ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

Similar Messages

  • My Home Sharing does not work any more after latest iTunes update

    After iTunes update to 11.1.3 my Home Sharing does not work any more!
    It worked just fine for several years...
    I tryed to do everything I could find on Apple support... NOTHING works.
    Most of Apple so called updates turn out real crap...
    I am wondering whats happening to Apple?...

    Hello igor_rena,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Best of luck,
    Mario

  • Updated itunes now home sharing does not work

    i updated my itunes from 10.2 to the new 10.3 but now my home sharing does not work. the apple tv can not see the computer..my apple tv has the latest updated software as well. any help would be appreciated.. this seems to be an on going thing with apple lately where updated software causes more hea

    Troubleshooting Home Sharing
    Troubleshooting Home Sharing with Apple TV (2nd generation)

  • Home Sharing does not work. It's time for Apple to act.

    My specific question: Does anyone from Apple read these discussions *and* use the information to fix iTunes?
    My issue (and I've given up on this): Home Sharing does not work and it needs to be fixed. I use a Windows 7 based PC and can successfully access my iTunes library from my iPad, meaning all network requirements are met. However many artists and albums do not appear. I know this is not about the tagging/data for the albums.
    I found recommendations in these forums regarding the iTunes database (.itl), that this is a sign that the database is corrupted, and how to re-create it from the xml version. I used this technique and it did fix the problem - all albums and artists appeared. But within a day or so, they disappear again, meaning the .itl file is corrupted again and has to be re-created again. Also - if the .itl file is corrupted, then why does everything appear fine in iTunes? Somewhere, somehow the data are good enough to make iTunes work properly.
    Bottom line: If you can't get the basics right, then Home Sharing does not work. Some very helpful forum commenters said it could have something to do with the anti-virus software, but that is just passing the buck.  I should not have to know how to do all this. I should be able to turn on Home Sharing and enjoy the music from my iPads, iPhone, etc. Imagine you have to know how fuel injection works and be able to fix it every two days just to use your car - you should be able to turn the key and drive.
    There are more problems - I won't even get into how the album won't display properly on the iPad and other annoyances.
    Apple? Are you listening? Home Sharing does not work. It is the opposite of the image projected of easy-to-use, people-friendly products.
    I suggest you either make it work or turn off the feature.
    Joe

    If your database is constantly becoming corrupt, you have a problem on your computer, it is nothing to do with homesharing. The corrupt database does not affect iTunes because that uses another file. It's not passing the buck, by considering whether anti-virus software might be causing this, this is the sort of stuff anti-virus software does (although I'm not saying that's what it is in your case-I don't know at this stage), you can't hold Apple accountable for badly written software that you have put on your computer yourself.
    If you can't correctly identify what is causing your problem, you are never going to fix it.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

    I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
    On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
    I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
    I deactivated home sharing on both machines and enabled it again. It still does not work.
    On both machines iTunes displays the the library on the left side but like said it is not accessable
    With Finder I can access the other computer from both machines without any problem.
    Any help to solve this would be very much appreciated

    first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
    @ least turned if off for troubleshooting purposes.
    turn home sharing off on both computers, and make sure
    (a) both Macs have access to the internet
    (b) iTunes on both machines is authorized for the same iTunes account.
    turn home sharing back on on both Macs.
    does it work ?
    JGG

  • Windows 8 home sharing does not work anymore

    look iv'e tried it all .. every suggestion in the book , ethernet settings i have windows 8 and now home sharing no longer works,
    i'm so frustrated now, please don't ask me to repeat anything you've heard ar tried before i've tried ir
    clean up .net
    turn off ipv6
    reinstall itunes
    i've always had apple products and i really feel i'm at the end now. as soon as you upgrade something apple .. it hurts you, why o why do they do this??? my mind just boggles,
    "lets make it crapper!!!" thats what they say at upgrade meetings,
    no music throughout my house now, so annoyed,
    i'm moving to nexus tablets phones and chromecast, i really have had it wasting my time fixing apple's crap that worked fine till i "upgraded"
    sorry for rant just at the end of my tether

    Home Sharing works once after I start iTunes on the Mac.
    Next time I want to watch a film, it justs hangs and says it cannot connect to my iTunes library.
    I have the same issue on 5 ATVs round the house (some wired some wireless), I have tried fixed and DHCP IP addressing, I have moved the Mac to be on the same switch as one of the ATVs and  the problem is still there.
    I have tried a different Mac running Mountain Lion and the same thing happens.
    At the moment in order to watch a film I have to use Remote Desktop to log onto the Mac and stop and start iTunes then the ATV sees the library. Watch film. Move to other room, fire up ATV no library, use Remote Desktop, rinse and repeat....frustrating isn't the word.

  • Home sharing does not work with apple tv

    Can anyone help me.  I used to be able to stream all content from my home master computer to my Apply TV.  Now it suddenly does not work.
    Apple TV itself works just fine.  I can also airplay using it with out IPADs.
    I have uninstalled and reinstalled Itunes.  Reset the modem/router.  Reset Appletv.  Tried with Norton disabled.  etc.
    Nothing seems to work. 
    I keep getting the 'Turn on your home sharing in Itunes' message.   But it is on.
    Help is appreciated.

    Welcome to the Apple Community.
    Sometimes just disabling Norton isn't enough, you may need to hunt down every last file it has written to your computer then re-install iTunes. I understand Norton can be quite a nasty little intrusion.
    I know very little about PC's or security software as I have neither, but the following article might help you.
    Troubleshooting Security Software

  • Oracle Database Express Edition 11g Release 2: Does not work in Windows x64

    Hi
    I download a year ago oracle 10g and installed in windows7/64bit.
    Then I messed up my computer. So I had to reinstall from scratch.
    oracle 10g seems to be not available anymore.
    Now 11g is available. But it says does not work in x64.
    Can somebody explain this?
    Thanks
    Beat

    Hi, and welcome to the OTN forums!
    I download a year ago oracle 10g and installed in windows7/64bit.
    Now 11g is available. But it says does not work in x64.Well, in fact, 10.2 XE wasn't certified for x64 either, not even for Linux x64...
    11.2 XE has a Linux x86_64 release, and there has been an announcement that there'll be a x64 release for Windows as well, but it's not available (yet).
    There have been a lot of reports that people got 11.2 XE work on x64 Windows machines as well, with a few tweaks at installation time and/or afterwards...
    You'll find tons of posts on that topic when using forum search...
    oracle 10g seems to be not available anymore.Right, the official downloads have been removed after all database 10.2 releases fell out of (regular) support.
    -Udo
    Edited by: Udo on 15.04.2013 21:48

  • Home sharing does not work in iTunes 9??

    I have spent hours going through this and conclude there must be something up with home sharing in the latest iTunes - I had no problem with it previously.
    I have everything checked that should be checked, my iMac and MacBook are on the same local wireless connection and it's fully functional. I can manually transfer files if I want.
    File sharing is on, home sharing is on in iTunes and "share entire library". "Look for shared libraries" and "share libraries on local network" is checked in both computers. I am logged into the iTunes store on both computers.
    But there is no shared list in either machine, and in iTunes > Preferences it says "No users connected" - even though both computers are connected to the network. And it makes no difference if I log in to one or both computers and mount the volumes or not. Nothing will make it work. Rebooting, quitting iTunes, switching home sharing off and then on again, clearing out all my old passwords in Keychain... nothing. Any suggestions welcome.

    HALLELULAH!
    Well thanks to everyone that tried to help with this. I can't believe it has taken me two whole weekends to sort this out. And yes I did go to my local Apple store but they said that everything I had already done was what they would have suggested - they were interested to know as well.
    Pretty sure this is not any fault with iTunes. What I had to do, finally, was completely wipe the HD of my MacBook, clean install the original software, register it, update it, reinstall all the other software I needm register and update it, reset iSynch, Mobile Me etc. etc. Finally, after everything else was done (about 12 hours work), I imported all my music and playlists into iTunes, fired it up - and the Home Sharing worked straight away first time!!!!!
    Peculiar thing is that in iTunes > Preferences > Sharing at the bottom of the window, it still says "Status: no users connected" on both computers". Even though the Home Sharing is on and running and the shared libraries are all visible and working. Unless that's something to do with password settings, I don't know (I don't use any password setting on iTunes sharing as it just "I, me and myself"). But I don't care, IT WORKS!!!
    Along the way I also reset my router a couple of times, but I think the route of the problem (no pun intended) was not that. What I would definitely very strongly recommend to anyone is, whatever you do, don't use Migration Manager to copy all of the stuff on your desktop computer onto your laptop (which is what I did a week ago after installing a new drive and more ram so I can run Logic Studion on the MacBook). Doing that caused the most incredible problems, of which Home Sharing turned out to be the least. All kinds of weird stuff was going on and the MacBook became increasingly degraded in performance, the network was going nuts, until I was forced to take the drastic steps above. The solution was to start again (NOT with Migration Manager) installing everything from DVD or manually dragging it across item by item, registering and updating... hence the ludicrous amount of tme I have just spent on this.
    It's great when it works

  • Home sharing does not work with iTunes 12

    I have been using home sharing with iTunes a lot, mainly to stream TV shows from my Mac Pro (2008) to my Apple TV (3rd Gen). But after installing Yosemite and iTunes 12 it doesn't work any longer. My Apple TV finds the iTunes Library, but can't connect with it. At the same time home sharing worked just fine with my iPhone 5 and iPad 2 (iOS 8.0.2). After installing iOS 8.1 home sharing with my iOS devices doesn't work, too – same problem as with Apple TV: iTunes library is found but devices can't connect with it.
    I already tried to solve the problem with the suggestions on Apples troubleshooting page:  Fehlerbehebungsmaßnahmen für die Privatfreigabe
    My setup:
    Mac Pro (2008) with OS X 10.10 (14A389), iTunes 12.0.1.26, connected via Ethernet and WiFi
    Router: Fritz!Box Fon WLAN 7270
    iPhone 5 with iOS 8.1
    iPad 2 with 8.1
    Apple TV (3rd Gen), newest software update, connected via Ethernet
    Any ideas, what the reason for that problem could be and how to solve it?
    Thanks a lot in advance.
    BTW: Sorry for my English. I am not a native speaker.
    Greetings from Germany

    I had the same problem after updating to iTunes 12 and using my iPhone 6.
    I have solved it by doing these simple steps:
    1. Turn off Home Sharing in iTunes. Close it.
    2. In your iOS 8 device, Turn on Home Sharing: Settings/Music/Home Sharing
    3. Open back iTunes
    It looks like in one of the updates, possibly iOS 8.1, had signed off Home Sharing completely.

  • Home sharing does not work as standard windows user

    I have two computers in my home network - Windows 7 Professional Desktop and a Windows 7 Professional Laptop.
    Both running latest itunes 11 software.
    Win7 Desktop has two accounts: Administrator and JB (a standard user)
    Win7 Laptop has two accounts: Administrator and JB (a standard user)
    Home Sharing is enabled on both using the same apple ID.
    I can log in on the desktop as JB/standard user and see my apple TV.
    I can log in on my laptop as JB/standard user and do NOT see my apple TV ( the airplay icon is just missing).
    Additionally - I do not see "shared" libraries on either machine.
    On the laptop, if i open itunes by "run as administartor" I am then able to see the other "shared library" and ALSO see the apple tv Airplay icon.
    Not able to figure out why I cant see home sharing or the apple tv Airplay icon unless I run as an administrator on the laptop.

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • Music home sharing does not work for my ipad1 since my last itunes update.

    This used to work, but since I updated itunes on my computer a few months ago, I cannot see the shared library on  my ipad. My ipad runs iOS5, and my computer has itunes11. I have tried all the tips in the support section. Tonight I saw the shared library under MORE while e ipad was linked to the computer via USB. As soon as I disconnected the cable, I lost the shared library.
    The WiFi connection is fine, however. I am using it now to connect and ask this question.
    Furthermore, why does my ipad not see my itunes music on the cloud? My work computer is logged on to my mac account and can play my music there, but my ipad cannot see the cloud or do home sharing anymore. Is this a strategy to force me to buy a newer ipad?

    Hi Wink65,
    If your iPad is not able to see the Home Sharing music, I would recommend trying some steps in this article:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Specifically, I'd pay special attention to steps 3 and 6, but a full run-through of the article would be the most thorough.
    Cheers,
    - Ari

  • ITunes/Music Home sharing does not work on my iPad Air

    No matter what I do I cannot use Music.app on my iPad Air to play music from my iTunes Library with Home-Sharing switched on. The Library name correctly appears in the Music.app source list after the loading symbol takes an age to complete. When it appears to have connected to the Library on my Mac, contents of my Library are shown in the app but I cannot play anything. If I select an albumn and press Play the Music.app merely cycles rapidly through all the track titles of the Album and then stops. Nothing plays. I've tried dozens of times to get this to work, even rebuilding my iTunes Library. Nothing seems to cure the problem. I can connect and play via Plex which is just plain daft seeing Apple designed all the software/hardware but they, themselves, cannot correctly code for this basic functionality.
    Also, not all Album cover artwork is displayed correctly.
    It seems many of the things I bought the iPad for are non-functional and the tablet is virtually useless. I can't beleive Apple would produce software and hardware which is specifically made to work harmoniously but obviously doesn't.
    Any help, here, please?
    I'm also having problems with Bluetooth connecting to my Mac Pro (2008)... Namly, it will not.

    Understanding Home Sharing
    http://support.apple.com/kb/ht3819
    Setup Home Sharing on iPad
    http://support.apple.com/kb/ht4557
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972

  • Home Sharing does not work anymore

    I have Lion, iTunes 10.4, Apple TV2.
    The Home Sharing connection with ATV2 breaks up after a few minutes.
    The Remote app on both iPhone and iPad won't get connected thru Home Sharing to my iTunes.

    Thanks for the input Jolly, but let me clarify.
    I mean OS X (10.5.8) on my mini, I messed up when I said .4. As well as on the winblows 7 machine. Once ATV and iTunes were updated to the latest and greatest, everything that flawlessly worked immediately prior to the updates stopped working immediately after the updates. And FWIW, only one machine runs iTunes at a time, and 99.9% of the time it is being ran on my Mac.
    Unless Apple changed the ports and protocol it was using on the ATV, the problem does not lie in bonjour, spotlight, the firewall or anything else related to my network or software settings.
    The ATV and all machines were deauthorized, and re-authorized. home sharing was turned off, then back on on all machines. The only thing I can not do is hardwire the ATV to my network. So I have no option but to use the WiFi feature. And even over wireless, I have no problem accessing the iTunes store, NetFlix, You Tube, etc on the ATV after the latest and greatest update(s).
    Only have two things left to try. Use a static IP, and/or reset the ATV.
    And the link you posted, I used the information in there to make iTunes work when I initially set up the winblows box. So how is following those instructions again when all the steps have been already completed, and again verified after it all stopped working going to help? Same goes with the link to troubleshooting the my Mac.
    Again, everything has been verified, tested and tried again and again.

Maybe you are looking for

  • Web service handler could not called in client web service

    Hi All, I have two web service ServiceA & ServiceB and both implemented in weblogic. The ServiceA is SSL enable and protocol is https which is not published by me. The ServieB is my web service(wls8.1) and act as client for ServiceA. My problem is wh

  • Order By clause in Receiver JDBC adapter

    Hello All, Is it possible to construct a select statement that uses an Order by clause in JDBC receiver adapter? ex : I would like the JDBC adapter to from a query as follows: <b>Select * from EMP where sal = 10000 order by empid</b> We are able to c

  • Roaming Network Problem

    Hi everybody In my home I have setup a roaming network using the following base stations: AirPort Extreme connected to modem over ethernet - creates a wireless network AirPort Express 1 connected to AirPort Extreme over ethernet - creates the same wi

  • Delete from HD bypassing recycle bin

    LR v1.1 & Vista. Files deleted using LR's delete from HD are not being placed in the recycle bin but instead disappearing completely? Is this the designed behavior? If so, I don't find this to be desirable. If it isn't the designed behavior is it a b

  • Se80 can't write FM code

    Hi, everyone. I have an issue in se80 code editor in change mode. My user has a developer rights(SSCR key). I can create new FM ,Groups, and other staff, and I can also modify parameters and atributes . So I've created a new group and new FM in se80,