Itunes 9.0 not installing need help!!?

hello ive been trying to install the new itunes 9.0 for the past 2 days upgrading from 8.2 and it installs to computing space requirements then i get a message 'could not access network location %APPDATA%.I even uninstalled the current itunes and trying again no use. Im using windows vista 64 bit.Please someone tell me how to solve this problem!!!!

well by my experience the problem lies in your registry keys, its the same with me the best way to solve the problem is to either format ur computer after a back up or doin a registry scanner and recovery eg regcure.Or if u find the registry key thats missing and adding it ur self which is kind of risky.....can u install any other program concluding itunes, coz my problem is i cant install any program i try to install

Similar Messages

Help not installed; need help...

When I hit F1 in DreamweaverCS3/Mac, I get the message "The
help system
cannot be launched because the help folder is missing. Please
install the
help folder or reinstall Dreamweaver."
Anyone know how to install the help system? Or, why it's not
installed?
I tried reinstalling Dreamweaver (I have CS3/Web) and got an
error message
that "Please install Adobe Extendscript Toolkit2 to continue
installation."
What the heck is that and where is it???
Thanks...

Well, I installed everything, as far as I know. I'm not sure
what all was
-supposed- to be installed. But, I've noticed that Bridge has
been unable to
update itself.
I'll follow your link and try their suggestion.
Thanks
On 8/20/07 7:08 PM, in article
fadhf3$9it$[email protected], "Katsuey"
<[email protected]> wrote:
>
>> When I hit F1 in DreamweaverCS3/Mac, I get the
message "The help system
>> cannot be launched because the help folder is
missing. Please install the
>> help folder or reinstall Dreamweaver."
>>
>> Anyone know how to install the help system? Or, why
it's not installed?
>
> The new CS3 installs a lot of other stuff (like the
Adobe viewer), have
> you made sure these were installed?
>
>> I tried reinstalling Dreamweaver (I have CS3/Web)
and got an error message
>> that "Please install Adobe Extendscript Toolkit2 to
continue
>> installation."
>> What the heck is that and where is it???
>
>
http://www.adobe.com/devnet/bridge/pdfs/extendscript_toolkit_readme.pdf
> It should have come with your download.
> Also see:
http://rss.adobe.com/www/support/recent/recent_acs.xml
>
>

Error message iTunes Application Support not downloading need help!!!

Tried upgrading to iTunes 9.2 to get the OS4 update for my ipod touch and when i install it everything downloads normally except Application Support it tries to install then shows this message:
An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,version=”8.0.50727.4053”,type=”win32” ,publicKeyToken=”1fc8b3b9a1e18e3b”,process or Architecture=”x86””. Please refer to help and Support for more information. HRESULT:0x8007007E
iTunes can't work without it and I tried the WinRAR solution could really use some help

I'm also having the same error code when trying to install a update for windows update and when I try to install windows vista service pack 2 (8007007E) if that could help anyone figure this out

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)" I have installed the latest version of iTunes but still get this message. Can anyone help.

When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?

Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M.

Need Help with boot camp install, keep getting message can not install need

Hi Folks,
I keep getting a message that the boot camp assistant can not install needs firmware update. All updates are currently installed. I have tried all available updates and hey ell me the computer doesn't need them????
Any help that you may provide is greatly appreciated.
Jack
P.S. The computer is an Imac early 2006 1.83 gb.
Machine Name: iMac
Machine Model: iMac4,1
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 1.83 GHz
L2 Cache (shared): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0039.B00
Serial Number: W86220MSU2N
SMC Version: 1.1f5

You do not have the firmware update installed. You only have the SMC firmware update. Boot Camp requires this firmware update.

Help! Having a problem exporting - iBooks Author tells me iTunes Producer is not installed, but it is... How do I fix this???

Hi,
I have finished a book, go through the "publish" process, it starts the export, but at the end gives me a warning message that iTunes Producer is not installed on my Mac, but it is, window open, logged in and all. The error message refers me to the iTunes page to download it, and that's that. I can't import the iBook file into the Producer (guess its not the right type of file).
I'm stuck! Help!
thanks
P

OsX Mountain lion 10.8.5, ibooks author 2.0 and producer 3.0
thx
P

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Required Itunes component is not installed -42404

My system is Windows 7 64bit. After the iTunes update to 10.3, iTunes is now unusable, will not reconize my iphone.
Get the following messages
Required iTunes component is not installed -42404
Could not purchase required iTunes compoenet is not installed.
I got a message that my IPhone was not reconnized also and that I needed to re-set to factory default which I did, but now I lost all the apps on the iphone and I can not reinstall iTunes without receiving these error messages. No problems with Itunes until this new update.
I have followed the suggestions to completeley uninstall iTunes and all the components including QuickTIme and MobileME.   I have done this 3 times now. The last error message was regarding iTunes Helper.
Really frustrating as I can not install Itunes so that I can reinstall my apps and music on my iPhone. Any help would be greatly apprecaited.

Hi, I've had exactly the same issue as the chap who first posted. Don't really want to have to re-install iTunes and lose all the stuff/iPhone backups I've got on there. I've rune the diagnostics as mentioned; please see below:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
INTELR AWRDACPI
iTunes 10.4.0.80
QuickTime 7.6.9
Apple Application Support 1.5.2
iPod Updater Library [Error:0000000D]
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0012ACB80A0DBBB8
Current user is an administrator.
The current local date and time is 2011-08-16 21:28:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 6800
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d5b1c7246190ab8289f67d3e590bcbb3
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {711D230C-2B09-4DF9-B298-0F8A66D46DD0}
Description:          NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter - Packet Scheduler Miniport
IP Address:          192.168.1.66
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.254
DHCP Enabled:          Yes
DHCP Server:          192.168.1.254
Lease Obtained:          Tue Aug 16 21:22:10 2011
Lease Expires:          Wed Aug 17 21:22:10 2011
DNS Servers:          192.168.1.254
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-08-16 21:24:16.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0), Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp CD/DVDW TS-H552U, Rev US06
Audio CD in drive.
Found 12 songs on CD, playing time 51:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:44:68
Track 3, start time 07:07:08
Track 4, start time 11:12:72
Track 5, start time 15:30:35
Track 6, start time 20:39:22
Track 7, start time 25:50:40
Track 8, start time 28:54:65
Track 9, start time 33:01:69
Track 10, start time 38:22:40
Track 11, start time 41:58:62
Track 12, start time 45:58:43
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   40.
The drive CDRW speeds are:   40.
The drive DVDR speeds are:   40.
The drive DVDRW speeds are:   40.
**** Device Connectivity Tests ****
iPodService 10.4.0.80 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 4.3.3
Serial Number:          86*********
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
Any help much appreciated!

TS2830 OW TO SOLVE: REQUIRED ITUNES COMPONENT IS NOT INSTALLED (-42404)

At time of starting my computer i found no icon for itunes on the desktop (although it was installed). reactivated from the search program it gave me the following message: a rquired itunes component is not installed (-42404). I've re installed itunes but message never been removed. When I've connected my iphone 4s I've got another message that itunes could not connect with my iphone and need to restore it to factory setting.????!!!!!!!!!!! help is highly appreciated.

If you're using Windows you may have to uninstall iTunes first:
Overview
In some rare instances, it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Follow the instructions here: http://support.apple.com/kb/HT1923

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

TS1717 a required itunes component is not installed.(-42404)

Hi There..I updated my itunes (running on Windows 7) to the latest version(11.0.3) then whenever i open it it gives me an error message saying that a required itunes component is not installed(-42404). Also can't sync my iphone anymore. I've tryed repairing but still the same problem exists..HELP PLEASE

Sometimes this one indicates that your FairPlay is broken, but other components might be dodgy.
Let's try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does that help with your 42404?

A required iTunes component is not installed 42404 with iTunes 10 after update

Hi,
So I updated last night to the latest iTunes and now whenever I start the program I get this error:
A required iTunes component is not installed... - 42404...
I've tried uninstalling and deleting the iTunes preferences but it keeps on popping up. I can't sync my iPhone with it like this. Should I reinstall the Mobile Device stuff?
Thanks

Sometimes this one indicates that your FairPlay is broken, but other components might be dodgy.
Let's try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does that help with your 42404?

I recently downloaded the latest iTunes and now keep getting the error message "A required iTunes compnent is not installed. Please re-install iTunes (-42404). I have re-installed 10x and still no luck. iTunes will not sync with my iPad. Can anyone hel

I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

Itunes 9.0 not installing need help!!?

Similar Messages

Maybe you are looking for