ITunes 7 Skipping Issue Fixed - Cross Fade Playback

Per the prior post by chiefhabeb, if your DMA settings are correct and your still experiencing skipping, do what mponzi suggested, completely disable the "Cross Fade Playback" feature in iTunes. (iTunes/Edit/Preferences/Playback) After updating my audio driver, making sure my DMA settings were correct, turning off iTune's "Sound Enhancer" feature and updating DirectX, I still had minimal but unacceptable skipping which was driving me crazy. Finally per mponzi's suggestion, disabling the "Cross Fade Playback" feature is what worked for me! SKIP FREE MUSIC THIS MORNING....FINALLY!!!!!!! Hope it works for everyone having the same annoying issue!

Per my earlier post - this really fixed the stuttering/skipping problem for me. Not one song has skipped all morning since disabling the cross fade playback. (Now if my videos would only playback like they used to.....have made several adjustments per troubleshooting iTunes Video playback and they are still stuttering and out of sync. Burned up enough time on iTunes issues. Will save the video playback problem for another day.

Similar Messages

Can you install a cross fade playback on your ipod?

I would like to play my songs in a cross fade playback mode om my ipod?
Is that possible?
If not, wouldn't it be a nice feature to have in the future.
THX

No it's an iTunes only feature.
Send your suggestion to Apple.
iPod Feedback.

Cross fade playback on the new ipod touch?

Anyone know if the ipod 4g has cross fade playback?

Hello Lagoonerdude,
According to several users and after a search through the new *User Guide, no it does not.
B-rock

Why is iTunes skipping through songs during computer playback?

Over the past couple months, after adding new files to iTunes, when I'm listening to them on my computer, it will sometimes arbitrarily skip the next song. Each song skips at a different place, but it's always the same places every time I replay the tracks. When I listen to them in Windows Media Player, they play all the way through. I know it's not an issue of file corruption. What can I do about this?

Hi LD,
Take a look at the article below and try playing the tracks in Safe Mode. If you no longer hear the playback issue, you may be able to resolve the issue by removing outdated 3rd-party plug-ins as suggested below.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
There are several ways an add-on can cause iTunes to act erratically, such as those listed below:
Loss of iTunes functionality, such as the Visualizer
Distortion or irregularity in the iTunes interface
Slow performance
iTunes won't open or quits unexpectedly
You see this alert while syncing: "... cannot be synced. A duplicate file name was specified."
If you see the above symptoms or other unusual behavior, you can disable any third-party plug-ins by opening iTunes in Safe Mode:
OS X: Hold down Option-Command.
Windows: Hold down Shift-Control while opening iTunes.
You should see this message before iTunes starts up: "iTunes is running in Safe Mode. Visual plug-ins you have installed have been temporarily disabled."Note: This is different than Safe Boot or Safe Mode for Mac OS X. You may need to test both at the same time to isolate all third-party interference.Click Continue and see if any issues persist. If your issues are resolved with iTunes running in Safe Mode, check the following:
Consult the vendor of any plug-ins you installed to see if they're compatible with your version of iTunes and check for any updates that may be available.
Close iTunes and move third-party add-ons to the Desktop to troubleshoot the behavior. iTunes stores these plug-ins and scripts in these locations:
Mac: /Users/username/Library/iTunes/iTunes Plug-ins/
/Library/iTunes/iTunes Plug-ins/
Learn more about troubleshooting unexpected quits, freezes, or launch issues:
iTunes 10 for Mac may quit unexpectedly on launch
-Jason

Re: Cross-fade playback not working

- 0.9.7.16.g4b197456
- No local files (Just streaming Pink Floyd's The Wall)
- Yes
- Pink Floyd – Empty Spaces - 2011 - Remaster and Pink Floyd – Young Lust - 2011 - Remaster

-- Version of Spotify you're using
Version 0.9.8.150.g59287e0c
-- Whether the tracks are local files
No
-- If you are having issues with gapless or crossfade, and your settings for both
Both,
Gapless playback ticked in
Crossfade tracks ticked in and set at 6 seconds
-- The Spotify URIs of two tracks you've experienced this with (to find the URIs, right-click the tracks)
All tracks for me but for the sake of report I just listened to September – La La La (Never Give It Up) - Radio Version and went to Maddie Wilson – Just a Boy and no crossfade or gapless playback.
The reported workaround does not work for me.
A "workaround" that works for me is disabling and re-enabling Gapless playback & Crossfade tracks maybe 10 times, note that Gapless playback & Crossfade tracks will stop working again after restarting Spotify (it's possible it might stop working after a while without a restart too, haven't really checked that)
As you might have noticed I'm using 0.9.8 however something that is worth noting is that I did not recieve this update through Spotify, I got it from another person (files signed by Spotify so I trust it) and I extracted the contents to \%appdata%\Roaming\Spotify\
Another thing worth noting is that the reason I did the "forced update" was because of this issue, so I had this same issue in 0.9.7 too, tried a clean re-install but that changed nothing.
(I also noticed that I can't change the settings in 0.9.8, they simply don't stick.. I don't know why, but that prohibits me from trying different configurations. I was going to try if "Enable hardware acceleration" affected the crossfade issue but now I can't, anyone that knows which file the "Enable hardware acceleration" option is stored in? Can't find it in perfs file)
This issue is extremely annoying for someone like me (read: someone who is easily annoyed by things that don't work and I can't seem to fix myself (read: I want to take a knife and stab my ears everytime a track changes...)) Is it possible to revert to like 0.9.6 or something like that without having Spotify auto-updating? I can't find any options for auto-updating?
Edit: Found a download for 0.9.6.81 will try that and report back the results.
Edit 2: Installed Spotify 0.9.6.81 and set up my preferences, deleted the update files that spotify made (also blocked spotify.exe and spotifyhelper.exe from creating those files again through my security suit) and the results are: Gapless playback & Crossfade tracks is working, even after restart, will monitor this thread to see when Spotify fixes this so that I know when I can update again.

Cross Fade Playback

I dont seem to be able to get this to work on my Nano. I have the correct software. When I click the check box on the Itunes software, it simply does not fade the songs in and out. Any ideas? Does the Nano support this feature?
Many thanks.
Toshiba A30-210 Windows XP

If you'd like to send feedback to Apple to ask that they include crossfaded playback as a feature in future revisions of the iPod firmware, you can do so on this feedback page.

Shuffle with cross-fade on 3rd Gen Shuffle - does anyone know?

Hi everyone!
One of the features I use at home with iTunes a lot is the cross-fade playback option. I noticed that the new Nano offers this capability, too.
Does anyone know if it's an option on the new shuffle, or if it cross-fades between tracks by default?
Thanks!

Well, I've found out the answer to my own question!
In case anyone was wondering: no, it doesn't do crossfades between tracks, but it does support gapless playback, so if that's how your tracks are set up, you will get a very continuous sounding playback between tracks anyway.
There we have it!

Gapless playback or cross fade: Hobson's choice!

My mini dies, so I got a nano... find so far, until I discover iTunes calculating gapless playback information.
What's it going to take Apple to fix this? How hard is it to offer one or the other?
I should not have to choose between cross fade or gapless, I should be able to choose neither!
If I have cross fade, the audio books with no silences at the beginning and end of each file have the words faded together.
If I have gapless, the stupid software picks the wrong silence and I end up jumping over audio. If there is too long a silence in a pause in an mp3, it seems to be marked as the end of the track and I am jumped to the next one.
Come on Apple! If you don't fix this, I'll have to give GtkPod a try.
Jim
mutt Windows XP Pro ...and Linux! Centos, Fedora, RH, you name it.

Opinions of users do affect my decisions, but I really am very careful about how I make those decisions. I may sound like a mad reactionary twit and I probably was until I found GtkPod, but that's not all I am.
I'm really close to getting a Mac in my life now that their Mach/BSD hybrid is the base instead of Finder and the toolbox ROM. Linux is mostly taking care of the heavy lifting for me, but I need a consumer OS sometimes. I just can't run Vista, so that leaves MacOS X for a consumer OS for me, and it's not a bad choice.
Where did you find a link to http://www.apple.com/feedback/itunesapp.html? I spent a long time trying to find some way to communicate with them and that's a reason for my low opinion at the moment. I'll be chargrined if I just missed it.
You really have properly chastised me, and I deserved quite a bit of it, but... I do have to take issue with your last point.
The idea that an audiobook can't be an MP3 because an MP3 files are music is not true. I guess iTunes/iPod sees it that way, but that is changing. They have added "remember my position" to MP3 files and made it easy to set on a multi-selection, too.
I think you will find MP3 audio books are very common everywhere but at Audible. Isis Publishing from the UK (Pratchett) and Blackstone Audio Books (Heinlein, Bujold) both use MP3 for there audio books. 32K or 64K Bps and mono or stereo make for very small audio books that play anywhere.
DRM is broken by design, so I've just avoided Audible and iTunes and looked elsewhere. The iPods are the best audio players out there, though, so I am happy to use them. Until they get all gapless on me
Thanks for the link.
Jim

ITunes 11.1.3 issues - freezing during audio playback.

Like many other folks on here, I'm having some playback issues with iTunes 11.1.3.
Macbook (couple years old) 2.4 mhz 2 core- 4 gigs ram
We use this computer primarily for music playback for dance classes and performances. Have run dozens of shows over the last year or so with zero issues.
There *might* be a better playback software option, but iTunes doesn't get in the way with too many options, has (up until now) been rock solid, and has never let us down, and is less prone to user error causing huge WHOOPS during something important.
That is, until 11.1.3. Didn't really notice any issues at first, but wife came home from a dress rehearsal Wednesday evening and complained - "it froze a couple of times while playing back Act 1. What's wrong with my computer?". (Act 1 - approx 50 minutes of music - 40ish total cuts).
I looked at it - she had a ton of other stuff running - mail - wifi - DVDPlayer - iPhoto - you name it. I figured that was the problem, shut all the other stuff off, and figured it was solved.
Nope - I'm running audio during our final tech rehearsal this evening before performances start in the morning.
35 or 40 minutes in - froze again during a track.
It just stopped - buttons became unresponsive - beachball came up - we waited a minute - and then it freaked out while trying to catch up with anything I had pressed, skipped around a bit, then resumed acting normal again.
Took a short break - checked nothing else was running that didn't need to be and made some adjustments:
Wifi off
Cloud off
Check downloads, sync, podcasts ... all off.
Reset all warnings. Reset cache ( which took a surprising amount of time)
Match and Genius, off
Opened Acitvity Monitor and stopped any processes that were not essential
Reboot ....
Another 30 or 40 minutes later - froze again.
Luckily, the lighting guy had a PC laptop with him. I quickly authorized his computer, transferred everything, and the rest of the evening went without a glitch.
Not sure what to do next. I'm pretty sure it's NOT the computer.
Disk checks OK. All hardware test are OK.
Couple of observations:
1. If I repair permissions - it finds a TON of messed up (?) iTunes permissions and fixes them. One day later, it find just as many again. What's up with that?
2. If I watch disk access in the Actiity monitor during playback - on occassion there's a WRITE spike. Odd. What's it writing? This is with NOTHING ELSE running but iTunes, which didn't glitch during the spike, but still, what's that? A contributing factor? A clue?
3. CPU and memory use looked OK. Haven't managed to get it to glitch again while I'm actually watching this though.
Between what I've tried, and what I've read here, I'm pretty convinced our Macbook isn't at fault here. I'm pretty sure there's a problem with 11.1.3
If anybody has other observations or suggestions, I'l love to hear them.

Are these recent releases?
I had troubles right after iTunes 10 came out because Digital copies were misreading "10" as "1" since the version check script was only looking for a single digit version number. Newer releases shouldn't have this, but if it's more than two years old, it might do this.

Canvas display issue with stills and cross fades

When viewing a collection of JPEG stills with cross fades, the images appear like they are "settling in" the canvas window (almost as if they expand a bit and then 'retreat back' to the space the window has). When removing the transitions I don't have the issue. Issue also appears when do more complex builds. No difference whether stills are exact 720x480 or much bigger. I rendered a portion of my sequence out to QuickTime and via Compressor and it shows normal - so my only issue is that my preview before render is not reliable (for the stills portion). Also tried to swith off external video options etc. and changing size of canvas window with no result. Suggestions? (using FCP 5.0.4 and latest QuickTime)

I rendered a portion of my
sequence out to QuickTime and via Compressor and it
shows normal - so my only issue is that my preview
before render is not reliable
The preview of unrendered material is never reliable and isn't meant to be. It just gives you a basic idea what's there. Render the transitions and you should see them as they are meant to be seen.

Random audio cross fade (dissolve) rendering issue - bug?

Hi, there -
I'm having the same issue as this guy, who it looks like never received a reply:
http://discussions.apple.com/thread.jspa?messageID=6536079&#6536079
To quote:
"I've got a sequence with 18 moderately sparse tracks. When adding cross-fades, often audio from other tracks will randomly play during a transition after rendering. This is audio from other tracks at the same point in the sequence.
The same thing happens if I cut the audio in fresh from the source, copy the problem area into its own teeny sequence and try again, trash prefs, etc. It also plays back with the mystery tracks soloed or not."
The cross-fades play through fine as expected until rendered.
Thanks!

Maybe I wasn't being entirely fair.
Most of the time, FCP does fine for what I need.
But when it chokes on something, I give it a few more tries then move on to something proven to work. (Troubleshooting can only last so long with looming deadlines.)
My guess is, if Final Cut comes bundled with programs like Motion and Soundtrack, that means there are probably going to be some things that FCP won't do particularly well on it's own.
Like we've said to the Avid die hards: These are just tools - use what works.
You can get a screw out with a pair of pliers, but it's a lot easier with a screwdriver. Err, unless the screw is stripped. But that just means there's a problem with your... media?

When is Apple going to fix this iTunes update issue? I can't open or re install my iTunes.

Is there anything they are going to do so I can add more music to my iPod? Let alone access my iTunes library.

Solving MSVCR80 issue and Windows iTunes install issues.

Top 15 Issues/Fixes Needed in the next Premiere Pro release/update (CS6.5 or CS7)

I’m excited for what’s coming next in Premiere Pro CS6.5 or CS7 (whichever update is next). As a former FCP7 user myself, Premiere CS6 was a quick and necessary switch (especially after changing the main keyboard shortcuts back to what I was used to). I’ve since gone back to FCP7 on occasion for certain things and I can tell you that I’m so glad I’ve switched. For all the headaches and serious errors that I still get daily/weekly with Premiere Pro CS6, it’s still definitely a big step up. I'm encouraged by staff members like Mitch W. that have expressed confidence that many of these issues will be resolved in the next release. Here is my personal list of “Top 15 issues/fixes” needed in the current Premiere Pro CS6…
(Adobe STAFF...feel free to print this out and hand it to the engineers responsible for making changes )
1) The infamous multicam FLAW. Needing no introduction…when you are editing your video in the multicam window and you hit pause or stop Premiere has decided that’s a great time to make a cut on your timeline and also switch angles back to the original angle whether you like it or not. You cannot stop ever while editing multicam without Premiere making these unwanted cuts and angle changes. Awful. Multicam in PPro is otherwise pretty nice, but this issue is terribly counter-productive especially when you are editing longer complex multicam sequences. Imagine if every time you hit pause or stop in the regular timeline it made a cut there and switched clips. Ugh. You get my point.
2) The audio meters/levels do not work while in the multicam window. A staff member in the forums (I think it was you) said this was a bug. Hope it will get fixed. The audio levels work in every other window and its essential to be able to keep an eye on the levels while editing multicam.
3) Ticktime.cpp-207 error. Ugh. What a nightmare. I have confidence that it will be fixed soon. Mitch W. from the forums is my new hero for taking on this error. How to replicate it?…simply have 6 (or 7) or more clips with the warp stabilizer effect added on the same timeline as a nested multicam clip and you get this error upon reopening your project. The more warp stabilizers you use, the more times you’ll have to hit “continue” to get through the error before you can open your project or export it to AME. I deal with this every single day because all my projects use these two elements. Most of my projects I have to hit “continue” on the error message upwards of 350-450 times to open my projects. Gets old fast.
4) Icon View order control. When you display all your clips in icon view instead of a list view (In the project window), there is no metadata to allow you to put the clips in order somehow (or at least maintain the order that you have in the list). There are roundabout workarounds, but c’mon.
5) Warp Stabilizer fixes…it is an AMAZING tool (far, far, far better than smoothcam in FCP7) BUT…it has it’s issues. Since I use hundreds of times/week (no exaggeration) I know it’s functions/flaws really well. The issues with Warp Stabilizer:
a) #3 above
b) Toggle OFF the effect after it’s applied and then hit Analyze again and PPro crashes. (easy to avoid but annoying bug)
c) If a clip is in the middle of stabilizing (not just analyzing…but the final step labeled “analyzing”) when Auto-save comes up…most of the time PPro freezes and crashes.
d) The DEFAULT “method” (in the settings for Warp Stabilizer) should NOT be “Subspace Warp”…it should be “Position, Scale, Rotation”. Why? It’s FAAAAARRRR better and more efficient. 95 out of 100 times it causes MUCH less “wobble” in the final stabilized clips AND most importantly 95 out of 100 times it scales the video less. Way better method.
6) The ability to open multiple projects simultaneously. As simple as FCP7 had it…or even better…as cool and efficient as FCPX does it would be nice.
7) The ability to mark a clip and not just a point on a timeline (because if you move the clip, the marker doesn’t go with it). I know you can use “Clip Marker” but it's very limiting, can't be moved, can't add notes, can't advance to the next marker (as far as I know). Also a marker list like FCPX has would be nice so you can see your markers all in a list at a glance and adjust them as needed.
8) Ability to select a clip in the Project window and find out where it’s used in the timeline. I LOVE how you can do the reverse and take a clip in the timeline and “Reveal in Project Window” but it would really help to go the other way around. Dealing with several hundred clips for every project I’ve missed this feature from time to time (FCPX handles this really well).
9) Add a through-edit indicator in timeline and “re-join clips” option. If you cut a clip but keep both clips together it’s just one continuous clip. But I really hope Premiere adds the not only an indicator of some sort (like FCP7′s way of having two small red triangles facing each other on that cut) so you know it’s one continuous clip BUT ALSO the ability to right-click and “re-join” the two clips into one.
10) When clip is double-clicked in timeline, CTI position in source viewer should match location in timeline. This one is pretty annoying and a fix would be incredibly helpful. The way it is now is very counter-productive. Definitely hope this gets fixed ASAP.
11) Better border controls for images/videos. Can’t do much with images right now in PPro. At least allow to customize the color and size/strength of it’s borders and shadows.
12) Better support for Mac/Apple's top end computers/GPU's. I'm still surprised that 2011 top of the line iMac cards (AMD 6970M) that have 2gb of ram are not supported. I’m sure/I hope 2012 iMac’s will be supported with their new Nvidia GPU’s…but I’ll hold out hope that the top iMac (up until 3 months ago) is supported at least at it’s full power. All around better Mac support would be great considering the wave of new users coming over from FCP.
13) Opacity/Transparency issues with EXPORTED videos with Cross Dissolves, etc. For some odd reason videos exported from Premiere CS6 have issues with cross dissolves or minor transparency. I’ll try to explain…in the program window of PPro CS6 cross dissolves look fine. Also, if you take a clip and stack it on top of another clip and put the top clip at say 99% opacity instead of 100 it looks like it should in PPro. But, if you export the clips you’ll quickly see that there are issues. It’s almost like the exported videos dissolve from 5 to 95. They skip the subtle beginning (0-5%) and subtle end (95-100%) of any fade. A clip in PPro as described above that is on top of another but set at 99% will look more like 90-95% in the exported file ESPECIALLY if the two clips are contrasting (eg. top layer dark, bottom layer with bright elements). It’s like the opposit of ease-in/ease-out. I have to ease-in/ease-out of every dissolve to avoid this issue…and even then, it’s not THAT much of an “ease” as one would hope. Another user in a forum once posted a video that shows how abruptly exported videos end their transparency changes…see: THIS SAMPLE VIDEO Perhaps this is a GPU/processing issue with AME vs. Premiere Pro but whatever it is, it should be fixed so videos you export look like the videos you edited!
14) Better control in Creative Cloud over which devices are “activated/deactivated” We have 3 computers and it would be nice if one could log in to their Creative Cloud account and see a list of which devices they have and just toggle on/off which one’s are activated/deactivated. This is especially helpful when you are mobile and forget to deactivate one of your two home/office devices so you’re stuck now until you get back to the home/office to deactivate it. This is not a Premiere thing, but just a general wish.
15) Ability to sync multicam clips automatically using the audio. Plural eyes apparently does this well. Would be nice to have it built into Premiere like FCPX does. Select all the shots you want to sync, One button click, wait a few seconds, done.
That’s my top 15. Everything else is awesome in my opinion for what I do 10 hours a day 6-7 days a week. I’ve included bug reports/feature requests for all of these at one point but if you are someone else reading this go to the following link and ask for these issues to be fixed: FEATURE REQUEST/BUG REPORT
I wish Adobe did smaller updates more often. Because even if they were smaller updates, we’d at least know you are working on fixing some of these issues that have plagued this NLE for years. Holding off fixes for one or two big “updates” every year is tough to deal with in a world of the ever updating apps we live and play with daily on our phones. I realize Premiere is a much larger scale and far more professional than a phone app, but hopefully you get my point. Here’s to hoping the next release (NAB 2013?) resolves all my top 15 issues. Here’s to hoping that these issues will be resolved sooner than later so I can stop raising hell in various forums. I’m honestly ready to start praising and defending Premiere Pro instead of griping about it’s bugs and flaws. It’s a fantastic program “on the way” to being the best. I hope.

Nice list, however it does seem a little bit like you may be hoping that Adobe provides the Final Cut 8 package that Apple never delivered on. Having edited primarily with P-Pro for the last decade, I hope Adobe focuses more on getting the next release to run as smooth as CS5x does, strangling and crucifying all the codec and playback bugs that arose in CS6. To me, it appeared that too many of the changes in CS6 were semantic or cosmetic, meant to give a FCP user more familiarity. Why change the name of an edit function from "overlay" to "overwrite" after 15 years? Because it enhances the product, or because that is what Apple called the function in FCP? If Adobe renames the Program Monitor to the "Canvas" with the next release, I think that I might be sick. There were nice additions to the Creative Suite as a whole, but I hope the next Premiere release reverses some missteps made in CS6, and focuses more on stability and enhanced functionality. I also really hope that they have an open ear towards criticism; Apple did not and their users ended up with FCP-X
It saddens me that the fixes I want most in a future release were purposeful changes between CS5x and CS6x.
1) Provide the options for transport controls in the source and program monitors. All of the users at my office hate that the jog and shuttle were removed in CS6. JKL was an option prior to CS6 and if we liked it we would have used it. I keep reading the justification that this change was meant to save space and streamline the UI. I can't express cordially how much this bothers me to look at the empty wasted space in my CS6 UI where the transport controls should be. The experiment has gone on long enough.
2) Restore the 3 Way Color Corrector to its previous functionality. The 3 way color corrector has been effectively neutered in CS6. Where in CS5x and earlier releases one could separately target the input/output levels of Highlights, Midtones, and Shadows, CS6 has only a master input/output level control. Why is less control better? Is it a 3-Way Color Corrector or a 1-Way Color Corrector?
3) Restore Clip and Timeline markers to their previous functionality. I don't even.... I can't. A user shouldn't have to do work arounds to create a modicum of functionality. This again was an attribute that wasn't broken in earlier releases.
4) Simplify the the task of pasting media into a targeted track. As it is now, pasted items will always go to the lowest activated track instead of the targeted track.
Lastly I would like the Adobe Premiere teams to consider what an amazing accomplishment Premiere CS5x was. Upon CS5's release, a good portion of competitor's workflows became obsolete. CS5.5 refined, stabilized, and expanded functionality.
CS6 changed the UI around, moving or deleting buttons, changed keyboard shortcuts, and renamed functions. Oh, and added hoverscrub, you know...like FCPX. In exchanged there was loss of functionality, stability issues and broken codecs.
I really hope the next release is more like CS5x and less like FCPX

Issues fixed in FM 7.1 release

Adobe FrameMaker 7.1 for English, French and German was released on January 10, 2004. The following is a list of issues fixed in this release.
250374
FDK: FA_Note_PreSetAttrValue notification not sent for new elements. If a client subscribes to FA_Note_PreSetAttrValue events, it will get a notification when one changes an attribute by double clicking it in the Structure view. However, on creation of a new element through the element catalog, if an attribute is set, no notification is sent.
This issue has been resolved.
277554
FDK: F_ApiUnStraddleCells() does not work as expected.
When unstraddling cells through the API, all the cells except the leading cell have no paragraph end marks (they are completely empty). Clicking into such cells takes the text cursor to the location of the table anchor. Inserting a character into the paragraph with the table anchor seems to correct the table.
This issue has been resolved.
310049
FDK: F_ApiImport shows a dialog upon import of SGML entities.
When importing an SGML fragment by reference using F_ApiImport, FrameMaker displays a dialog asking whether the text inset should be updated automatic or manually. This setting should be controlled from import-parameters.
Currently there is no way of creating a client that imports a large number of SGML text-insets without having a user sitting by the keyboard and clicking OK for each imported entity.
This issue has been resolved.
314764
FDK: F_ApiDelete does not work properly on elements inside a TextInset. When you try to delete an element that is part of a TextInset, the whole TextInset is removed.
The work around for this is to unlock the text before calling F_ApiDelete and to lock the text after this call. The calls to unlock and lock the text are given below:
To unlock - F_ApiSetInt(docId, insetId, FP_TiLocked, False);
To lock - F_ApiSetInt(docId, insetId, FP_TiLocked, True);
387821
Microsoft Intellimouse Scroll wheel locks up FrameMaker when it's pressed or scrolled.
This issue has been resolved.
408675
Rotated PDF files do not appear on 24-bit or 32-bit displays.
This issue has been resolved.
463533
Non-unique ID tags cause inconsistent hypertext links due to multiple entries in the HTML export. If there are conflicting IDs in different documents of a book, non-unique ID tags are generated which cause this behavior.
This issue has been resolved.
507486
If you edit the MAKER.INI file by adding the line SplashScreen=Off, in the [Preferences] section, then the Help->About command crashes FrameMaker with Internal Error: 7004, 6048898, 7639747, 0
This issue has been resolved.
529757
(don't include) Marker element gets included and merged in PDF bookmarks with previous heading. In FrameMaker 6.0, the document prints to PDF as expected--the bookmarks in Acrobat PDF contain the Section2/Heading as expected, such as:
Spark Plug Threads
and Lamp Base and Electrical Fixture Threads
In FrameMaker 7.0, the document prints to PDF with the Section2/Heading merged with the Run.head marker element, even though Run.head is in the ''Don't include'' list of elements in the PDF Setup dialog box.
This issue has been resolved.
534856
The value of DPDFOpenBookmarkLevel is ignored when read in a MIF file.
This issue has been resolved.
534865
The values Default, All, and None of the ''Bookmarks expanded through level'' field (in Format > Document >PDF setup) are not retained when a FrameMaker document is saved and opened again.
This issue has been resolved.
535630
Windows Metafile (wmf) graphic (created from Microsoft VISIO 2002) causes "an error occurred while printing" but partially prints.
This issue has been resolved.
537955
ISOdraw CGM graphics and tables on the same page cause CGM stroke lines to be printed in White.
This issue has been resolved.
540408
Inconsistent dialog behavior between FrameMaker 6.0 and FrameMaker 7.0 when opening filename.sgm. Unlike FrameMaker 6.0, FrameMaker 7.0 displays the Unknown Filetype dialog.
This issue has been resolved.
540417
Inconsistent dialog behavior between opening filename.sgm and filename.sgml.
This issue has been resolved.
541912
TaggedPDF:fmpdfreflow plug-in - display of PDF file not good for shaded table cells. When table cells have shading in them, the PDF file does not show all the content of the shaded cells. This happens on Windows only.
This issue has been resolved.
565678
PDF generation on UNIX translates CMYK colors to RGB.
This issue has been resolved.
567784
FP_InsetFile has a value of "BadFileName" when SGML importing misses a graphic data file. If you import an SGML file that would read external graphic files and these data files are missing, then skipping or ignoring them results in "BadFileName" pathname for each object property. This makes FDK API Client not get FP_InsetFile property value for the FO_Inset object.
This issue has been resolved.
569092
FrameMaker7 server can't find default printer when launched as a service.
This issue has been resolved. To suppress the errors during initialization e.g.. No Default printer, invoke FrameMaker with the -silent option.
569969
When the Paragraph Designer is open, you can't switch to open documents using the book window.
This issue has been resolved.
581376
FrameMaker works very slowly or returns an internal error. When processing a document that includes many EPS image files, FrameMaker creates many FRMxxxx.tmp files in the C:\Documents and Settings\Account Name\Local Settings\temp\ folder. The xxxx is a hexadecimal number. Even after quitting FrameMaker, the FRMxxxx.tmp files are NOT deleted, and the same document creates different FRMxxxx.tmp files after being opened again. The template files pile up in the hard disk for the Account/user, until the xxxx reaches ffff, the maximum number for the 4 digits of a hexadecimal number. At or near this time, FrameMaker works very slowly or stops with internal error:7004,6643018,6765315,6712018.
This issue has been resolved.
581522
Imported PDF document with transparencies does not print correctly.
This issue has been resolved.
584633
Internal Error: 7004, 6055410, 7657059, 0 when saving/printing to PDF includes Bookmarks that include index elements. The crash occurs only on Windows. The problem occurs when you attempt File > Print to PDF, when you want to Generate PDF Bookmarks based on structure elements, and have the ''Sectlevel1'' element in the ''Include Elements'' pane, and that particular ''Sectlevel1'' element plus the length of the text in the index marker entries exceeds 256 characters.
This issue has been resolved.
589859
Post installation of Distiller 6.0, .tps file gets retained along with PDF and log file.
This issue has been resolved.
592974
Opening a large XML file in FrameMaker generates error 'Internal Error 7004, 6052770, 0....
When an XML file contained more than 65520(FFF0) children elements, FrameMaker crashed.
This issue has been resolved.
595875
Spell check skips elements, loops around elements, or gets completely stuck.
This issue has been resolved.
597276
The Save as PDF command does not create a PDF file (for certain files) when Generate Tagged PDF is ON
This issue has been resolved.
598056
Group4 fax encoded TIFF files imported in FrameMaker 7.0 don't display nor print--does not occur in previous versions.
This issue has been resolved.
600053
Display/Scrolling performance is very slow with documents having TIFF images imported by copy.
This issue has been resolved.
600497
Scrolling a document in FrameMaker using Page Up/Down button goes to previous/next page respectively. Scrolling a document using Page Up and Page Down button goes to the previous and next page respectively. User would expect to scroll to the previous/next screen instead of going to previous/next page using these buttons, as seen in other Windows applications like MS Word, etc.
This issue has been resolved.
601470
Links being dropped in SVG filter. Import an SVG file by reference (and the imported file has a link to another SVG file). Save this and reopen; the referenced SVG file is missing.
This issue has been resolved.
603668
The text in the markers gets included in the PDF Bookmarks. Do not include textual content of marker elements, such as Index markers. This is because if you do, the Acrobat bookmarks can appear created if the element has:
where Indexterm contains the marker text:
<$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDF
... You will end up with an Acrobat Bookmark containing:
How To Create <$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDFGood PDF ... which is not desirable.
This issue has been resolved.
606704
In Server Setup dialog box, user name of the form "domain\username" does not allow names starting with b, r, etc. While trying to get FrameMaker to talk to the WebDAV server, which is using Windows authentication, when we specify a user name of the form "domain\username" in the "Server Setup" dialog box (File | Workgroup | Workgroup Servers ...). For some user names this works; for others it doesn't.
This issue has been resolved.
607610
Framemaker crashes when Print is selected twice from the context menu for a book.
This issue has been resolved.
610099
Drop Caps are not imported as TextFrames (RTFImport).
This issue has been resolved.
610600
Words on which cross references are created are getting dropped while importing doc file (Word2000Import). Create a cross reference on some word in MS Word, and import the doc file into FrameMaker. The word on which the cross reference is created is getting dropped.
This issue has been resolved.
611165
Words on which cross references are created are getting dropped while importing rtf file (RTFImport). Create a cross reference on some word in MS Word, and import the rtf file into FrameMaker. The word on which the cross reference is created is getting dropped.
This issue has been resolved.
611802
Text which is rotated is lost when exporting to RTF.
This issue has been resolved.
611900
FrameMaker locks referenced files until the application closes.
This issue has been resolved.
613546
The filter name in the unknown file type for import is Microsoft RTF whereas for Export it is Microsoft RTF 1.6.
This issue has been resolved.
616153
Contents of anchored frames not visible after save as PDF with Tags. After saving a document with anchored frames as PDF with Tags enabled, the contents of the frame are not visible in the PDF generated.
This issue has been resolved.
624470
footnote element mapping to Frame Footnote is commented in Rules defined for XDocBook. In application definition of XDocBook in $FMHOME/structure/xml/xdocbook/app, footnote element mapping is to FM Footnote element. However, this rule is commented since past few releases. As a result, any (xdocbook) XML document with footnote is shown as invalid in FrameMaker.
This issue has been resolved.
624472
Revision remark (revremark) element is mapped to different element names in EDD and rules. Rules for XDocBook in $FMHOME/structure/xml/xdocbook/app translate revremark to RevRemark. However, EDD (ECM) defines Revremark as mapping for revremark element. Hence a valid xdocbook XML document with revremark is shown as invalid (with unknown RevRemark element) in FrameMaker.
This issue has been resolved.
624517
Unable to open FrameMaker 7.0-created fm file, which is created by importing a Word document.
This issue has been resolved.
625306
Office documents don't open in FrameMaker in absence of write permissions (UNIX).
This issue has been resolved.
626431
For line spacing, values that are beyond range are not mapped correctly (RTFExport). For line spacing in frame document which are beyond the max or min range of RTF, the mapping is not correct and same value of line space I mapped to three different values in RTF.
This issue has been resolved.
626434
For stretch, values that are more than 600 are not mapped correctly in RTF (RTFExport). For stretching in frame doc that are beyond max value in RTF (600), the mapping is not correct. There is no stretching (scaling in RTF) in effect in exported RTF for values greater than 600 specified in frame.
This issue has been resolved.
626450
Current date and time are not getting exported properly and are coming as 0's and XXX (RTFExport).
This issue has been resolved.
627855
After saving as PDF, headings are centered in reflow mode. After a particular file is saved as a PDF file and is viewed in reflow mode in Acrobat, the headings are centered.
This issue has been resolved.
631967
Installer does not recognize existing installation.
This issue has been resolved.
633133
Right indents are not mapped while importing Excel
This issue has been resolved.
633137
Data in the Custom formatted cell is lost while importing excel sheet.
This issue has been resolved.
633462
FrameMaker terminates while exporting to RTF.
This issue has been resolved.
633710
You have to give a filename with extension, while saving a file to RTF.
This issue has been resolved.
638750
A PS file generated from FrameMaker with Tagged PDF on and hypertext marker in the file, cannot be distilled to PDF
This issue has been resolved.
638824
Dialog Box indicating Unsaved changes made to file is not displayed on closing a document after importing an image using drag and drop.
This issue has been resolved.
639220
If you select a Master Page or a Reference Page and select Save as PDF, PDF generation fails without giving appropriate error message.
This issue has been resolved.
641918
When converting a FrameMaker book to PDF: default opening page in PS/PDF may be incorrectly set to be the first page of last chapter in a book.
This issue has been resolved.
642765
On drag and drop of a SVG file into FrameMaker, if you click on the cancel button on the Import SVG dialog, the cancel is ignored and the file is imported.
This issue has been resolved.
643092
If United Kingdom is chosen as the country of purchase, the EULA contains the string "FrameMakerDesktop _USEnglish_1.21.02_17:29".
This issue has been resolved.
644158
Following alerts can not be suppressed via command line option:
. Register now/later/never
. Adobe Online
These can be now suppressed using the -noaol command line option or by using the DisableAdobeOnline=On option in the maker.ini file.
644904
An empty merged cell(256 columns) created in Excel imports as a blank file.
This issue has been resolved.
645230
If you import a Word document having large number of footnotes in FrameMaker, the footnotes are overlapped.
This issue has been resolved.
645538
Cross reference text when exported to RTF has an additional space after the cross reference text.
This issue has been resolved.
645863
When an excel file containing cells applied with custom formatting is imported in FrameMaker, the font and color of these cells is different in FrameMaker.
This issue has been resolved.
646609
When a specific excel file is being imported the data in the first cell is lost.
This issue has been resolved.
646676
When saving a MIF file, then opening it in FrameMaker, the DPDFZoom settings are lost.
This issue has been resolved.
647770
User defined variables with _ in their name when saved to xml and opened again in Frame, round-trip as fmv1, fmv2 ...
This issue has been resolved.
648043
When you try to open/import a file with a name containing more than two % signs and at least 1 non-% character between the second and third % sign then FM gives an error saying the file is non-existent
This issue has been resolved.
648114
Info>Copyright>More crashes FrameMaker
This issue has been resolved.
648434
When you import an RTF file with a cropped image in FrameMaker, it is imported in its original uncropped form.
This issue has been resolved.
649640
When a word document having text with decimal numbering is imported, the sub points (1.1,1.2,...) are imported as (0.1,0.2,..)
This issue has been resolved.
650631
When you import a word document having numbering points with comment on each numbered point, the font size of the numbering point is reduced.
This issue has been resolved.
650962
FrameMaker crashes on scaling any anchored frame on reference pages.
This issue has been resolved.
652229
When you import a word file with ascending raised/lowered baselines then they are not imported correctly.
This issue has been resolved.
652433
When you import an excel file containing date formatting having mm format, FrameMaker inserts an extra zero before the date.
This issue has been resolved.
652752
If you install FrameMaker from network, the short cut to readme file opens it in notepad.
This issue has been resolved.
652794
The alert Inconsistent settings in Book" during F_ApiSilentPrintDoc() can not be suppressed.
This issue has been resolved.
654309
When you import a word document having numbering (1.1,1.2,..) placed after some non-decimal numbering(1,2,3), FrameMaker imports it as (3.1, 3.2,..).
This issue has been resolved.
654348
When you save an inline image as .doc in Acrobat6 and import this word file in FrameMaker, FrameMaker enlarges the graphics on import.
This issue has been resolved.
655072
When you have an user defined variable in the frame document as well as the template, you save this document as XML and open the XML file again in frame, the template definition overrides that of the document.
This issue has been resolved.
655726
Full license number is displayed in the Help>About FrameMaker 7.0 screen.
This issue has been resolved.
656171
Full license number is displayed in the FrameMaker 7.0 Splash screen.
This issue has been resolved.
656820
If you zoom or move frames after importing a graphic in FrameMaker, Framemaker logs out the user from Unix machine.
This issue has been resolved.
657053
If a frame document displays images from the reference page and you simultaneously open multiple such documents, then the images from the document opened first can replace the images in the other documents
This issue has been resolved.
658744
If you open an XML file locked by some other application, FrameMaker shows a Validation Error dialog box. For this to work, the XML locking feature should not be switched off.
This issue has been resolved.
658749
The German version of Online manual xmlcss.pdf has comments in it.
This issue has been resolved.
Known Issues
The printed user guide, on-line help and QRCs will not change between the FrameMaker 7.0 release and FrameMaker 7.1. Certain online manuals will be updated, and a new online supplement will be added to cover user documentation of the new release.
[Original message from Forrest_F accidentally deleted when Forum re-organized]

Read this SAP Note - Note 1487853 - SAP NetWeaver MDM 7.1 SP07 Release
or refer the link
http://help.sap.com/saphelp_mdm71/helpdata/en/4d/885f32b97d14aee10000000a42189c/content.htm
Similaryly read for SP06 fixes at - http://help.sap.com/saphelp_mdm71/helpdata/en/be/e0048b426b4c20957078b61ec71e46/content.htm
These links gives you an idea of what all changes are going to come into your new system. So unless you upgrade to SP07 i.e. the latest version and test it in DEV/Sandbox environment you should not plan to move ahead in Production. This is always recommended but there is very less chance that the already working solution will not work as expected after the upgrade.
Thanks,
Shambhu.

ITunes Skipping like a CD

I looked around in the community before posting this and no one has seemed to answer this or fix it.
This started happening recently. Songs that never skipped before are acting like a scratched CD. It's not the songs, because they play fine in finder. I don't have anymore programs open then I normally have. I usually keep safari, tweetdeck, x-chat and adium open all the time. When I'm working or cleaning the house I have iTunes open and it has never had an issue playing songs correctly. I don't know if it's a recent update or what, but I'm really getting annoyed with iTunes skipping on all of my music.
I have more then enough memory to run iTunes.

Hello again, Crystal.
Thanks for the update on your issue. Due to the nature of your issue you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action to get a more hands-on response.
Cheers,
Pedro.

ITunes 7 Skipping Issue Fixed - Cross Fade Playback

Similar Messages

Maybe you are looking for