ITunes 8.0.1 Installer - BAD!  VERY BAD!

I just got asked by iTunes 8 whether I wanted to install iTunes 8.0.1 (which I stupidly agreed to). As part of the install, it forcibly terminates Outlook, which if you have an Exchange server, results in a VERY nasty situation where Outlook cannot start again until you reboot (and sometimes not even then) because the Offline Folders were not closed properly. iTunes should NOT be forcibly terminating Outlook, or any other program - period. So far, I'm not impressed with iTunes (in fact, I think it's terrible) but this does nothing good for my opinion of it.
Anyway, I'm off to reboot now and hope that Outlook will start after I do so. Thanks for nothing, Apple.

I've had all kinds of problems. I had a working copy of iTunes v7+Quicktime on my computer. I running the upgrade to v8 the existing copy on my machine was damaged. After that I was/am unable to install any version of iTunes or Quicktime. I get a message: iTunes installer completed. The installer encountered errors before iTunes could be installed. You system has not been modified. To retry these operations at a later time please run the installer.
Click finish to exit the installer.
I have removed all traces of iTunes and quickTime including registry entries and tried to reinstall asny version without success.
Any help appreciated. I ran the windows installer removal tool and that has cleared out any trace of the programs.
Regards,

Similar Messages

  • My ipad can't connect to itunes store.. need help badly :(

    my ipad can't connect to itunes store.. need help badly :(

    have you tried quiting the app, ie removing it from the multitasking bar also, and then retrying it? Failing that, flick the ipad into airplane mode for a minute, then flick it back, wait for your wifi to connect then try again.

  • ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)

    I am providing all of the installation errors I had experienced
    and all of the methods I had tried until I finally came up with a solution.
    Hopefully the details will help you see if your situation has similarities
    which hopefully will make this post helpful in terms of a solution.
    PART ONE: INSTALLATION ERRORS
    I received the following installation errors
    when attempting to update to 12.1.1
    and later once I uninstalled and attempted to reinstall 12.1.1.
    I used this link for the download:
    http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
    > itunes 6464setup.exe
    I then tried this link:
    http://support.apple.com/kb/DL1614
    > itunes 12.1.1 64 bit
    Again 6464 in the name.
    After uninstalling the iunes,
    I discovered under add/remove programs:
    apple application support 32 bit
    and apple support update
    I deleted these and restarted the PC.
    I then tried reinstalling a NEW version
    from the second link above.
    Opened download iTunes 6464setup.exe >
    Windows installer> iTunes > welcome to itunes
    > next > installation options > install > user account control
    > yes > next > (error message via pop-up window):
    ERROR MESSAGE ONE
    "An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
    version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
    processorArchitecture ="amd64".
    Please refer to Help and Support
    for more information.
    HRESULT: 0X80070091"
    > OK > iTunes > Status: Starting services >
    (error message via pop-up window):
    ERROR MESSAGE 2
    "Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
    failed to start. Verify that you have sufficient permission to start system services"
    SIDE NOTE
    There was a USB cable connected to the PC to charge the iPhone,
    but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
    (I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
    I then clicked Retry.
    ERROR MESSAGE 2 AGAIN
    I received the identical 'Apple Mobile Device Service' error as above.
    I then clicked Ignore.
    iTunes > Status
    > User Account Control pop-up window)
    > Do you want to allow to install Apple iTunes>
    Yes >
    > Congratulations > Finish
    > (iTunes pop-up error window):
    > iTunes Helper
    ERROR MESSAGE 3
    a)
    "Apple Application Support was not found.
    Apple Application Support is required to run iTunes.
    Please uninstall iTunes and install iTunes again.
    Error 2 "
    > (iTunes pop-up error window)
    > iTunes
    b)
    "Apple Application Support was not found.
    Apple Application Support is required to run iTunes.
    Please uninstall iTunes and install iTunes again.
    Error 2 (Windows Error 2)"
    > OK > OK
    ERROR MESSAGE 4
    I received all of these errors above
    when I had tried a fresh install before returning to the forum to search for answers.
    When I had first tried a fresh install, I didn't get as far as the Congrats.
    I only got as far as the first and second error listed above
    ("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
    AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
    Clicked on iTunes icon on desktop
    ERROR MESSAGE 5
    I receive the (iTunes pop-up error message window)
    error 2 windows error 2 (identical to what's listed listed under 3b).
    PART 2 - INSTALLATION RESOLUTION
    The issue finally is resolved.
    HERE IT IS!!!
    1) Uninstall iTunes
    2) check remaining Apple programs
    (click control panel > programs > uninstall)
    > check the listed Apple programs
    Apple Application Support 32 bit,
    Apple Mobile Device Support,
    Apple Software Update,
    Bonjour
    3) Locate and save the correct file version of iTunes for your OS and System.
    In my case, it's Win 7.
    You must check for the System Type.
    Computer > right click to properties > system type.
    In my case its 64 bit.
    The 32 bit installer is named iTunesSetup.exe,
    while the 64 bit installer is named iTunes64Setup.exe.
    I learned that some folks had experienced issues with
    the 64 bit installer on the Apple site whether it's
    because they had downloaded the 32 bit
    when they needed the 64 and therefore
    couldn't complete the install or in my case,
    what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
    This lead me to believe that finding the file with the correct file name and
    correct file size to prove it authentic for that version would likely be part of
    the solution if not the solution. File Hippo is one suggested means to locate the file.
    I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
    to a valid copy of that version of ITunes and I set it aside.
    4) I then made sure that all old copies
    and remnants of iTunes and Apple software
    has been uninstalled by checking add/remove.
    Then C: program files
    and then C: program files (x86),
    then running CC Cleaner,
    then cleaning the registry using CC Cleaner
    and then checking Tools under CC Cleaner.
    ***I discovered under Tools that there were remaining Apple files listed
    after the uninstall of iTunes and other files had taken place under iTunes***
    I visit tools under CC Cleaner and deleted the remaining Apple files
    including Apple Application Support, Mobile Device Support, and Bonjour,
    ***but I leave the Apple Software Update folder as is, in tact***
    under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
    5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
    iTunes64Setup.exe, and it installed with zero errors.
    Hope someone will find this useful. Good luck.

    Try the "for older video cards" version.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I get this error when I try to install iTunes 10.7: "The installer has encountered an unexpected error installing this package. This may indocate a problem with this package. The error code is 2203."

    I am running Windows 7 64bit. I downloaded the latest version of iTunes and ran the installer. This message pops up, I click OK and the installation continues. Then, when I try to launch iTunes I get this: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)". I have also received this error message even when the installation hasn't had any problems. I have uninstalled, reinstalled, restarted, repaired my .net framework,  uninstalled all components following the steps in Article: HT1923 http://support.apple.com/kb/HT1923 all to no avail. It still won't run. It was working perfectly before I updated it to 10.7. After that it all went to crap. I even tried installing the previous version and still get this error message. Any suggestions?

    Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
    Just in case, let's try the fixit from the following document:
    Fix problems with programs that can't be installed or uninstalled

  • Hello when i try to down load itunes if says "This installation package can not be opened. Verify that the package exist and that can access it.  or contact provider" what do i do LOST

    ello when i try to down load itunes if says "This installation package can not be opened. Verify that the package exist and that can access it.  or contact provider" what do i do LOST

    Hi MrJavonte15,
    If you are having issues installing iTunes on your Windows machine, you may want to take a look at the following article:
    Apple Support: Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    If you have previously installed iTunes and continue to have issues, you may want to remove and reinstall iTunes:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Cheers,
    - Brenden

  • Why can not I install iTunes on Win 7 installation appears every time the next sunrise; service, apple mobile device, failed to start verify that you have sufficient privileges to start system services  Please help me

    Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
    service, apple mobile device,
    failed to start verify that you have sufficient privileges
    to start system services
    Please help me

    The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562

  • My ipod has 760 songs on it.  I had to reload my computer that contained itunes.  The new installation of itunes won't allow me to copy the songs into the library.  What can I do?

    My ipod has 760 songs on it.  I had to reload my computer that contained itunes.  The new installation of itunes won't allow me to copy the songs into the library.  What can I do?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • My laptop will not let me install the latest version of iTunes, it says 'the installer has insufficient piviledges to access this directory' and tells me to log on as the administrator, even though I am logged on as the administrator. Please help!!

    My laptop will not let me install the latest version of iTunes, it says 'the installer has insufficient piviledges to access this directory' and tells me to log on as the administrator, even though I am logged on as the administrator. Please help!!

    Hi Caits1988,
    If you are having issues updating iTunes on your Windows machine, you may find the following articles helpful:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Apple Support: Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    - Brenden

  • Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

    Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

    See if any of the following fix it.
    Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
    If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
    A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • Iphone 4s doesn't appear in itunes following iOS 6 installation

    iphone 4s doesn't appear in itunes following iOS 6 installation
    can someone help me out?

    No dice. See my comment above; I already turned that on before posting.
    To get your device to appear in iTunes and to automatically sync with iTunes, simply disable backup to iCloud on your iOS device. Voila! Your iOS device will appear in iTunes and auto-sync the selected content. For example, I'm now subscribing to a ton of podcasts that I used to manually download one-by-one b/c the tethered syncing process was just too painful. Now that my iPhone 4S appears as an always-connected device in iTunes, the latest versions of my podcasts shall auotmatically appear on the iPhone when I awake in the morning before my long commute to work.

  • HT1926 (iTunes) Problem with Windows installer package?

    (iTunes) Problem with Windows installer package?  I try to install the new version of iTunes but get an error "Problem with Windows installer package.  A Program required for this install could not be run."  Can anyone help shed some light for me as to how to correct this?  I have tried to install the program through Chrome, Explorer and FireFox but have had no success.  I have included a screenshot of the error.  Hopefully it's visable.  Thank you for any help.

    Found answer for anyone else curious.  I love the apple community.  Thanks guys for help!
    https://discussions.apple.com/docs/DOC-3551

  • Movies on itunes will not load or load very slowly and freeze on my apple tv.

    Movies on itunes will not load or load very slowly and freeze on my apple tv. both the computer and apple tv are wired connections on my home network. Checked the network speed and it is between 0 and 1 ms response. This problem just started last week. Only new software introduced recently was update to Norton 360.
    Thanks

    I know very little about windows but security software is notorious for causing the type of problem you have, you may want to contact Symentec and ask them which settings you need to change.

  • ITunes v7.0.2 - installs but won't set up

    Hey guys,
    I seem to have the same problem some other people on here have, I've just had a newer ipod that requires latest ITunes, it downloads, it installs, and then it just sits there and none of the files will respond to anything further, and it won't enter the Setup stage (not even the ITunes Helper file will respond).
    I've downloaded it to my dad's laptop and it functions fine on there (but not so great as not my computer with my library!), so I can't figure out what's wrong.
    I've tried everything I can think of:
    -the computer meets the min requirements;
    -the software (and MS Installer software) are allowed on my firewall;
    -I've tried msconfig to weed out any conflicting programs (and setting up a new, clean user account to see if system wide) - nothing;
    -I've checked for viruses that might affect it;
    -checked the file path
    -etc, etc, etc
    I'm stuck - anyone able to help? Suggestions on a postcard (or here) please.
    Any help would be much appreciated!
    S
    EMachines 2220   Windows XP  

    No error messages, just the hourglass for a couple of seconds then nothing.
    hmmmm. well, at least we've ruled out one of the most common causes of that. (NIS 2005 interference.)
    let's check on another few things.
    (1) try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)
    (2) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
    does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

  • IPodService module crash when iTunes 10 is in installation process

    OS: Win XP pro with service pack 3 32bit
    iPodService module crash when iTunes 10 is in installation process. System says that they can't run module. iTunes is run but work incorrect (for example I can't postpone my purchases from the phone to iTunes). I think that the problem of incompatibility of iPodService module with Servise Pack 3.

    I am having the same problem. I am running Windows XP SP3. I got the same message about not being able to start the iPodService. It offered me the chance to ignore the problem so I did. Big mistake. iTunes seemed to work ok until I tried to upgrade to OS 4.1 on my iPhone. Apparently the service was needed for that because the ugrade failed and my iPhone is completely hosed. I can't use it at all.
    I uninstalled iTunes 10 and tried to find iTunes 9.2.1 on the Apple site but can not find it anywhere. I can only find the Mac version. I found the Windows version of 9.1.1 iTunes. So I downloaded and installed it.
    When I started iTunes 9.1.1 it complained that the library file was created with a later version of iTunes (makes sense because I had version 10 installed). So I deleted all the itl files. This blew away my library of course which ***** but I figured I could recreate it.
    So when I hooked my iPhone up, I tried to do a restore on it so I could get my iPhone going again. No luck. I got a message saying that it rquires at least iTunes 9.2.1.
    So now I am COMPLETELY SCREWED. My iPhone is dead in the water. My iTunes library is gone. And I see no way forward.
    iTunes 9.1.1 won't work for restoring my dead iPhone
    iTunes 9.2.1 for windows cannot be found anywhere on the apple site as far as I an tell. (would love to be proven wrong on this!)
    iTunes 10 won't install on my machine.
    I looked at the system event messages in windows XP. In the application events I see:
    Faulting application ipodservice.exe, version 10.0.0.68, faulting module ntdll.dll, version 5.1.2600.5755, fault address 0x0001b21a.
    and
    Product: iTunes -- Error 1920. Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services.
    In the System events I see:
    The iPod Service service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    In the security events I see no errors or warnings, just info messages. None seem to be related to the iPhone or iTunes.
    I disabled my Symantec Firewall and Antivirus. Did not seem to help the iTunes install. I'm gonna try again just to make sure

  • Bonjour j'ai telecharger des applications je connecte mon ipod qui est bien reconnu et synchroniser par itunes mais lorsque j'installe les apps elles occupent de l'espace sur le disque mais ne sont pas apparentes sur mon ipod

    bonjour j'ai telecharger des applications je connecte mon ipod qui est bien reconnu et synchroniser par itunes mais lorsque j'installe les apps elles occupent de l'espace sur le disque mais ne sont pas apparentes sur mon ipod
    MERCI

    Google translight:
    Hello I download applications I connect my ipod which is well recognized and sync with itunes but when I install the apps they take up space on the disk but are not apparent on my ipod
    THANK YOU
    Try directly downloading/installing the apps directly on the iPod. If you are signed into the same iTunes account that originaly purchased the apps you will not be charged again.

Maybe you are looking for

  • How do I get music that is in my Itunes folder, i.e. my own music that was not purchased from the Itunes store, on to my ipod?

    How do i get music that i have put into my itunes folder, i.e. it was not purchased in itunes but from another source, onto my ipod? I have looked at a number of different discussions and none have given me the solution.  I have recently had to do a

  • How can I go back to a previous boot ROM version?

    Hi. I've been reading these forums for a long time...first time posting. The short story: I have a Macbook 5,2 running OS X 10.5 with boot ROM MB52.0088.B06, and I'd like to know how to flash the boot ROM version back to MB52.0088.B05. The long story

  • IPhone 6 and iPod Touch 5 not being detected by iTunes 12

    iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2 Tried changing the lightning conductor, that didn't help either. Re-installed iTunes but it was of no use. :/

  • CLOB -- Please Help! Urgent!!!

    Hi, I have a CLOB column in a table and I am using dbms_lob.createtemporary procedure to create temporary LOB locator in a package and it worked fine for us for about 5-6 months and now it is coming up with the error message: ORA-01652: unable to ext

  • ERP EhP4 causing dump in MIRO posting

    We just implemented ERP EhP4 w/SAPAPPL603 and are now getting a dump when using MIRO to posting a vendor invoice against a PO. The error seems to involve new logic for multiple account assignment introduced with this EHP.  The dump is in include LMRM