ITunes 9.2 stops adding multiple artwork in multiple selection mode. Help?

Hi everybody,
Since 2003 I've been using iTunes and adding multiple artwork in several tracks at once.
Lets say: I added 10 tracks of a CD to iTunes library, then selected all of them and then right click to choose "Get Info > Multiple Item Information". Then I just dragged and dropped as many artwork pieces as I wanted onto the artwork window, one by one. Clicked OK and voilá.
Now it will only accept one artwork. Following the procedure I used to do, now it will only take the last artwork I place onto the artwork window.
Now the only way to get multiple artwork in a CD is adding all the artwork (lets say the 20 pages of the booklet) one by one in "each track" separately!, which is a pain in the neck.
So now I have to add artwork one by one to each track one at a time.
Is there a NEW way to add multiple artwork on multiple tracks at once in iTunes 9.2?
Screen shot: http://grab.by/51UT
Thank you for your help.

Hi- you might've already figured this out on your own, but:
A) add the first artwork picture (what you want for your cover artwork) using "Get Info > Multiple Item Information" - and close the Multiple Item Information window
B) with the multiple tracks still selected, drag your additional artwork picture items into the artwork panel in the lower left corner of the iTunes window (this is the artwork panel titled "selected item").
C) your additional artwork will be added to all of the selected items. You can click through the artworks using the left/right arrows above the artwork panel.
Obviously you can also use this same method to add that same additional artwork to any other tracks, from other albums, etc. simply by selecting them as well.
Side note, the easiest way to select all tracks from a single album: select the starting track, then use ctrl-shift and select the ending track- all tracks between those two will be selected.
Aaaaaand you're done! Hope this helps!

Similar Messages

  • My itunes opens but stops responding two seconds later....Help?

    Recently i got given an ipod and my itunes had been working fine previously. So i loaded my ipod and my two siblings ipods onto the computer and we were downloading music and it was working fine. Later i came back and tried to open itunes and the window opened up but it froze on 'loading itunes store' and stopped responding. I do not have bonjour or asc so its nothing to do with that. Does anyone know how i could fix this? Thanks

    The message "this program is trying........" probably came from your secyrity software trying to insert back the LSP.
    If you are still having these type of problems after trying the winsock reset and are running any kind of net monitoring software like Bsecure, Net Nanny, AVG Family Safety, Safe Eyes, Covenant Eyes, Norton Online Security etc... I would suggest that you try uninstalling said software and reinstalling iTunes 10.5 to see if that corrects the issue.
    Or You may follow article TS4123 steps to identify which software in your system is the culprit and uninstall it. Good Luck!
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    Last Modified: November 28, 2011
    Article: TS4123
    Symptoms
    You may notice the following symptoms after installing iTunes 10.5 for Windows:
    iTunes is slow to respond
    Windows is slow to respond
    iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
    Some processes installed by iTunes are using up a lot of resources in the Windows Task Manager.
    iTunes Store looks empty and white as shown below:
    Products Affected
    iTunes Store, iTunes 10 for Windows
    Resolution
    Look for modifications to Windows by:
    Running MSINFO32 by choosing either Start > Run, or using the search box to search for
    Once it is open, expand Components and then expand Network.
    Click Protocol. The first value should look like this:
    However, if you find a value that is more like this, it indicates that there's an LSP (Layered Service Provider) monitoring your computer:
    "<LSP Info>" is variable and may specifically mention a software suite, or appear to be a meaningless acronym
    Scroll through the list on the right and look for any LSPs that have been installed by third-party software. By default, the Windows OS will have 10 values:
    MSAFD Tcpip [TCP/IP]
    MSAFD Tcpip [UDP/IP]
    RSVP UDP Service Provider
    RSVP TCP Service Provider
    MSAFD NetBIOS [\Device\NetBT_Tcpip...
    The value above repeated 5 times with additional variables at the end
    Note: If you want to know more about which values from this key are part of Windows, please review Microsoft article 811259.
    Once you've identified the third-party LSPs, determine which software placed them there. Here is a partial list of LSPs you might run into and the software that may have placed it there:
    Product or Manufacturer
    LSP Name
    Bigfoot Networks
    BfLLR over [MSAFD Tcpip [TCP/IPv6]]
    ByteMobile, Inc.
    BMI over [MSAFD Tcpip [TCP/IP]]
    Covenant Eyes
    Covenant Eyes Monitoring over [MSAFD Tcpip [TCP/IP]]
    PC Tools / Spyware Doctor
    PCTOOLS over [MSAFD Tcpip [TCP/IP]]
    SafeEyes
    Internet Content Filter over [MSAFD Tcpip [TCP/IP]]
    SpeedBit Video Accelerator
    SBLSP over [MSAFD Tcpip [TCP/IP]]
    VMWare
    VMCI sockets DGRAM
    Once you've identified the third-party software that installed the LSP, you can remove that software. If the software is your security software, see iTunes: Troubleshooting security software issues for additional information.
    Note: If unsure on the origin of your LSP, you may try to locate vendor information to determine which software is responsible for the non-default value here.
    Reset the WinSock key
    If you are unable to identify the software that installed the LSP, you are unable to remove this software because it performs an important function for you, or you've removed this software and the issue persists, you may wish to reset the WinSock key.
    To do so, please do the following in an administrator user:
    Windows Vista and Windows 7:
    Windows XP:
    Enter the following command:
    netsh winsock reset
    Restart the computer and test the issue.
    Note: If the issue returns, third-party software may be reinserting the LSP.

  • Get Selections From ALV on Multiple Selection Mode

    Hi,
    How can i get values of selected rows from ALV that has selection '0..n' (multiple selection) ?
    Can somebody help me pls?
    Thanks.

    Hi Nurullah,
    Steps to make multiple rows selectable in ALV:
    1) Create the selection property of the node that you are binding to the DATA node as o..n
    2) Un-check the, "Initialization Lead Selection" checkbox for the node which you are using to bind to the DATA node
    3) In the WDDOINIT method specify the ALV's selection mode as MULTI_NO_LEAD. It is important that you set the selection mode to MULTI_NO_LEAD or else in the end you would be capturing 1 row lesser than the total number of rows the user has selected. This is because 1 of the rows would have the LeadSelection property & our logic wouldnt be reading the data for that row. Check the example code fragment as shown below:
    DATA lo_value TYPE REF TO cl_salv_wd_config_table.
      lo_value = lo_interfacecontroller->get_model( ).
      CALL METHOD lo_value->if_salv_wd_table_settings~set_selection_mode
        EXPORTING
          value = cl_wd_table=>e_selection_mode-MULTI_NO_LEAD.
    Steps to get the multiple rows selected by the user
    In order to get the multiple rows which were selected by the user you will just have to call the get_selected_elements method of if_wd_context_node. So as you can see its no different from how you would get the multiple rows selected by the user in a table ui element. First get the reference of the node which you have used to bind to the ALV & then call this method on it. Check the example code fragment below:
    METHOD get_selected_rows .
      DATA: temp TYPE string.
      DATA: lr_node TYPE REF TO if_wd_context_node,
                wa_temp  TYPE REF TO if_wd_context_element,
                ls_node1 TYPE wd_this->element_node_flighttab,
                lt_node1 TYPE wd_this->elements_node_flighttab.
      lr_node = wd_context->get_child_node( name = 'NODE_FLIGHTTAB' ).
    " This would now contain the references of all the selected rows
      lt_temp = lr_node->get_selected_elements( ).
        LOOP AT lt_temp INTO wa_temp.
    " Use the references to get the exact row data
          CALL METHOD wa_temp->get_static_attributes
            IMPORTING
              static_attributes = ls_node1.
          APPEND ls_node1 TO lt_node1.
          CLEAR ls_node1.
        ENDLOOP.
    ENDMETHOD.
    Hope this helps resolve your problem.
    Regards,
    Uday

  • How do i get itunes 11 to stop adding music played from external hard drive to itunes library

    I use itunes 11 to play music from my external hard drive and when i am finished using the hard drive and disconnect it the artist and songs appear in the itunes libary and when i click on it to play them it cannot locate the file and i assume this is becuse under the advanced prefrences tab i unchecked the auomaticly add played music to itunes library. I do not want my external hard drive music to be added to itunes library which at this point it does not but it is still showing the music in the library even though it cannot be played this is very fustrating please help. how do i get the artist and songs played from the external hardrive from appering in the itunes library.

    Do you have a working copy of the library anywhere? The key file is called iTunes Library.itl and normally exists inside <User's Music>\iTunes. This is the file that knows what is in your library and each of the playlists, and holds ratings, play counts etc. Changing the media folder path in preferences tells iTunes where you'd like it to store media in future. It doesn't magically connect iTunes to any media that might already be there, or fix links to media that has been moved, or make it pick up a non-existent library file. If the worst comes to it you will need to import the media into the new empty library.
    See Recover your iTunes library from your iPod or iOS device if you have any of these to recover ratings, play stats and playlists, and to associate your device with the new library.
    tt2

  • ITunes 10.1.0.56 - multiple bugs! Help!

    Got a couple of different but similar problems with my iTunes (running windows 64bit).
    Firstly, when I import an MP3 folder into iTunes, and it doesn't recognise the album artist, so spreads the MP3s out all over the place, I am unable to input the album artist manually through the 'get info' option. I mean, the option is there, I can input the data, but then when I come to click 'ok' iTunes ignores what I just did, and leaves the MP3 all spread out!
    Same things is happening with album art. In addition to the above problem also occuring with album art, when I click the 'get album art' option, it seems to hang for a moment while retreiving it then...nothing!
    Can anyone help?!!!!!!

    It's your WIndows 7 permissions on the itunes media folder.
    Give yourself full control & ownership of it, and all its subcontainer folder.
    This webpage has screenshots of the security settings I'm talking about.
    http://helpdeskgeek.com/windows-7/windows-7-how-to-delete-files-protected-by-tru stedinstaller/
    You need to restart itunes for it to read the new permission settings.

  • Ranges input using multiple selection in select-options

    Hello,
    I have declared a single selection field with multiple selection as follows:
    SELECT-OPTIONS:
       S_PONUM FOR EKKO-EBELN NO INTERVALS,
    If a range is entered using multiple selection, no value appears in the selection field on screen, however, the ranges tab in multiple selection shows the range. Is there a way to programatically test if a range has been entered using multiple selection? Help is appreciated.
    Regards

    Hi,
    If you not displaying the intervals then user can enter only one value then option field will be with 'EQ' sign.
    LOOP AT S_PONUM.
    IF S_PONUM-OPTION NE 'EQ'
    " Then Values are entered using the multple selections
    ENDIF.
    ENDLOOP.

  • Adding multiple artwork files to several items on iTunes 11

    Hi all.
    in previous versions of itunes one could add artwork in several ways one of which allowed for easily adding several artwork files to more than one item at once without replacing the existing artwork.
    I am talking about the little square that was on the left bottom corner of the screen and you could chose if you want to watch the artwork for the currently playing song or the selected song. you could paste into it or simply drag onto it. it would add the art work in appose to replace the existing one as happens when you do it from the info window.
    this little square disappeared from version 11 and now I am unable to add several files to several items at once.
    anyone solved this pickle?

    treyer11 wrote:
    IThe point is, I could drag and drop previously and have gone backwards in capability which is supposedly against what Apple platforms inherently stand for.
    The point is it has not gone backwards in capability. It works just fine. I can drag & drop to multiple selected items just fine.
    Something is wrong wtih your install.

  • Adding local artwork to tracks in itunes without embedding

    hi
    i am new to itunes, having recently switched from a PC to a Mac, and am trying to add artwork to tracks in my itunes library. all of my artwork is stored in each album folder. the images are typically 300-400kb each (i want high quality artwork for fullscreen playback so have scanned my CD covers) and i have multiple artwork for some albums, so would rather avoid embedding artwork as this could increase the size of an album folder by several MBs. i am aware of the Album Artwork folder for non-embedded itunes artwork that is accessed using the 'get album artwork' feature in itunes 7, but this only seems to work for getting album artwork from the itunes store, which i don't want to do as i already have better quality artwork on my local hard drive. so does anyone know a way of getting images into the Album Artwork folder from a local drive in such a way that they will be recognised in itunes?
    thanks
    nick.

    Check this out ->
    http://www.macosxhints.com/article.php?story=200610011
    1071871
    this method works for adding single artwork images to each album, placing them in the Album Artwork folder as itc files, but for some reason the images aren't picked up for the Cover Version visualisation. And because i want to have more than one image for most of my albums, i think i am going to have to embed all art, unless anyone has any other ideas.
    nick

  • Adding multiple artwork in itunes7 - no joy

    Another bug with the latest release of itunes or I'm being daft, is anyone having difficulty adding artwork across multiple items? I used to copy the image and select the tracks in the library I wanted to apply the image to and then pasted the picture in the artwork space. Now, when I try to do the same, for more than one track, although i don't get an error message, no artwork appears. I can only add artwork track by track which is ridiculous. Any suggestions please?

    That doesn't work indeed in iTunes 7 (deliberate or a bug?).
    Alternatively select all tracks of an album and Get Info.
    Then drop it in the artwork pane. It will be added to all tracks. That does work.
    Hope this helps.
    M

  • I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
    It constantly gets harder.

  • Adding Album Artwork in iTunes

    Is there any easy way to add album artwork other than saving eight hundred pictures and adding them song by song?? It would make sense to allow users to drag the artwork from the store pages straight onto the artwork box in iTunes. What's the big deal? Everything else is so easy, why is this so strange? I have to be missing something painfully obvious. iTunes does it for you when you buy songs, but why can't you add the artwork for your own cds in an easier manner?
    Why not just make it easy? I don't write code or programs, but I know there's got to be a way. I should be able to click on the links beside my album names, go directly to the album in the iTunes music store, and drag the artwork onto the box. That sounds so logical, how could this not be available. I'm not advocatiing Windows media player, but you don't have to lift a finger ... it does it for you.

    If the artwork is visible within iTunes for the songs, then re-sync the iPod to iTunes.
    If this did not help, then Restore the iPod and put the music back on from iTunes.

  • ITunes has stopped adding mp3 files.

    iTunes has stopped adding mp3 files manually via the add file option, this has happened in the last week, it is music I have bought not illegally downloaded. I have the latest software installed, please help, thanks.

    Had the exact same problem and turning off match indeed did fix it.
    Glad Apple has Match working even better than before...

  • Why is iTunes not showing mt MP3 album artwork?

    I noticed after the latest iTunes update that most of the artwork I manually added in the last year to songs has gone missing. About a year ago I began adding new songs using the MP3 encoder. Previous songs were all loaded as AAC files. The AAC files all are fine. The artwork image still shows on the MP3 file icon in windows explorer so I assume it is still embedded in the file.
    Deleting and re-adding the file back into iTunes doesn't help.
    The Comments info box for the problem files also now includes a weird string of code that wasn't there before.
    00000000 00000210 00000ACC 000000000075C224 00000000 00355D39 00000000 00000000 00000000 00000000 00000000 00000000
    Finally, I noticed the iTunes folder now has an Album Artwork folder in it and It contains two folders Local and Download in it. I don't remember these from prior versions of iTunes. I could be wrong?
    My guess is iTunes changed the way it keeps track of artwork in files and re-organized itself from older versions, but had a problem with MP3 files. It then put a notation in comments and stopped showing the embedded artwork.
    Does anyone know what's going on here.

    I've always assumed those silly strings were recording the results of the gapless playback analysis but whatever they're for it would be better if they were stored in a spare field.
    Windows Media Player/Windows Explorer may be less fussy on embedded artwork formats than iTunes or the media file might actually be missing the art but the Windows Explorer cache (Thumbs.db) still shows it. You say removing-reimporting doesn't help but I assume you can still paste new artwork in and have it remembered. If so you might want to use the following tool to at least take some of the effort out of searching out which tracks you need to repair.
    *How to find tracks without artwork*
    To find all the tracks without artwork so that you can update them you can try http://www.stum.de/itunes-find-tracks-without-artwork/ for Windows or http://dougscripts.com/itunes/scripts/scripts13.php for Macs. Use Google, Amazon, Discogs etc. to locate relevant jpeg images. Ideally these should be square, 320x320 pixels or above and borderless to give the best results in the various menus. If you have artwork for some tracks of an album, but not others, select a track with artwork, right-click (Option-Click for Macs) on the art & click copy, then select all the tracks of the album, use CTRL-I or Command-I to *Get Info* and then paste the image into the artwork box.
    I say 320x320 because I believe (from using TouchCopy) that it's the size used in the iPod cache so if you're going to crop or resize you might as well work to that size. Otherwise 200x200 is probably good enough.
    tt2

  • After downloading music and dragging into iTunes I end up with multiple copies of the album on my hard drive. I do have the "copy files into iTunes library" checked. When I try to erase one of the copies I end up with red ! in iTunes library.

    Please Help!  After downloading an album and dragging it into itunes I end up having multiple copies of the album on my hard drive.  I do have (under Itunes preferences, advanced) copy songs into itunes library "checked".  I'm sure this is the reason for the multiple copies.  When I try to delete one of the copies of the album and go back to itunes and try playing a song, I get a red exclamtion point next to the song with an error message saying itunes cannot locate file. My questions are, Does Itunes literally make a copy of the song? If so , How do you know which file to delete?

    Sony's own entertainment software on the Vaio plays merry **** with iTunes, worse there's no telling when it will kick in.
    First head over to the Sony Vaio site and get the update for the software, that will stop it from messing with the iTunes database/library files when you connect your iPod.
    http://support.apple.com/kb/TS2715
    http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNP588EQ&updid=4526&osid=28
    With that stopped you can add the music back without fear of this happening again.

  • ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide

    iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

    Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device?  If so, keep in mind that Apple's servers may be experiencing a heavy load right now.  They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

Maybe you are looking for