ITunes 9 does not work when opened.

I first installed iTunes at iTunes 8, but when I upgraded it to iTunes 9, it started having problems. At first, it was running smoothly, but now, whenever I open it, iTunes freezes, and if I try to close it, my computer always keeps saying it is not responding. Whenever I plug in my iTouch(2g, 8gb, 3.1.1), iTunes never opens automatically anymore. I've tried reinstalling it a couple of times, but it still keeps having the same problem happen. Now, I can't sync anything from my iTouch to the computer anymore ):
Also, it doesn't crash or anything when I open it. No error messages. It just stays there and I can't click anything. I have to alt-4 it, then the error message pops up.
Message was edited by: carolinebeast

Opening it from the applications folder end up with the same behavior.
I was finally able to get iTunes 9 to start by doing the following:
1. Turn off the machine
2. Remove iPod from the dock (3rd Gen iPod with Firewire dock)
3. Restart the system
4. Start iTunes 9
My guess is iTunes is trying to do something during the first start up that crashes while trying to talk to the iPod in the dock.

Similar Messages

  • Write to Spreadsheet vi does not work when opened on my laptop.

    Hello,
    I have a very simple vi that collects data and writes to a spreadsheet. It works perfectly on my desktop computer but when I open with my laptop it does not write or give any indication that it's working.I know the vi is running but nothing happens. When I stop the vi it takes a moment to do anything and then at the top left corner it displays "Resetting Vi" and finally turns off.
    Both computers have the same operating system and Labview edition.
    I checked the vi properties and the labview options and both computers appear the same.
    Any help would be greatly appreciated.
    Thanks

    I have no idea why your vis would do that, but I have developed LabVIEW to Excel vis that seem to work pretty well.
    Why don't you try them and tell me how it goes?
    There are 5 Sub VIs that interact with Excel and one example VI that shows one way they can be used. They're in a winzip self-extracting archive set to extract them into an 'Excel' folder on your desktop.
    Use the example VI first. Type in the path of an existing workbook, or just 'Book1', the name of the sheet or just 'Sheet1',the excel cell address, and the corresponding desired cell value in the appropriate control and run the vi.
    Start Excel opens and returns an automation reference to Excel. It sets the visibility of Excel to the specified Boolean state, sets the window state to Maximized,
    Minimized, or Normal, and if there is no open workbook, it creates a new one.
    Get List of Excel Workbooks accepts an Excel Automation Reference and returns an array of workbook names.
    Set Cells in Excel Worksheet accepts an Excel Automation Number, a Workbook name, a Worksheet name, an array of Excel cell references (in A1 format), and an array of values corresponding to the cell references. After checking for the existance of the workbook and worksheet, it loops through the cell references with the 'Set Excel Cell to Value' VI.
    The Set Excel Cell to value VI takes a OLE Excel Worksheet reference, a cell address and a value argument. It checks the cell address with the 'Check Excel Cell reference' VI, then sets the value of the excel cell to value.
    The Check Excel Cell Reference VI checks the cell reference for validity. Cell columns may range from A to IV, and cell rows may extend from 1 to 65536. It converts A1 references to R1C1 references and returns a Boolean True if
    the address is good.
    Attachments:
    excel.exe ‏162 KB

  • Itunes does not work when I want to play Mp4 videos with most recent versions

    When I want to play videos with mp4 format on itunes, it does not do anything and I have to close itunes with the windows system manager. Does any one know how to solve this problem? I did not have this isue with 10.5 and previous versions of itunes.

    I found the solution, the problem was the encoding of the configuration files.
    I put:
    => Encoding: UTF8 without signature
    => line endings: UNIX(LF)
    And now it works :)

  • ITunes does not respond when opening, but works in safe mode

    Hey there
    So over the last two days or so, my ITunes (Latest version 11.1.4.) on MacBook Pro opens fine but then as soon as I click whatever, it gets stuck on the spinning wheel. I have now read that you can open it in Safe Mode by shift-option-command and click on iTunes on the desktop, which works fine, but is not the ultimate solution.
    Would you please have any suggestions as to what I can do to fix this?
    Thank you very much already!
    Kristin

    (It may be reacting badly with the new iTunes version, even though it's been okay with earlier ones.)
    b noir, just to confirm - the "Quartz Composer Visualizer.bundle" is working very well on my Mavericks MBP with 11.1.4. Only the Music Visualizers bundles, that need iTunes to run 32bit mode, will no longer run in iTunes 11.1.4.,  e.g. the iVisualize bundle and the visualizers "Be Composed", etc.
    Perhaps is something in the iTunes Visualizer folder, that uses quartz filters requiring advanced features of the graphics card, and therefore disabled in Safe Mode.

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

    the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

    Did you do a software update?
    AppleTV is unable to start properly.  You need to connect to a computer running iTunes as detailed here:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps.  It also has stop work when trying to down load new Apps.  Any suggestions out their???

    For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps.  Everything else seems to work.  Any suggestions out their???

    I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working.  My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads.  I have checked into my ITunes account and the ID and password are correct  and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work.  My problem seems to be just with trying to use my ID and password when wanting to download new books or apps.  I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel.  This message appears usually ten minutes after I have tried to make a purchase.  At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen.  Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

  • Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

    Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

    Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
    Here is the Apple support article that may help you.
    http://support.apple.com/kb/TS1717
    or my usual solution for Windows Users.
    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck!

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

  • Windows Vista and iTunes does not work

    First Time sorry for my bad English, I'm from Germany and my English is not the best.
    I have the new Windows Vista but iTunes does not work good.
    And I have to use it, to manage my music on my iPod.
    When there will be a Vista compatibles Version of iTunes??
    And when will come an 64-Bit Version?
    Thanks for Help,
    Karsten

    iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
    The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
    Anyone else having a problem with VISTA recognizing burnt media?

  • ITunes does not start when I plug in my iphone after I upgraded to Lion?

    iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

    http://support.apple.com/kb/TS1538

  • Itunes does not work me in the pc

    itunes does not work me in the pc, it gives me an unknown error 0x80090330

    I "fought" for more than three months with a problem concerning the iPhone 3G. The operator did not introduce any amendments, and the error was corrected in time with the new software provided by Apple.
    This time, Orange is also not able to improve anything. It seems that only Apple can do something about it.
    On the Polish forum for Apple products, is a topic devoted to this problem.
    http://myapple.pl/iphone-rozmowy-ogolne/150531-w-iphone-4-orange-rozmowca-nas-ni e-slyszy.html
    Paste link in order not to be groundless.
    Once again, I will describe exactly what the problem is.
    During a conversation in a 3G coverage, I no longer hear the caller at a time when 3G coverage is lost and there is a change to the Edge.
    By about 10 to 15 seconds the caller does not hear me. Once again, this time the caller hears me and the conversation can be conducted smoothly on Edge.
    I would add that in other phones, as well as the iPhone 3G, switching from 3G to Edge is smooth and without any disturbance - the same network.
    Message was edited by: Reaper123

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • Reply to all using ItemReply does not work when specifying messageid

    Hello everyone,
    I am trying to use the ItemReply token to perform a "Reply to All"
    action on a mail item with a known message identifier and include the
    original message text in the response. According to the documentation,
    the call should be:
    ItemReply(7;1;"message-id")
    Still, when I execute this token, apparently only a normal reply action
    is performed because only the original sender is listed as recipient.
    (The message text is properly included)
    However, when I manually select the message in the GroupWise client
    first and then execute the same call without specifying the message id,
    all recipients of the original mail are listed in "To:" as expected:
    ItemReply(7;1)
    Could it be that the "ReplyTo" parameter is ignored or does not work
    when a message id is specified as parameter? (Setting "IncludeText" to 0
    does not change anything)
    Thanks in advance and best regards,
    Peter Hofer

    Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
    According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

  • How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    Create a group and send mail
    http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Best.

Maybe you are looking for

  • Synchronisation dosen´t work

    Hello... I´ve installed the new PC-Suite 6.82.22.0 for the Nokia 6230. Everything works fine (sendig file etc.) but the synchronisation of the calender and contacts doesn´t work. The PC-Suite knows the phone via Bluetooth or USB but after two seconds

  • Java source version compare

    How do you view the code differences for .java files versioned in a web dynpro project?   They are not in the src fiolder for either active or inactive DC.  I do see they are under the gen_wdp folder but the version tools are disabled there. This I a

  • Not Breaking the loop but how to continue with the next iteration in a For

    Hi all i have the following piece of code Please let me know, what is the /*some construct*/ which will not break the loop but goes to the next iteration skipping Login b Loop Login A /*some construct*/ Login B End loop; P.S I should do this without

  • Slow wireless printing?

    I have a new HP officejet 8600. When I print wirelessly with my MacBook Air it does so quickly, but my Mac book is slow.  Why?

  • Lookout limitation​s and selection of the computer system for lookout

    This is regarding the limitation of the lookout i.e. upto how much IO lookout is reccomended to use. or it is on the basis of the l4p or lks file size basis. Do you have some criteria for the selection of the computer system for lookout on the basis