Itunes account does not relfect correct iphone 4 apps

HELP. I am not sure what to do. I just updated my iphone 4 software and cant seem to make my itunes apps the same as what is on my phone. I only want the apps on my phone. It is showing all old apps on my itunes account. I also cant click on anything when I go into the apps tab of my itunes account. I would think it would be easy to just delete the apps from my itunes but I cant click on anything. It looks like the box is already checked to "sync apps" but it wont let me click and manage the apps???

Read
http://support.apple.com/kb/TS1538. Or
http://support.apple.com/kb/ts1591

Similar Messages

ITunes 12 does not recognize my iPhone 6

Since I upgraded to Klondike, iTunes 12 does not recognize my iPhone 6

I had similar problem but itunes recognized my mini ipad
Resolution for me: go to sign out, quit itunes, restart itunes.
Hopefully, iphone will be listed as mine was.

ITunes 10 does not detect my iPhone

i recently upgraded to itunes 10, and i have a 1st gen iphone. after upgrading, i synced my iphone and everything went fine. soon after that, i had a totally unrelated hard disk drive failure. luckily all my data were backed up, apple replaced my hard disk, and i restored all my data. however, when i tried to connect my iphone to itunes to sync, itunes would not detect the iphone. i tried many fixes, the only one that worked was to reinstall itunes 10 (which is a pain, because you have to get rid of lots of files.) last night, after reinstalling itunes 10, i connected my iphone and itunes detected it and synced. i thought the issue was solved for good and maybe was related to the restoring of the backed up data. however, i just tried to sync again, but the problem has re-appeared. my itunes does not detect my iphone.
the console message i get is as follows:
9/7/10 3:56:17 PM usbmuxd[30] connect_toport (thread 0x100581000): Could not connect to USB mux port 32498 for device 2: Connection refused
9/7/10 3:56:17 PM usbmuxd[30] MobileDeviceConnectlocked (thread 0x100581000): Could not connect to lockdown port on device bac8e3086978950d97c077103aa8996ccb56eec1.
9/7/10 3:56:17 PM usbmuxd[30] _MobileDevicePairWorker (thread 0x100581000): Pair worker (0x0x100581000) could not connect to lockdownd: kAMDMuxConnectError
i thought that usbmuxd is built for linux, but is it doing in itunes 10? but it must belong to it, because i also got this (i think when booting, but i am not sure):
9/7/10 3:33:40 PM com.apple.usbmuxd[30] usbmuxd-201 built for iTunesTen on Aug 12 2010 at 17:33:03, running 64 bit
what is going on? i don't want to reinstall the **** itunes every time i have to sync. any solution? thanks

Here is the diagnostics test ran within iTunes (under help tap inside iTunes).
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 3000
iTunes 10.0.0.68
QuickTime 7.6.7
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.3.0
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number BXXXXXXXXXX
Current user is an administrator.
The current local date and time is 2010-09-17 01:08:36.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Video Display Information
Intel(R) 82865G Graphics Controller
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.0.0.68 is currently running.
iTunesHelper 10.0.0.68 is currently running.
Apple Mobile Device service 3.2.0.0 is currently running.
** Device Sync Tests **
*No iPod, iPhone, or iPad found.*
Please help!!!!!!

ITunes 11 does not see my iPhone

I installed iTunes 11 with software-update and got an error-message (see screenshot, german), nevertheless it was updated.
It works fine, but it does not see either my iPhone or my iPad in the list on the left side. There are no devices ...
Thanks for help ...

And suddenly, after 2 restarts, it´s there.
Problem solved. No idea why it works now.

Itunes store does not open correctly in itunes 10

Not sure when this started, but itunes store no longer loads correctly. Tables do not load correctly at all. Diagnostics are listed below. The same problem occurs at travelocity, but I haven't found it occurring anywhere else on the web. I have a screen capture, but don't see where i can post it here. I also could not find an email contact for apple customer service. Can anyone help?
Microsoft Windows 7 x64 Business Edition (Build 7600)
System manufacturer System Product Name
iTunes 10.1.2.17
QuickTime 7.6.9
FairPlay 1.10.24
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
VoiceOver Kit 1.4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.1.3
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 3685D2E00F73241B
Current user is not an administrator.
The current local date and time is 2011-02-20 14:15:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9500 GT
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 0eeb525c083b1699965df026b1f54f1e
The drive H: TigerJet CD-ROM Rev v2.0 is a USB 1 device.
iPodService 10.1.2.17 (x64) is currently running.
iTunesHelper 10.1.2.17 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {D8AF9C2B-8397-4ACA-A1E6-5836D606B53F}
Description: Belkin USB Wireless Adaptor
IP Address: 192.168.1.79
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Sun Feb 20 11:11:04 2011
Lease Expires: Mon Feb 21 11:11:04 2011
DNS Servers: 192.168.1.254
Adapter Name: {FF956C2E-FC9E-4000-A7BE-A329BE09BACE}
Description: Atheros L2 Fast Ethernet 10/100Base-T Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-02-20 14:13:24.

Not sure when this started, but itunes store no longer loads correctly. Tables do not load correctly at all. Diagnostics are listed below. The same problem occurs at travelocity, but I haven't found it occurring anywhere else on the web. I have a screen capture, but don't see where i can post it here. I also could not find an email contact for apple customer service. Can anyone help?
Microsoft Windows 7 x64 Business Edition (Build 7600)
System manufacturer System Product Name
iTunes 10.1.2.17
QuickTime 7.6.9
FairPlay 1.10.24
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
VoiceOver Kit 1.4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.1.3
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 3685D2E00F73241B
Current user is not an administrator.
The current local date and time is 2011-02-20 14:15:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9500 GT
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 0eeb525c083b1699965df026b1f54f1e
The drive H: TigerJet CD-ROM Rev v2.0 is a USB 1 device.
iPodService 10.1.2.17 (x64) is currently running.
iTunesHelper 10.1.2.17 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {D8AF9C2B-8397-4ACA-A1E6-5836D606B53F}
Description: Belkin USB Wireless Adaptor
IP Address: 192.168.1.79
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Sun Feb 20 11:11:04 2011
Lease Expires: Mon Feb 21 11:11:04 2011
DNS Servers: 192.168.1.254
Adapter Name: {FF956C2E-FC9E-4000-A7BE-A329BE09BACE}
Description: Atheros L2 Fast Ethernet 10/100Base-T Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-02-20 14:13:24.

802.1x accounting does not reflect correct port status

Hi,
I've just discovered an issue when trying to use MSFT supplicant and Cisco 802.1x accounting. This makes 802.1x accounting completely unusable.
Facts:
1. MSFT supplicant does not send EAPOL-Logoff messages and there's no way to enable this (btw. Aegis client does not send it either, except when disabling interface).
2. I am doing machine authentication along with domain authentication.
3. Windows XP SP2 is used with EAP registry hacks applied.
4. PEAP/MS-CHAPv2 method is used.
Now when the computer is started it is logged into 802.1x with 'host/machine' account and RADIUS accounting start is sent by the switch. That's fine.
When a user logs on with its 'domain\user' identity, then EAPOL-Start is sent from the host triggering new EAP message exchange and the user is authenticated correctly. However the switch sends Interim Accounting still using 'host/machine' credentials which is obviously wrong.
Even more bizarre accounting happens when the user subsequently logs off from the machine. The EAPOL-Start is sent from the host triggering new authentication process for 'host/machine' identity and the host is authenticated ok. The accounting being sent is:
- first Accounting Stop for 'host/machine' User-Name
- then strange Interim Accounting with most attributes empty or missing
256970: Jul 10 15:56:41.211 MET-DST: RADIUS: authenticator 68 CA 1A 46 85 4F F5 95 - 87 B4 84 61 72 85 42 F3
256971: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Id [44] 10 "013F0000"
256972: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 34
256973: Jul 10 15:56:41.211 MET-DST: RADIUS: Cisco AVpair [1] 28 "connect-progress=Auth Open"
256974: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Time [46] 6 0
256975: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Octets [42] 6 0
256976: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Octets [43] 6 0
256977: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Packets [47] 6 0
256978: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Packets [48] 6 0
256979: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
256980: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
256981: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 24
256982: Jul 10 15:56:41.211 MET-DST: RADIUS: cisco-nas-port [2] 18 "FastEthernet0/11"
256983: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port [5] 6 50011
256984: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port-Type [61] 6 Eth [15]
256985: Jul 10 15:56:41.211 MET-DST: RADIUS: Class [25] 27
256986: Jul 10 15:56:41.215 MET-DST: RADIUS: 43 41 43 53 3A 30 2F 32 39 32 66 2F 61 38 31 38 [CACS:0/292f/a818]
256987: Jul 10 15:56:41.215 MET-DST: RADIUS: 30 32 38 2F 35 30 30 31 31 [028/50011]
256988: Jul 10 15:56:41.215 MET-DST: RADIUS: Service-Type [6] 6 Framed [2]
256989: Jul 10 15:56:41.215 MET-DST: RADIUS: NAS-IP-Address [4] 6 10.129.128.40
256990: Jul 10 15:56:41.215 MET-DST: RADIUS: Acct-Delay-Time [41] 6 0
256991: Jul 10 15:56:41.239 MET-DST: RADIUS: Received from id 1646/238 10.129.128.38:1813, Accounting-response, len 20
256992: Jul 10 15:56:41.239 MET-DST: RADIUS: authenticator ED 8E 8B 15 28 5F E4 37 - BF A8 F5 9E 10 43 5E A8
So that the accounting sent from the switch does not reflect current status of the authenticated user on a given port.
How to deal with this issue? Any ideas?
thanks,
robert

Does your radius proxy-table is populated wrong for EAP- SIM users ?

ITunes 12 does not recognize my iPhone 6 plus; it knows it's there but can't identify it

My iPhone 6 plus connects via USB to my 64-bit Windows 7 Professional PC, but iTunes (version 12) does not recognize it. How do I cure this so I can sync my audio library?

Hi Louis,
The article linked below details steps that can help get iTunes to recognize your iPhone.
iPhone, iPad, or iPod not recognized in iTunes for Windows
https://support.apple.com/en-us/HT204095
Sincerely,
Allen

Itunes 10 does not 'see' my iphone after upgrading my Imac to Snow leopard

Hi,
I just upgraded my iMac to Snow Leopard 10.6.3. When I plug my iphone (4) (USB), Itunes does not sync my phone, and it does not even appear as being connected to my iMac. I dont have any other issues.
I should add that I always have connected my Iphone through the USB on the keyboard, as I dont have enough USB slots in the back. This has worked just fine in the past. The keyboard is wired.

Try plugging it into one of the USB ports on the Mac itself and see if that works.

ITunes 10 does not see my iphone 3g

I have done all the steps on the apple website, including reinstalling itunes 10 and rebooting my machine countless times. All the required services (Bonjour, Apple Mobile Device, and iPod Helper) are running in the administrative tools, and yet my iphone 3g (and my ipad) does not show up on itunes 10.

I have this same problem since loading a new computer from my time capsule.... did you ever get an answer?
Ger

ITunes 11 does not detect my iPhone

Since installing iTunes 11, when I connect my iPhone to the USB port, it does not show as a Device on the side panel ... And when I go to Devices everything is grayed out.

Hey Sarah,
So I was having the same issue. iPhone 5 on iTunes 11. iPhone wouldn't come up on iTunes 11 on a new MBA (less than a week old), or even iPhoto! So after reading many forums and trying many things this finally did the job:
Quit all your applications, turn off the mac and deselect the button that says reopen windows when log back in so that is not ticked:
Then restart the computer. Your iPhone should now come back on iTunes as visible when you relaunch iTunes or iPhoto and reconnect it.
Hope this helps you, it would of saved me hours had I read this sooner.
Yeison

How can I sync my iPad with a new laptop (same itunes account) and not lose all my app data, i.e. games data stored on the ipad, not the app itself?

I want to sync my iPad with a new laptop, so I can get rid of the old computer. I have already downloaded all the itunes content on the new laptop, but when i go to sync, it tells me that itunes will erase and copy all the apps from the new library. The 2 computers are on the same account, so is there a way to copy the apps (including app data) onto the new laptop, instead of vice versa?

See Recover your iTunes library from your iPod or iOS device.
tt2

ITunes store does not display correctly.

It almost looks like a style sheet is not being applied. Anyway, if I go to the store, all of the banners take up the entire width of the screen, and all of the links look like generic hyperlinks. The links work, but they take me to other pages that are also broken. For instance, if I search for "metallica", the initial results has a generic "Power Search" Hyperlink, a generic drop down for "All results", followed by left justified labels and textboxes for "title", "Atrist","Composer","Song",Album", etc.
None of the buttons to order anything work. So, no money to you Apple, until this is fixed.
thanks.

Nortel IPSECSHM Adapter
Dell Wirelss 1390 WLAN Mini-Card
Broadcom NexXtreme 57xx Gigabit controller
Everything was verified, all tests passed.
Microsoft Windows Vista Business Edition Service Pack 1 (Build 6001)
Dell Inc. Precision M90
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.0.34 (214.3)
iTunes Serial Number D74008657B86EEBC
Current user is not an administrator.
The current local date and time is 2010-04-13 10:57:47.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA Quadro FX 2500M
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 188a00bb56bf48833ae07c5dd317edbf
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {BE0A49C8-54AC-4117-8E36-648360FF3AA0}
Description: Nortel IPSECSHM Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Wed Dec 31 18:00:00 1969
Lease Expires: Wed Dec 31 18:00:00 1969
DNS Servers:
Adapter Name: {E30963DF-AD2F-4005-9182-C532882F229E}
Description: Dell Wireless 1390 WLAN Mini-Card
IP Address: 192.168.51.37
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.51.1
DHCP Enabled: Yes
DHCP Server: 192.168.51.1
Lease Obtained: Tue Apr 13 03:24:22 2010
Lease Expires: Wed Apr 14 03:24:22 2010
DNS Servers: 192.168.51.1
192.168.51.1
Adapter Name: {512BFFE1-F480-4256-B4A3-396FEE001F44}
Description: Broadcom NetXtreme 57xx Gigabit Controller
IP Address: 192.168.21.188
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.21.233
DHCP Enabled: No
DHCP Server:
Lease Obtained: Wed Dec 31 18:00:00 1969
Lease Expires: Wed Dec 31 18:00:00 1969
DNS Servers: 192.168.21.10
192.168.21.10
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-04-13 10:47:05.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: RAVY P6JK1I34XEF0, Rev 1.03
Drive is empty.
** iPod/iPhone Connectivity Tests **
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPhone 3G running firmware version 3.1.3
Serial Number: 87835K051R4
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

ITunes 11 does not detect my iPhone 5

I recently downloaded iTunes 11 on my MacBook Pro and it is not detecting my iPhone 5 (running on iOS 6.0.1) and consequently, not allowing me to sync. Any suggestions on how to fix this problem?

Hey Sarah,
So I was having the same issue. iPhone 5 on iTunes 11. iPhone wouldn't come up on iTunes 11 on a new MBA (less than a week old), or even iPhoto! So after reading many forums and trying many things this finally did the job:
Quit all your applications, turn off the mac and deselect the button that says reopen windows when log back in so that is not ticked:
Then restart the computer. Your iPhone should now come back on iTunes as visible when you relaunch iTunes or iPhoto and reconnect it.
Hope this helps you, it would of saved me hours had I read this sooner.
Yeison

HT1369 itunes 11 does not recognize my iphone 5s

I have installed and re-installed itunes twice and it still will not recognize my iphone 5s which is connected.
I keep receiving the following error screen after I connect the phone.
I have also run the diagnostics test and get the following message.
any suggestions to resolve are appreciated.
Thanks,

Hi, Alexdeulph.
Thank you for visiting Apple Support Communities.
You may find this article helpful when troubleshooting iTunes not recognizing your iPhone. Make sure to disable any security software, using an Apple branded cable and avoid using a hub.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Cheers,
Jason H.

I have a nano with 500 songs that was synced with my old computer that crashed. New iTunes account does not have these songs in my library. I would like to move the music to the library so I can place them on my iPhone and/or iPad.

I have a nano with 500 songs that was synced with my old computer that crashed. Bought a new computer, now my music is not in my iTunes library. I did the share thing but it didn't work.

http://www.yamipod.com/main/modules/home/

Itunes account does not relfect correct iphone 4 apps

Similar Messages

Maybe you are looking for