Itunes 8.0 using Airdisk causes Aiport Extreme to crash...

Hi,
After upgrading to latest version of itunes I have encountered ALOT of problems with my airport extreme base station. Basically, whenever Itunes starts or tries to access a file on airdisk drive it causes the airport extreme station to crash.
Any ideas? I'm running all the latest versions of relevant software, airdisk, airport etc.
thesite

Has it actually crashed your system? It doesn't effect everyone.
If it has crashed your computer make sure any logitech or HP drivers you have are up to date. It isn't really iTunes but the new USB drivers that come with it and get installed. The crash only occurs when you go to sync an iPod or iPhone.

Similar Messages

  • Itunes remote speaker using Airport Express and Extreme

    I have purchased an Airport Extreme and Airport Express, so I can listen Itunes music on my stereo system. For some reason, there is simply no remote speaker selection button on the bottom right of the Itunes windows. Does it has to do with the fact that I am using an old Mac OS X?
    My Macmini has no airport card, so I connected the ethernet to the Airport extreme, and plugged the Airport express few feet from the base. Nothing but an orange tilting light comes out of the little box. I can surf the net perfectly but the Itunes is ignoring all my investment on the couple of Airport boxes i purchase...What I am doing wrong?

    Yes, I thought that purchasing the Airport extreme as
    the ethernet interfase directly connected to the
    MacMini, was almost the same as having the airport
    card inside the Mini. Where did I get lost?? I have
    the extreme directly to the mini, and an express
    plugged somewhere close and nothing happens...
    The problem is that the mini can only stream iTunes to an Airport Express via Airport. While you have connected it to an Airport basestation, as far as the mini is concerned, it is working via ethernet because that's how the data is leaving the system. It doesn't have an Airport card, thus it can't stream iTunes content to an Airport Express.

  • Network causes Safari/Mail to crash

    Hi,
    Connecting to my school WEP network runs fine, however, trying to access the internet through a proxy using Safari, or trying to receive mail using Mail causes both programs to crash.
    Conversely, Firefox does not experience the same crashes.
    All this did not happen before the 10.5.1 update.
    Is there anything I have done/can do to sort this?
    Mykobrien

    I also found that Software Update Crashes.
    Here are the Crash Logs:
    Software Update:
    Thread 5 Crashed:
    0 libobjc.A.dylib 0x919a36e8 objc_msgSend + 24
    1 com.apple.CFNetwork 0x93216ec4 updateForHeaders + 167
    2 com.apple.CFNetwork 0x93216c69 httpConnectionResponseStreamCB + 87
    3 com.apple.CFNetwork 0x93216bbb connectionResponseCallBack + 86
    4 com.apple.CoreFoundation 0x935e8629 _CFStreamSignalEventSynch + 137
    5 com.apple.CoreFoundation 0x935ea1f7 CFReadStreamSignalEvent + 39
    6 com.apple.CFNetwork 0x932160e1 httpRdFilterStreamCallBack + 325
    7 com.apple.CoreFoundation 0x935e8629 _CFStreamSignalEventSynch + 137
    8 com.apple.CoreFoundation 0x935ea1f7 CFReadStreamSignalEvent + 39
    9 com.apple.CFNetwork 0x93201e0a _SocketCallBack + 1632
    10 com.apple.CoreFoundation 0x935df960 __CFSocketDoCallback + 640
    11 com.apple.CoreFoundation 0x935e0f95 __CFSocketPerformV0 + 133
    12 com.apple.CoreFoundation 0x935d664e CFRunLoopRunSpecific + 3166
    13 com.apple.CoreFoundation 0x935d6d38 CFRunLoopRunInMode + 88
    14 com.apple.Foundation 0x92bbe560 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 320
    15 com.apple.Foundation 0x92b5b04d -[NSThread main] + 45
    16 com.apple.Foundation 0x92b5abf4 _NSThread__main_ + 308
    17 libSystem.B.dylib 0x936d4075 pthreadstart + 321
    18 libSystem.B.dylib 0x936d3f32 thread_start + 34
    Safari:
    Thread 3 Crashed:
    0 com.apple.CFNetwork 0x93207a3f CFHTTPMessageCopyRequestMethod + 24
    1 com.apple.CFNetwork 0x93216edb updateForHeaders + 190
    2 com.apple.CFNetwork 0x93216c69 httpConnectionResponseStreamCB + 87
    3 com.apple.CFNetwork 0x93216bbb connectionResponseCallBack + 86
    4 com.apple.CoreFoundation 0x935e8629 _CFStreamSignalEventSynch + 137
    5 com.apple.CoreFoundation 0x935ea1f7 CFReadStreamSignalEvent + 39
    6 com.apple.CFNetwork 0x932160e1 httpRdFilterStreamCallBack + 325
    7 com.apple.CoreFoundation 0x935e8629 _CFStreamSignalEventSynch + 137
    8 com.apple.CoreFoundation 0x935ea1f7 CFReadStreamSignalEvent + 39
    9 com.apple.CFNetwork 0x93201e0a _SocketCallBack + 1632
    10 com.apple.CoreFoundation 0x935df960 __CFSocketDoCallback + 640
    11 com.apple.CoreFoundation 0x935e0f95 __CFSocketPerformV0 + 133
    12 com.apple.CoreFoundation 0x935d664e CFRunLoopRunSpecific + 3166
    13 com.apple.CoreFoundation 0x935d6d38 CFRunLoopRunInMode + 88
    14 com.apple.Foundation 0x92bbe560 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 320
    15 com.apple.Foundation 0x92b5b04d -[NSThread main] + 45
    16 com.apple.Foundation 0x92b5abf4 _NSThread__main_ + 308
    17 libSystem.B.dylib 0x936d4075 pthreadstart + 321
    18 libSystem.B.dylib 0x936d3f32 thread_start + 34
    Mail:
    Thread 10 Crashed:
    0 libobjc.A.dylib 0x919a36e8 objc_msgSend + 24
    1 com.apple.CoreFoundation 0x935d3aad CFRunLoopRemoveSource + 173
    2 com.apple.CoreFoundation 0x935d3c34 __CFRunLoopSourceRemoveFromRunLoop + 132
    3 com.apple.CoreFoundation 0x9356d083 CFBagApplyFunction + 131
    4 com.apple.CoreFoundation 0x935d3eb0 CFRunLoopSourceInvalidate + 176
    5 com.apple.CoreFoundation 0x935b23c6 CFMachPortInvalidate + 294
    6 com.apple.CoreFoundation 0x935b2d76 __CFNotifyDeadMachPort + 294
    7 com.apple.CoreFoundation 0x935b25c5 __CFMachPortPerform + 117
    8 com.apple.CoreFoundation 0x935d6941 CFRunLoopRunSpecific + 3921
    9 com.apple.CoreFoundation 0x935d6d38 CFRunLoopRunInMode + 88
    10 com.apple.Foundation 0x92bbe560 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 320
    11 com.apple.Foundation 0x92b5b04d -[NSThread main] + 45
    12 com.apple.Foundation 0x92b5abf4 _NSThread__main_ + 308
    13 libSystem.B.dylib 0x936d4075 pthreadstart + 321
    14 libSystem.B.dylib 0x936d3f32 thread_start + 34
    Also, Vienna (RSS Feeder):
    Thread 4 Crashed:
    0 libobjc.A.dylib 0x919a36e8 objc_msgSend + 24
    1 com.apple.CFNetwork 0x93216ec4 updateForHeaders + 167
    2 com.apple.CFNetwork 0x93216c69 httpConnectionResponseStreamCB + 87
    3 com.apple.CFNetwork 0x93216bbb connectionResponseCallBack + 86
    4 com.apple.CoreFoundation 0x935e8629 _CFStreamSignalEventSynch + 137
    5 com.apple.CoreFoundation 0x935ea1f7 CFReadStreamSignalEvent + 39
    6 com.apple.CFNetwork 0x932160e1 httpRdFilterStreamCallBack + 325
    7 com.apple.CoreFoundation 0x935e8629 _CFStreamSignalEventSynch + 137
    8 com.apple.CoreFoundation 0x935ea1f7 CFReadStreamSignalEvent + 39
    9 com.apple.CFNetwork 0x93201e0a _SocketCallBack + 1632
    10 com.apple.CoreFoundation 0x935df960 __CFSocketDoCallback + 640
    11 com.apple.CoreFoundation 0x935e0f95 __CFSocketPerformV0 + 133
    12 com.apple.CoreFoundation 0x935d664e CFRunLoopRunSpecific + 3166
    13 com.apple.CoreFoundation 0x935d6d38 CFRunLoopRunInMode + 88
    14 com.apple.Foundation 0x92bbe560 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 320
    15 com.apple.Foundation 0x92b5b04d -[NSThread main] + 45
    16 com.apple.Foundation 0x92b5abf4 _NSThread__main_ + 308
    17 libSystem.B.dylib 0x936d4075 pthreadstart + 321
    18 libSystem.B.dylib 0x936d3f32 thread_start + 34
    Does anyone understand this stuff?!!!
    Mykobe

  • Using airdisk- how fast is it?

    my macbook (2 gh, maxed the memory at 2gb, still have the 80g hd it came with) is more or less too small for me at this point, but instead of shelling out for a new computer i'm trying to extend the hard disk with an external hard drive. i'm thinking about trading up from my current airport express to the EXTREME! version so that i can use airdisk to access the drive instead of having to be plugged in. is this a good idea, or will i be dealing with slowness and frustration? anyone have experience or tips about trying to do this?

    rosesandhello wrote:
    welcome to the discussion area, rosesandhello !
    i'm thinking about trading up from my current airport express to the EXTREME! version so that i can use airdisk to access the drive instead of having to be plugged in. is this a good idea
    many users do this and are very happy with the performance. i have an external drive hooked to each my TC and my extreme.
    for my iTunes library, however, i prefer using a firewire 800 drive connected directly to my MBP.
    or will i be dealing with slowness and frustration?
    Tesserax recently posted
    +Use the following guidelines for typical throughput performance of an AirPort Disk depending on how the network client is connected to the AirPort Extreme:+
    +o 5 GHz 802.11n: 2 MB/s (write) / 3.5 MB/s (read)+
    +o Gigabit Ethernet: 3 MB/s (write) / 6 MB/s (read)+

  • Music files on external HD, Aiport Extreme, multiple computers

    I have all of my music files (about 400 GB) on an external hard drive which is attached via USB to an Aiport Extreme router. I am using a MacBook (black) to rip and play those music files wirelessly from that external hard drive, using the iTunes Library index/data file that resides on that MacBook (black).
    I would like to be able to play the music that resides on that external hard drive on two other computers - a MacBook Pro and a Windows desktop, each of which have access to that Airport Extreme router that the hard drive is attached to. (I don't necessarily need to rip or download from either of those machines. Just play. The MacBook black will be the "main" iTunes machine.) What is the best way to set up and run iTunes on those other two machines? Just point their own iTunes Library index files at the Airport Extreme and let them Add To Library in iTunes, on each machine, all of the songs on the hard drive? Do I need to be careful about confusing each of the Library files with each other or keeping things "matched up"? Also, I certainly don't want all that music to load onto the hard drives of those two machines.
    Keep in mind, this is not a case of having a "server" that is always on, nor is the Airport Extreme/external HD setup a true "intelligent" NAS setup.
    Thanks!
    TimH

    Hello dsbailey3,
    It sounds like your music is on an external hard drive, and you would like iTunes to point to that library and store all your music files there.  I found some resources that you can use achieve this. 
    To choose the iTunes Library on your external drive, follow these steps:
    Steps to create or choose a different iTunes Library file
    If iTunes is running, quit iTunes.
    If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
    You should see the following screen:
    You can then choose the iTunes Library on your external drive.  You can find the full article here:
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/HT1589
    Once you have iTunes pointing to that library, you can consolidate your iTunes Library so all the files are stored in one place:
    To consolidate your library:
    Choose File > Library > Organize Library.
    Select “Consolidate files.”Files remain in their original locations, and copies are placed in the iTunes folder.
    To create folders (Music, Movies, TV Shows, Podcasts, Audiobooks, and so on) inside your iTunes folder, and place all your imported media files in the appropriate folders, select “Reorganize files.”
    You can find the full article here:
    iTunes 10 for Windows: Consolidate your iTunes library
    http://support.apple.com/kb/PH1459
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How do I get songs from iPod(video) to iTunes(7 and using VISTA).

    How do I get songs from iPod(video) to iTunes(i'm using iTunes7 and Vista).
    I don't have the disc, cause i can't find it. But my computer downloaded the ipod, it just cant find the files?
    i've been looking through the topics for the past hour and none of them helped. Maybe i'm stupid i dont really know, but i've restored my old computer a couple times and i found a post and it helped both times. now i can't find it anymore.
    THIS IS THE ONE I'VE BEEN SEEING AND IT DOESN'T HELP ME ONE BIT:
    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    SharePod Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.
    Can someone give me a link, or tell me one that shows step by step.

    Here is a way of doing it, for another take on this, search the forum for posts by Zevoneer.
    Copy from iPod to PC
    It is important not to allow your iPod to sync with an empty library. If it is set to synchronise automatically you will get a message saying your iPod is linked to a different library and asking if you want to sync – it is important to press cancel as syncing with an empty library erases all music from your iPod.
    You can also prevent auto sync by holding down shift & ctrl as you plug in your iPod and keeping the keys held down until the iPod appears in iTunes.
    Once you are connected, you need to set your iPod to manage music manually.
    http://docs.info.apple.com/article.html?artnum=61148
    If you have an iPod with iTunes Store purchases on it, you can use it to copy your purchases to other authorized computers.
    http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2586win.html
    However this is not allowed for other music.
    This MacMuse tip tells you how to copy music from your iPod using Windows Explorer, but it is a bit fiddly:
    http://discussions.apple.com/messageview.jspa?messageID=797432
    Otherwise you can use third party software to manage the transfer, there are a variety of programs out there, some free and some that will copy ratings and counts as well as the music files. Here is a selection, check them out and see what suits you.
    http://www.yamipod.com/main/modules/home/
    http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
    http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage
    http://www.copytrans.net/
    You can find others by Googling: copy iPod to iTunes
    There is a useful background article on copying from your iPod here:
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/

  • HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
    Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
    As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
    Is there a way to resolve this issue?

  • Using AirDisk for backups

    Does anyone know if there is a way to rsync or otherwise do a fast copy (perhaps through scripts) directly to the AirDisk. Ideally I'm thinking would/does AirPort Extreme n support rsync directly or offer an rsync url so that the source Mac doesn't have to do the extra lifting by being forced to do a local rsync when in fact the destination drive is remote (AirPort Extreme n).
    Example rsynd I do is,
    sudo rsync -WavE /Volumes/localsourcevol/ /Volumes/AirDisk_vol/
    but it is incredibly slow and tends to slow down over time. For example, an rsync operation that would take perhaps 30min between a PM G4 (wired) and an iBook G4 (wireless), has taken over 16hrs (without signs of being anywhere near complete so I usually kill the rsync) from the PM G4 to the mounted AirDisk on the extreme that would otherwise be routing the traffic to the iBook.
    Something else I've found painfully slow and typically ends up failing as a result of timeout is Backup 3.1 (courtesy of .Mac) to backup my homedir to the attached AirDisk. Generally it seems the drive falls asleep and the AirPort is unable to wake when activity demands it.
    I'm using a WD My Book Pro Edition II 1TB (the triple interface model) drive attached to the AirPort Extreme N in RAID1 mode (mirrored so I have ~500GB capacity).

    I would love to hear if you ever get this to work. My experience with AEBS has been quite poor.
    The most obvious problem is that AEBS does not support owner and permissions. This quite excludes backuping a bootable volume to it.
    laavu:/Volumes/User User$ mkdir aFolderOnAAEBS
    laavu:/Volumes/User User$ sudo chown root aFolderOnAAEBS/
    chown: aFolderOnAAEBS/: Operation not supported
    laavu:/Volumes/User User$ ls -ld aFolderOnAAEBS/
    drwxrwxrwx 2 User User 264 Jul 19 00:39 aFolderOnAAEBS/
    -Pete
    iBook G4   Mac OS X (10.4.8)  

  • Importing photos to my ipad 2 on iOS 4.3.2 using camera connection kit causes photo app to crash

    Importing photos to my ipad 2 on iOS 4.3.2 using camera connection kit causes photo app to crash. Tried importing photo from an iPhone 4/ Panasonic DMC-FX50 via USB and SD card but without success. However, importing video from a Flip Mino HD is ok. Can't seem to figure out what I'm doing wrong

    Have you tried a reset by holding the power and home buttons for ten seconds until the apple appears?
    Since it's multiple different import devices not working with the CCK, it appears to be on the iPad side...
    If the reset doesn't help, try a restore from within iTunes on the computer.

  • ITunes has stopped working: (Aproblem caused the program to stop...

    After I installed the the 64 bit I-Tune for widows 8, iTunes is crashing and I am getting the following message: iTunes has stopped working: (Aproblem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available). Please advise on how to solve this problem.

    Hi CCGoldwing,
    Thanks for using Apple Support Communities.  This article has steps you can take if iTunes is unexpectedly quitting:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Cheers,
    - Ari

  • Setting up Aiport Extreme for wireless hard drive access

    I recently bought an Aiport Extreme Base Station, but I am struggling to set it up.
    I want to use the Extreme to access my external hard drive (a Western Digital) wirelessly. I also have an Airport Express, which I currently use to extend my wirless network, and to connect to my speakers with AirTunes. My goal is to access and play my music library (contained on my external hard drive) without wiring my macbook to any external devices.
    I already have an adequate wireless network in my home (my wireless router is a 2Wire 3800HGV-B, provided by AT&T).
    So, I've already tried to set up the Extreme and failed. Rather than describe what I've tried already, let me tell you what I want, ideally:
    1. Access my hard drive wirelessly
    2. Access the internet and my hard drive at the same time (I assume this means that I need my Extreme to join my existing wireless network rather than create a new network, since i don't think I can be on two wireless networks at once)
    3. Keep my Airport Extreme in a separate room from my 2Wire Gateway (this is preferred but not essential -- if they absolutely need to be connected with an ethernet cable for some reason, I can do that)
    Can anyone help me through the setup process? In case you haven't noticed, I don't really know what I'm talking about, so step-by-step instructions would be much appreciated. Thanks!

    nononoah, Welcome to the discussion area!
    The AirPort Extreme base station (AEBS) will not wirelessly join the wireless network provided by the 2Wire.
    You will need to either connect the AEBS to the 2Wire via Ethernet or replace the 2Wire with the AEBS.

  • How I can change gateway from Lan private,aiport extreme

    I get 2 aiport extreme for my company, I set it in my network private, but I need change the router old with same configuration, this route have gateway 192.168.1.254, and I need set the same gateway  in My aipor extreme. for  public ip with dhcp and nat, but airport extreme assigned  for default 192.168.1.1: how I do to change gateway to 192.168.1.254?

    You will not believe this.. but it is not possible.
    You do not directly set the IP of the AE. It is set by dhcp when you select the first two octets.. then the third you can set to your liking.. but the last octet for the actual IP of the TC is set automagically and always to .1
    There might be a work around.. don't you just love it when apple make these things like this.
    Export the configuration file.
    Now open that file in textedit.. locate the current ip address.
    <key>laIP</key>
              <string>10.0.1.1</string>
    Change it and save the file.. then import it into the AE..
    I am using my TC right now as PPPOE client and it is not being co-operative.. it might work.. it might not.. do locate every instance of the current base IP and change to your new one.
    Good luck.

  • Can´t see 2 external HD´s connected to Aiport Extreme

    I can´t seem to find/see my two external HD´s inside Final Cut Pro X.
    I have my two G-Drive HD´s hooked up via a USB-hub to my Aiport Extreme and therefore running wirelessly from my Macbook Pro. It all works just fine by having referenced files with Aperture this way...
    Must the external HD be physically connected to the Macbook Pro to be able for it to see inside Final Cut Pro X?
    The format seems to be say "AppleShare" when I look on the Info on each drive.
    I am running out of storage space and also for the future would like to use an external for saving my projects and event files.

    Let's double-check your AEBSn's settings...
    AirPort Extreme Base Station (AEBSn) - File Sharing Setup
    Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
    Disks - File Sharing
    o Secure Shared Disks: <With disk password | With base station password | With accounts >
    (Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
    If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
    o Guest Access: <Not allowed | Read only | Read and write>
    o Share disks over Ethernet WAN port: (unchecked)
    (Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
    o Advertise disks globally using Bonjour: (unchecked)
    o Workgroup: <Windows workgroup name>
    o WINS server: <WINS server IP address>

  • HT1849 if you buy an album/song of itunes does it use up your computer downloads?

    if you buy an album/song of itunes does it use up your computer download? do u have to pay for download?

    Each album is roughly 100 MB.  If you are using an internet data plan that is not unlimited, that will count against your cap, or may cause you to exceed your cap, depending how much you have used already.

  • I bought the wrong gift card. I wanted to buy an itunes gift card but instead I accidentally got Apple store gift card via email. How can I buy an itunes gift card using my apple store gift card?

    I Wanted to buy itunes gift card but instead I got apple store gift card accidentally how can I buy itunes gift card using my apple store gift card?

    You can't from Apple, they don't let you buy iTunes gift cards with an Apple Store gift card. You could see if a different store in your country might let you (though they possibly won't), or try selling the card to somebody e.g. family, friend, eBay etc

Maybe you are looking for

  • I accidentally deleted the built-in Maps app from my iPhone 4s. How can I get it back?

    I'm not sure how I managed to delete it, since I thought built-in apps couldn't be deleted. It's also missing now on iTunes so I'm at a loss as to how to get it back. Tried shutting down and restarting but that didn't work.

  • Issue with WSDL created for sender agreement

    Hi, Can you please help me why I am getting the erroe with WSDL that has been created from directory Sener agreement in PI 7.1 EHP1? My interface is a SOAP to file ASYNC scenario and we have been given 5 XSDs that are referencing one each other ,5 XS

  • Error: Unable to find matching navigation case

    Hi all, after I wrote this thread: ui:include if I pass a variable, some one can tell me some tips? I do some step forward and now the application returns this error: Unable to find matching navigation case with from-view-id '/include.xhtml' for acti

  • Separate iTunes Account

    I need to remove my son's devices (iPhone & iPod) from our iTunes account and set him up with a new separate account.  I need the existing account to remain for my use, and I don't want to lose his music and video library in the process.  This only b

  • Wfa_html.home web page cannot be displayed

    Hi guys, I have installed OWF 2.6 on Windows xp SP1. As I have the database on the same PC I installed the Oracle Companion in another oracle home. I already configured C:\ora10.1\companion\Apache\modplsql\conf\dads.conf to set the username and passw