ITunes 9.2 + install problems please help.

hi guys i recently bought a new laptop and when i try to install itunes 9.2 or higher it shows an error.
error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
i really need itunes because i recently bought an ipod touch and i cant sync it to get any songs
any help is greatly appreciated.
thanks

error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
That's consistent with disk/file damage, tame.
Let's try running a disk check over your C drive. There's Windows 7 instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
[How to use CHKDSK (Check Disk)|http://www.w7forums.com/use-chkdsk-check-disk-t448.html]
Does the disk check find/repair any damage? If so, try another iTunes install. Does the install go through without the error this time?

Similar Messages

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

Can't get passed this install problem - Please help Adobe.

I've downloaded the TRIAL version of PRODUCTION PREMIUM CS6. Once running / installed and tested it I will purchase it.
But cannot get past this ERROR problem.
Here is my install ERROR log ADOBE.. Please help.
URGENT.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF027, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdir6Qpuljrb/Assets1/Application/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" to "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" (Seq 1205)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1205)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure

You can try resolving your issue using following document :
http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
and
http://helpx.adobe.com/creative-suite/kb/error-unable-copy-file-tmp.html
Regards,
Sharath Holla.

TS3212 could not access network location iTunes\. This is the message I keep getting when itunes tries to install. Please help

I keep getting the following message after trying to install iTunes. Please help. could not access network location iTunes\.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Itunes connection and Passcode problem (Please Help!!)

So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!

You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

Very Strange Logic Studio Installing Problem, please help !

Hello .
I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
Than i erased what ever i could which was left from the failed installation .
And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
So far what i erased after failure was (only the ones i could find out of this list )
Application Files
/Applications/Compressor
/Applications/Logic Node
/Applications/Logic Pro
/Applications/MainStage
/Applications/Soundtrack Pro
/Applications/WaveBurner
/Applications/Utilities/Apple Loops Utility
/Applications/Utilities/Impulse Response Utility
Factory Settings, Instruments
/Library/Application Support/Logic/
/Library/Application Support/Garageband/
/Library/Application Support/Garageband Content/ (Legacy)
/Library/Application Support/Soundtrack Pro/
/Library/Application Support/WaveBurner/
Impulse Responses
/Library/Audio/Impulse Responses/
Receipts
Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
/Library/Receipts/AudioContentforSoundtrackProXX.pkg
/Library/Receipts/CompressorXX.pkg
/Library/Receipts/EXS24SamplerLibrarySamples.pkg
/Library/Receipts/EXS24SamplerLibraryStudio.pkg
/Library/Receipts/GarageBandXX.pkg
/Library/Receipts/ImpulseData.pkg
/Library/Receipts/ImpulseResponseUtility.pkg
/Library/Receipts/JamPackXX.pkg
/Library/Receipts/LogicXX.pkg
/Library/Receipts/MainStageXX.pkg
/Library/Receipts/RemixToolsXX.pkg
/Library/Receipts/RhythmSectionXX.pkg
/Library/Receipts/SharedLogicStudioHelpFiles.pkg
/Library/Receipts/SoundtrackProXX.pkg
/Library/Receipts/UltrabeatXX.pkg
/Library/Receipts/WaveburnerXX.pkg
User Preferences:
~/Library/Preferences/com.apple.logic.pro.plist
~/Library/Preferences/com.apple.logic.pro.cs
~/Library/Preferences/Logic/ (Legacy preferences)
License
/Library/Application Support/ProApps/Logic Studio System ID
Apple Loops
/Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
/Library/Audio/Apple Loops/Apple/iLife Sound Effects/
/Library/Audio/Apple Loops/Apple/Jam Pack 1/
/Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
/Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
/Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
/Library/Audio/Apple Loops/Apple/Jam Pack World Music/
/Library/Audio/Apple Loops Index/
But what ever i tried, gives no solution . At the end a fail .
How can i wipe out all the Logic existence from my computer to make new install ?
Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
Did anyone experienced that ?
I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
Thanks a lot

it is very frustrating to see such an installation problem happening from a "professional" called DAW .
I am actually a Protools user , and i have never had this type of complications .
I mean come on, i am just trying to install the thing .
On a new system, on a new computer and from an original purchase .
I believe i have enough computer knowledge to instal a simple software .
But i am spending almost 10 hours since yesterday to install Logic .
Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
Especially to see a professional audio software like Logic in this epic fall, is very very bad .
I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
Ah , i am sure Apple won't put attention on it , but doesn't matter .
You just lost 1 customer for Logic
I am erasing this thing now from my computer and continue with Protools as the way i was doing .
Sorry if i am bitter, but this is not acceptable .
Message was edited by: timbre2010

TIGER/POWERBOOK 12" G4 - erase and install problems. please help..

Hello,
I have a powerbook g4 (the last of the powerbook 12"/ 80gb/1.5ghz to be released) with tiger installed.
I have had a a crash x 2 when doing software updates. So I managed to get it going, to then back up to an external drive - to do an erase and install.
Once I went to do the erase and install it failed, so I tried again and it seems to have done the erase. now my actual HD isn't visible as the select detination to install?
So, I can't actually even attempt to install with no destination.
any help would be most appreciated.
thankyou

suzannah-a:
Unfortunately, it seems as if your HDD has failed. Try booting from the install disk, the go to the Utilities menu and launch Disk Utility. If the HDD shows up in the sidebar, you should reformat it. (Directions below). If it does not show up, you need to replace the HDD. Post back for a list of available HDDs and vendors, step by step directions and additional tips.
If your HDD shows up follow these directions to reformat and erase:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
If you are able to do the reformat and erase, you can then proceed to restore from your backup, or to install the OS from disk.
Please do post back with an update on how it goes, and with further questions or comments, if any.
cornelius

Z97M Gaming windows 7 installing problem, please help

hi everyone. I hope someone could help me. This is my setup I just built:
MSI Z97M Gaming (latest bios updated, v1.4)
Intel Core I5 4690S Cpu
2 sticks of Gskill DDR3 (2x4GB) 2400Mhz
Nvidia 970GTX 4GB PCIE video card
Samsung EVO 840 - 250GB SSD (latest firmware updated)
Corsair 750W PSU
And this is the problem: when i boot (from USB) Windows 7 SP1 setup, it runs fine until it asks me for a driver (which is missing) in order to proceed with installation. I suppose it's SATA driver, so I've copied last version of Asmedia SATA driver in my usb key. But when i point to it, windows setup says that no driver has been found! So it doesn't show the ssd and I can't proceed with setup. I've tried every subfolder of the "asmedia_sata_win78" main folder.
Also, I set LEGACY+UEFI mode in bios. I've also tried IDE mode for the sata controller, but nothing works
Any suggestion, please? Sorry for the bad english

do you have any other storage to try say standard HDD? to try it instead this SSD
Quote
Still, I boot from usb drive, still I point to intel 32bit storage drivers, still windows shows "Intel 9 chipset series SATA AHCI controller". But it doesn't find the hard disk
i suspect something isn't ok with your installation disk
since its unclear is it 32bit or 64bit and since accept 32bit drivers only
can you use a better one? and to make sure that it would have SP1 integrated

Itunes will not install. PLEASE HELP!

i've tryed to download itunes 10 and quicktime. but once i've pressed the blue 'download now' button the next page appears with a red box that stretches to the bottom of the page and says "This frame was blocked because it contains some insecure content"

Hello, Inger, and welcome to the Discussions.
I'd suggest you start a new topic with your issue (use the "Post a new topic" link at the top of each main topic page). It's generally better to ask a question as a new topic rather than as a reply in someone else's thread. It's more courteous to the original poster, particularly when your issue really isn't the same as the original topic (the original poster, unless the post is misleading, cannot even get the iTunes installer from Apple), and is more likely to get your question the attention it deserves.
When you repost, please include full details: your version of Windows and iTunes, your model of iPod, etc. so that people have complete information on which to base a diagnosis.
Regards.

!!instaling problem please help!!

hey i was trying to install starcraft on my macbook, it said that "you cannot open the application starcraft installer because it is not supported on this system. i want to know how to be able to install it, like what i have to do to fix it.
please reply with suggestions. thank you in advance

The System Requirements are PPC Looks like it may not install on Intel.
You could install Windows 98. I wouldn't but you could.
-mj
[email protected]

ITunes Gift Card + Account Problems Please Help Save My Money!!!

I have a Taiwanese itunes account and i bought a gift card in australia (I live in Australia) and i know that i need to get an australian itunes account to buy items on itunes. so i went to create a new account in the australian section and i filled in all the boxes and also it asks for a gift card code if i had one and because i was too desperate so i typed in the code and clicked continue (this was in the payment method section). and then it came up with the page saying that your gift card is redeemed and you can now shop and i clicked ok and it returned to the main page (australian one) and i tried to login into my new account but it wouldn't let me and so i tried to type in my gift card code in the redeem section and it says that this gift card has already been redeemed by another account. I don't know how the **** am I gonna get my points back. Pleas Help Me !!!!!!!!!!!

I'm don't think that gift cards are currently available in India (and as they are country-specific you won't be able to use cards from another country).

8.1.6 and designer 6i post install problem - please help

Hello all,
I installed designer following the install guide extremely closely. The install went off without a hitch. However, when I try to create and ERD, or any diagram, I receive this error:
Message
ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
Message
ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
Message
RME-02124: Failed to execute SQL statement: insert into I$SDD_DIAGRAM_SEGMENTS (DIAGRAM_REF, SEQUENCE, GRAPHICAL_DATA, PARENT_IVID, PAC_REF) values (:diag_id, :seq, :data, :diag_ivid, :diag_id)
I'm fairly new to Oracle but I did have designer 6.0 working on 8.1.5.
Does anyone have any suggestions?
Thanks,
Damon

The same happened to me. It turns out that it had something to do with old windows registry entries that let the repository install program know that I had designer 6.0 previously installed on my system. The install apparently isn't wise enough to know that it is installing 6i. It checks the registry for the first Designer version identified and decides what repository components you need based on that. 6i uses the standard repository components (6.0 versions) and some new stuff.
If you read your install documentation carefully (Chapter 2, Step 14, Item 2), you will note that you need to select two components to install. If the repository
admin utility is <prior-version-aware> it neglect to even display one of those options and its easy to blow right past that screen without realizing something is amiss (that's what I did ;-P ).
Hope this gets you going,
As with any Oracle product install
-- Good Luck!! --
Sandi
null

EMU 1820m install problem please help me I'm going crazy

I've brought the EMU 1820m two days ago and for two days now I've been looking everywhere for an answer.
So I plugged the card in the computer, I turn the power on and... Windows doesn't detect the card. I look on the net and apparently it's because I have to delete the previous sound card in the bios and desinstall them. OK. I do it.
I reboot again and again and windows still doen't recognize it. Nothing. It's plugged but windows doesn't see anything.I look on the net for various solutions: trying a different PCI slot, changing where it's plugged to the power supply, nothing...
I was so excited to buy this card and now the disappointment is even greater...... Can anybody help me???

Windows doesn't detect anything... It's not listed in the device manager... I will try to find another computer to see if it works...
By the way, the power supply cable has three plugs, one for the card, one for the power supply and one for the hard drive (if you don't have any cable left on the power supply)... Where do I plug it on the hard drive? I'm trying everything, I'm desesperate....

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

My itunes has gotten error 7 (windows error 14001) itunes wont even open it just says itunes was not installed correctly. someone help please

my itunes has gotten error 7 (windows error 14001) itunes wont even open it just says itunes was not installed correctly. someone help please

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

ITunes 9.2 + install problems please help.

Similar Messages

Maybe you are looking for