ITunes 8 launch issues

_Hello everyone!_
i'd installed the new version of itunes (8) yesterday, and ever since i just cant open it!
it's not like it is writing me an error or something-
it's just that i double-click itunes and nothing happens but i can see in the application manager that itunes does work, but i can't see or actually launch it.
p.s
i have this problem is only with itunes 8
thanks!

Do you mean that whey you try to launch iTunes, it doesn't launch but there is no error message, but when you look on the processes tab in Task Manager you can see iTunes.exe in the task manager.
If this is it first try this:
http://support.apple.com/kb/TS1776?viewlocale=en_US
I have given the XP version, but there is a link to the Vista version on the page. You did not give your operating system.
If that doesn't work, the most common thing is a problem with cryptographic dlls. Before checking them it is important to be sure your system is from malware as this can cause the problem and interfere with a solution.
Run a scan with up to date definitions, there is an on line scan you can do at Kaspersky:
http://www.kaspersky.com/virusscanner
It is good at detecting problems but unfortunately the free scan doesn't remove them.
Beware of searching the internet for malware removal software, much of it installs malware, stick only to the big names.
Next try working carefully though *method 4* in this article:
http://support.microsoft.com/kb/822798
Make a note of any error messages, and post back with the names of any files mentioned. This is important.
If there are no error messages try starting iTunes.

Similar Messages

  • Itune launch issue-Apple Application Support not found

    I did some serious cleaning on my computer yesterday and may have accidentally removed a program that is needed to open Itunes. When I click to open Itunes, I get an error message stating that Apple Application Support was not found. I have tried to re-install itunes and that has not worked. If I completely remove Itunes, will I lose all my music??

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunes installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Itunes launch issue

    itunes stopped working.... i've tried everything the support page says and it's not working. every time i try to open i tunes the message "the itunes application could not be opened. the required folder could not be found." pops up. the guest file opens itunes perfectly fine, it even pops right up without anyone opening it up. i've checked the music through quicktime and it's all playing fine so far.... i'm getting extremely frustrated.... can someone help me please?

    Okay. We're into exotica and experimental troubleshooting territory then. If you're game, there's one thing that I think might be worth a try.
    In the past I've sometimes seen that message indicate trouble with an iTunes preferences folder. It can't be a standard sort of preferences problem here, because we've already tried rebuilding those.
    However, nowadays there are some other iTunes preferences files lurking in each different user account. There's an iTunes.exe.plist file and a com.Apple.iTunes.plist file. They live in a "Preferences" folder in your \Roaming\ preferences (along with a Safari preferences file, if you have Safari installed, and a PubSub plist and keychain plist. So perhaps that's the folder iTunes can't see. If that's the case, rebuilding that folder might help.
    So, (in your usual user account) head back to:
    C:\Users\username\AppData\Roaming\Apple Computer\
    Rename the "Preferences" folder PreferencesOLD. (Don't delete it.)
    Try launching iTunes again. Does it launch properly this time?

  • Itune launch issues

    Hi, I hope some one can help
    I just bought 1st ipod. Have down loaded itunes, but it will not launch. It is telling me that the default folder shud be in 'my music' and that it cant be found. Having checked the folder everything seem present and correct.
    alternatively can anyone tell me is it possible to sync an ipod with window media player 11... Can't seem to get that to work either.
    Here's hoping

    Perhaps this Apple KnowledgeBase article will help:
    iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    Hope that helps.
    can anyone tell me is it possible to sync an ipod with window media player 11.
    Sorry, but you can't. WMP only works with players that use Microsoft's software and formats or are otherwise specifically designed to work with WMP.

  • TS1717 iTunes will not start on my PC, I have been through all the suggested "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" to no avail.  Please help

    I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"  I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy.  There are 5 Ipod devices in the house and we deperatly need to get this fixed.
    Any help would be greatly appreciated
    Robert

    Refer to following articles to remove SC file(s):
    Win 7/Vista http://support.apple.com/kb/TS2363
    WinXP http://support.apple.com/kb/TS1776
    Then proceed to repair your Quicktime:
    Control Panel >
    Win7/Vista - Programs n Features.
    WinXP - Add n Remove Programs
    Hightlight QUICKTIME and click CHANGE then REPAIR.

  • Itunes persistent silent launch issues

    The problem I have is when I double click on itunes and the computer thinks for a few seconds and then nothing happens, no error message. When I check the task manager itunes.exe is running under processes, no abnormal CPU usage. I have been having this issue for about 6-8 weeks now.
    In that time I made no system changes, I have been using SP 3 for about 3-4 months now. I have tried uninstalling itunes, quicktime, apple mobile device support, apple software update, bonjour, and mobile me preferences using the add/remove programs. I also followed the instructions on the apple support website for uninstall and file removal as suggested on different post as well. I have run multiple virus scans and spyware scans using avast home edition 4.8 and spybot S & D being sure to update the virus definitions prior to each scan. I ran registry cleaner (ccleaner) to fix any registry issues. I have checked to make sure my smart card is running (per previously read posts) and it is set on manual. I had deleted the sidb file with no success as well. I also created a new user account and tried installing and running itunes there with the same problem. (this is not necessarily the order in which i performed these fixes if that makes a difference) If anyone has any suggestions for additional ideas I am open to trying anything. I am at my wits end here. Thank your time and responses. Vinnie

    A couple of simple things to try:
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    I did this with no changes.
    Stop the bonjour service, this FAQ has instructions:
    http://support.apple.com/kb/HT2250?viewlocale=en_US
    I could not get Bonjour to disable so I uninstalled it. Do I need to reinstall?
    Start>>Run>>Services.msc
    you should find the smart card service in the list. Report back with your findings.
    It is set on Manual.
    Malware can interfere with cryptographic services and also prevent a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
    Ran a virus scan with Avast home 4.8 with no viruses found and spy scan with spybot search and destroy with no changes to itunes launch.
    Then work through *Method 4* in the following link:
    http://support.microsoft.com/kb/822798
    When I was going through Method 4 I got this message "LoadLibrary("mssip32.dll")failed - The specified module could not be found" I got this message on both the "regsvr32 /u mssip32.dll" and the "regsvr32 mssip32.dll" commands.
    I have not tried to restart itunes again. I figured I wait to see what to do next. What do you think? Vinnie

  • ITunes 7.7 Launch Issue

    Hi,
    I had a working iTunes 7.6 installation on 32-bit Vista.
    I've installed iTunes 7.7, which installed no problem and displayed the licence agreement screen to me. I then clicked 'Agree' and it went away.
    I can see it running in my task manager, however see no GUI.
    Rebooting the PC, 'fixing' the installation, uninstalling and reinstalling haven't helped.
    I click the iTunes icon, it shows me the progress bar 'Loading iTunes Library', and then the progress window vanishes and I see no iTunes. It is, however, running in my task manager.
    Does anyone have any suggestions?
    Many thanks

    Let's check to see first if this is a systemwide issue or if it is specific to a single user account.
    Try creating a new user account (With full administrative rights) as per the instructions in the following document:
    iTunes for Windows Vista: Troubleshooting unexpected quits, freezes, or launch issues
    Now log out of the old user account and log into the new one.
    Try launching iTunes in the new account. Does an (empty) library screen eventually come up, or do you get the same kind of behavior as you do with the the usual user account?

  • Itunes 10.1.1 for Windows 64 bit launching issue

    Trying a clean install of itunes on Windows 7 64 bit machine. It downloads and seems to install okay. Launch program and it looks like nothing happens. Check running services and it appears there. Tried uninstalling, removing and re-installing everything per Apple support and same thing. Quicktime launches fine. Installed and running on account with Administrator privileges. Wanted to give this laptop to my daughter all ready to go for Christmas. Any ideas would be really appreciated. TIA

    Launch program and it looks like nothing happens. Check running services and it appears there. Tried uninstalling, removing and re-installing everything per Apple support and same thing. Quicktime launches fine.
    Excellent info thanks, julie. That's ruled out a bunch of things already.
    Checking now on one further common cause of error-message-free itunes launch failures in recent times.
    Try (by way of experiment) disabling the BonJour Service.
    In your Start Menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Maximise the window to better see what's going on.)
    Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
    Restart the PC, and try launching iTunes again. Does it launch this time?
    If iTunes launches with the BonJour Service disabled, by any chance do you have a recent version of IOBit's Advanced SystemCare utility currently installed on the PC? If so, try uninstalling and reinstalling Advanced SystemCare. Can you launch iTunes without having to disable the BonJour Service now?

  • TS3430 I am having iTunes CTD issues

    When I open iTunes it crashes to desktop.  A previous work around was for me to make a new playlist and then delete it.  That now does not work.  I am able to open iTunes in safe mode and it functions normally.  I followed the directions about examining any third party plug-ins but none were found - I am set up to see hidden files as well.  Quicktime is updated and runs with no issue.  Windows 7 Ultimate 64 bit.  Here is the error message I received today:
    Faulting application name: iTunes.exe, version: 11.3.1.2, time stamp: 0x53dc1f90
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x00000008
    Faulting process id: 0x644
    Faulting application start time: 0x01cfbe21cf282204
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: unknown
    Report Id: 13cbfb0a-2a15-11e4-949f-2cd05ad21f51
    iTunes.exe
    11.3.1.2
    53dc1f90
    unknown
    0.0.0.0
    00000000
    c0000005
    00000008
    644
    01cfbe21cf282204
    C:\Program Files (x86)\iTunes\iTunes.exe
    unknown
    13cbfb0a-2a15-11e4-949f-2cd05ad21f51

    Hey there sragsd0416,
    It sounds like you are unable to open iTunes unless its in Safe Mode. You started exactly where I would have started as well, by looking for 3rd party plugins. Use this article for additional troubleshooting steps and if needed, instructions to remove and reinstall iTunes, or create a new library as the case may be:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Itunes launches fine however I cannot connect to the Itunes store.  It says that Itunes has stopped working and windows is looking for a solution.

    Everything seems fine until I try to access the ITunes store.  Then I get a message that ITunes has stopped working and that Windows is looking for a solution.  Then it tells me that no solution has been found and closes down Itunes.
    I can still sync music / podcasts to my ipod and iphone.  I am still getting podcast downloads automatically for the ones I have subscribed to.
    This is the first time this issue with not being able to access the Itune stores has happened to me.  I was just there 2 nights ago.

    Hello notime4,
    The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • HT1222 "Data Execution Prevention" not letting ITunes launch. How do I remove DEP?

    How do I get rid of Data Execution Prevention!!!??? All of a sudden this annoying little program wont allow me to open Itunes!! I tried turning it off the way they said to but it still blocks itunes. I even reinstalled Itunes No luck  I still cant use Itunes  HELP!!!

    And no problem for "barging in"; your expertise in solving Windows issues is always welcome. Cheers.
    Thank you.
    The situation with these changed up a bit with the introduction of the iTunes 10.5.x versions and above. (A "new problem wearing old trousers" event.) I have a note in the Full Host Bar about it, though it's speculative. Here's the content of the post there:
    There's various possible causes for DEP errors when launching iTunes for Windows. But in recent times we've been able to get past a number of them by updating folk's QuickTime Player to the latest version. For example:
    Re: When I tried to update to 10.6.3 it failed
    The interesting thing about that is that since iTunes for Windows 10.5.x, you aren't supposed to need QuickTime for Windows componentry to be installed in order for iTunes for Windows to launch. So it's not likely that the DEP errors are being caused purely by the lack of QuickTime componentry on the PCs in question (or by the lack of new-enough versions of QuickTime componentry on the PCs in question).
    One putative mechanism for what's going on.
    I've noticed (in the course of other experimentation) that if the QuickTime Player is uninstalled on an XP system and iTunes for Windows (some version post 10.5.x) is launching, I can get a message saying that certain kinds of content can't be played because QuickTime isn't installed.
    So there's a task performed by iTfW when launched to check on the presence of certain types of QTfW componentry. If the answer is "that componentry is not present", a routine is run that shows the dialog saying that certain content can't be played.
    It's plausible that Data Execution Prevention is interpreting the routine that produces the dialog as being a malicious act on some systems, and throwing the DEP error when the routine is run.
    That would explain why updating (or possibly installing) the latest version of the QuickTime Player is getting people past the DEP errors. The check for QTfW componentry is run when itunes launches, but it determines that the componentry is present. So the routine that produces the dialog isn't run, and Data Execution Prevention doesn't feel compelled to throw the DEP error.

  • Itunes update issue

    I updated iTunes but receive the following message: AVCFPlayerItemDurationChangedNotofication...  Now iTunes will not run.  I even tried the repair option on the iTunes download website.  Any suggestions?

    Does this happen if you start iTunes in safe mode, hold Shift and Control while launching it?
    Take a look at this Apple document -> iTunes: Troubleshooting issues with third-party iTunes plug-ins
    You may have to remove a plug-in from C:\Documents and Settings\username\Application Data\Apple Computer\iTunes\iTunes Plug-ins\

  • Mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit

    mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit in the Activities Monitor.  When I quit or go into the Activities monitor and try to quit, it goes off, briefly, then immediately relaunches.  If i turn the computer off, and then on, iTunes launches automatically.  ITunes 10.4.  The only thing I remember doing different, lately, is I just updated a couple of days ago.  Has anyone else had this issue?  Thanks!

    Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • IPhone-iTunes Syncing Issues  (3G Phone w/ 2.2 Firmware & iTunes 9.0.1)

    Please feel free to inform me if this inquiry might be better posted in a different section of the discussion forums.
    *iPhone-iTunes Syncing Issues*
    (3G Phone w/ 2.2 Firmware & iTunes 9.0.1.8 running on a Dell PC w/ Windows XP Pro Operating System)
    With the newest 9.0.1 version of iTunes...
    When you synch your Windows XP Pro PC with your iPhone (3G) device & instruct the software to synchronize your iPhone Safari "Bookmarks" with your PC's Internet Explorer "Favorites," should there not be a bi-directional transfer of the information?
    (from iPhone to PC and also from PC to iPhone?)
    I synched my phone yesterday & it appears that there was a successful transfer of Internet Explorer "Favorites" into the iPhone. However, neither were my iPhone Safari "Bookmarks" retained on the iPhone nor were they transferred over to the PC (& into Internet Explorer).
    Do I need to also install Safari on the PC to get a successful bi-directional transfer? OR am I simply not looking in the correct place on the computer to retrieve all the Bookmarks that were apparently removed from the iPhone?
    Furthermore, I've been experiencing difficulty with getting PodCasts that are already sitting in my iTunes account to transfer over to the iPhone 3G.
    When I launch the synch operation, commonly the iTunes progress meter will seemingly go to completion. However, the iPhone will ultimately disappear from the left-side iTunes windowpane & the actual iPhone screen will continue to state: "Sync in Progress." The iPhone will remain in this state for HOURS & HOURS, until I ultimately slide the button to cancel the operation. I have literally left the iPhone connected to the synch computer while the iPhone's "Sync in Progress" status message remained the same for *17+ HOURS. This can not be normal*.
    Any insight would be helpful.

    Note: I resolved the issue by uninstalling and reinstalling itunes with this procedure;-)
    http://support.apple.com/kb/HT1224?viewlocale=en_US

  • ITunes Launch Failed When trying to authorize Disney Digital Copy

    I recently bought two older Disney Movies Tangled and Up that used the old disc based method for authorizing a digital copy.  On both movies, after selecting the itunes option, i recieve the error below:
    iTunes Launch Failed.
    Your iTunes software is either out
    of date, not currently installed in your computer, or does not meet the minimum
    system requirements. Click
    here to download the latest version of iTunes. If you experience problems
    with the iTunes software, please contact Apple support at http://www.apple.com/support/itunes.
    This seems to be related to the new iTunes version 12.1.1 since this disc based authentication worked on ver 11 and 10 for me on the same computer.  I have tried on multiple machines all running the 12.1.1 version with the same results (dont have any with the old version )
    The are all running windows 7 64 bit.  I attempted to redeem using the option in itunes directly and digitalcopyplus but it states i must authenticate with the disc.

    I tried extracting the DVD contents and editing the xml to remove the version number but to no avail.  I am in the right place to get an answer for this issue?

  • ITunes launches by itself and won't quit

    Re-posting this b/c I got no responses, havn't found an answer in the forums, and am still experiencing the problem.
    My system is an imac running 10.5.6 and itunes8.
    recently itunes launched for no apparent reason. we haven't used it in months. when i quit, even force quit, it immediately relaunches.
    we have not installed any itunes related widgets.
    on restart, itunes launched itself approximately an hour later, and will not quit.
    i saw issues with a process called "genredetection" but that is not running per Activity Monitor.
    Anyone else have this issue or know the cause?
    Thanks!

    I might have solved this problem on my newly setup Snow Leopard system -- didn't have it on my old Tiger system.
    I have multiple accounts setup. My day-to-day account is non-admin. Checked Login Items - no iTunes Helper.
    However, one admin account had iTunes Helper setup as a login item. I removed it.
    iTunes no longer launches by itself. Yay!
    Note that Fast User Switching is turned off, so I can't see any way this would fix the problem, but it stopped, and I'm

Maybe you are looking for

  • Can I backup to cloud from Mac osx 10.6.8 3.06 Ghz Intel Core Duo?

    Hi, My wife has recently bought a new iPad and is backing up in the Cloud. Can I do the same and if so how do I do it?

  • Parallelism in a multi-level workflow

    This is going to be a very specific use case so some background first. We have an orchestrator environment set up with 1 management server and 4 runbook servers. The management server and 2 of the runbook servers live inside the main domain, the othe

  • Balance Dimensions

    Hi, We are impelmenting HRMS&Payroll Rel1.02. This is not UK or US install. It is a Global Install 1. The Pay advice Report does not show up the Deductions. The Earnings and Total Pay comes up. How do we get the Deductions on the Pay Advice 2. How do

  • If-Modified-Since HTTP Header

    Does anyone know if BC supports the if-modified-since http header? If it doesn't - how to add it to a BC webpage? In google guideline for SEo it states: Make sure your web server supports the If-Modified-Since HTTP header. This feature allows your we

  • Imovie 10.0.4 does not work on network account

    iMovie 10.0.4 works perfectly on local account but when logon with network account iMovie does not work.