset a million times, but daren't plug it into my mac running itunes v7 for fear it will screw it up again!!! Anyone have any ideas how to get back to v6.0.5 in Tiger? I'll have to do that so I can plug my ipod in and load some songs onto it!! Thanks.

I've restored my ipod using iTunes 7 on a PC and it appears to be working.... I'm slowly and carefully loading up the ipod with music wondering if at some point I'll hit a damaged disk sector which might have caused the problem?!?!

Similar Messages

How can I get rid of Itunes 11 - such a bad version !!- and get back to the previous version?

How come the new itunes 11 is so bad? I need to force quit every 10 mn as it buggs all the time for no reasons (for ex. when I search a song beginning by "a"): Moreover, the search engine is not reliable at all, the Genius application is dead, the tracks disappear, the duplicate function is acting silly etc
So please any tip to get rid of this technological accident and get back the previous version?
Thanks.

This article will walk you through it
http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/

I no longer have the PC that had my CD library and purchased music on iTunes. I am now on another PC and managed to download my purchased iTunes music etc. Is there a way on iTunes that I can get back my old CD music library without ripping again ?

I no longer have the PC that had my CD library and purchased music on iTunes. I am now on another PC and managed to download my purchased iTunes music etc. Is there a way on iTunes that I can get back my old CD music library without ripping again ? Earlier back up is corrupted. Thank you in advance. No longer have my old iPod but getting new one.

If you had the hard drive from the original machine, a backup of the same, an iPod with the media, or a subscription to iTunes Match then there would have been hope, but alas no.
For the future see Backup your iTunes for Windows library with SyncToy.
tt2

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

How do I uninstall iTunes 12.0 and revert back to version 11.4, version 12.0 takes away the control of lists etc and I want it back

how do I uninstall iTunes 12.0 and revert back to version 11.4, version 12.0 takes away the control of lists etc and I want it back

Hi,
Can you please expand on your issue? As far as I can see all the previous functions of 11 are in 12 albeit shown differently. Using get info to edit date is still possible, again it looks and feels different.
JIm

[Mac mini] Display getting dark and get back to normal, If there is an idle mode, where can I adjust it or turn if off?

MAC MINI (Mid 2011)
OSX Yosemite 10.10.2 / OSX Mavericks 10.9.5
While I were using mac mini for a while, the external display (LG_22MP55) has been getting dark and getting back to normal.
Did it enter into idle mode?
Anywhere I can find, can't find the related options to turn it off or adjust it.
Even adjusting "Never" for both "computer sleep" and "display sleep" can happen this annoying situation.
Beside, I have tried to connect iphone5S to external display (LG_22MP55) and double check LD will not enter into idle mode itself.
So, I guess this situation was happened by MAC mini.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

Is there anyway I can get rid of Lion and get back to Snow Leopard?

Is there anyway I can get rid of Lion and get back to Snow Leopard?

Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
Disconnect other drives except the sole backup drive.
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire boot disk of ALL DATA.
(warning, everything will be gone and not recovered, OS, programs, files, Windows etc all gone.)
Note: You might want to hold c and boot off the 10.6 installer disk and use Disk Utility to format the new blank external drive instead of using OS X Lion if that's hosed. Then reboot into Lion and copy files, may be safer that way.
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP there, don't install OS X yet.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same drive name as before, and click Erase...
(note: if you want to "scrub" the drive of old files that haven't been overwritten yet, then use the Security Option > Zero Erase, takes a lot longer)
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly recommended.
A lot of people use a Carbon Copy Clone of their boot drive to a new HFS+Journaled external drive (used only for this purpose) as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

Since recent updates, I have noticed that my apps close automatically when I am distracted. In some cases it is time consuming to sign back in and get back to the task I was doing. Is it possible to change a setting so the apps will stay open?

Since recent updates of iOS, I have noticed when using my iPad that my apps close automatically when I have to leave the room or am otherwise distracted for a few minutes. It is sometimes time consuming to sign back in and get back to the task where i left off. Is there a setting I can change so it will keep the apps open until I am ready to close them? Thanks for your help.

Did you have this problem before Restoring you iPad?
If you did then did you restore with a backup. You may have reinstalled something that is conflicting in this back up
If not then sounds like either something went array with the clean install or a hardware issue.
I know it's long winded but have you tired a clean install then downloading the apps again?
PJRS

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

Rebuild your iPhoto Library:
iPhoto 6 and later: Rebuilding the iPhoto library

How can I purchase an iTunes card online and get the code online to purchase apps.

How can I purchase an iTunes card online and get the code online to purchase apps.

iTunes Gift Options
http://support.apple.com/kb/HT2736

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?

I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Firefox 5 has lost all my chrome tab's and capabilities which came with 4? how do I un install 5 and get back to my version 4?

firefox 5 has lost all my chrome tab's and capabilities which came with FF4? how do I un install 5 and get back to my version 4 & retain all my bookmarks at least I's also like to retrieve my Chrome capabilities as well?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Is it possible to edit a DNG file in Photoshop and get back to Lightroom?

Hi,
The question title probably doesn't explain much what I'm looking for...
I shot in RAW and then converted to DNG, I like DNG and I can't understand what so many people have against it, anyway that's not the point...
I know have the DNG as my digital negative instead of the original RAW file and I start to do some editing in Lightroom. But then I realized that Lightroom is not enough for something I want to do. For instance, just today I had this picture I needed to remove some people and I had to use heal/clone but as you know, Lightroom's clone and heal features are not as flexible as Photoshop ones.
So now I needed to go into Photoshop, fix the photo and get back to Lightroom and continue my editing. However, I couldn't find a way to do it how I wanted to do... What I did was open the original (unedited) DNG in Photoshop, Adobe Camera Raw pops up and I ignore it, remove the people from the photo and save as TIFF. Then, back in Lightroom I open the new edited TIFF and copy Lightroom's settings from one photo (the DNG) to the other (the edited TIFF).
This workflow sucks and I know there are some options in Lightroom to automate it, but still, I don't think it would solve my problem. At least I couldn't find a way to do it...
What I wanted to do instead was to indeed remove that people from the photo with Photoshop but keep those changes in DNG. But take a note here that those changes could very much be destructive, I'm not talking about ACR or Lightroom's non-destructive editing, the removed people would be gone forever unless I draw some new ones. I really wanted to edit and save some changes on the DNG in Photoshop and keep editing the DNG in Lightroom without using a TIFF in between, do everything in the DNG.
Is this possible or not at all?

Ricardo.Amaral wrote:
What I wanted to do instead was to indeed remove that people from the photo with Photoshop but keep those changes in DNG.
sorry, no can do...ain't gonna happen.
What you've done is hit the wall on is the basic difference between lite duty spot healing and photo level tone and color correction (Lightroom and Camera Raw) and heavy duty pixel retouching in Photoshop.
When you need to substantially manipulate the "pixels" you need Photoshop and you'll be forced to render the raw file into a TIFF or PSD file either through Camera Raw or more better, via Lightroom.
You can do the basic tone and color correction directly in Lightroom and edit in Photoshop from Lightroom. But you will NEED to create and save out a "rendered" image that is no longer raw...then retouch to your heart's desire, save it and it'll be available in Lightroom along side your original raw if you choose.
But no, there's no way to open a raw in Photoshop, manipulate the heck out of it with massive retouching then save that back out as a raw file...ain't gonna happen.

Itunes 7 saga and getting back to 6.0.5 (uninstalling version 7)

Similar Messages

Maybe you are looking for