ITunes 9.2.1 Update & Airport Express Connection Problem

Hey, I bought an Airport Express recently, set it up on my current wi-fi network to stream audio.. worked perfectly and we had no problems. When iTunes 9.2.1 came out, I updated straight away and since then I've been having problems with the Airport Express. Now - if I want to use it to stream music, I have to go and unplug it and then plug it back in, wait for it to start up and then it will work. If I start streaming music pretty much straight away then I'll have about 45mins of playback before it will just stop. If I try to reconnect to the airport speakers then, it wont connect and comes up with a nasty looking error message in iTunes with loads of foreign looking symbols. I have to go unplug and then plug in again and wait for it to start up again before it will work again. If I don't start playing music soon after this 'reset', it loses its connection very quickly and I have to go plug out and in again to get it connected.
The green light is always showing, I've tried restoring to its default settings and then setting it up again, I've got the latest iTunes and Airport Express software.. but no idea how to stop this happening. Can anyone help as its getting very frustrating!
Thanks!

Same issue here. I just received a new Express N to replace my Express G (2004) since it was experiencing some minor stutter playing music (due to contention with the 10+ other clients on a 2.4Ghz wireless G network).
I have a dual-band Linksys 610n (latest firmware) with a 5ghz/40mhz N only network and a 2.4ghz/20mhz G only network. With the Express N configured to connect to the 5ghz N network as a client, I have to reset it every time I want to play music or I get the garbled error dialog in iTunes 9.2.1. In addition, after resetting, it only plays music for about 20 minutes and then starts to stutter and a minute later drops out completely and has to be reset once more.
I'm streaming from a 2009 MBPro/10.6.4 with 8GB Ram and it too is a client on the same N network. The MBPro is about 5 feet from the router and the Express N is less than 30 ft away through a few walls of drywall and wood studs. The Express G in the same configuration only experienced minor stutter during playback and never dropped from the network completely. I wanted to get the N express to remove contention by using the 5ghz network, obviously that's not going to work. I realize 5ghz has a shortened range (especially through objects), but 30 ft should be well within 5ghz reach and I have no problems with my other 5ghz devices (2 other MBPros).
The Express N has firmware 7.4.2 and the Express G has the latest firmware for it (6.x.x).
I'm going to try the Express N on the G network, but even if it works, I will probably just return the Express N and live with the Express G's minor stutters since there's no benefit to the N at that point.

Similar Messages

  • Time Capsule with (2) AirPort Express connection problem

    I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

    The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
    The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
    Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

  • New MacBook Pro (Leopard) Airport Express Connection Problem

    A Brand new 17" MBP Intel Core Duo 2.6 with latest Leopard OS and all updates installed unable to find (devices) ie: my existing older Airport Express (pre "n") - but my iPod Touch can.
    Using the iPod I can connect to the Airport Express network and surf web easily. The MBP can't find it. So I know the connection is good and the problem is with the MBP.
    I have tried to resolve various ways - all of which I've found here in the forums (except the last):
    • Hard reset of AX (Several times - it actually showed up once in Airport Utility, but once I'd configured it, it could not be found after restart.)
    • Connected Ethernet cable from AX to Laptop, Airport Utility found it this way once, I configured it and again, could not be found after restart. Tried again, Airport Utility could not find it.
    • Removal of Network Prefs from Library and restart (they rebuild automatically)
    • Safe start and restart
    • Banged AX on table
    Obviously I'm not alone here, and any other tips or things to try would be appreciated.
    Thank you.

    Just got off the phone with Mac Tech Support.
    Here's the fix:
    1. Connect your Airport Express to the Mac via an ethernet cable (after a hard reset)
    2. In Airport Utility, double click the AX icon
    3. Select "wireless"
    4. Change channel from "automatic" to 10 (auto always sets to 13)
    5. Go through the other panes and untick any boxes that have "over WAN" in them.
    6. Name your network
    7. Create and enter a network password
    8. Update settings
    9. Click on airport icon in your menu bar, select your network
    10. Open Safari and see if you're online.
    The problem I'm told has to do with so many other things (phones, microwaves etc.) hogging Ch. 13 space. If you still have issues, try a a different channel until you find one that works.
    Also, you don't really need to rename your Device (AX) just your network so it's recognizable.
    Good luck out there.

  • Airport express Connection Problem

    The airport worked fine at my home but i brought it to college and the airport says its connected but i get no signal. How do i fix the internet through the airport? My normal ethernet connection is working, just not the airport

    First off welcome to the discussions.
    You have to connect from the colleges Ethernet Port direct to your Airport Express. Just plugging in the Airport Express into a wall socket will not work unless the college has wireless capability.
    http://www.apple.com/airportexpress/
    So you have to be connected from your ISP's Modem to the Airport Express Wireless Router.
    Note the lower right side of the link.
    Don

  • AirPort Express connection problems!

    All right, I have an AirPort Express that up until now I've been able to successfully use to get both my MacBook and my Wii on the internet. But today, the signal kept disappearing from my menu bar. That had never happened before. I thought maybe I was too far away from it (even though both the airport and myself were in my tiny living room), so I moved closer, but it still kept disappearing. It would randomly appear, and I'd be able to use the internet for maybe 30 seconds, then it would disappear again. I tried soft resetting it, hard resetting it, and resetting it to the factory default with no success. The light on my AirPort Express shines green, but neither my MacBook nor my Wii can get/keep a signal. And now, after resetting it to the factory defaults, my MacBook can't connect to the internet even when the network DOES show up in the menu bar. Very frustrating! I used the AirPort Setup Assistant to restore my internet settings back onto the AirPort, but that didn't help. When I try to connect to it using the Admin utility, I get the spinning beachball for a while, then eventually get a password prompt—but after entering the password, it says, "The AirPort Admin Utility was unable to read the configuration of the selected base station. An error occurred while reading the configuration."
    Any help? I've got so much work I need to do, it's crazy.
    iMac G5, Power Mac G5, MacBook   Mac OS X (10.4.8)  

    further, do you mean your Airport symbol at the top of the screen grays out? If so, your symptoms are pretty much those of problems that are plaguing a number of Express users at the moment. You'll find several threads on the matter further down this forum, or, at least, threads describing the same symptoms.
    The only thing that works for me - most of the time - is to do a factory re-set, wait a little while, then reconfigure, with the Express connected directly to the computer via an ethernet cable. The longest I've lasted without the problem recurring is about three days. I'm about 14 hours away from three days since it last happened. I have my fingers crossed.

  • Airport Express connectivity problem

    I cannot connect to my Airport Express wireless network via my own Macbook (Intel) OX 10.5.5. I can see many other wireless networks that are not my own. I reset the Airport to factory default settings several times, deleted all of the keychain passwords and reset everything and still cannot find the wireless network I created. I thought that my Airport Express had become faulty (even though the green light tells me the connection is good), but I can easily recognize and connect to my wireless network on Airport Express using my iPod Touch--this tells me that it's definitely not the Airport Express, but is my Macbook laptop that is the problem. Does anyone else have this issue?

    Do you have a separate wireless network from another router? Have you tried connecting via ethernet to make the initial setup? If you do have a separate wireless network on another router, check to see if this router can 'see' your AE.
    I was having the same difficulties connecting to my AE even after a hard reset. It would connect once to set up, but then once saved, it could never find it again. You could also try lowering your firewall just to get the AE connected and set up.
    The only thing that worked for me in the end was to have my entire network set to WPA2 Personal, starting from my router.

  • Printing to Airport Express connected Laserjet 1012 very slow after update to 10.6.8

    After updating a pair of computers that we have here to 10.6.8, printing to our Airport Express connected HP LaserJet 1012 has become incredibly slow. I timed it and it is taking 2:30 to print a blank page, whereas printing the same blank page under 10.6.7 (on an external drive connected to the same MacBook Pro) happens within 2 seconds. One thing that I have noticed is that when I bring up the HP Printer Queue the computer says 'connecting to printer' for 20 - 30 seconds, then sits at 50% complete on the printing for some time - anyone else running into similar problems?

    Because I am not experiencing the same issue I have not needed to apply the CNET article. But just to be clear, did you follow the instructions to the letter?
    If you did and it's still not working then you can begin narrowing down where the problem is by following some basic trouble shooting steps. First thing I'd try is creating a new user account (call it TEST ACCOUNT) and leave it alone, then try printing from that account. If it works then you know it's a software issue in your normal user account. If it still doesn't work then what I'd do is:
    1. Download 10.6.8 Combo Update at http://support.apple.com/kb/DL1399
    2. Disconnect all peripherals (including the printer)
    3. Backup using both Time Machine and/or a Bootable Clone using SuperDuper or Carbon Copy Cloner
    4. Restart from the Bootable Clone or the Snow Leopard install discs.
         a) choose language
         b) Click Utililities Menu
         c) Disk Utility
         d) highlight the internal HD and the First Aid tab
         e) Repair Disk Permissions, Verify Disk & Repair Disk.
         f) exit Disk Utility and restart in Safe Mode
    5. Install the Combo Update
    6. Restart normally and test the system
    7. Begin connecting peripherals one by one and testing each.

  • ITunes (and Airfoil) can see Airport Express but can't connect in Windows XP (error -15000) - firewall problems?

    I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
    I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
    A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
    I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee.  I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
    I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
    I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
    How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
    I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
    Thanks for your help!

    I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.

  • Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay

    Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

    My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
    On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

  • AirPort Express connected to an iPod Hi-Fi; iTunes can't find the speaker.

    Hi,
    I've been trying to get my Hi-Fi to show up in iTunes via an AirPort Express connected to a MBP without much success..
    First I had some trouble connecting the Express to my exisisting wireless network (Wireless-N ADSL2+ Gateway WAG300N), but once I changed the WEP key to a correct lenght I got it working (green light on the Express). Actually I'm not quite sure that it's working as intended, the Express won't show up in the Aiport utility, only in the advanced setting of my wireless network (system preferences -> network). Is it supposed to show up in the Utility even though it's connected through my existing wireless network?
    I have both and optical and a 'regular' (English is not my first language cable and I've tried both, but the speakers won't show up in iTunes. I've got iTunes looking for external speakers so that shouldn't be the problem.
    Any ideas?

    Try setting-up AE as if for the first time (perform a hard-reset of the AE).
    This time, however, DO NOT connect the AE to your router initially. Connect it directly to your computer via ethernet cable when setting-up. Airtunes should now be enabled (this will not happen if you initially set up AE with AE connected to your wireless router).

  • I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
    Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
    Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

  • Since update, Airport Express not selectable...anyone else?

    I can't check the box in the "Multiple Speakers" window. I went into Preferences and ensured that the "Look for other speakers" box was checked, and it is. What the hay? Ticks me off, that thing cost me a bundle new, and now I can't use it, why?

    Ah. Odd that this is already in the Help menu....they knew it was going to happen, so they already had it in the Help menu?? Hmmm... Anyway, I hope this helps someone like me.
    iTunes 7 for Mac: AirTunes won't connect to remote speakers
    Symptom
    When using iTunes 7.0 for Mac, some users may not be able to connect to remote speakers using an Airport Express base station. In this case, the remote speakers would be visible in iTunes 7.0, but iTunes would timeout while trying to connect and the speaker menu would return to Computer.
    Products affected
    iTunes 7.0 for Mac
    Airport Express base station
    Solution
    To resolve this issue, IPv6 needs to be enabled for the network interface you are using to connect to the Airport Express base station. Follow the steps below to enable IPv6:
    From the Apple menu, choose System Preferences.
    From the View menu, choose Network.
    From the Show pop-up menu, choose the network interface used to connect to the Airport Express Base Station (typically the network interface used is Airport).
    Select the TCP/IP tab.
    Click the Configure IPv6 button.
    From the Configure IPv6 pop-up menu, choose Automatically.
    Click Ok and then click Apply Now.
    Reconnect to remote speakers in iTunes 7.

  • No Airtunes, Airport Express connected (green light)

    Hi all,
    After many an hour faffing around I finally got the AirPort Express connected to my Windows XP PC. I can edit the configuration using the Admin Utility, and the light on the AirPort Express is solid green (ohh the joy when THAT finally happened).
    Alas iTunes (6.0.1.3) doesn't see the speakers. The menu option (under Preferences> Advanced) is ON, I've checked my firewall and have UDP Port 5353 open (both ways), but still nothing.
    I'm not using any security on the wireless connection (no need) and I'm approaching my wits end.
    I have manually configured the AirPort Express to an IP address instead of using DHCP (which pulled my internet connection) and I ONLY want to stream music, not interested in using it to access the internet.
    What am I missing? I've Googled, read many posts on this forum, and THAT post by Simon that everyone links to, but to no avail. I'm SOOO close though, I know it!

    Side note: I'm on a PC not a Mac (freudian slip?)
    Info: I am on Telewest Broadband (UK) and my cable modem is a Scientific Atlanta Webstar 100 (it's a USB connection to the PC). My wireless connection is a D-Link AirPlus G DWL-G122 USB Adapter.
    OK I'll need to pick up a cable as I don't have one.
    Questions.
    You said: "Then connect the cable modem to the Airport Express ethernet port. Pull power to both the modem and the Airport Express for five minutes or more."
    "Pull power"? I take it you mean just leave them plugged into the power (the modem won't work without power anyway).
    The reason I ask for clarification is the next line:
    "Then plug the modem into power and wait a minute."
    Shouldn't it already be plugged in to power, if it's not plugged in, it won't work?!
    Finally:
    "Your Mac should now, after reconnecting to the Airport Express wireless network, be able to access the internet."
    So, is there anyway to configure the Airport Express NOT to access the internet. I'm not bothered about this at all, I just want to stream music downstairs. No internet access required (BY ME, I understand the Airport Express may want it, but does it NEED it).
    Apologies for more questions, and many MANY thanks for your responses so far. Once I get this working (and I will), I'll be writing up a detailed set of instructions, screenshots, the works (I'm a technical author by trade ya see).

  • Problems Printing: Airport Express connected HP Laserjet M1319f

    Hello,
    I have an Airport Express connected via ethernet to my network.  Attached to it is a HP LaserJet M1319f MFP printer, via USB.  I can get my iMacs and my Windows systems to print to the printer without a problem. 
    I would like to be able to print logs to it from my OS X Server (10.6.7), which is located quite a distance from the printer.  So far, I've had absolutely no luck configuring the Airport-attached printer and getting it to work.  From what I've been able to figure out, OS X Server expects any remote printer that it attaches to, to be attached via IPP, TCP/IP, or via Windows.  It doesn't seem to want to discover and use the printer via Bonjour.
    Any ideas on how I can make this work?  Am I missing something obvious?
    Thanks!
    Sven

    See if these guides help, it sounds like a driver issue. Does the printer work correctly when directly connected to the PC?
    Ensure that the Macs are not sharing the printer, as this is not needed and the PC should be able to find the printer on the AX.
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://www.ifelix.co.uk/tech/1004.html
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    http://www.ifelix.co.uk/tech/1008.html
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://www.ifelix.co.uk/tech/1012.html

  • Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

    I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the  (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme  (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme  (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
    The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
    isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

    Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
    The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

Maybe you are looking for