Itunes 9 Win XP Pro XP2 x64 Ipod issue

I followed the installation guide for Itunes 9 under windows xp pro sp2 x64 bit. When I connect my ipod it seems normal but when I open Itunes I get an error message "The Software Required for communicating with the Ipod is not installed correctly. Please reinstall Itunes to reinstall the Ipod software. I also receive a wierd windows startup error message if I leave the Ipod connected when the computer is restarting I received a messing stating "Unknown wireless device connected please remove and restart" or something like that keep in mind this is only an Ipod 160gb video not an Iphone.
I have HP DV2, 4GB ram, AMD Turion X2 Neo 1.6hz, Mobile broadband un2400, Bluetooth 2.0 EDR, Wireless N, etc.
Itunes is 9.0.1.8
I was switching between two different guides to help out. I did the exact way it said on this forum though. Any help or suggestions?
BTW my device manager shows my Ipod only under disc drivers, driver shows says microsoft driver date 10/1/2002 driver version 5.2.3790.1830

If you installed the 32 bit version of iTunes, which is all you can do without hacking, you will not get the 64 bit drivers for burning or the iPhone.
You can download the 64 bit drivers for burning from the Gear site, but you are out of luck with the iPhone.
If you hacked the iTunes installer to allow installation of the 64 bit version, I have no experience of that and can't help.
Here are some links:
http://yukichigai.googlepages.com/iphonex64
http://pctech.invisibill.net/?page_id=36
http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/

Similar Messages

Error 45048 - itunes - Win XP PRO

I have a problem with my iTunes. After i updated my iTunes to 11.1.3.8, i can no longer download songs, apps or updates apps with my iTunes PC. The notif always, "An unkown error occured (-45048). I use windows XP PRO service pack 3. i try to uninstall the iTunes and then install it again but nothing happened. Same problem. i dont know where is the problem. I saw that for Win 7 there is a solution by deleting the SC Info folder... but what is solution for Win XP PRO ?

I am not re-ripping my CD's to AAC
Huh?
Then why did you write, "decided to use iTunes, and set it to Rip my CD's to AAC"?
If possible (and for best quality) you should RIP for the CD and not convert between lossy formats (AAC/MP3/WMA).
My question was simply why does iTunes take 3 times as long to RIP a CD at 128kbs AAC then WMP10 does to rip a CD to 192kbs WMA, and what can I do to give iTunes a boost?
In response to yoru question, Pac wrote;
"1) UPDATE FIRMWARE for the CD burner drive and get the latest updates for your system,like BIOs hardware ect ect from the PC makers site
2) Slow the burn speed from "Max" downto 16x 8x or 4x"
The reason I would prefer to go with AAC is that for the "same" bit rate/quality as MP3 you actually end up saving some space - on my calculation about 25% - so that is preferable.
You must be calculating something incorrectly.
Using iTunes to RIP, AAC and MP3 at the same bit rate are almost identical in file size.
The quality is definitely not the same.
There are better MP3 codecs available(LAME).
if there is other software out there that will RIP to AAC - and is faster than iTunes - then let me know.
Yes, there are different apps that will RIP AAC, but I can't recall offhand.

Itunes 10.4 Windows 7 x64 Ipod touch does not restore

Itunes 10.4 erased all data on my Ipod touch on my brand new Gateway Windows 7 laptop. But, it does not want to restore. It stops at the the final restore step. Error code 6 from Itunes. Brand new machine, fresh install of Itunes 10.4 from Apple site. No problem with internet connection or any other USB devices connected. Tried all Apple online solutions , including disabling my firewall. Nothing seems to work. Giving up on my Itouch and Apple. Time to move on.

Hello Apple, this message is to alert you to an abnormality in the synchronization of an iPod touch 4 on a PC (in French). Problem: Dévut synchronization => instead of "Start" ("Début"), it's marked "Dévut", thank you to correct this problem, Thx.
QuiFaitQuoi Inc..
Hello. Apple don't read these boards for bug reports, but the issue has been previously raised in another thread for which I have submitted a report.
To fix this issue for yourself in iTunes 10.6.1.7 open <Program Files>\iTunes\iTunes.Resources\fr.lproj\Localizable.strings in a suitable text editor such as Notepad++ and replace dévut with début in line 8543 so
"4366.070" = "Attente du dévut de la synchronisation";
becomes
"4366.070" = "Attente du début de la synchronisation";
Translated by Google. Hope it makes sense.
Bonjour. Apple ne lisent pas ces conseils pour les rapports de bogues, mais la questiona déjà été soulevée dans un autre thread pour laquelle j'ai présenté un rapport.
Pour résoudre ce problème par vous-même dans iTunes 10.6.1.7 <Program ouvertFiles> \ iTunes \ iTunes.Resources \ fr.lproj Files Localizable.strings dans un éditeur de texte approprié, tel que Notepad++ et remplacer dévut avec début dans la ligne 8543 de sorte
"4366.070" = "Attente du dévut de la synchronisation";
devient
"4366.070" = "Attente du début de la synchronisation";
Traduit par Google. J'espère que ça a du sens.
tt2

No audio from iTunes, WIN 7 PRO

I'm VERY experienced at audio, recording and sound. I've used iTunes for years with no problem. I just installed new iTunes to newly reformatted WIN7PRO and I have no audio. I do have audio from all other sources. I have expended all known remedies, including internal and preferences.

Possible remedies:
Check that you have the most recent version of iTunes (12.1.1.4 - released Feb. 18). The previous release (12.1.0.71) was widely reported to have significant playback issues, varying from "static" and stuttering to complete lack of output. The 12.1.1.4 release seems to fix most of these issues, in some cases in conjunction with the points below.
Check the setting of Play Audio Using in Edit > Preferences > Playback (you'll have to restart iTunes for changes to take effect). iTunes 12.1 sometimes defaults this to "Windows Audio Session" rather than "Direct Sound" where (for most users) the latter works better. In some cases, the 64-bit version of 12.1.0.71 did not have the Direct Sound option available, though this was more widely reported for Windows 8.
Check that you have the latest version of QuickTime (7.7.6) installed. Several people have encountered the problem you describe on new or re-built PCs where QuickTime had not been installed. This issue seems to affect Bluetooth audio devices though may not be exclusive to these.
There's an alternative installer here: iTunes 12.1.1 for Windows (64-bit — for older video cards) - some users have reported that installing this has addressed the problem you've encountered. The "for older video cards" is a something a misnomer - like most prior "64-bit" releases of iTunes, this is a 32-bit application with a 64-bit installer. The "standard" 64-bit version (12.1 and 12.1.1) is a full 64-bit application, but there appear to be a small number of possible incompatibilities between these and some 64-bit Windows systems.

Installing RAC on Win 2003 R2 StdEdt x64, OracleCSService issues ?

Hello,
First, I have to say this is my first cluster with Oracle products. Our enviroment has two HP DL380 G5 with Emulex dualport adapters, everything connected over two SAN switches to HP EVA4400. We have shared disk and that disk is visible from both nodes. We have configured heartbeat as well as public network. Here comes first question:
1. What is exact way hosts files needs to be setup in Windows enviroment? I am using this:
192.168.1.1 node01.company.intern node01
192.168.2.1 node01-priv.company.intern node01-priv
192.168.1.100 node-vip.company.intern node01-vip
and all this for node02 ...
Furtner, our Oracle versions are 10.2.0 and I am using document named:
Oracle RAC Install
Oracle Database 10g Release 2
(patchset 10.2.0.3) with
Microsoft Windows 2000/2003
32bit / 64bit
Using RAW for Oracle Clusterware files
and ASM for Oracle Database files
for instalaltion.I am geting to the point here:
Output generated from configuration assistant "Oracle Clusterware Configuration Assistant":
Command = C:\WINDOWS\system32\cmd /c call D:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: node1 node1-priv node1
node 2: node2 node2-priv node2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk1
Format of 1 voting devices complete.
Step 1: checking status of CRS cluster
Step 2: creating directories (D:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
tehnolog1 service OracleCSService in improper PENDING state, err(0)
tehnolog2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Clusterware Configuration Assistant" failed
The "D:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Also, we are having this error:
03/13/09 16:58:11 : (4720) : QueryDosDeviceAll: buffer was filled with 8063 bytes
03/13/09 16:58:11 : (4720) : Found disk PhysicalDrive0
03/13/09 16:58:11 : (4720) : Found disk PhysicalDrive1
03/13/09 16:58:11 : (4720) : Found disk PhysicalDrive2
03/13/09 16:58:11 : (4720) : The count = 4
03/13/09 16:58:11 : (4720) : The signature is 0x3a9d3a9c
03/13/09 16:58:11 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:11 : (4720) : The count = 4
03/13/09 16:58:11 : (4720) : The signature is 0x1
03/13/09 16:58:11 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:11 : (4720) : The count = 24
03/13/09 16:58:11 : (4720) : The signature is 0x97b0d827
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition1, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition2, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition3, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition4, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition5, err 1005
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : Created Link:ocrcfg Device:\Device\Harddisk2\Partition1
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : Created Link:votedsk1 Device:\Device\Harddisk2\Partition2
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:12 : (4720) : QueryDosDeviceAll: buffer was filled with 8079 bytes
03/13/09 16:58:12 : (4720) : Found disk PhysicalDrive0
03/13/09 16:58:12 : (4720) : Found disk PhysicalDrive1
03/13/09 16:58:12 : (4720) : Found disk PhysicalDrive2
03/13/09 16:58:12 : (4720) : The count = 4
03/13/09 16:58:12 : (4720) : The signature is 0x3a9d3a9c
03/13/09 16:58:12 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:12 : (4720) : The count = 4
03/13/09 16:58:12 : (4720) : The signature is 0x1
03/13/09 16:58:12 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:12 : (4720) : The count = 24
03/13/09 16:58:12 : (4720) : The signature is 0x97b0d827
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition1, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition2, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition3, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition4, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition5, err 1005
03/13/09 17:07:35 : (4720) : QueryDosDeviceAll: buffer was filled with 8505 bytes
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive0
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive1
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive2
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive3
03/13/09 17:07:35 : (4720) : The count = 4
03/13/09 17:07:35 : (4720) : The signature is 0x3a9d3a9c
03/13/09 17:07:35 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 17:07:35 : (4720) : The count = 4
03/13/09 17:07:35 : (4720) : The signature is 0x1
03/13/09 17:07:35 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 17:07:35 : (4720) : The count = 24
03/13/09 17:07:35 : (4720) : The signature is 0x97b0d827
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition1, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition2, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition3, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition4, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition5, err 1005
03/13/09 17:07:35 : (4720) : The count = 1
03/13/09 17:07:35 : (4720) : The signature is 0x1
03/13/09 17:07:35 : (4720) : Number of partitions (1) less than or equal to 4
Since I am behind schedule with this installation any help is more then welcome !
Where to look :-)?
Best regards,
damiri
Edited by: dimamovic on Mar 14, 2009 12:13 AM

Hello,
i'm currently facing very similar symptoms installing 11gR1 on Windows 2008 EE x64 (SP2). did you solve your problem and if yes how ?
txia

I cannot acess files onmy Win XP Pro server from my three win 8.1 umits

Okay, I'm finally off of most of the medicinal drugs and I still cannot get my share/use commands to work.
My environment is 4 PCs local network (one win 8.1 laptop (wireless), one win 8.1 desktop (hardwired and wireless), one win 8.1 tablet (wireless) and one win XP Pro - SP3 desktop (wireless) - the drive is an NTFS formatted drive.
On the in XP server with simple file sharing turned "OFF", I created a net user command that added a user. I set a password for this account and then the /add: operator. I used the /homedir: option to set the home
directory to the root directory of drive "C". I used the Net localgroup command to move don.farr into the administrator group. Both commands execute properly on the XP server. I also issue a net share command to share the root directory
of drive "C".
Using the laptop (Win 8.1) I do a net use command with the password for the drive appended to the end of the net use command.
When I try to access the files on my z: drive, I get "access denied" messages regardless of which method I use to get to the data files. For example, using "cmd" I switch to z: and cd into the root directory. I can do
a "dir"and see all the files, but if I try to do a "type" or even open the file with notepad (example "autoexc.bat") I get an access denied message.
Now, just to make matters more interesting, if I do "remote access", I can get to the drive and do just about anything I want to. Also, if I issue a "Net Session" command, I will see the user (don.farr) as a listed user but instead
of seeing the proper fullname. I do see the IP address followed by the user name.
On the win XP Pro system, if I issue the Net user command, I see user set up in the administrator group.
So I ask, what in the world am I doing wrong that is preventing my in 8.1 from full access to my in XP Pro drive.
This only became an issue of late because I am recovering from knee surgery and my ability to move to the different computers is a severe challenge at this immediate point in time.
Please help me!

The most probable reason stems from difference between SMB versions. W XP is SMB 1 and W 7 and 8.x are 2 or more. Lower higher version Windows to lower SMB. Sometimes other configuration items may play the role, namely
autotuning. Also versio 6.x Wiindows has different mechanism for neighbor discovery.
Root directory is usually shared by default and is accessible to local administrator.
I do recommend to place your question into public forum answers.microsoft.com
Regards
Milos

Installing Full Retail Win 8 Pro on a Lenovo System supplied with Win 8 Standard/Core

If you are attempting to install a full retail (or similar) copy of Win 8 Pro on Lenovo system that came with standard Win 8 (also referred to as Win 8 Core) installed from the factory, you will run into an issue at install time.
By MS design default , full Win 8 Pro retail (etc) versions look for a key embedded in the BIOS (often referred to as an OA3 or OA3.0 key). If that key does not match the version of Win 8 you are trying to install, the install will fail without offering the option of entering the retail key that was supplied with your full retail (etc) Win 8 Pro.
Microsoft has issued a "FAST PUBLISH" support article on how to work around this design approach. See
http://support.microsoft.com/kb/2796988
Note that this workaround requires the creating and placing of a PID.txt file by methods which are not entirely described in the support article, so be prepared to do some more digging for all the relevant information.
Cheers,
Bill
I don't work for Lenovo

Hi,
I have a Lenovo H520g essential desktop, which came with Windows 8 SL pre-installed. I bought my Lenovo on August 8 2013 and as of the November 2013 the machine was updated to Windows 8.1 Single Language.
Today, April 14th 2014, I bought Windows 8.1 Pro on a full retail DVD from a local physical Microsoft reseller. I have successfully installed Windows 8.1 Pro on my H520g. The installation run smooothly, no problems at all.
The steps I took were as follows:
1) Checked the UEFI BIOS to see if the DVD drive were included on the boot list and set it as the first boot device.
2) Booted the computer with the Windows 8.1 pro DVD on the optical drive.
3) Entered the Windows 8.1 License Key that came on the retail DVD.
4) Erased all partitions from the HDD were Windows 8.1 SL were installed.
5) Proceeded normally with the installation
Yesterday I made a phone call to the Microsoft support and they assured me that on all computers that come with Windows 8 SL pre-installed, it is possible to install Windows 8.1 Pro. The conditions are: 1) you must install the full retail version of Windows 8.1 Pro, not the OEM version; 2) you must do a clean install of Windows 8.1 Pro, not the install that preserves files and applications.
Cheers,
PauloBR

Win 7 Pro x64 - MS Office 2010 - .exe and .dll issues (And other)

Hi all,
Issue:
Cannot launch MS Office in anyway - Comes up with "c:\program files\commonfiles\microsoft shared\office14\MSO.DLL is either not configured or designed to run on windows ......" then the same box again immediately after "c:\progra~1\common~1\micros~1\office14\mso.dll"
is either not designed to run on windows or contains and error....."
Cannot run Google, cannot run IE, cannot start Help and Support cannot run the install disk as it comes up with "ieframe.dll" issues.
error box has been coming up "The operating system is not presently configured to run this application"
Am searching for answers here have tried EVERYTHING!
Earlier restore points, scannow, registering the .dll
I dont have the MS Office disk as I bought the laptop with both WIn 7 Pro and Office 2010 installed. ALthough I have now borrowed a friends Operating System disk.
Im after a way to restore the files without a full install shagg around to find the drivers etc ...
any ideas appreciated?

Hello Nzrogue，
About repairing Office, please take a look at the following article.
https://support.office.com/en-us/article/Repair-an-Office-application-7821d4b6-7c1d-4205-aa0e-a6b40c5bb88b
As this issue is related Office, to receive better support, it is recommended to post in the TechNet Office Forum.
The professionals there will be glad to help you.
https://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Using 4TB WD drives on M58p in Win/7 Pro x64

After taking advantage of Cyber Monday deals in December, 2013 for Western Digital WD4001FAEX 4 TByte drives, I suddenly was faced with the "32-bit MBR" issue on systems with normal BIOS (not UEFI) like my 7630 and 7483 M58p Small Form Factor PC's. My goal was to have a slightly less than 2 TByte C: drive with a D: drive partition around the same size starting BELOW "the 2 TByte line." I read in the forums that this configuration was possible but NONE of these gave a HOW-To process.   I've successfully done this three times on a 7630-B81 and pair of 7483's (an AF2 and a W59) systems, all running licensed Win/7 Pro x64 operating systems.   I started out using the Recovery partition from the 7630-B81 cloned to each Western Digital drive with Acronis True Image Free WD Edition. This created two partitions on each drive after performing a System Restore and applying genuine unique Microsoft Windows/7 Pro x64 product keys on each drive in each system. There was a 9.77 GByte Recovery partition, and just under a 2 TByte C: drive. The rest of the drive was "unallocated".   I applied all appropriate drivers for any new I/O and 170 or so Windows Updates including .NET Framework 4.51 code. I downloaded XVI32 (free) for a hex editor and the free MBR Wizard Command Line version 2.0b to pull and restore the Master Boot Record (512 bytes). I also installed the free version of EASUS Partition Master but this was only used to evaluate the number of available sectors in the "new" partition.
   I started the Win/7 Pro DISKMGMT command and decided to shrink the C: drive by 256 MBytes to expose a section of the 4 TByte drive that was below the "2 TByte line."   I created a new volume in that 256 MByte partition using DISKMGMT in order to establish a valid entry in the MBR's Partition Table.   I then used the MBRWiz command with the /save= parameter and provided a filename after the equal sign in order to save the current MBR contents, call it C:\Original.bin file.   Here is the contents of the 4 Partition tables in that file:
01BE     80 20 21 00 27 FE FF FF 00 08 00 00 00 80 38 01
01CE     00 FE FF FF 07 FE FF FF 00 88 38 01 00 78 BF FE
01DE    00 FE FF FF 06 FE FF FF 00 00 F8 FF 00 F8 07 00
01EE     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The 446 bytes before the address 1BE comprise the Boot program in the MBR. The last two bytes are 55 AA after the 4th partition table entry (all zeros on this example.).
I took the last 4 bytes of the 3rd partition (Length Field) and modified them to "extend" the 256 MByte partition to nearly the end of the drive, editting with XVI32.   Here's the new 3rd Partition Table entry:
01DE    00 FE FF FF 06 FE FF FF 00 00 F8 FF 00 A0 C8 D1
(When the partition is formatted for NTFS, the byte at 01E2 changes from x'06' to x'07' (NTFS)).
I then use MBRWiz with the /restore= parameter to load the modified MBR file to the target drive. If you are doing this to Drive 1, use the /Disk=1 parameter on the MBRWiz command line. With the new MBR online, I then restart Windows/7 Pro x64.   The new partition of 1718548 MBytes is ready for formatting. I checked my work with a 4-hour format of the new partition and all of the drives I formatted worked just fine
The 4 TByte drive size apparently is the largest drive that this "trick" will work on with the 32-bit MBR. This trick rely's on the "rule" that the last partition must START below "the 2 TByte line." I was surprised the number of partitioning tools that I tried would NOT work to create this partition configuration declaring the space was above 2 TBytes. Acronis True Image has a method to use the "unallocated" space, but it "creates" a Disk 1 out of that space and some applications like SpeedFan 4.49 will "crash" on that configuration. SpeedFan 4.49 works just fine with the drive configuration created here.
Disclosure: I am NOT employed by any of the brands mentioned here, but am an IBM Retiree not in anyway affliated with them.

Unfortunately your only solution may be to upgrade all of the AA8 installations. Adobe does not support AA8 on Windows 7, though several have been successful on 32-bit systems. The 64-bit system has been a killer for AA8 from what I have seen. Maybe one person reporting success. You might see if it can run under a compatibility setting. It is also interesting to note that the list you posted only mentions AA8.1, not the 8.3.1 that you indicated at the beginning. That could possibly be the issue. Generally the early releases have not worked with 64-bit systems. If you install the updates (maybe from Help>Updates, or as a download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows) you will get the systems to run. Do expect potential problems if you continue to work with AA8, but you might be able to work it out. Good luck.

Why i can't install itunes on my PC with win 7 pro 32 bit ?

dear apple.
Could you tell me how to install itunes 10 or 11 on my pc with win 7 pro 32 bit ?
when i try to installing itunes my PC has appear error so i can't complet install itune on my PC
Im trying many time but it just send me error and i cant finish installing itunes
So could you tell me how to fix that ?
Thanks
Jonny

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Win 7 Pro x64 Error 0x8007046a: Not enough server storage is available to process this command.

I installed Win 7 Pro x64 on a reasonably decent machine (Nvidia nForce 680i SLI, core 2 duo, 4 gig ram). It was a clean install on a freshly formatted partition. While copying a large bunch of files from another machine on the LAN, I get "Error 0x8007046a: Not enough server storage is available to process this command." It does give me the option to retry and continue, but the error inevitably pops up again later during the copy. Googling the error, I found a reference to it, suggesting I go to the registry and increase the IRPStackSize (but this article was not specific to Win 7). I tried increasing it as high as 32 hex. This reduces the frequency of the error, but does not eliminate it completely. Also, I now see a new error sometimes that says, "Too many files are currently in use. Quit one or more programs and then try again." That's odd, because I don't have anything else running. I haven't seen these errors when copying files to different partitions on the machine, so I assume it's something to do with network.

Hi,
To troubleshoot the issue, please try to do an In-Place Upgrade to repair the system.
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
Thanks,
Novak

A55M-P33 - Win 7 Pro x64 - 8.00GB (3.49 GB usable)

Hello!
After a few hours of google searching i've decided to ask for help.
Search of this forum did yeald one post similar to mine: https://forum-en.msi.com/index.php?topic=161010.msg1180013
But there was no solution.
Problem is very weird.
Win 7 Pro x64 with 8 GB of RAM but only 3,49 usable.
Memtest and Ubuntu see's only 3,49 GB, so it's not an OS issue.
But BIOS detects all 8GB, so it's not a defected module. At least it shouldn't be, it a new rig with no other problems.
I guess that integrated graphic reserves that memory, but any options regarding this don't have any effect on 3.49 GB usable.
Although graphic driver in windows says graphic memory is 2GB (see the first pic)
Any help would be greatly appreciated!

There are only two memory slots. Both filled by 4GB Patriot modules.
I should not open case because is under warranty so i guess i'll contact the store who sold me the computer.
Wanted to know if that is some kind of feature before i return it to a store.
Could not believe and thought that Svet was joking when he recomended to check for bent pins (https://forum-en.msi.com/index.php?topic=161010.msg1180051#msg1180051)
For all the years that i worked with computers i never saw a CPU with bent pins or any other kind of damage to boot the OS and work "just fine".
The only problem that this computer has is it doesn't utilize all the memory.

Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall and reinstall iTunes. I get the same failure each time.

Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall iTunes and reinstall, same error occurs. What's up?

Hello, rodneywjr.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
Jason H.

Itunes stops working when I click a home video with ver 11.1.5.5 win 7 pro 64 bit

I have home made videos and when I click to open Itunes stops working and box says"Itunes has stopped working" and says "Windows is checking for a solution to the problem" turns out Windows doesn't respond and I have to close the program..Tried it again and again with same result..Nicolino
Specs ver 11.1.5.5 win 7 pro 64 bit

Hello nicolini,
It sounds like iTunes quits unexpectedly everytime you try to open it so you can no longer use it. I recommend the troubleshooting steps in the following article to help you troubleshoot the issue here, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
Start with these steps to open iTunes in Safe Mode to see if a 3rd party app may be interfering with iTunes. There is additional troubleshooting to be done in the article if this is not the case:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
All the very best,
Sterling

IPod undetected in Win XP Pro Sp 2

Just got a used 40gb ipod photo, have it on the dock, connecting to my win xp pro system using the firewire cable. Charges and everything, but completely invisible to windows (itunes, ipod updater, etc.) Have tried resetting, going into disk mode, disconnecting and reconnecting from the system, and reinstalling itunes and ipod updater. Still zilch. Help!

Just got a used 40gb ipod photo, have it on the dock, connecting to my win xp pro system using the firewire cable. Charges and everything, but completely invisible to windows (itunes, ipod updater, etc.) Have tried resetting, going into disk mode, disconnecting and reconnecting from the system, and reinstalling itunes and ipod updater. Still zilch. Help!

Itunes 9 Win XP Pro XP2 x64 Ipod issue

Similar Messages

Maybe you are looking for