ITunes 8.1.1.10 and Windows XP - seizing up? Keeps freezing one me..

Should I be expecting problems using iTunes 8.1.1.10 and 32-bit XP? I have always found iTunes stable as anything and championed it, but having updated today, the thing seems to freeze after a few minutes at most. Windows task manager then suggests iTunes is "not responding"; clicking on another track sometimes results in the new track starting after a couple of minutes, but mostly it is just frozen and I have to close the program and re-open it.
Apart from buying a Mac (thank you...), what might I try?

This is happening to me as well. it was also happening in 8.0 I believe and 8.1 or 8.1.10 was supposed to fix it. All I can remember is sometime between 7 something or other and current 8.1.10 it started.
It;s like it's too focused on one activity. I notice it most when a podcast is downloading. It doesn't "freeze" in the sense that it all locks because it always still shows its downloading. But if i click on anything while it's foing this my mouse click is ignored.
Another place where it is very evident and duplicatable:
I have a podcast that hasn't been active. I tell it to check and download. Later, I see the GET button for podcasts I have missed. It used to be that I could go down the click click click click and I tunes will start downloading. But now, I can maybe click one or 2 and then my mouse is ignored. Later, it is once again working.
So, it's like ITunes has developed this MYOPIA where it starts something and then says, in effect, "Not now I'm Busy" by ignoring the mouse click when I want to do something else - - -even if it's as simple as going to Music folder.
I hope this gets fixed. It's very anoying

Similar Messages

I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured. Using itunes 10.5.2.11 and Windows Vista 64

I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format"

I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!

It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock

HT1473 I have two separate iTunes libraries on different computers and I would like to compact into one. But I cannot without completely erasing one of the libraries. How can I do this without deleting anything?

I have two separate iTunes libraries on different computers and I would like to compact into one. But I cannot without completely erasing one of the libraries. How can I do this without deleting anything?

Copy the content from one computer to another and import the media into iTunes.
Any playlists, playcounts, etc on the computer the content is being moved from will be lost.

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

i have tried:
reloading itunes
unchecking 'write'
removing lower filters in regedit
ensuring i had the correct 'gear' info in the upper filters in regedit
removing 'gear' from regedit, system32
reloading updated version of 'gear'
cleaning my registery
deleting itunes
cleaning registry again
reloading itunes
cleaning registry again
i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
the above is not the case as it also popped up for me to import cd to itunes.
i tried to copy and past the entire contents here but it would not allow me to paste.
please help!

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

My ipod 1st gen battery went totally dead because the usb cable was defective. I've changed the cable. now when i connect my ipod to the netbook, itune is not launching automatically and windows does not recognize it......how can these issues be resolved

My ipod 32gb 1st generation battery went totally dead because the usb cable was defective. I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. Nonetheless it is charging. However can i resolve these issues bearing in mind that i am not tech savvy?

have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.
Try disabling a/v software and turn off the Firewall on your PC.
Disable antivirus software
Turn-Windows-Firewall-on-or-off
Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
http://support.apple.com/kb/TS1538
Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
Select the box next to: Open iTunes when this iPhone is connected
That way iTunes should open automatically when you connect your iPod to your computer.
And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane.

Can i use my external itunes media folder on mac and windows

Ok, i have moved my media folder itunes to my external drive.
But i also have installed windows 7 on bootcamp
I want to use the same itunes media folder external on my osx and windows is this
possible didn't tryed it because i was afraid that i could damage the data.

Hi
Yes there is a way to use the media folder with both OSX and Windows, however you have to have the drive formatted with windows NTFS and use something like Seagates NTFS for Mac program. If you buy a Seagate GoFlex Drive it comes ready formatted with the software on board to install on your mac, then anything saved on the drive will be readable from both OS.
I use a couple of these drives for just that purpose very successfully, unfortunately I haven't come across an alternative to buying the Seagate drive.
Hope this helps.
M.

I cant open itunes. Get error 7 and windows error 5. How do I resolve?

I updated to latest version and cannot now open iTunes. I get Error 7 and Windows error 5. does anyone know what the issue is and how to resolve it? I have Windows 7 and the .Net Framework 4 or above and my pc will therefore not install it.

alexcookson,
The steps detailed in the article linked below can resolve this error (alternatively "Error 7") and help get iTunes to work on your computer.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/en-us/HT203328
All my best,
Allen

ITunes upgrade ver. 9 and Windows - Can anyone actually Connect to the STOR

Is there anyone out there that actually can access the iTunes store after they upgraded to ver 9 and is running it on Windows XP ???

Works for me. Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. In some cases users have reported needing to uninstall the utility completely and reinstall to get it to allow iTunes through. You may also need to check the built-in Windows firewall as well.
Hope this helps.
Regards.

How do you read a large ( 100Mb) 3-D matrix from a file and make sure that you keep only one copy of it within the LV program for future use?

I have to deal with large 3-D, I16 matrices that are stored in files. This data represents the density of an object at a sample point in 3-D space. I need to be able to display a 2-D section through the cube in an Intensity Chart. Since I want to update images in the intensity chart in real time to show different sections on demand I cannot adopt the approach of reading a section from the file when required - the I/O time assocaited with the disk read is way to long.
The solution, is to keep EXACTLY one copy of the entire data set in memory at all times and then just get the required section on demand.
This changes the disk I/O time to a memory access time, which is fast enough for my puposes.
Here is the problem. Since the matrices are so large, I want to be very sure that I only keep one in copy of the data in memory. After a couple of weeks discussioin with Tech Support, and the development of several sample programs, they have agreed that it is not possible to do it with less than two copies of the data in memory.
This additional memory requirement is a real problem for me and I am hoping someone is ingenious enough to come up with a way of doing it with only one.
I can send a sample program illustrating the problem if necessary.
Many thanks.

Jean Pierre,
Thanks for your reply - most kind of you to take the time. But.....
This is exactly what I thought, and is similar in concept to the way I wrote my code. But it doesn't work. I modified you llb slightly by setting the variables to be I16's and setting the default array size to 54,000,000 and the default action to be initialize. ( I'll enclose a copy of my modified llb for you.)
Here's what happened. I start the windows task manager, loaded LV and the program and looked at the memory shown in the task manager. It shows about 28Mb before I start to run the program. I then single step through the program. When it gets to the output of the Initial Array the memory usage jumps to about 134Mb, indicating the creation of the first copy of the array. As you continue single stepping it jumps to 239Mb as you leave the Case loop and head for the Shift Register. This memory does not drop down again.
After talking with Platinum Tech Support, they agree and tell me that they cannot see a way to have just one copy of the array. That's why I posted it on the message board to see if there was anyone out there who had come up with an ingenious solution. It seems to be a serious limitation to labview.
Let me know what you think.
Thanks once again.
Attachments:
HugeArrayMod.llb ‏92 KB

Cannot load Windows 7 - Satellite C660 keeps freezing

Hi Everyone.
This is a biggy. I have a Toshiba AMD Vision Satellite C660 / C660D laptop with no Windows installation disc. Last week it became very sluggish, then the interface resembled that of the safe mode interface and it finally became completely unresponsive, therefore, via F8 on start- up I selected the option which allowed for it to revert to factory settings (I no longer have this option)
The DOS screen appeared and started loading as normal then that become unresponsive so I restarted only to see Windows start up for the first time and carry on loading, prior to this I had to create a boot cd from my other laptop to reboot the system as I had lost the boot mngr.
The last part of the installation process began whereby a white Toshiba screen is displayed with a green progress bar that loads certain drivers (see attachment). There are 39 steps to this process and I seem to remember from before that the computer should keep restarting itself, but it keeps freezing after about two steps. I kept switching it off and eventually the system administrator locked my accounts.
Once again I restarted the PC but this time in safe mode The operating system did indeed load in safe mode and I created some new accounts with administrator privileges, however, I am still unable to load the whole operating system as it keeps freezing during the last part of the process.
I have very limited knowledge of loading operating systems so any help would be greatly appreciated.

Hi
First of all it was a big mistake NOT to create an Toshiba recovery disk.
The HDD recovery which you were able to start by pressing F8, is only possible if the HDD is not faulty.
I think in your case I think there is something wrong with the HDD because there was an boot mgr notification which means that notebook cannot find an boot manager in order to boot up the system.
I have no other idea as to try to reinstall the system using the Toshiba recover disk or another Windows 7 disk (of course if you own one)
If the recovery would fail, you have to investigate what hardware part might be affected. I think in such case its needed to start with HDD check.
Possibly the HDD needs to be replaced. Of course it possible that Im wrong an other part is affected but at first stage you need to check new OS installation.
A recovery disk can be ordered here:
http://backupmedia.toshiba.eu/landing.aspx

Itunes not recognising my ipod and windows asks me to format

Itunes is not recognising my Ipod when I connect to my PC. I've been using it for 8 years so this is out of the blue. I get this flashing up:
"Microsoft Windows
You need to format the disc in Drive N before you can use it. Do you want to format it?"
Bottom right of my screen
Safely remove hardware and eject media gives me the option to "Eject Apple iPod USB device"
I did that and now find my iPod has wiped all my stored items and I've had to reset date etc. Is this a Windows or an Apple problem?

Retracts 28
Reallocations 0
Pending 2
Power on 754
Start/stop 273
Temp 25c
Min 4c
Max45c
I'm afraid I got so frustrated with the PC crashing that I threw in the towel and ordered an iPod touch this morning after tentatively syncing my mini iPad this first, with no problems, just in case it was the PC. Iv'e changed it to wifi syncing now as a further precaution.
If I can get the Classic to work again I can at least try to sell it as a functioning model.

Sharing iTunes Library between Snow Leopard and Windows 8

My setup:
2006 Macbook, running Snow Leopard
Microsoft Surface Pro, running Windows 8 Pro
Toshiba 1TB portable external HDD
I am using my external HDD to host all of my media content, including my iTunes library. When I want to take advantage of the portability of my Surface Pro, I connect my external HDD to my MacBook, and use my MacBook as a media server. When it is connected this way, all of my music is in my iTunes Library. When I use my MacBook to listen to my iTunes library, all of my music is there. The problem is when I connect my external HDD directly to my Surface Pro, some of my music is missing. This is inconvenient because it leaves me without the ability to add new music or delete music from my iTunes library unless I am working on my MacBook. I have already tried ripping my iPod, which actually has ALL of my music on it, and transferring it directly to my external HDD. When it is connected to my MacBook directly, it looks like that actually worked. However, if I connect it to my Surface Pro or use my MacBook as a server and connect to my external as a network drive, the music is missing. Am I missing something obvious? Has anyone else had this problem?

Sounds like some of your music on external drive is in file format that Windows can't read. Am I missing something?

Itunes Shared Library between Mac and Windows isn't sharing videos properly

Hi, I'm a bit new to the mac world, but I'm the proud owner of a new macmini. I also own a Windows 7 machine.
My problem is with the Itunes Shared library. Itunes 10 on my mac is set up to share everything, including podcasts. I can see these from Itunes 10 on Windows, and I can play music (and audio podcasts), but video is hit or miss.
Videos downloaded from Itunes U tend to work, lectures and stuff.
Video podcasts (also downloaded from Itunes Store) and other videos don't work at all. Itunes just doesn't play the video, and doesn't even launch the "black screen". The timer remains at 0.00.
On the other hand, sharing videos from the PC to Mac works well, i.e. my mac can see the contents of the itunes shared library on Windows and play videos. It just doesn't work the other way around.
Thanks for reading and I hope this problem can be fixed.

Woops!
Here you go:
http://discussions.info.apple.com/message.jspa?messageID=10923818

ITunes 8.1.1.10 and Windows XP - seizing up? Keeps freezing one me..

Similar Messages

Maybe you are looking for