ITunes 9 not seeing/playing Airtunes

I've got my iTunes Library on a G5 running Leopard. It can't see my Airport Express at all... there's no drop-down menu in the bottom-right corner of iTunes to allow me to select the Airport Express (and therefore the living room hifi) as an option. All this worked fine with iTunes 8.
Also...
With the above setup, I use my (wirelessly connected) iBook to remotely control the G5 from downstairs via Airtunes. This iBook is running Tiger... with iTunes 9, I get the "remote speaker" drop-down menu, but all of my podcasts are greyed out.

I have recently fixed a problem very similar to this.
I am running Windows XP Pro, with itunes 9.0.2.25
Symptoms: I discovered an album that had only one song listed. Nothing I could do would get the remaining songs.
Then I noticed entire albums missing. I tried importing the albums, and itunes made no attempt to do so, as if they were already in the library.
(I tried a lot more than this, believe me.)
Here is how I solved the problem. I downloaded an MP3 tag editor.
I got one here http://www.mp3tag.de/en/download.html
Using this software, I loaded my library and noticed that the song that would not load had a different tag ID than the one that did.
When I removed that tag, the correct tag appeared and then itunes loaded the song.
Then I did similar for an entire album, and the album loaded into itunes (when I import folder).
BUT BE WARNED.
Some working songs already use the older tags. What I discovered is that sometimes software such as Media Player place an overlapping ID tag, which confuses itunes.
Make sure to right click, copy tag, BEFORE removing a tag. If it strips all tag information, just right click, paste tag and return to original format.
Good luck with repairing your library, it took me hours.
But in doing so, I discovered that I had sometimes a whole album that was just missing a single song, so it was worth it.

Similar Messages

  • ITunes not seeing my iPhone4...

    This is prolly an old one, but here goes...
    Phone arrived yesterday, attempted so sync on MacBook pro (running Leopard), iTunes not seeing phone.
    Re-installed iTunes 9.2, everything fine.
    Today, attempting to do some more syncing, and, once again, iTunes has amnesia.
    What's going on here?
    Any help would be truly appreciated.
    Thanks.

    Just got my iPhone 4 today -iTunes doesn't see mine. Did your issue ever resolve? The phone says NO SERVICE. Was that your issue, too?

  • Rented a movie on my mac - trying to watch on apple tv (i think 2), but iTunes not "seeing" apple tv - so i can't 'move' the rental to the device.  ??

    rented a movie on my mac - trying to watch on apple tv (i think 2), but iTunes not "seeing" apple tv - so i can't 'move' the rental to the device.  i'm brand new at apple tv - do i need to enable it or something?

    Is it the little black box? If yes then it is the 2nd model. It won't show up in iTunes as there is no syncing involved. The only time it does is when you connect and need to restore the device.
    You need to enable home sharing in iTunes and on ATV

  • Itunes not seeing Ipod and songs not playing Ipod

    I have a couple of issues just wanted to know if anyone has run into. I have a couple of computer one running Vista, the other XP, neither see the ipod in itunes, both see it in Windows. That is the first problem. I have also tried all of the suggestions in the troubleshooting section of this support website, except re-installing the operating system. The other issue is that the ipod does not play the music that is currently stored on it, it acts like it is going to and then stops the screen turns black and the apple logo appears, any ideas?

    Hello betel23,
    Have you tried resetting the nano yet? To do this, toggle the hold switch on and off, then press and hold the Select (Center) and Menu buttons together until the Apple logo appears. I would try these more than once just in case.
    Otherwise, try forcing the iPod into *Disk Mode* using the instructions in this Apple support document. It may help your iPod mount as an external drive on your system as well as get it to appear in iTunes.
    http://support.apple.com/kb/ht1363
    B-rock

  • ITunes not seeing the library on a shared drive

    Greetings,
    I recently upgraded to iTunes 11. I upgraded the application on 3 computers. All computers (2 running Snow Leopard and one running Lion) have been authorized for iTunes and access a networked library. The upgrade was successful and and all computers "see" the correct shared library.
    My problem is with the unit running Lion. That computer has 2 users, myself and my wife. I generally do not use the computer, but I set up all the computers in the home, so I automatically create an account for myself. Early on I created and configured my wife's account to use iTunes.
    Recently, (after upgrading) I decided to configure iTunes for my account on that computer. (My regular computer is older and I need to start using the iPhoto application on her computer, mine has run out of space.) When I tried to run the new iTunes, my account would not "see" the iTunes library.
    Do I need to authorize (to use iTunes) this account, even though my wife's account on this machine was authorized awhile ago?
    Why would my account library be different from her account library (I have confirmed that the library file path is the same.)
    Ultimately I want to be able to use my wife's (newer) computer to sync our (3) iPads. Right now, under my account I am unable to do that.
    Any suggestions?
    Tim Kern

    sceptomaniac wrote:
    I have put the library on an external drive connected by usb to my wireless router.
    what exactly have you put on the external ? the entire iTunes folder or just the iTunes music (or media) folder ?
    On my iMac I can select the itunes folder on the drive in itunes advanced preferences and my music shows up in the itunes window an I can play it. But on my MacbookPro although I can select the folder, nothing shows up in the itunes window.
    this leads me to believe that you consolidated the iMac's library to the external but kept the library files local. pointing iTunes media folder location to a new spot tells iTunes where to put new additions to your library, but not where the current content is.
    what you need to do is to copy the entire iTunes folder to the external, then (on each Mac) launch iTunes while holding the option(⌥) key, click on choose library when prompted, and select the iTunes folder you copied to the external.
    note only one Mac at a time can access the library !

  • ITunes not seeing music

    I used to have my music on a shared computer.  That computer has since moved on with the music.  My library link is looking still to that location for the music.  It can't find it so naturally I can't play it.  I put all my new music in the user/music/itunes/itunes music folder.  iTunes cannot see that music, so I'm stuck. 

    Moving tracks from where iTunes expects to find them to somewhere else by hand causes problems. Ideally you would move the tracks that you do have back to where iTunes last knew where they were. My request
    "Select a single broken track, press ctrl-i to Get Info and say No when asked to locate the file. On the summary tab iTunes will report where it is looking for the file. "
    is designed to elicit the information on where the file that you do have, should be, with a view to getting you to slide them back there, at least on a temporary basis, then, if you want them moved, to move them in a way that doesn't break iTunes connection to the file. Reading between the lines however, I guess the location these files used to be on is on the shared computer you no longer have access to so lets try another approach.
    Download my FindTracks script and point it in the direction of the folder that has what media you do have. It should be able to repair the links of the tracks that can be found. FindTracks uses some fuzzy matching routines and searches for multiple potential locations. For more details see this thread
    Once that's done...
    Lost & Found
    Create a playlist called Found, select everything in Music and drag it into the Found playlist (it may take some time to count the tracks that are to be dropped). Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
    You can press ctrl-a to select all and then shift-delete to clear the remaining broken entries.
    tt2

  • ITunes not seeing iPod Shuffel songs

    Hi All
    I bought a 2nd gen Shuffel for my girlfriend the other day but ran into plenty of issues.
    Firstly, it did not want to be picked up on her PC (W2k with SP4). It kept saying "iPod is corrupted".
    Then, I plugged it in my laptop (XP Pro). Restored and updated with latest iPod software. Also copied some music from a CD. Everything was working until the next time I plug it back into my laptop again. iTunes does not see any previously installed music on the ipod.
    If I plug it back to my girlfriend's PC (Win2K), once again it say "iPod is corrupted"
    Any input on this please???

    I have used iTunes and iPods for several years. I
    always use automatic updating. Previously, any
    change to a song rating I made on my iPod would be
    reflected in my iTunes library after a sync. Since
    my most recent iTunes update (7.1.1), I have two
    problems. (1) iTunes does not update the ratings
    changes made on my iPod and (2) podcasts which I
    listen to on my iPod are not marked as "not new" in
    iTunes. It appears that Apple has screwed up
    something in the sync process in the newest iTunes
    version. Is anyone else having this problem?
    Having exactly the same problem as your first issue. In the playlist of top-rated tunes they all appear. However my iTunes library has 460 relevant tunes, whereas the same playlist on the iPod has 100 fewer. They are greyed out and can't be changed and aren't played.
    Any ideas?
    TIA Dermot
    MacBook Pro   Mac OS X (10.4.9)  

  • Itunes not seeing all the voice memos on my iPhone 4s

    I want to sync all my voice memos from my iPhone 4s to iTunes but when I plug my phone into my macbook air, the section that says voice memos only has about 37 of the 125 voice memos I have on the phone. I also looked in the Music section, which has the same 37 files plus an additional 8. It does not show any of the voice memos from the last 3 years. How can I resolve this? I want to sync but if its is not seeing these files, I'm worried they will get erased.
    I've read that I might be able to plug the iPhone into a PC that is running Linux and see the files under a 'recordings' type folder and them maybe transfer them to a thumb drive but I have not tried this yet as I'm hoping there is another way to extract the voice memos that iTunes is not seeing that are clearly on my phone.
    I have the new Macbook Air with Yosemite and iTunes 12.1.0.50. Oh and I have not updated my iPhone IOS since 2013 so I'm still on 6.1.3. I plan to update to the most current IOS but I want to make sure my voice memos are saved and don't get hosed in the process

    you have to enable that setting on your itunes. It would be under the music tab when you have your phone plugged in.

  • Itunes not seeing my 5th gen iPod

    I have a 30gige 5th gen Ipod and ITunes is not seeing it
    I have an iphone 4, an iPad and a iPad 2 which iTunes sees but not the iPod HELP!!
    Windows 7 64 bit
    I have deleted and reinstalled iTunes and I added the 64 bit one
    I have Nortons 360 on my computer as well

    Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • ITunes not seeing music on new computer

    I just copied my iTunes Music folder to a new computer. However the new iTunes that I downloaded on this pc is not seeing the music. I checked the path and it is pointed to the correct folder. If I go in and and do an Import the song will show up in the recently added playlist. Does anyone know if there is a quicker way to get these songs recognized? A mass import or maybe something else that I may have set wrong?
    Thanks in advance

    When you moved iTunes to the new computer did you copy the whole iTunes folder or just the iTunes Music folder? If you only copied the music folder then you've left the library file behind and iTunes has created a new blank one. You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
    If you did copy the whole iTunes folder then you need to locate the original library file. Presuming you put everything in the default location, try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file
    If you can't locate the library (if you've left it behind and no longer have access to the old computer for example), you'll have to make a new one by going to File>Add Folder to Library and adding the music from the iTunes Music folder that you did move.

  • Itunes not seeing iphone, vista, USB, error 1611

    After 8 hours of work and researching everything on the web and including here, I have restored my Iphone.
    Background: Itunes loaded on an toshiba laptop running 32 bit Vista.
    After plugging in and my iphone sync, I got the usual update message and finally decided to update. Well during the middle of the update the proceess aborted. I went to restore and that aborted.
    1. I tried an new cable and that did not work and started to get a 1611 error.
    2. I took the iphone to apple genius and he recovered the iphone from the broken restore and my phone was working with all data lost.
    3. I plug the iphone back in at home to restore my back up and Itunes would not see my iphone.
    4. I read serveral sites and articles on this site. I found that none of the articles got to the root problem. Several articles on the site need to be updated.
    Here are the results of my finding.
    1. After you find that your iphone will not connect to Itunes ( thus it does not show up in the device section of the left panel), you need to go to the device manager in windows (go to start - start search - type "dev" - select device manager.
    2 Open up the Universal System Bus section. You should see two things if your system is working properly when you iphone is plug in. One you should see the apple mobile device usb driver. Two you should see your card reader. You need to have both of these. If you dont have either your your system is not going to reconize your IPhone. I had one driver in there that said "unknow device". This was not the iphone in error!!!! As stated in articles on this site. This was the Card reader software by Realtek on my system. Because i did not have a card reader i could not see my Iphone.
    STEPS to fix.
    1. Shut down.
    2. Unplug all USB devices.
    3. Reboot to safe mode.
    4. Delete out all USB drivers.
    5 Shut down.
    6. This is important!!! unplug your power cord.
    7. This is important!!! take out your battery!!
    8. Let it sit for 5 minutes with out any power.
    9. Put in battery and plug in computer.
    10. reboot the machine to normal startup.
    11. Let it add all the USB drivers.
    12. You should now see your USB card reader. If not try it again.
    13. One you have your USB card reader driver. Plug in your Iphone.
    You should be working.
    Another helpful hint. If you reload Itunes like I did. Which was a wasted step. Because the Card Reader was the problem and reloading itunes will not fix this. Take a backup of the registry key that has your Iphone name. You will save some time.
    Good Luck and I hope this helps someone.

    technabob,
    What version of Windows Vista are you running (32-bit or 64-bit)? Please note that 64-bit versions of Vista are not supported as stated in the minimum requirements:
    http://docs.info.apple.com/article.html?artnum=305703
    In addition to iTunes and Quicktime, you will also want to remove/reinstall Apple Software Update and Apple Mobile Device Support as listed in:
    http://docs.info.apple.com/article.html?artnum=93698
    If you are still having issues, you may want to test the iPhone in a new user, or use MSCONFIG to see if there is any software that might be conflicting with the iPhone. For more information on using MSCONFIG, see this article:
    http://docs.info.apple.com/article.html?artnum=305415
    Good luck,
    Jennifer B.

  • ITunes not seeing iPhoto Albums in iPod interface

    All other iLife apps see the iPhoto albums but not iTunes. The Albums are not listed - just a blank window. When I try to sync all the photos from iPhoto to the iPod I am getting the -50 error.
    I have done the 5R's to the iPod.
    Any ideas?
    TIA
    MJ

    I followed your last instructions but I still get the error-50.
    I think I have narrowed it down to an iPhoto problem.
    I created a new iPhoto album and then created some smart+regular albums and iTunes could see them and sync them to the iPod. I then added about 1500 photos, at some point iTunes refused to see the albums again.
    I will keep at it until ...... if all else fails I will just take the photos that I want on the iPod and export them to an folder and added them to the iPod that way.
    Thanks for your input.
    MJ

  • ITunes not seeing iPod

    My iPod will not mount on the desktop or in iTunes. When connected to my iMac it shows the 'Do Not Disconnect' message, but nothing else happens. I have tried to reset the iPod but the same thing happens. I don't think I can Restore it if I can not see it in iTunes.

    I am having the same problem. My ipod is not showing on in finder or in itunes. I am not getting the "do not disconnect" message either. I tried the trouble shooting but there is nothing I can do if my Mac is not recognizing my ipod. My itunes is up to date and the os is up to date. I don't know what the problem is. I am currently in Germany and can't call tech support. I will be here until 20 June but don't want to be without my ipod that long. Is there anyone out there who can help me?!!!

  • Windows 8 64 Bit and iTunes not seeing devices

    Trying to get Windows 8 itunes to see my devices, have done uninstall and reinstall but seem to not have got Apple Mobile Device Service. Also with iPhone tells me to uninstall and reinstall 64 bit system which is what I have downloaded. Any help apreciated

    Hi PhantomAus,
    Thanks for the question. Based on what you stated, it seems like iTunes is not recognizing an iOS device. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • HT201413 Why does iTunes not see my iPod when connected?

    My computer does not see my ipod when I connect it to it.  Nor does it come up in iTunes.  How can I sync my music with this problem going on?

    Try one or more of the following:
    > Restart your computer
    > Uninstall & Reinstall iTunes
    > Reset iDevice Settings (will not delete everything)
    > Go to My Computer (Windows XP) or Computer (Windows Vista & 7) and see if your iDevice shows (should show as a digital camera)
    > Restore iDevice completely (will delete everything)
    > Make sure both iTunes and iOS firmware is Up-To-Date
    iPod Classic driver not recognized in Windows 7. Tried to "troubleshoot," message says "Not Fixed." No recommendations - Microsoft Answers
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Hope this helps.

Maybe you are looking for

  • Retina MacBook Pro: What new adapters do I need?

    I am seriously considering purchasing the new Retina Display MBP. My confusion lies with some of the adapters What adapter will I need to: a) hook a new Retina MacBook Pro to a VGA projector? b) hook a new Retina MacBookPro to a HDMI TV so that I can

  • XI calling an Oracle Stored Procedure which returns an Object to XI

    I am currently trying to call an Oracle Packaged/Procedure from XI which accepts a couple of parameters as I/O and returns an Object as one of the parameters. I have created the Object within the Oracle Database CREATE OR REPLACE TYPE xy_jdbc AS OBJE

  • Sender File Communication Channel Configuration

    Hi guys, We are trying to develop a file-to-Idoc scenario and we are facing some problems in the configuration of the sender file communication channel as far as the file format is concerned. The file, which is a material master file has the followin

  • "Sales value" in FD33, credit management

    Hi Experts, I have configured Credit management. After creating a sales order. The field "Sales value" (RF02L-SAUFT) in FD33 is NOT getting updated. It remains 0,00. After I have created a bill, field "Receivables" gets updated. Could you please advi

  • What is a T-Code to locate a PR from a shopping cart?

    What is a T-Code to locate a PR from a shopping cart?