Itunes 8.2.23 upgrade, now won't stream music via airport express

i (mistakenly) installed yesterday's upgrade to itunes and now when i stream music to my airport express it will play a couple of songs and then i won't get any sound. the song is still "playing" in itunes but it isn't being streamed to my digital receiver. if i pause the song and start it again i'll hear it but after a bit a new song will do the same thing.
i seem to remember having this problem after the last update but can't remember what i did to remedy it. i think i reverted back to the previous version but i'm hearing that i can't do that from this version.

Hey I'm on the phone with the Apple Rep now ( who will remain nameless ) here are the steps:
1. System Prefs
2. Go into SECURITY
3. Click on FIREWALL
4. Select SET ACCESS FOR SPECIFIC SERVICES AND APPLICATIONS
5. Click the "+" Button to "Add" iTunes
6. Restart iTunes
You may need to "Add" Other Stuff that you normally use like Skype, Or Logmein.com, etc...
I believe that in the the future Apple may have a better fix for this... the rep is saying he will escalate it...
Seems to be working fine... we'll see who it goes long term and after some restarts... I'm not sure if it's because of the work we did re-installing and changing setting but I'm getting the soccer ball of death right now... be curious to see what others find out.
Message was edited by: Spitta9999
Message was edited by: Spitta9999

Similar Messages

  • ITunes 8: I can no longer connect to remote speakers via Airport Express

    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility
    I get the following error code (-3256) Apple KB research says:
    AirTunes: Error -3256 when streaming to multiple AirPort Express units 
You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic.
http://docs.info.apple.com/article.html?artnum=303157
    I followed the KB link, tried KB solution, then I sent this off to Apple.
    "Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
    My G4 PowerBook running an earlier version of iTunes connects without problem.

    I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
    This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

  • Itunes freezes when streaming music to airport express and to loewe air speaker at the same time?

    Hi,
    (first post )
    I was recently offered a Loewe Airspeaker. I already had an Airport Express connected to a hi-fi system.
    The Airport Express + hi-fi is in the living-room and the Loewe Airspeaker is in our bedroom.
    Both are connected to my network via wifi.
    I was trying to stream music from my iMac to both the Airport Express and the Loewe Airspeaker.
    When doing this, I am able to get the same tune on both devices, but iTunes systematically freezes
    =>music continues to be streamed but interface on the iMac gets the endless multicolor wheel !
    Has anyone seen anything similar before, for ex. is there a similar issue when streaming music to 2 different Airport Express?
    Any idea on where this is coming from?
    Any idea on how to prevent this?
    Thx in advance
    Rodolphe
    A few precisions on the configuration:
    the iTunes library and corresponding music are located on a Mac Mini configured as a media server.
    The iMac connects to the mac mini via wifi (shared folder). Home network is organized via an Airport Extreme.
    Both computers run Mac OS 10.7.2 Lion and are up to date.

    Well, repying to my own post... Might have found the solution: I tried to do the same with a Macbook Pro 2010 using the very same setup. And it worked perfectly! No freeze, no nothing.
    One explanation I see:
    my iMac is dating back to May 2007, a Core 2 Duo 2,16Ghz with 2 Go of RAM.
    So the computer's characteristics (or the Wifi component or the combination of all of this) might be not robust enough to allow streaming to those 2 devices...
    Anyone's got anything to add?

  • No speaker menu in iTunes for streaming music through Airport Express

    I have the following setup:
    I connect through the Internet using a Zyxel 660-R61 router acting as DHCP server. Next in line is an Airport Extreme running in bridge mode taking care of wireless Internet access. I have then added an Airport Express in client mode to the wireless network in order to stream music to my stereo. Although both Airports look "happy" (green lights) no speaker menu shows up in iTunes. I have done all types of resets etc. I suspect the problem lies in the ADSL router somehow. Anybody out there with ideas?

    I'm sure that you have done this already, but if not...
    Open the AirPort Admin Utility, located in /Applications/Utilities.
    Click Music in the toolbar, and select the Enable AirTunes checkbox.
    Enter an iTunes speaker name and password. This is the name displayed in the pop-up menu at the bottom of the iTunes window.

  • Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7.

    Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7 Ultimate

    Looks like I fixed it., thanks to another post I read.  I went into my Norton Security.  Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow"  This also fixed my error (-3212) which would not allow me to connect to the iTunes store. 

  • HT1515 i upgraded my iPhone to iOS 7 and now i can't use my music on airport express

    I no longer have an icon in my music app on my iphone that allows me to connect to my airport express now that i have downloaded ios7.
    I just found another discussion about the control center swipe.  I now am able to use my airport express.

    iOS 7 moved the AirPlay icon to Control Center.
    To show Control Center, make sure your Home screen is displayed (press the Home button once), then swipe up from the bottom.
    http://www.apple.com/ios/whats-new/#control-center
    http://www.youtube.com/watch?v=D2rn8vSzD1M

  • Play iTunes via airport express?

    Hello
    I have a couple old airport expresses with a 1/8 in output to play music received from iTunes wirelessly. BUT, AirPort utility won't recognize either airport express (I have depressed the reset button on each for 30 seconds) and I see no option for remote speakers in iTunes.
    Is there anyway to play iTunes music through airport express? Is there another way?
    Thanks
    Doug

    Is this what you are looking for? http://docs.info.apple.com/article.html?artnum=93396
    or
    http://docs.info.apple.com/article.html?artnum=108071

  • I just replaced my airport extreme and now the amber light on my airport express is flashing and so it is not being recognized.  I have been on the computer and gone to airport utility and it is simply not showing up at all.  What can I do?

    I just replaced my airport extreme and now the amber light on my airport express is blinking.  When I go to utilities and try to find the airport express it does not show up.
    What should I do?

    Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

  • HT5085 I have nearly filled my iCloud storage with pictures. If I subscribe to iTunes match, will I still be able to access music via the cloud?

    I have nearly filled my iCloud storage with pictures. If I subscribe to iTunes match, will I still be able to access music via the cloud, or will I have to buy more storage space? Cheers.

    Yes, but... you'll have to first index her music through your iTM subscription. So... you'd have to add her music into your own library first. Which.... would defeat the point of iTM I suspect in your case.

  • Streaming itunes audio via airport express to TV speakers

    Using imac, itunes and airport express.
    I am trying to utilize tv audio component to play music as remote speaker using itunes and airport express.
    With the tv on and approriate component selected - no sound. If I turn off TV and then back on - I get about 3 seconds of music via airport exp connection then silent.
    Any suggestions?

    I have connected airex to a sony mfm-ht205 lcd tv/display. I have used the airex monster cables stereo to dual-rca connectors to connect to tv.
    The tv has 2 video and 1 component set of jacks. Each of these has audio red/white right/left jacks for audio cords (presumably the dual end of monster cable).
    With tv off and airex connected, when I turn tv on I get music from itunes (via airex) on tv speakers for about 3 seconds then nothing.
    Thanks for response.

  • My Windows 7 Dell won't connect to my Airport Express

    My Windows 7 Dell won't connect to my Airport Express.  The computer sees my network on the airport. I am able to enter the network name and password. However the computer won't connect. What do I need to do?

    Try going through the following Microsoft Support article for details on troubleshooting wireless connections on Windows PCs. Please post back your results.

  • Cant stream video sound from ITunes to stereo via Airport Express

    I'm using a PC with wireless (Centrino 802.11g) with Itunes (Latest release 7.0.0.70) and for some reason the sound from Itunes video will not stream wirelessly to my stereo connected to my AirPort Express.
    When the video is embedded in an Itunes playlist of MP3s, the sound will work fine through the AirPort Express with the MP3 tracks, but will toggle over to the PC speakers for the video.
    Any ideas gratefully received?

    Airtunes actually only support MP3/AAC audio streaming from iTunes. That's too bad for video.
    The things is, even with other Airtunes streaming software, the streaming delay is such that the song will be off by a few second from the video. I guess Apple have choose to do not stream video sound until this may be resolve.
    Therefore, I'm not aware of any solution to this issue.

  • I just changed my iphone 4s and received another one as i was still under my one year warranty, and now when i play music via headphones there is a volume limit on it, i have tried to turn it off but it wont turn off someone please help

    i just changed my iphone 4s and received another one as i was still under my one year warranty, and now when i play music via headphones there is a volume limit on it, i have tried to turn it off but it wont turn off someone please help>>>

    Hi kingminjing,
    Have you checked your Control Panel to make sure you don't have the flashlight turned on?
    Swipe up from the bottom of the screen and make sure the flashlight icon (bottom left-hand corner) is not white. If it is, tap on it to turn it off.
    Cheers,
    GB

  • Apple TV and iTunes upgraded, now won't sync

    About a month ago, my Apple TV upgraded to 3.0.2, and then required me to update iTunes to 9.2.0.61. The Apple TV continues to work well with the TV. It is also connected to my wireless network and the internet, since it browses the iTunes store and YouTube, as well as connecting to internet radio stations. "About" shows the correct name for the Apple TV, as well as the proper SSID and IP address for my wireless network. BUT...
    In iTunes, the Apple TV does not show up in the menu list at the left side of the iTunes window, where you now find "Library", "Store", and the iPod, and where you could formerly find the Apple TV listed.
    In iTunes, clicking Edit/Preferences and selecting the Apple TV tab, the list actually does show the Apple TV as connected to iTunes, with the status listed as "syncing". However, the Apple TV has not successfully synced since the upgrade to 3.0.2, as all the content remains as it was before the software update.
    On the Apple TV tab, "Look for Apple TVs" is checked and "Prevent Apple TVs from syncing automatically" is unchecked.
    Any ideas?

    Similiar Issue:
    - No longer see Apple TV 1st Generation under iTunes Devices
    - No lonfer see Apple TV "tab" under iTunes Preferences
    Enviroment
    - Apple TV 1st generation
    - iMac
    Steps
    - Updated to iTunes 10.0.1
    - Opened iTunes
    - Agreed to Terms
    - AppleTV is no longer displayed in devices
    Troubleshooting
    Restarted iMac
    - no resolution
    Restarted AppleTV
    - no resolution
    Went to iTunes Preferences; Apple TV "tab" is no longer available in Preferences
    - no resolution
    Went to AppleTV > Settings > Computers and disconnected computer. Clicked Connect to iTunes and provided digits sucessfully. Closed and reopened iTunes
    - no resolution
    Note that AppleTV has AirTunes enabled but unfortunately this is not available in iTunes either at this point for streaming music
    Currently stumped.
    Thoughts?

  • Installed iTunes 7.1.1 and now won't play any CD/DVD

    help!! i installed itunes 7.1.1 and now i can't play any CD/DVD, even the data ones. what should i do?? when i run CD diagnostics it shows up like this:
    Microsoft Windows XP Professional Service Pack 2, v.2055 (Build 2600)
    System manufacturer System Product Name
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    SiS 661FX
    Connected Device Information:
    DiskDrive, ST3802110A, Bus Type ATA, Bus Address [0,0]
    CDROM, TSSTcorp CDW/DVD SH-M522C, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: TSSTcorp CDW/DVD SH-M522C, Rev TS06
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: TSSTcorp CDW/DVD SH-M522C on -128(0xffffff80) media at speed 0X.

    the motherboard is ASUS P5S800-VM
    thank you kindly.
    i find it a bit difficult to track down info for the ASUS motherboards at ASUSTek. so perhaps try using their ASUS Navigation utility to determine if there are any BIOS or chipset driver upgrades available for that model. here's a link through to their download site for the utility:
    ASUS Navigation Wizard
    if you still get the bad behavior from CD/DVD drives after doing any updates indicated at Asus, let's check on your other componentry too.
    i had a look at Samsung, and there's a newer TS07 firmware available for your SH-M522C.
    TSSTcorp SH-M522C
    is that any help?

Maybe you are looking for

  • Navigation problem in using ITS

    I have one created one module pool program for goods movement. its having 6 screens. in order to get this program in the mobile divice i have configured ITS. I have created Internet Service is se80 and in SICF. Now i am getting the first screen in th

  • Transfer Postings

    Hi Experts... I have the following requirement: My client has created a Balance Sheet GL without activating the open item management in GL Master.  And posted some documents to that GL also.  While scrutiny the problem was found.  Now i want to activ

  • List filtering prompts for credentials

    Hello All, One of our user is having a big list arrount 4976  items in it. Also  verious columns in it and when he filter this list by any column he is getting credential pop up again n again. It is happenning only in client machine not with us as we

  • Handling 2D array in the PL/SQL.

    Hi, I have been having a lot of trouble with executing a stored procedure. I'm hoping someone can help me with this: The stored proc.One of these parameters coming in is a 2D array from the Java. The data type of the 2D array is varchar. I am able to

  • How can I change sequence setting after done editing?

    I just finish editing one of my video project. Unfortunately, just found out the sequence I was working with was in wrong settings. I tried to change aspect ratio from HD1440 *1080 to HDTV 1080i (16:9). However, after I changed the setting, my footag