ITunes 9 with Windows 7 (both 64-bit) - Error using my Ipod touch 1G

Hello,
Lately, I've installed windows 7(x64) on my computer (Free update from vista to windows 7 ). Ever since, my Ipod can't be used on my computer anymore. When I connect my Ipod on my computer, it says that he's installing drivers for my Ipod, but after a while, he says he failed installing. I have (like the support says), looked in the services, but there is no apple mobile device service to start or restart. I have also installed the newest Itunes x64 a various times again, and it still won't work!
Help me please!
Message was edited by: waj1

Okay ... so it's apparently not a "ghost" copy of usbaapl64.sys stuck on your system and causing grief.
Turning back our attention to the Apple Mobile Device Service ... it depends on the TCP/IP Protocol Driver and the IPSEC Driver on a PC. (At least it does on an XP Pro or Home system.)
We'd better check to see if they appear to be functioning properly on your PC.
Head back into your Device Manager. Go "View > Show Hidden Devices". Now expand "Non-Plug and Play Drivers". *Don't change anything in there ... We're just having a look.*
Are there any alert messages showing up next to your TCP/IP Protocol Driver or IPSEC Driver in there? If so, what do they say?

Similar Messages

ITunes in Windows XP 64 bit not recognizing my iPod Touch

I recently switched to XP 64 bit and after much much messing around I finally got itunes installed and running (how is a whole nother thread's worth that I'll see about answering later). But now it won't recognize my iPod Touch. Any suggestions on how to make this happen?

I did a restore. Not from backup, though, as I had not done a backup prior to the restore. However, in the process of the restore, it asked if I wanted to back up and I said yes.
The restore concluded, and then it asked if I wanted to put the backed-up stuff back on the iPod, and I said yes.
Then I did the sync. It seemed to be working. It went through 3 steps and stayed on step 3 for a while. Then it ended, and there was nothing on the iPod. The "Music" button opens a screen that says "no content."
Then I did a sync test from Help->Diagnostics. This is what was displayed on the command window:
Performing Sync Diagnostics for iTunes
reporting PE file versions
reporting time zones
Enabling Sync Logging
Starting Sync
2013-03-13 02:59:11.896 syncli.exe[3188:e6c] setting one shot sync group for client con.apple.MobileSync.6f93c87e3101b680446936d817872280c801eb54
2013-03-13 02:59:11.956 syncli.exe[3188:e6c] no registered client con.apple.MobileSync.6f93c87e3101b680446936d817872280c801eb54
Waiting for Sync to finish
...Disabling Sync Logging
The test ended "successfully" (with a green light, etc).
Don't you think that "no registered client con.apple.MobileSync.blahblahblah..." is significant? Seems like it was unable to do the sync because some program or process or whatever was missing.
So, still not synching. Is there anything else I can try? Thanks...

Lost iTunes with Windows update, now I can't sync iPod Touch

My computer recently updated windows and I lost iTunes and my music library. When I re-installed iTunes, I tried to sync my iPod but it's telling me that I am synced with another library and it wont let me transfer my music from my iPod to the music library. It will only let me transfer purchased music. Is there a way I can restore my old library or will I have to start fresh all over again? It will not let me sync my iPod with my daughters either whether home-sharing is on or not. I also tried home-sharing, it does nothing.

It has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to put verything back.

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 126)
Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
Can somebody provide me a solution please....

Itunes store wants my password eveytime I use my iPod touch.

I did a factory reset recently. Now my ipod touch asks for a itunes password every time I start it or turn it on. It's like a push message. It's very annoying. I'm not even in the app store or anything. Can anyone tell me what to do?
Thanks,

Try the solution in this thread: http://discussions.apple.com/thread.jspa?threadID=2350026&tstart=60
ie remove any paused downloads you have in itunes

ITunes With Windows 7 64 Bit Doesn't Access Ipad Since Last Update

I'm assuming Apple has figured this out by now - but at least on my pc - to plug in my Ipad and make it work I have to stop the apple mobile device service (itunes is locked up otherwise) and then go to devices and reinstall the apple usb driver from C:\program files\common files\apple - which is pretty strange since the rest of the itunes software is in the program(x386) directory... I'm guessing someone had a blonde moment and installed part of the program to the wrong directory - but once I do that (and I had to do it again just now after the Ipad update) it works just fine. Just wanted to know if anyone else had the issue or if it was just me...

I'm having a similar problem - my computer tells me that "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it". I'm also using Windows 7 64bit.

X220 with Windows 7 (64 bit) Pro using SSD Samsung 840 (500G) drive

I am using a Thinkpad X220 (4291) laptop with 8 gigs of RAM. I recently switched my HDD for an SSD (Samsung 840 which is 500G). I have been following the posts and have set the BIOS accordingly as well as updated firmware for the drive. I use Crystal Disk Mark for measuring the read/write of the drive and am not getting the speeds I should. I currently get:
CrystalDiskMark 3.0.2 (C) 2007-2013 hiyohiyo
                           Crystal Dew World : http://crystalmark.info/
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
           Sequential Read :    93.514 MB/s
          Sequential Write :    95.135 MB/s
         Random Read 512KB :    89.534 MB/s
        Random Write 512KB :    89.051 MB/s
    Random Read 4KB (QD=1) :    12.735 MB/s [ 3109.1 IOPS]
   Random Write 4KB (QD=1) :    29.898 MB/s [ 7299.3 IOPS]
   Random Read 4KB (QD=32) :    85.220 MB/s [ 20805.6 IOPS]
Random Write 4KB (QD=32) :    54.319 MB/s [ 13261.4 IOPS]
Test : 1000 MB [C: 5.3% (24.6/465.8 GB)] (x5)
Date : 2013/01/14 13:23:26
    OS : Windows 7 Professional SP1 [6.1 Build 7601] (x86)
As you can see the speed is drastically slower than advertised. (Should get 504 Mbits/sec read)
Any thoughts?
Thanks,
Jamie

I have an X220 with W8 Pro and Samsung 840 Pro. Getting 528 read and 474 sequential write.   Did you install the Samsung Magician software and update the firmware on the SSD?
Samsung Magician will also provide a speedtest you can check against crystal disk mark.
Lots of sites for optimizing SSD settings but unless it is a firmware issue I don't know why you would get such slower speeds.
Kent

Please help: Can't download itunes with windows 7 (64 bit). Keeps freezing at 99%

I have tried deleting and re-installing itunes and quicktime but it still won't work. Please help.

Can someone please respond to my request for support? I tried the provided correct answer at https://discussions.apple.com/message/11561783#11561783 but it did not work.
I also got a MSFT tech support person to remotely look at my machine, for what its worth, he said the registry file is fine and to contact Apple support.
Any help would be very much appreciated.

With itunes 10.5 last version today 15 october, windows 7 64 bits, unable to recognize ipid touch in itunes (windows recognizes the ipod) help !!

windows 7 64 bits : it recognizes the ipod Touch
but itunes is unable to see the ipod
I've been following all the steps descripbed in apple.support and the problem remains
iOS 5 and Itunes 10.5

I found the solution after a year of dysfonctionnement
My motherboard was P7P55D from ASUS
operating system Windows 7 64 bits
I have upgraded the BIOS with the lastest BIOS from ASUS ant itworks : My PC recognizes all ipods and also my Tomtom GPS that was also not recognized.
So update your BIOS ... it is risky but it works (or ask a professional to update your BIOS)
and with Itunes 10.5 ou can also synchronize the ipods via WIfi : no USO required (once you've succeeded in connecting ipod to the pC one time)

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

Hi Drgeert-
The hub may not be broken per se, but Apple has made adjustments to the limits on current that can be drawn from ports.
You probably need a new hub.
These may be helpful and/or interesting:
USB: High Bandwidth and Isochronous Devices Must Be Separated
USB Product-Specific Details
Luck-
-DaddyPaycheck

Remotely control the ITunes on Windows 7 64 bit PC with the new IPad

With the latest version of ITunes for both Win7 and the new IPad, I'm only able to use the new IPad to remotely control the ITunes on Windows 7 64 bit PC through wired connection ( ethernet cable ) to the wireless router. As soon as I connect my PC through wireless connection, the new IPad can not find my libraries.
Is this a known issue or am I missing some settings?
Thanks,

Are you using the 64 bit installer?
See also Recovering your iTunes library from your iPod or iOS device.
tt2

HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
Ron

See Troubleshooting issues with iTunes for Windows updates.
tt2

Please help. my computer is hp with windows vista 32 bit. I can't installe itunes . not the new one or and old one. i have try to uninstalle itunes and reinstall itunes again but it didn't work. please help

please help. my pc is a hp with windows vista 32 bit. I can't install itunes 10,5. I have try to remove my old itunes and reinstall but it didn't help. I have install itunes 9.1.1 but the itunes library can't be read because it is on a new itunes. I hope someone can help. I'm lost.

Deauthorize all of your computers and authorize the computers you use.
http://support.apple.com/en-us/HT6283
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best.

How to install itune under Windows XP 64-bit professional with SP2?

I have iPhone 3GS for over a year and I have set it up at my work computer (Windows XP professional) with latest iTune and it work great. Recently our IT has upgraded our system and all of our new machines has Windows XP 64-bit OS.
I can't figure out how to install iTune under Windows XP 64-bit, to synch with my e-mail, contact and calendars any more?
Can any one help?

New machines? With XP 64-bit? Your IT department is being rather foolish, in my opinion, deploying new installations of XP 64 since Microsoft discontinued mainstream support for it (more than two years ago) and it's never really been satisfactory.
Anyway, there is no version of iTunes that supports the 64-bit version of Windows XP and almost certainly never will be. If you search the iTunes for Windows forums for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete. Connecting to iPhones is one of the most problematic issues.
Regards.

ITunes 9 with Windows 7 (both 64-bit) - Error using my Ipod touch 1G

Similar Messages

Maybe you are looking for