ITunes 8 and Windows Vista "sound effect"

So ever since iTunes 8 came out, I get that stupid annoying sound effect whenever doing anything in iTunes. I can turn off the sidebar and it will stop for the most part, but I still get it when going to the iTunes Store or going to my iPod list. I was hoping 8.0.1 would fix it, but it did not. I have searched the forums and I have disabled the TableInputService and that didn't help at all. Has anyone else found a different solution?

I have a similar problem, with my new iPod Touch crashing an XP Professional setup. It's worth noting that the Apple article also talks about potential USB conflicts with other devices on the system that might have bad drivers. They say the solution, if that is the fault, is to make sure all your USB drivers are good. I'll try that, by a process of elimination, before re-installing iTunes (as I thought I had the latest version and I don't have Vista). I'll come back here later to report the outcome.
(serious if your iPod crashed your PC - can't even charge its battery ! )

Similar Messages

  • Creative Audigy 2 and Windows Vista: Sound volume turns down when I try to turn it

    I have a strange problem with my audio in Vista. I have a Creative Audigy 2 and Creative 6700 speakers. My full system specification is below but please note I did not have this issue in my previous Vista build - its only happening since I did a reinstall. Anyway, when I swich on the speakers using the remote control unit for the 6700 speakers the sound comes on but then it turns down. I have to then increase the volume by a large amount for it to start playing sound again and then turn it down to listening volume. This issue is not application specific - it happens in everything: Winamp, WMP, games, etc etc?I'm using [color="#000000"]Creative Sound Blaster Audigy series Vista Driver 2.2.0002 and I've tried reinstall several times. I've tried doing diagnostic startup etc using msconfig in case something was conflicting and its still happening.
    Has anyone got any ideas whats going on?Many thanks for your help!?System specifications:?MSI K8N SLI (MS-785 v..0) nForce4 Rev. A3
    BIOS Phoenix Technologies 6.00PG
    AMD FX-60 with Thermalright Ultra-20 Heatsink &?Scythe?20mm fan
    Bus speed: 20MHz, Multiplier: x.0, Core Speed: 22 MHz
    Corsair 2Gb: 2x Gb PC3200 RAM 28 bit dual channel mode & T command rate (2.5-3-3-8) with Thermaltake heatsinks
    XFX 8800 GTS 640Mb XXX Edition
    Hauppauge Nova T-500 dual tuner digital TV card
    Seagate Barracuda 7200.9 500Gb
    Optiarc AD-770S SATA DVD Writer
    Xclio X2S4P4 750WModular SLi U-Quiet PSU
    Lian Li PC-A0A aluminum case
    Dell E228WFP (Two in dual display)
    Microsoft Wireless Laser Mouse 8000
    Microsoft Digital Media Pro keyboard
    Windows Vista Ultimate 32bit Edition?Message Edited by DistortedVision on 05-25-200706:4 PM

    Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    After that: test the device to see whether the issue is solved.
    2. If the issue is not solved, you should backup the device and restore it as new.
    In that case, use: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup.
    If the issue persists after restoring as new, you should offer the device for service.
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    Stijn

  • Trouble with itunes ipod and windows vista

    I just got a new computer with windows vista home premium (32bit) and i am having trouble syncing my ipod with itunes.
    when i connect the ipod it asks me if i want to scan and fix the drive, if i click continue without scanning it sometimes wont let me sync, and if it does it only gets about half my music on there before saying it is unable to write to it (unknown error 53)

    I have a similar problem, with my new iPod Touch crashing an XP Professional setup. It's worth noting that the Apple article also talks about potential USB conflicts with other devices on the system that might have bad drivers. They say the solution, if that is the fault, is to make sure all your USB drivers are good. I'll try that, by a process of elimination, before re-installing iTunes (as I thought I had the latest version and I don't have Vista). I'll come back here later to report the outcome.
    (serious if your iPod crashed your PC - can't even charge its battery ! )

  • IPod Touch gives BSOD with iTunes 8 and Windows Vista

    For almost a year I have used my iPod Touch (v1.1.3) and Nano with Windows Vista and iTunes almost perfectly. This was until last week when I upgraded to v8.
    Now iTunes still works well with the Nano but i get the BSOD when I try and plug in the Touch. I have never had the BSOD with Vista until now.
    I have read that alot of other people are having a similar problem. Is there a fix to this? New driver?
    Please tell me Apple are aware of this problem and generating a fix if its not already done.
    many thanks

    I have a similar problem, with my new iPod Touch crashing an XP Professional setup. It's worth noting that the Apple article also talks about potential USB conflicts with other devices on the system that might have bad drivers. They say the solution, if that is the fault, is to make sure all your USB drivers are good. I'll try that, by a process of elimination, before re-installing iTunes (as I thought I had the latest version and I don't have Vista). I'll come back here later to report the outcome.
    (serious if your iPod crashed your PC - can't even charge its battery ! )

  • ITunes, Shuffle and Windows Vista

    Microsoft is releasing Windows Vista in January. Are there any plans for the iTunes software/IPOD firmware to be upgraded to be compatible with Windows Vista?!? I've found that the IPOD Shuffle Reset utility does not install on Windows Vista. ITunes works, and sees IPOD/Shuffle, however get error 1418 almost always, iTunes locks up, can't transfer songs to shuffle, get error" can't read/write"...or AutoFill. I've found that if I use the reset utility on a Windows XP machine (have to do this twice)...then plug it into the Windows Vista machine, If I select "allow iTunes to automatically add songs to the IPOD" it works. But, can't delete songs from IPOD or add any new ones manually. I'm a developer, so this is a full release version of Windows Vista. Just curious, what the plans are to bring iTunes/IPOD in line with the Windows release, and if there is anything that I can do now to remedy this.

    Oh, so the iPad DOES work fine connected to the same computer and the same port.  I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
    NOTE:  When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle.  So not seeing it in Windows Explorer may not be a problem.
    Is this shuffle a new purchase... so it did not previously work for you on this computer?  If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack.  The fit can be tighter than expected, and it may seem connected, but is not.  For a surprising number of people, this was the problem.
    In iTunes, is the sidebar (along left side of window) visible.  If it is hidden, from the iTunes menu bar, under View, select Show Sidebar.  When there are no devices connected, the heading DEVICES should not appear in the sidebar.  When you connect your iPad, DEVICES should appear, with the iPad listed below.  If you connect the shuffle, it is be added to the list under DEVICES.  To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
    When you connect the shuffle, does its light on the shuffle do anything?

  • Error 1202 with iTunes Store and Windows Vista

    When I try to redeem music on iTunes Store, or access my account, etc. I receive "We could not complete your iTunes Store request. An unknown error occurred (-1202).
    I have read many similar posts and tried many fixes (checked time/date on my computer, made sure LAN proxy settings is unchecked, turned off my Norton firewall, tried to access iTunes Store in safe mode, etc.). None of these worked. Please help as we would like to purchase music from the iTunes store and have done so successfully in the past on this computer.

    This problem is related to having your computer, Apple device, etc
    (from your current physical location) being unable to resolve/connect to
    the following site/domain names and their related IP address(s).
    The following table is presented to help explain/clarify this issue:
    Site/Domain name | IP Address
    phobos.apple.com | 17.250.237.43
    deimos3.apple.com | 206.169.246.144
    albert.apple.com | 17.149.240.64
    gs.apple.com | 17.151.36.30
    itunes.apple.com | 206.169.246.171
    ax.itunes.apple.com | 206.169.246.139
    If ANY of these sites/IP address are unresolvable (via PING for example)
    then the ability/usability of Apple's iTunes (and the Store) will suffer.
    To have yourself verify that (if) you can connect to these sites, you'll
    need to open up a MSDOS/Command prompt window
    and then type "ping" (without the quotes) and one of the (above) listed sites.
    For example you would type the following at your command prompt:
    ping phobos.apple.com (then press the return/enter key)
    which (should) give you results like this:
    pinging phobos.apple.com.akadns.net http://17.250.237.43 with 32 bytes of data:
    Note: Anyt response other than "reply" (like Request timed out)
    indicates a problem resolving the site's name to an IP address
    and (generally) has NOTHING to do with your (normally functioning) computer
    as this is dependent on the ISP (Internet Service Provider) that you are
    using to connect to the Internet (like Sprint, Insightbb, etc) with.
    The 'key' here is that it's the ISP's responsibility to (properly) resolve
    the site's name to (one or more of) Apple's sites.
    If (however) Apple (itself) is (currently) experiencing a DDOS attack
    (Distributed Denial Of Service) upon one (or more) of it's sites, then THAT
    would explain a possible cause of the problem.
    However I stress THAT is NOT the problem since I can connect from my Insightbb
    (ISP provider) at home but (currently) can not connect at work via their ISP.
    This is (also) WHY the "tag" of the FQDNSN (Fully-Qualified DNS Name)
    is listed as http://akadns.net since that is the ISP/Router resolving the DNS name!
    I hope that this has helped shed some light as to WHo's problem this REALLY is,
    and will help to stop the Apple-User 'finger-pointing' game in it's tracks!
    Your's The Lan_Man!
    William Cull
    Technology Specialist
    University of Louisville

  • ITunes iPhone and Windows Vista - Syncing Issue

    I was trying to upload 2 new albums I have and it seems it re-synced my whole music library to my iphone.
    Is there a video or something I can watch that shows how to use iTunes correctly, and to sync new songs without having to re-sync the whole entire library to my iPhone.
    Thanks.
    Black MacBook, 2.0GHz Core Duo, 1GB Ram, 80GB, Superdrive   Mac OS X (10.4.10)   8GB iPhone

    There really isnt much to syncing music. I have read several posts of folks complaining that making a simple change to one song caused the entire library to resync.
    Suggestion - turn off automatic syncing when you plug your iPhone. Then choose Sync only selected items, and then select all your music. Sync. Then make a change to one song and manually sync again. See if only that one song syncs.

  • Is there a fix for the incompatibility between itunes and Windows Vista?

    I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

    Hey Don,
    What exactly happens after you install iTunes? Do you see an error message?
    This article describes device filter issues that can be caused by application conflicts:
    http://docs.info.apple.com/article.html?artnum=305422
    Jason

  • My pc windows vista home system and Windows Vista Ultimate both service pack 2 and itunes do not recognize the ipod touch 4g, ios 5

    my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'

    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
    How to enable iTunes in the Windows XP Firewall
    EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
    How to enable iTunes in the Windows Vista and Windows 7 Firewall
    Message was edited by: b noir

  • I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured.  Using itunes 10.5.2.11 and Windows Vista 64

    I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred.  Using itunes 10.5.2.11 and Windows Vista 64.  Any help?  Thanks in advance!

    I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

  • Recently downloaded iTunes on my windows Vista PC and its incomplete.

    Recently downloaded iTunes on my windows Vista PC everything comes up on the screen except there is no Edit, View, Controls etc., no tabs for Music, Movies, TV Shows etc., no viewing for their sub-categories in the drop down, no three lights in the upper left corner and I cannot type in the search box.  What's missing or wrong with this download?  Really hard to make a purchase.

    Hi ...thanks for trying to help.
    When I plug my ipod in via USB it attempts to find and install the driver software.  It always fails and I get the message "Windows encountered a problem installing the driver software for your device.  Windows found driver softtware for your device but encountered an error while attempting to install it - Apple mobile device USB driver.  The I/O operation has been aborted because of either a thread exit or an application request"

  • I tried downlaoding itunes on my Windows Vista and after it completes, the icon doesn't appear on my desktop. The itunes setup can be found just not the actual program.

    I tried downloading itunes on my Windows Vista and after it completes, the icon doesn't appear on my desktop. When I search for the itunes under my programs, this is what shows: iTunes64Setup.

    It did prompt me to run it. I apologize. I said save.
    This is what happens, I run the iTunes64Setup, it downlods, says it has completed and then I click finish on the iTunes installer. After that, nothing comes up. Usually the program will start after it installs. There isn't an icon on my desktop either. When I go and search for iTunes under programs, only the iTunes64Setup appears. I am also having trouble downloading Adope Photoshop as well.

  • Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Hi,
    got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
    Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes.

  • Audigy 2zs Gamer and Windows Vista / Windows 7

    .Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
    Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
    When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
    I know this is an older card but any help would be appreciated!?
    Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
    68.95.29.2

    One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
    But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
    The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

Maybe you are looking for

  • Can you family share between apple id's from two different countries?

    Hey, Can you link an Apple ID from one country, create it as the organiser for that family, and then add a family member to that family who has an apple id from another country. For example, make the Australian account the organiser then add an ameri

  • My Computer is not reconizing the IPod Touch....

    I am all excited to use this thing and bamn I get a big error something like Iphone needs windows XP or Vista to run except I have Windows Vista. I tried it on my Sisters 32 bit XP and the SAME error message. Anyone know how to fix this?

  • Sent mail is not being deleted on iPad.

    I read a support page that said it should automatically delete sent messages based on the setting for how many messages to display, after a time delay, but it is set to 20 yet I had 500 messages in a sent mail folder (pop account) dating back to earl

  • Creating custom ui:repeat

    Hi, is it possible for us to build custom loop tag as in JSTL c:forEach begin="" end="" I built the custom <ct:if > as in JSTL and custom functions but am not able to know how to build this type of tag. Please help.

  • Batch input session for Recurring Entry

    Hello All, i have created Batch input session for Posting document's for recurring entries creted and job executed in background through SM35 and done successfully, but i am unable to find the Batch input session in SM35 which i have created to run t