ITunes 9.2 Causing Continual Reset after 5 minutes of Sync

iTunes 9.2 causing continual reset after 5 minutes of syncing. This never happened with earlier versions. The iPhone basically reboots and takes a very long time to execute that reboot.

I am having the same issue, itunes is 'stuck' syncing with my Apple TV for hours and hours, no new content is viewable or playable, yet the previously synced items are still available, as well as my music library and photos.
I've tried rebooting the Apple TV, as well as my Mac, the network is working just great in all other aspects. (airport extreme base station router)
It seems that every time I update to the latest Apple software, I experience problems.
Updated to the latest Safari and my entire network went completely 'screwy' for days then just magically started working fine again. (this happened last time Apple released a new version of Safari)
Now I have the latest itunes, and suddenly this strange sync problem with my Apple TV.
Very frustrating, and equally mysterious how these problems just seem to 'fix themselves' after a few days (sometimes weeks) after updating Apple software.

Similar Messages

  • TS1424 I've downloaded a TV show on itunes and it is freezing up after 10 minutes. I see an error code 3256 - anyone have any ideas about how to get it unstuck?

    I've downloaded a TV show on itunes and it is freezing up after 10 minutes and won't play beyond that point. It says error=3256. Any ideas on how to fix this? thanks!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • C7 is continually reset After Updated to Anna

    Hello
    i have a Nokia C7
    I've updated the phone to Anna But is continually reset
    Why should I be reset?
    What is the solution??
    Pls Help Me!!

    did you try hard rest?
    What you see is what you get

  • Itunes music library player logs out after 5 minutes

    Running iTunes 11.1.1
    When playing music from my music library, the application closes after 5 minutes if the computer is not touched, i.e. volume changed, tune skipped, etc. It's like it "logs off".  I don't have any sleep settings turned on.  This happens with battery or with power plugged in. Any suggestions as to what might be causing?

    I've had the same issue since upgrading to latest iOS 5.1 on appletv and latest patches on mountain lion mine usually drops out after a minute

  • Why does VersaMail cause system reset after HotSync?

    On a clean factory default setup Treo 650, I can set up one account -- my SprintPCS account -- on VersaMail and successfully use VersaMail to download and send emails. After a HotSync with my Outlook Calendar, Contacts, Memos and Tasks, I see the following errors in my sync log. Then, when I attempt to launch VersaMail, the 650 always immediately performs a system reset.
    Error loading preferences for account '': An error occured while attempting to retrieve data from the device.
    Error loading preferences for account '': An error occured while attempting to retrieve data from the device.
    Error loading preferences for account '': An error occured while attempting to retrieve data from the device.
    Error loading preferences for account '': An error occured while attempting to retrieve data from the device.
    Error loading preferences for account '': An error occured while attempting to retrieve data from the device.
    Error loading preferences for account '': An error occured while attempting to retrieve data from the device.
    Error loading preferences for account '': An error occured while attempting to retrieve data from the device.
    Error loading preferences for account 'SprintPCS': An error occured while attempting to retrieve data from the device.
    OK VersaMail with 8 message(s)
    Thanks in advance for help on this, PalmOne. SprintPCS technical support has absolutely no experience as yet on this sort of problem. I was on the line for over an hour covering the same ground I had before calling them. Because this is related to two PalmOne software products -- HotSync and VersaMail, I figure you guys would have a better idea where to start troubleshooting and ultimately resolving this.
    Thanks again!
    Post relates to: Treo 650 (Sprint)

    let's see... digging back into the memory banks here...
    I think I went to www.palmgear.com, and searched for filez, and found it there. to be more specific about your question, though, are you asking how to install files to palm in general (i doubt that just from reading your thread), or rather how to find the filez file in the first place?
    for ease, anyway, here's the URL for filez
    http://www.palmgear.com/index.cfm?fuseaction=software.showsoftware&PartnerREF=&siteid=1&prodID=9992
    strange, too - and you might watch out for this if you have agendus installed on your treo - now when i click on the calendar button next to the phone button, the palm does a soft reset - VERY annoying. I haven't gone through the trouble of finding a fix for that one yet, but will search one of these days...

  • After installing itunes 7 my it locks up after a minutes

    After installing new Itunes Verson 7 my computer locks up only if I am using Itunes and no nothing else. I tried deleting the program and reinstalling with the sames esults. Can I fix it or how can i go back to ver 6?

    Do you have the cover on your ipad? If so you may need to go into settings>General and turn on lock/ unlock so that it goes into standby when cover is closed. Not sure this is your problem but it was why my battery didn't last long. As far as long charge time goes I have noticed it is taking longer to charge also. Hope they fix some of these bugs in the first update.

  • IPhone 3G freezes and resets after a minute or so w/ wifi on internet

    My iPhone occasionally freezes whenever i do a http://i.dslr.net/tinyspeedtest.html on wifi. It works sometimes and other times it will freeze after being stuck on calculating for a while. This only happens on wifi, or so it seems. I only used to check on my edge/3g then i got wifi, now sometimes it freezes. Any way to prevent this?

    The problem seems to have come from my wireless transmitter (to my wii). I hit a few buttons on it and the problem solved itself. Why would an outside product over-ride my macs internet sharing? No idea, but it's solved for today at least.

  • Every single app including iTunes, safari forces close after ten minutes of activity? I have closed all apps with minus button and still closes

    Every app on my iPad force closes including safari, and iTunes, it seems ir forces close after fifteen minutes of opening the app or iPad apps. I have tried using the double click start button to close all running apps but it still force closes and I've noticed that when I reopen an app after it foreclosed I will get a black screen and will have to close open and close and open in order to get any app running again. I know you can't get a virus but I am wondering. I am hoping I won't have to reset and lose everything I have. My memory is too low for backup. But if I have to reset can someone tell me what the reset does and if backup would restore on the reset. Ive tried everything clearing cashe cookies, history. Please help this is very frustrating especially when your in the middle of writing a paper and it force closes on me. I have never hooked it to a pc so not sure i would get a virus and I haven't used iCloud. If you have any suggestions can you tell me exactly what I need to do to fix this. I don't have the money to call apple support, I am a nursing student. Thanks, Abby

    Hold Home and Sleep button and check if the problem keeps

  • Can't load iTunes and Apps in my iPhone after upgrading to OS5.

    So, I updated my iPhone late last night to the new IOS5.  It downloaded everything and went through all the permutations my iPhone went through with each OS upgrade.
    But after the update and sync were complete, I no longer have any Apps on the phone nor any music.
    On my iTunes page, I still have about 1.42GB of music (though I had over 3.5GB on my iPhone), but I'm reluctant to sync it up with the iPhone in case that completely wipes out the rest of my library, which I hope is still sitting somewhere in the ether.
    Separately, my Apps appear on iTunes.  I then clicked on "Sync Apps" and clicked each item.   I hit "Apply" and then it goes into sync mode.  After a minute, the sync is completely and none of the Apps are moved back onto my iPhone.  Very confusing.  Anyone else having these problems?
    My phone is 3GS.

    Not sure what you mean.  iTunes is for the computer.

  • How to automatically turn off leds after 1 minute/button press

    I need help on how to turn off my LEDs 1 minute after my program starts or when the stop button is pressed.. I tried putting a while loop over the LEDs but it doesn't work.. Also the score automatically resets after 1 minute.. how do I maintain the score while turning off the LEDs? thanks.
    Attachments:
    FYP_3.vi ‏71 KB

    Find the example programme for ur need.Hopes this helps.
    Balaji PK (CLA)
    Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
    Attachments:
    Boolean On Off.vi ‏15 KB

  • My Home Sharing connection on Apple TV stops after 35 minutes.  I have to go back to the computer, cancel Home Sharing in iTunes, restart Home Sharing and then it continues to work for another 35 minutes.  How do I get it to continue running?

    I thought that this was caused by the Energy Saving setting in Preferences, but I reset the shut down time to "Never" and it continues to happen.  Is there some other setting that I need to change?

    Go to;
    -System Preferences
    -Security & Privacy
    -Firewall-Unlock to Make Changes
    -Advanced
    -Untick 'Log Out After XXX Minutes of Activity or Enter a Figure of Maximum Minutes You Think You Will Use Your Apple TV
    -Click OK
    -Relock
    Issue Resolved
    John B

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Just upgraded to latest iOS and my iPad does not come back up.  It displays a line to an iTunes logo and then goes off and after some minutes comes back on.  I cannot reset it or anything else.

    Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on.  It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on.  I cannot reset it or anything else.  It is completely non-functional.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong?

    After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...

    I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

  • I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

    I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

    I am having the same issue but mine is with Netflix.  And there are only 4 categories now on the main menue when there used to be 5.  Something went crazy with ATV software.

Maybe you are looking for

  • How do I stop my Reader version 11.0.1 from crashing when opening any PDF file?

    I've had this problem since yesterday and it started very suddenly but now I cannot view any of my files because the reader crashes after a few seconds. I cannot use the app at all, please help! The files I'm trying to view on my reader are not new,

  • Conky weather icon issues

    Ok, I have been using the conkyForecast script for a while now, and it's been nice, but, for some reason it decided not to show anything until today actually. So, I started investigating the conky man page, and found that it has weather information a

  • Itunes doesn't open when i plug in my iphone

    iTunes doesn't open when i plug in my iPhone

  • DB Link from Oracle to SQL Server error

    Dear buddies, I need to perfome some select on the tables which reside in SQL Server 2005 from Oracle 10g. I followed the steps given in : http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm I could perform a TNS ping which

  • Pattern fills with seamless patterns

    Hi, I'm doing some shapes that have a seamless pattern fill & then I want to use the shapes with the sealess pattern fill in another seamless pattern.  The only way i see I can do this is by expanding the artwork before dragging it into the swatch pa