ITunes 9 Mini-Player and search option

Before I downloaded iTunes 9 and was running all my music through iTunes 8, I was able to search for keywords and that became the playlist. I switched to Mini-Player and it continued endlessly through this selected search. I am not able to do that with iTunes 9, I search for songs, switch to Mini-Player and the search somehow escapes itself and starts playing my whole Music listing of songs.
Is anyone else having this problem?

I have this issue, both on my computer, and on my girlfriend's Macbook Pro. Prior versions of iTunes would constrain its Shuffle to within my search results when using the Search function in the upper right corner of iTunes. 9.x basically ignores the search results, and shuffles within my entire library. There doesn't seem to be any way to fix it, as there are very limited "shuffle" options in the Controls menu.

Similar Messages

  • ITunes v8 mini player

    I went to Advance settings to switch to mini player and its not there anymore. Then I went into Preferences and didn't find any options to turn on the mini player. Where did it go in in v8?

    Oh, how sorry you are gonna be, apple. Another day, when you have disappointed with iTunes big time:
    Mini player in "advanced" menu,
    moved to "view" menu,
    with crappy help not finding "mini player" whatsoever,
    having me search Google only to find how on earth miniPLayer is turned "on" (I mean, "turning ON" miniplayer?) and not plague my taskbar nor system tray
    not working without latest quicktime (which ***** loads also),
    having no mousewheel support for volume setting,
    being obese on my sys resources,
    taking over "default player" setting by default
    Not to mention the trouble I had to write this single little post with all the registration needlessness.
    Uninstalling...
    d

  • 8.1 Mini Player drops searches

    Just upgraded to 8.1 for windows. When I do a basic search in my music library (say for an artist) and then start playing and put iTunes in Mini Player mode, after a couple of tracks, it drops the search. It especially does this when I jump back out of mini player.
    Anyone else see this? Any way to downgrade?

    Same issue here. I know I've done this in the past without issue so it must be an 8.1 issue.
    I can do a search in the library, play with shuffle on and press "next" hundreds of times never leaving the search results. But after switching to mini mode and pressing "next" only a few times iTunes plays random songs from the library which no longer fit under the searched term(s). After restoring the iTunes window I can see that the search field has been cleared.
    Hope they fix this in an update soon.

  • Controlling within mini-player clears search field - annoying bug

    I've come across this annoying (repeatable) bug with iTunes 9... when I listen to music, I like to put an artist's name in the search field, then just let it play on shuffle from those search results. Typically no big deal, however, if I switch to the mini-player, then use any of the controls (play, forward, back) on the mini-player, the search field gets cleared out and it's just playing through the entire library. It's annoying to have to re-enter what was in the search field when it clears like this.
    Does anyone else have this issue? Is there a way to fix it? So far I'm just being careful not to touch the controls in the mini-player while listening to a selection narrowed down from the library with the search field.

    wishnias wrote:
    Is there a way to fix it? So far I'm just being careful not to touch the controls in the mini-player while listening to a selection narrowed down from the library with the search field.
    As a work-around, there is a freeware program that allows full iTunes control from the OS X menu bar which will avoid the need for using the mini player. You can close the iTunes window while leaving the program running and your search will remain intact. Get it here: http://www.apple.com/downloads/macosx/ipod_itunes/youcontroltunes.html

  • How do I enable scrubbing in the iTunes 11 mini player?

    How do I enable scrubbing in the iTunes 11 mini player?  I don't see a bar or any way to manually skip to the part of the song I wish to play.

    I did notice this: If you click on the album cover artwork squre, yet another window opens—a square, frameless window that shows a scrubber when you move your mouse over it. There's still no way to just glance at the window and see your current position within the track, though. You have to hover your mouse over that square window (which lacks an obvious name within iTunes).

  • Webinar: Understanding TREX Indexing and Search Options

    <b>SAP NetWeaver Know-How Network Webinar: 
    Understanding TREX Indexing and Search Options
    Wednesday 25 August 2004
    11 a.m. EDT</b>
    On Wednesday 25 August, Larry Brambrut, an EP RIG Consultant, hosts the webinar titled  <b>Understanding TREX Indexing and Search Options</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
    Here’s how Larry describes his webinar presentation:
    “This session will describe the enhancements to "Search and Classification"(TREX) in NetWeaver '04 and EP 6.0 SP2 Patch 6. The session will include a discussion of the CM enhancements such as new crawlers, new search UI options and plug-ins, and TREX enhancements such as the new TREX architecture, delta indexing, and new TREX Admin Tool.”
    SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
    <b>How to Participate</b>
    (Please go to the SDN webinar schedule page to find more information)
    Dial-in Information:
    Date: Wednesday 25 August 2004
    Time: 11 a.m. EDT
    Within the U.S., call: +1.888.428.4473
    Outside the U.S., call: +1.651.291.0618
    Password: NetWeaver04
    WebEx Information:
    Topic: SAP NetWeaver Know-How Network
    Date: Wednesday 25 August 2004
    Time: 11 a.m. EDT
    Meeting Number: 742391500
    Meeting Password: netweaver04 (lowercase)
    WebEx Link: sap.webex.com
    Replay Information:
    A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720155.
    Toll-free: +1.800.475.6701
    International: +1.320.365.3844
    <b>
    About the SAP NetWeaver Know-How Webinar Series</b>
    The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
    <b>Disclaimer</b>
    SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

    Hi there,
    I just read this thread, and maybe someone here can answer my current trex question:
    I have created an ordinary CM repository, and created an index with this repository as source. Now the problem: I would like to exclude files in the repository with specific mimetypes from the TREX indexing process.
    I have verified that the TrexValidMimetypes.ini does not contain any reference to the Mimetypes I'm creating, but never the less, the document titles are searchable and are returned when searching.
    How do I get around this issue?
    Is it possible in NW04 or EP6.0 SP3 PXXX??
    Regards,
    Hco

  • ITunes mini player and Spaces

    I am a big fan of using Spaces to clean up my workflow, but I have one minor quibble/question. I would like to display the iTunes mini player (the one you get by pressing the green button in iTunes twice) in ALL of my spaces. That way I can pause, fastforward, etc no matter what Space I'm working in.I don't really want to assign iTunes to ALL spaces to accomplish this. Any thoughts?

    There are a number of utilities that will put Icons for Rew|Play/Pause|Fwd on the menu bar, or you can use the keyboard on most modern Macs with designated assignments for these functions on F7, 8 and 9.
    Not exactly what you want, but like you, it's what I have to make do with.

  • Mini Player Clears Search Results

    If I perform a search in iTunes (e.g. for an artist), and then switch to the mini player, iTunes will continue to play music only from my search results.
    If I press the Next or Previous buttons on the Mini Player, the first time I press the button, the song will also be from the search results. Each press after that (or if I allow iTunes to finish the track) will bring songs NOT from the search results, but from my whole library.
    Has anyone else experienced this? Does any one know a way to resolve the issue?

    After you search for the artist, *Ctrl click* the arrow after the artist name to see all items by that artist in yoru library, then play and open the mini player.
    Better yet, instead of search, simply turn on the browser (iTunes menu View -> Column browser) then select the Artist to see everything by that artist.

  • HT1347 ipod touch, updated itunes, only mini-player shows on screen

    I bought an IPod touch 64 tonight because my old 60Gb died.  Plugged into my computer and fired it up.  I also updated my ITunes software at the same time.
    Now I only see my mini-player screen and not my library screen.  I know I changed something to have my mini-player on top but now I can't see anyway to undo this. Help?
    James

    So as far as I read... you are having a prob restoreing you iPod with a Unknown error of (1603) guess what you are in luck this happen to my and some of my costomers so here are the steps to force you ipod to restore (recovery Mode) and update you iPod Touch...
    1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
    2. Disconnect the USB cable from the iPod touch.
    3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
    4. Press and hold the Home button while connecting USB cable. When you reconnect USB, the device should then power on. BUT DO NOT LET GO OF THE HOME BUTTON
    5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo.
    6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message: "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes
    Note: once you put the Ipod Touch in recovery mode you can not take it out of this mode
    You must restore the iPod that means everything on it (songs, photos, videos) will be deleted

  • ITunes Crashes - Mini Player & Genius

    Relaunch iTunes after quitting while on a Genius Mix in the mini player. It starts back up in the mini player mode. Click the Play button, and iTunes crashes.
    The workaround is to switch to the full player before hitting Play.

    Relaunch iTunes after quitting while on a Genius Mix in the mini player. It starts back up in the mini player mode. Click the Play button, and iTunes crashes.
    The workaround is to switch to the full player before hitting Play.

  • How to use auto-increment and search option for MS Access DB

    Dear All,
               I have configured our invoice in Adobe Livecycle and connected it to MS Acess 2007 as per http://forms.stefcameron.com/2006/09/18/connecting-a-form-to-a-database/.
    All is working fine, I can insert, retrieve data from DB to invoice and vice versa.
    Now I want few things to be implemented on our invoice.
    When ever I open our invoice, it populate the first entry from DB, Is it possible to populate the last entry ?
    Auto increment invoice number from MS Access DB every time we open our invoice after save.
    How to implement search option from DB for invoice number ?
    Please let me know if someone can provide me help on my scenario, so that I can share more stuff related to invoice and DB.
    Look forward to hearing soon from experts and other team members.
    Thanks & Regards
    Riyad...

    As far as I know there is not any auto increment data type in Oracle. Instead of this you should create a sequence and get the next value of the sequence while creating a row in your table.
    CREATE SEQUENCE Test_Sequence ;
    CREATE TABLE Test_Table ( Id NUMBER , Foo VARCHAR2(4) ) ;
    ALTER TABLE Test_Table ADD CONSTRAINT Test_Table_PK_Id PRIMARY KEY ( Id ) ;
    INSERT INTO Test_Table ( Id , Information ) VALUES ( Test_Sequence.NEXTVAL , 'FOO' ) ;

  • Adobe flash player and deinterlace option

    Hello!
    I get tv (h264/ts) from satelite, then, with wowza server, send it to flash player. (use rtmp).
    On picture I'm can see interlace.
    Adobe flash player has deinterlace option or I can solve this problem with my encoder?
    Sergey.

    It seems that going to Preferences>Security> Check allow plug ins, then manage sites, and then allowing one site allows all??? Seems like a lot to go through.  I have installed the player 4 times now and just got it figured out!

  • PLAYLIST order and SEARCH option

    how do i get the playlist to play songs in a specific order
    i have renamed all filenames and idtags and still they come in chaos
    and another thing: SEARCH option
    newer ipods come with the search option (as i read at apple site). i updated my 30G 5th generation ipod to the newest software and didnt get that option. is it possible to get that?
    thanks
    oh by the way, im new here and this is my first post!

    how do i get the playlist to play songs in a specific order
    i have renamed all filenames and idtags and still they come in chaos
    If you are really referring to a "Playlist" then simply physically move the music into the order your want it played. If you are really referring to a "Album" here, then assign a "Track" order in which you want them played.
    and another thing: SEARCH option
    newer ipods come with the search option (as i read at apple site). i updated my 30G 5th generation ipod to the newest software and didnt get that option. is it possible to get that?
    Sure, buy one of the new iPods. This is a new hardware featue -- not a software feature.
    oh by the way, im new here and this is my first post!
    Welcome to the discussions forum.

  • Editing tools and search option stopped working after IOS Update

    Hi All,
    Since the last IOS & Adobe Reader Update I have been unable to edit or search within existing PDF using the Adobe Reader iPad App.   I have noticed the document now shows as protected on the Iphone Adobe Reader App but does not give me any option to unprotect it.  Please bear in mind I have been editing this document for over 6 months now and the document shows my previous annotations.
    Any ideas on how to resolve this issue? 
    Many thanks
    S

    Hi Sue,
    Yes, we received your PDF document via email.  Thank you!
    I can confirm the following:
    Your PDF document is not encrypted or locked by password.
    This is a defect in Adobe Reader for iOS version 11.6.4 (or possibly all 11.6.x versions) for the particular type of PDF documents like yours. (The problem does not happen with all PDF documents.) The tools/areas that are affected by the defect: Search, text selection, text markup annotations (highlight, strikeout, and underline).  However, you can still add other types of annotations, namely sticky notes, free text, and freehand drawing, to the PDF document.
    The defect has already been fixed in our internal build for a future release.  (I was able to add highlight/strikeout/underline and search text in your PDF document.) Unfortunately, I am not able to speculate on the next release date.
    Sorry for the inconvenience. We hope that you switch back to Adobe Reader for iOS once the defect is fixed. 
    Thank you for reporting the problem!

  • IOS 7.0.2 - ITunes Manually manage music and videos option - all of my music has disappeared?

    Hi all - I clicked the above option because I was having issues moving tracks to my I-Phone.  Except now, ALL of the songs I have ripped manually from my old CDs previously have disappeared - ***?  I'm talking well over 800 songs!!!!!!
    I can't see them anymore in my IPhone or the Library, so assume they have gone.
    How the f*ck is this possible?  I didn't choose any delete option.
    Has anyone had this happen to them?  Guess I have to spend hours doing them all again.
    I-Tunes is an absolute joke - I've had issues with it since year dot.  So p*ssed off right now.
    Any help would be appreciated.

    Happened to multiple people and everyone blames different things. What they don't realize is that itunes, just like Windows Media player do not contain music. They just see it on the computer and allow to play. Music can only dissapear if was deleted from itunes or if itunes do not have access to library. There are multiple programs on Windows that can stop itunes from accessing library, example McAfee real time scanner did it 4 months ago and
    I don't know if that was ever fixed. So find that music and reimport that is all.
    iTunes: About the Add to Library, Import, and ... - Support - Apple

Maybe you are looking for

  • HTTP Receiver adapter error ?

    HI Guys, I have configured the IDOC-HTTP. I have defined a bsuiness service on the receiver side as the receiver is not in our landscape and he is our business partner. I have created a RFC connection of type G and it is working properly but the HTTP

  • Currency error - very urgent

    Hi Friends When I try to enter an order, this is the error that I get.... Statistics: The currency from in CAD for date 02/11/2008 could not be determined... Today only I'm getting this error...earlier I could eneter the orders without any errors...

  • How to turn off printer color management

    I've exhausted places to ask this question. Spent an hour with Canon without a definitive answer. I'm printing from Photoshop CS2. OS 10.5 Leopard. Canon IP3600 My colors are not printing as bright and are rather dull and somewhat dark. I have been u

  • CR XI SQLQueryString

    Post Author: mudEyes CA Forum: General Apologies for the General post but I haven't had any response from the Database and Connectivety forum. I need to get the SQLQueryString from a report at runtime in VB6. the syntax I'm using to do this is- varia

  • Firefox upgrade kept it a secret what, exactly was different

    I just checked to see if there was an update to Firefox V:5. The check said there was, but gave me no useful information about what was different. So I told the program to download the changes. It downloaded the changes, and promptly installed them w