ITunes 8.2.1 update bug (-50) and changes to iTunes Photo tab

Many thanks in advance for your attention.
1. Since I updated to iTunes 8.2.1, have had the following bug whenever I try to sync my iPod Touch (2G). "The iPod " " cannot be synced - An unknown error occurred (-50)." pops up.
2. I have a file in iPhoto of just photos for my iPod (instead of the entire - huge - iPhoto Library.) Under iTunes, looking under the Photos Tab, this choice was "selected albums" - which allowed you to pick just one album from one's iPhoto Library to be synced. But this choice, the button, is now greyed out. It is there, but one can no longer select it.
3. ?
4. On top of that, the default - Sync All Photos from iPhoto is now selected. (I think this is the cause for the -50 error). I never intended to have my whole iPhoto library automatically imported by my iPod.
4. As others have done here, I turned off "Sync Photos" from iPhoto.
5. Then when I try to sync, no problem, no hitches. No Error prompts. Great.
6. But - this way, I am forever stuck with the photos that are in my iPod now. Adding new photos seems impossible, as the sync Selected Albums button is greyed out.
7. Have I overlooked something? From other posts, it seems this is a bug that is widespread.

same exact problem just happened within the last few weeks (something to do with snow leopard update??)..i had other wise been happily syncing a second generation touch with version 3.0

Similar Messages

Syching my iphone4 after updating to ios6 and now half my photos aren't showing up in my phone.

syching my iphone4 after updating to ios6 and now half my photos aren't showing up in my phone.

Did you restore from backup on iTunes or did you use iCloud?
Did you sync with iTunes? Is iTunes section for photos checked to sync all your photo locations?
Also, with photo streaming sometimes you need to switch from Album to photo stream to see some photos.
If your photos are on your computer still, they can be added back. if not and you depended solely on iCloud, then they may be gone.

Urgent!! How to update Planning book and change when planning will start

Hi Gurus,
I had configured the system and we can initilize planning area every month and my question is
1. How to update planning book and change planning start date every month?
Thanks a Lot
Regards,
Raj

Hi,
In the planning book-dataview, you will assign the time bucket profile, and will be on rollling basis. if you want the forecast profile on rolling basis, maintain the forecast and history horizon as periods then that will also be on rolling basis.
Regards,
Raj

Most of my photos including wallpaper and contact photos disappeared overnight and changed to stock photos. Why? How do I get them back?

Most of my photos including wallpaper and contact photos disappeared overnight and changed to stock photos. Why? How do I get them back?

Are the photos saved on your phone's SD card? Try removing and reinserting the card and restarting your phone.

I can't delete photos from my Ipad I have tried already removing and changing folders in photos app

I can't delete photos from my Ipad I have tried already removing and changing folders in photos app

If photos were synced from your computer then they can't be deleted directly on the iPad, you will need to remove/de-select them from where you synced it from on your computer and re-sync.
http://support.apple.com/kb/HT4236

After Effects CS6 (11.0.2) update: bug fixes and added GPUs for ray-traced 3D renderer

We just released the After Effects CS6 (11.0.2) update.
There are a lot of bug fixes and additions in this update.
See this page for details:
http://adobe.ly/AE1102
Let us know if you have any trouble with this update.

I have this too, with ML 10.8.2 - pretty sure you can't install custom drivers. Did you find a solution?
EDIT: Didn't realise I had to update the CUDA drivers manually on OS X! Downloaded from here: http://www.nvidia.com/object/cuda-mac-driver.html and all is OK

Where is the photo tab on itunes? My device is not listed on the left side of my screen and there is no photos tab on the right of my screen. I want to delete photo albums that were synced through itunes to my ipad 3.

I synced several photo albums to my iPad 3 from my computer through iTunes. Now, I would like to remove them and have discovered that they cannot be removed except through using iTunes. Instructions that I've read say that once the device is connected to and selected from the list in iTunes, select the Photo Tab and then the folder that contains the photos etc. I never get that far because I do not have a Photo Tab to select in iTunes. How do I find this illusive tab so that I can delete these albums that are merely duplications of other pictures and are just occupying space. I need to get rid of them. Can anyone help me find the photo tab. I cannot move past that step until I do. Also, my device is not listed on the left side as stated in the instructions. It's in the bar on the upper right area of my screen and is automatically selected when connected. I am using the current version 11.1 for iTunes and IOS 7 on my iPad 3, if that helps.

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The Photo tab does not show up and no sync occurs

Trying to sync photos from iphoto to ipad and iphone. Photo tab does not show up in itunes under devices.

I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

ITunes does not show my iPhoto photos and albums in iPod Photos tab

When I connect my iPod to my Mac, iTunes displays the iPod device. However, under the Photos tab, when I select the "Sync photos from" checkbox, and select "iPhoto" from the dropdown list, the "All photos and albums" radio button below it shows "(0 photos)". Also, the "Selected albums (0 photos)" radio button is grayed out, and doesn't display any of my albums or photos in the list below.
So, basically, iTunes acts as if I don't have anything in iPhoto at all. I did an experiment, and moved my iPhoto Library out of the Pictures folder, launched iPhoto, and created a new iPhoto Library. I also added some albums and photos. These appeared in iTunes just fine! But when I moved my original iPhoto Library folder back, iTunes went back to displaying nothing.
I also tried rebuilding my iPhoto libary (launch holding down the Cmd-Opt keys, and selecting all items to rebuild. This did not fix anything in iTunes.
MacBook Pro Mac OS X (10.4.8)

George
Have you checked for non-ascii characters in your Album Names, Picture Titles or Keywords? Specifically, be wary of any characters apart from the 326 letters of the alphabet and the basic 0 - 9. !@£$%^&*() can all cause problems.
Also, have a look at this thread,
http://discussions.apple.com/thread.jspa?threadID=778068&tstart=0
About half way down there's a post from Dave E which contains the following:
Sal, I had a similar problem once. I'm sorry you had to go through so much of this but maybe what I discovered can still help you.
- View your albumdata.xml file in some text editor, like TextEdit.
- Do a Find (cmd f) for "List of Keywords"
- The XML under that looks kind of like this:
<dict>
<key>1</key>
<string>Favorite</string>
<key>6</key>
<string>Birthday</string>
<key>3</key>
</dict>
You will probably have more keywords, this is just an example. But see the format - everything that has <something> ends with </something>.
When I had the problem, the example above looked like:
<dict>
<key>1</key>
<string>Favorite <key>6</key>
<string>Birthday</string>
<key>3</key>
</dict>
Notice the line return and </string> are missing for "Favorite". This happened to one of my keywords, and I don't know what caused it, but I deleted that keyword (and the one after it) from within iPhoto's preferences, and typed them in again.
The problem went away. Maybe some bogus character got into the keywords to make the XML go bad.
Regards
TD

Update hosts file and Change proxy settings for all users on Mac

I am in a large environment with many Mac users. We have a Windows based proxy server that we are switching over within a few weeks. So far we are manually having to go to each Mac and change the proxy settings under the users account. This is a very long and painstaking process as users are on vacation etc. and our cutoff date is fast approaching for the old proxy.
we also are having to log into each workstation as administrator go into the terminal and so sudo passwd root then change the password then do sudo vi /etc/hosts to edit the hosts file.
Is there a way to change the proxy server setting for safari and firefox globally without having to log in as each user on the Mac ?
Or is there an automated way through a script that the users can run ?
These macs authenticate to active directory. They do not have a mac server but I was told to post this question here versus the desktop area.

Most browsers include an [automatic proxy configuration (PAC) mechanism|http://en.wikipedia.org/wiki/Proxy_auto-config] and the transparent configuration of proxies, and Safari and Firefox are no different here.
The usual approach here is to have folks visit a site and select the PAC file, or to push the file out. Here is a comfiguration example from [UConn|http://helpdesk.uconn.edu/trouble/proxy/autoprox.html], and another from [Rice|http://proxy.rice.edu/setup.php], and there are others around and visible via Google.
The [pactester|http://code.google.com/p/pactester> tool might be useful, too.
If y'all get some DNS entries set up (various web browsers have [Web Proxy Auto Discovery (WPAD)|http://en.wikipedia.org/wiki/WebProxy_AutodiscoveryProtocol], when last I checked [Safari needed a little help|http://www.macosxhints.com/article.php?story=20090711031033128]) and have your firewall raise an appropriate diagnostic page, you won't have to go through this again, either.
None of this stuff is particularly specific to Mac OS X or to Safari; the PAC stuff is fairly generic, and WPAD is used with various boxes. (Try Safari with WPAD, but you might still need to reference that PAC file. And if you do, using WPAD-compliant naming would probably be a reasonable approach.)
The hosts files? You're really still using those? Any chance you can get real DNS working? That's a whole lot less work, and now is the time to deploy that; if you're going to mess with everything, then you can use that effort and that requirement to (also) move forward in your networking capabilities.

When attempting synch iTunes photos tab yields spinning ball.

When synching my iPhone or iPad a spinning wheel appears when on the photos tab in iTunes. In other words, I cannot select photos to transfer from my iMac to my iPad or iPhone. The spinning wheel never goes away while on the photos tab. Other tabs work as intended and the remainder of the synch goes well. Perhaps a coincidence, but the problem appeared when I first try to synch my new iPhone 6+. My iMac is operating with Yosemite 10.10.1.

12/22/14 7:37:00.807 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65509]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:37:00.808 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:08.321 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65510]) Service exited with abnormal code: 75
12/22/14 7:37:08.321 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:10.819 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65511]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:37:10.820 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:18.334 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65512]) Service exited with abnormal code: 75
12/22/14 7:37:18.334 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:20.830 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65513]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:37:20.830 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:28.347 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65514]) Service exited with abnormal code: 75
12/22/14 7:37:28.347 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:30.836 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65515]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:37:30.837 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:32.227 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.227 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.227 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.227 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.228 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.228 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.228 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.228 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:32.228 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1857730452 for window 3109
12/22/14 7:37:38.358 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65516]) Service exited with abnormal code: 75
12/22/14 7:37:38.358 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:40.847 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65517]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:37:40.848 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:48.369 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65518]) Service exited with abnormal code: 75
12/22/14 7:37:48.369 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:50.857 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65519]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:37:50.858 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:37:58.380 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65520]) Service exited with abnormal code: 75
12/22/14 7:37:58.380 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:00.865 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65521]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:38:00.865 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:08.391 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65522]) Service exited with abnormal code: 75
12/22/14 7:38:08.391 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:10.872 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65523]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:38:10.872 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:14.870 PM WindowServer[129]: WSGetSurfaceInWindow : Invalid surface 1824165632 for window 3109
12/22/14 7:38:18.406 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65524]) Service exited with abnormal code: 75
12/22/14 7:38:18.406 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:20.879 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65525]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:38:20.879 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:28.417 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65526]) Service exited with abnormal code: 75
12/22/14 7:38:28.417 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:30.886 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65527]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.
12/22/14 7:38:30.886 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:38.430 PM com.apple.xpc.launchd[1]: (com.apple.dpd[65528]) Service exited with abnormal code: 75
12/22/14 7:38:38.430 PM com.apple.xpc.launchd[1]: (com.apple.dpd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
12/22/14 7:38:40.896 PM com.apple.xpc.launchd[1]: (com.apple.photostream-agent[65529]) LaunchServices returned a bundle URL that does not match with the LoginItem's known association.

HT1386 devices not updating after sync and changes made in itunes not happening?

Hi, I think my ITunes is corrupt and may need to be reinstalled? Changes made on the Mac in Itunes to playlist do not sync to either our 5 or 4S. other issues in Itunes I've noticed is that adding songs to playlists only works if I drag them...using the drop-down menu and 'add to' doesn't make the change occur. Any suggestions?

How is your iPod configured to sync with your iTunes library? Automatically or manually? In other words, what options do you have enabled from under the iPod's Music and Summary tabs?
Syncing music to iPod or iPhone
B-rock

I updated my account and now emails with photo attachments are being blocked

On Sunday I received something from y'all asking me to update and I did.
Now when I go to, say, Google, there is a little green icon besidethe word saying that y'all have checked it and it is safe.
More critical. my friend has tried to send photos to me every day since Sunday and they keep getting kicked back. Her inbox has been bombarded with messages that says I didn't ask for anything from her and that I am not accepting her email

Please restart the computer and try again.

Read this to find out how to add/update/delete users and change/reset passwords programmatically

WebLogic 7.0
I have read a number of questions on how to do these but not many answers, so
after figuring it all out, I thought I would post a message describing all these
tasts (It would be great if BEA would start something like 'HOW-TOs for Linux'
for WebLogic)
-1. Imports required :
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
import weblogic.management.WebLogicObjectName;
import weblogic.management.configuration.DomainMBean;
import weblogic.management.configuration.SecurityConfigurationMBean;
import weblogic.management.security.RealmMBean;
import weblogic.management.security.authentication.AuthenticationProviderMBean;
import weblogic.management.security.authentication.GroupEditorMBean;
import weblogic.management.security.authentication.UserEditorMBean;
import weblogic.management.security.authentication.UserPasswordEditorMBean;
import weblogic.security.providers.authentication.*;
0. Code to retrieve DefaultAuthenticatorMBean (this code is running inside WebLogic
server - I have it inside EJB):
DefaultAuthenticatorMBean authBean;
Context ctx = new InitialContext();
MBeanHome mbeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
//Find UserEditorMBean
DomainMBean dmb = mbeanHome.getActiveDomain();
SecurityConfigurationMBean scmb = dmb.getSecurityConfiguration();
RealmMBean rmb = scmb.findDefaultRealm();
AuthenticationProviderMBean[] providers = rmb.getAuthenticationProviders();
for (int i = 0; i < providers.length; i++) {
if (providers[i] instanceof DefaultAuthenticatorMBean) {
authBean = (DefaultAuthenticatorMBean) providers;
break;
1. Create/Drop/Update users
to perform these tasks, the user must be logged in into weblogic and be in Administrators
group. Then, the code is as follows:
create user: authBean.createUser(username, password, description);
remove user: authBean.removeUser(username);
change user's description: authBean.setUserDescription(username, newDescription);
remove user from group: authBean.removeMemberFromGroup(groupname, username);
add user to group: authBean.addMemberToGroup(groupname, username);
2. Change other users' passwords (MUST BE ADMIN TO DO THIS - by Admin I mean be
a member of Administrators group)
authBean.resetUserPassword(username, newPassword);
3. Change your own password:
this is a bit trickier, because if you are not an admin, you can't change your
own password!!!! This is a part that I personally don't understand - seems like
a screw up on BEA's part. So, to allow users to change their own passwords, you
must change security context in the middle of processing to that of Admin user
and run this function as Admin user. Although a bit ackward, it's very easy to
do. Suppose you have two EJBs - EJB A and EJB B. EJB A does normal processing
for the user and always runs in logged in user's security context. Now, suppose
you want to add a method to EJB A to change current password. The method may
look like:
public void changePassword(String logon, String oldpwd, String newpwd)
throws some exceptions
Now, there is no way to do it in EJB A, because for most users, it will run in
a 'non-admin' security context. So, to get around it, you create another
EJB - EJB B. This EJB has one method:
public void changePassword(String logon, String oldpwd, String newpwd)
throws some exceptions
and one major difference - this EJB always runs in a secrity context of admin
user. To get an EJB B running 'as admin user', all you have to do in EJB A is
the following
EJB A:
public void changePassword(String logon, String oldpwd, String newpwd)
Hashtable props = new Hashtable();
props.put(Context.SECURITY_PRINCIPAL, "wlmanager");
props.put(Context.SECURITY_CREDENTIALS, "password");
// get context that with different credentials
Context ctx = new InitialContext(props);
EJBBHome home = (EJBBHome) ctx.lookup("EJBBHome");
EJBBLocal adminEJB = home.create();
adminEJB.changePassword(logon, oldpwd, newpwd);
adminEJB.remove();
of course, this poses a problem of hardcoding user id and password for admin user
in your application - you can come up with your own ways to secure that.
THAT's IT!!! You can use the method explained in part 3 to allow non-admin users
to do pretty much everything, however for the sake of security, I would definetly
vote against it and use part 3 to ONLY allow users change their own passwords
Enjoy
Andrey

I have a similar question, I would like to edit the artwork for EACH episode in the podcast, as well as have one artwork for the entire podcast series. Any suggestions? This is a podcast that I've created -- I did the same thing for a TV Show where I was able to do custom artwork for each episode, but not one single artwork for the entire series. Does anyone have suggestions of how i should proceed?
Recap:
One image for entire Podcast Series (or TV show)
Different Set of Images for each episode in Podcast. (Understand how to do this in TV show)
Thanks!

I updated my phone and now all my photos are gone. How can I get them back?

I really need to know. They Have all my memories fo rthe past 3 years.

Well, certainly if you had 3 years of photos you have been importing them off the phone to your computer as recommended. Just synch them back.

ITunes 8.2.1 update bug (-50) and changes to iTunes Photo tab

Similar Messages

Maybe you are looking for