Itunes, Airport Express, Multiple Speakers... can't play both at same time

Set up 2 aiport express units with speakers attached. Connected to my wi fi no problem and can play through either speaker... but can't play through both at the same time? Any suggestions gratefully received . Thanks

ok, was being thick. In the multiple speakers box in itunes I need to drag and resize the box so that I could see all the speakers I have attached, now everything is working fine.... and I'm loving it!
Would be nice if the multiple speaker box automatically resized to show everything attached.... but I'm bound to say that aren't I lol.

Similar Messages

  • How do you stop multiple Youtube videos from playing at the same time?

    As of a few days ago, when I click on a youtube video, as the commercial begins to play, you can begin to hear multiple/different commercials playing at the same time. After the commercials, the same issue occurs with the main video--multiple videos are being played at the same time and are not in sync. I've updated all my plug ins and have tried the suggestion posted in the forum provided in the link below in which someone else has expressed the same issue, but nothing has worked so far. Does anyone know what can be done?
    http://productforums.google.com/forum/#!topic/youtube/5Lnikma4UqM

    Are you loading those videos as Flash or HTML5? It is possible to prevent videos from playing until you click something with Flashblock for Flash or Stop Tube HTML5 for HTML5. You can also stop the commercials with Adblock Plus with an Easylist subscription.
    * https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/
    * https://addons.mozilla.org/en-US/firefox/addon/flashblock/
    * https://addons.mozilla.org/en-US/firefox/addon/stop-tube/

  • Airport Express/Multiple Speakers/Drop Outs

    Question -- I have a wireless network at home -- a Linksys wireless router which I use to connect my Dell laptop and my powerbook to the internet. I have two airport express stations ... one for my living room stereo, and one for kitchen speakers. Streaming itunes to one set of speakers works fine, but when I stream to both sets of speakers I get constant hiccups and sound drops during the playback. Any thoughts/suggestions how to fix this problem?

    I had this problem. It was because I had interference (ie poor reception to ONE of the airport express units). When the one would cut out they BOTH would cut out. It was really annoying. You can check if this is your problem by placing both of the airport express right near your router (ie in the same room) and see if you get the dropping out (you shouldn't).
    My solution was finally only solved by buying a new router and setting up a WDS network. I got a linksys WRT54GL and use the DD-WRT firmware. There are lots of instructions on the net on how to set this up. Then each airport express acts as a repeater. They seem to support each other, and the result for me was that I got wireless coverage EVERYWHERE in my house, and the music stream stopped dropping out.
    Also with the DD-WRT firmware you can change the xmit power of the router (and increase it!) to improve coverage.
    Hope this helps.
    Mike

  • Hp pavilion g7; speakers and headsets playing at the same time suddenly.

    When i woke up this morning, I found out that my speakers and headsets are both playing at the same time. It did not do this before and I've been really stumped in finding a fix. I have gone through most the the related threads about this online but none of the fixes have worked for me not even system restore.

    Hi percepter,
    Welcome to the HP Support Forums! 
    I understand that you have developed a problem with your speakers and your headphones for your HP Pavilion g7 Notebook PC. I will try my best to help you with this.
    I suggest following the steps in this document for Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7 for preforming a Windows sound test, to see what is causing this issue.
    I hope this helps, please let me know how it goes.
    Thank you and have a great day!
    I worked on behalf of HP.

  • Airport Express - Multiple speakers

    I have 3 airport express connected to 3 different stereo systems. When I use only one speaker, everything is ok. When I use 2 speakers, the signal stops for 2 seconds about every minute. When I use 3 speakers, signal stops for 2 seconds very frequently.
    On "advanced settings" of iTunes the streaming buffer is "large".
    Any idea to solve the problem ?
    Thanks

    Hello
    I have experienced about the same problem with 2 AE´s.
    Never had the problem before upgrading to the multiple speaker
    option that came with one of thr itunes upgrades. But then I could only play one at a time, the idea is great but its no fun if the music stops every few minutes
    Have you been able to fix your problem ?
    I am using a Netgear Rangemax for my WLAN.
      Windows XP  
      Windows XP  
      Windows XP  

  • Itunes freezes when streaming music to airport express and to loewe air speaker at the same time?

    Hi,
    (first post )
    I was recently offered a Loewe Airspeaker. I already had an Airport Express connected to a hi-fi system.
    The Airport Express + hi-fi is in the living-room and the Loewe Airspeaker is in our bedroom.
    Both are connected to my network via wifi.
    I was trying to stream music from my iMac to both the Airport Express and the Loewe Airspeaker.
    When doing this, I am able to get the same tune on both devices, but iTunes systematically freezes
    =>music continues to be streamed but interface on the iMac gets the endless multicolor wheel !
    Has anyone seen anything similar before, for ex. is there a similar issue when streaming music to 2 different Airport Express?
    Any idea on where this is coming from?
    Any idea on how to prevent this?
    Thx in advance
    Rodolphe
    A few precisions on the configuration:
    the iTunes library and corresponding music are located on a Mac Mini configured as a media server.
    The iMac connects to the mac mini via wifi (shared folder). Home network is organized via an Airport Extreme.
    Both computers run Mac OS 10.7.2 Lion and are up to date.

    Well, repying to my own post... Might have found the solution: I tried to do the same with a Macbook Pro 2010 using the very same setup. And it worked perfectly! No freeze, no nothing.
    One explanation I see:
    my iMac is dating back to May 2007, a Core 2 Duo 2,16Ghz with 2 Go of RAM.
    So the computer's characteristics (or the Wifi component or the combination of all of this) might be not robust enough to allow streaming to those 2 devices...
    Anyone's got anything to add?

  • Can an airport express support wireless and wired connection at the same time

    im wondering if i can use wireless and wired connection at the same time

    The Ethernet port that the old AirPort Express has got is to connect the AirPort Express to your modem, not to connect another PC or Mac, so you can only connect wireless devices to the AirPort Express.
    If you have the new AirPort Express, you can connect a wired PC or Mac and more wireless devices or computers at the same tiem

  • Multiple speakers won't work at the same time

    I have the remote speakers button at the bottom of the iTunes window, and can select My Computer and the Stereo individually, but only the Stereo will play when I try to play both at once.
    Windows XP Pro, SP2
    No firewall on the computer, just the router connected to the Internet
    Any ideas?
    Thanks,
    Jim

    I've developed a similar problem with this. I used to use multiple speakers with my AX fine when connected to my digital stereo input using an optical cable. Now I've moved things round and plugged my computer direct into this stereo, using the AX with another analogue one in a different room. It worked to start with, then got flaky and now doesn't work at all. Again, works fine when using just the AX, but not with multiple speakers. I'm wondering if this is a reception thing, except that on its own the AX streams flawlessly. Firewall on or off makes no difference. And also the red light of the optical input comes on when it's on multiple speakers. I wonder whether this is still defaulting to just sending the optical signal somehow. Wondering about resetting the firmware on the AX.
    Will let you know if I get any progress.
    Ben

  • Airport express: use internet and air tunes at the same time?

    Hi,
    I'd like to use and airport express to create a wirelss network (and so use the internet) AND stream music to my stereo with air tunes - at the same time. Is this possible? So far, I have been able to create a wireless network (and use the internet) OR use the airport express to play music. But whenever my internet works, itune can't find the base station - claiming it "can't be found on the network?"
    Can you do both at once?
    I'm connecting to an ethernet jack (I'm at a college). It's not a cable modem or DSL. Is this the problem?
    Under "music" in the utility configuration. I've selected "Enable Air tunes at the base station." I can't select "Enable Airtunes over ethernet port." When i try to change the network options to allow me to select this "ethernet port" option, I have to tell it how to "distribute IP" addresses. i don't know how to do this, and everything I've tried destroys my internet connection.
    I appreciat any help you have to offer. thanks
    1.5 GHz PowerPC G4, 12'' powerbook   Mac OS X (10.4.4)  

    solution:
    My problem ended up being specific to the network I'm using. There is evidently another router on the ethernet system that was assigning my airport express an IP address (192. ...), rather than letting the network DCHP give me a direct IP address (something like 160. ...). The 192 address made it impossible for iTunes to see my express base station, but I was getting internet, passed through this other router.
    The fix - and I'm not sure if this is totally kosher - was to manually enter a correct IP address for my base station. I got the IP address by seeing what this other router was sending my computer to get onto the internet. It gave me the correct router and a workable (160. ...) IP address. I'm not sure if I'm supposed to manually pick an IP address on the ethernet, but this one is working for the time being, and now iTunes can find my base station.

  • HT2508 Airport express for more than one device at the same time.

    I just set up my Airport Express on my MacBook, but when I try to use this wireless connection on my iPad, I have to disconnect from my existing connection on my MacBook first. How can I use both devices at the same time without having to disconnect?

    Hi,
    Yes.
    Jim

  • Can't play MIDI the same time as any other sound.

    Hello there.
    I am a bass player and therefore I use GTick from [extra] as a metronome and TuxGuitar from [community] as GuitarPro tablature reader. I have a problem with (at least) this two programs: when I try to start the metronome or to play a tablature, I get error messages if any sound is playing, no matter if it is Amarok playing music, or TuxGuitar playing a tablature.
    For non-musicians, a GuitarPro tablature is a transcription of a song which can be played through MIDI at the same time as you can see the partiture, or the notes played on an image of a guitar neck or a keyboard.
    This happens every time I want to play some MIDI from this two apps: if I have a tablature open with TuxGuitar I can't play another tablature on another instance of TuxGuitar, or even start GTick to play alone with the metronome. I have to close TuxGuitar and start GTick, or open the other tablature in the same instance of TuxGuitar, which is annoying when, for example, trying to compare two tablatures of the same song.
    This makes me think that my system can't play any MIDI when some other sound is playing, but I don't know any other MIDI apps to try. Any ideas on how to setup multiple MIDI playing? I've read on the Wiki [1] that it was necessary to enable dmix some time ago to allow multiple programs play sound at once, but this is not necessary since ALSA 1.0.9rc2, and I have alsa-lib 1.0.17a-1.
    Thank you in advance.
    Bye!
    [1] http://wiki.archlinux.org/index.php/All … ing_system.

    Surgat_ wrote:What does "rewrite ALSA so it software-mixes OSS" mean?
    It means, "do some horrendously geeky stuff which only a very small proportion of the population have the knowledge, competence, ability and free time to do for no pay."
    You're looking for an easy solution. There is no easy solution.
    It's the app that says "ALSA-compatible", and it's the app that I'm criticizing for that statement. Not you.
    Welcome to the ridiculous world of Linux audio - see jungle and my recommendation. This is what free software produces - an unholy mess of conflicting, contradicting and overlapping standards.
    Last edited by brebs (2008-10-01 21:04:34)

  • Airport Express - using range extender and Ethernet at the same time?

    So, I am thinking of buying an Airport Express. I am would be using it to extend the range (wirelessly) of my current Wi-Fi and also use the Ethernet ports on the back to connect my DVD player (so I can use the Internet-enabled apps on it). My question is whether the Airport Express can extend the range of my Wi-Fi as well as provide an internet connection to my DVD player simultaesnously.
    My current setup in my house is:
    - A wireless modem from my ISP (www.telenet.be)
    - A Cisco range extender - however, this one often drops the connection so the Airport Express would be a replacement for this.
    The current Cisco range extender is plugged in near my TV and it picks up the wireless connection from my ISP modem and extends it as well as being connected to the DVD player. However, I am tired of losing the connection so I thinking of buying an Airport Express.
    I have no other Apple network devices (Airport Extreme, Airport Time Capsule, etc.)
    Can you help me out?

    No, Apple products will only wirelessly extend the signal from other Apple products.
    Another way of saying the same thing is that you must have two Apple AirPort routers if you want to extend the signal wirelessly.

  • How multiple users can open and update it same time in Sharepoint 2010, excel file

    we are using SharePoint 2010, multiple users can open and update the file at same time in SharePoint, I have searched a lot and
    read it, some suggestions were can create the file as share work book and then save on Share point and other were its supported only with Office web Apps, Excel Web App, we don't have office Web apps or excel web app, is there any other suggestion,
    any help will be great, thanks in advance

    Hi,
    You need office web apps for co-authoring, see Software version requirements for co-authoring in SharePoint 2013 and SharePoint Online section in below link -
    http://technet.microsoft.com/en-us/library/ff718249(v=office.15).aspx
    and
    http://office.microsoft.com/en-us/sharepoint-foundation-help/document-collaboration-and-co-authoring-HA102772333.aspx
    Edit: Link for SP 2010
    http://technet.microsoft.com/en-us/library/ff718249(v=office.14).aspx
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How can I load multiple compositions, all to play at the same time? eg 3 slideshows

    Hi
    Hoping someone at adobe edge animate can help me with some custom code as I need to load 3 different compositions all onto the same webpage.
    I have been through the Bootstrapper instructions thoroughly and have tweaked the code to try to get it to do what I require but I still can't make this work.
    I have 2 slideshows one footer one banner and also a small logo animation.. all need to reload and loop continuously.
    So far I have managed to get all three up but they all interfere with each other and none are playing properly.
    This is an urgent job for a client so I would really apprecaite some help.
    Thanks.. !
    Alayna.

    hi alayna,
    its definitely possible - see this sample:
    http://salesdigital.com/multiedge/
    3 edge compositions in one html page
    just check the page source code - in the head tag - it's not as bad as you think..
    hope this helps!
    ~keith

  • Two external FW drives - Can't mount both at same time?

    Hi, I just got two new 200 GB ATA drives and I've installed them in two separate cases. I have managed to get both drives formatted and mounted, but only one at a time. If I have one drive switched on and mounted, as soon as I switch the other one on, the system hangs and I get the beach ball. If I then switch off the drive I just put on, things return to normal. If I unmount the first drive and switch it off and then turn on the second drive it mounts normally.
    I have another FW drive with a different type of controller in its case (Oxford Semiconductor Ltd). I can mount that no problem and then mount either of the two new drives. The only thing I can't get to work is the the two new drives in their cases made by the same manufacturer. System Profiler says that the external cases contain Prolific PL3507 Combo devices.
    I have tried every way of connecting the drives - i.e. two cables one from each drive to each FW port on my computer and also daisy chaining the drives, but I still can't get the two new drives to mount together. If I use my old FW drive and one of the new ones, I have no problem getting them both to mount with two cables or daisy chained.
    So I'm stuck now - any advice I can get here will be greatly appreciated. Thanks in advance.
    Powermac G4 MDD 1GHz DP   Mac OS X (10.3.9)   2 GB RAM

    Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
    Thanks again for your post. Cheers from Bonnie Scotland.

Maybe you are looking for

  • Problem with blocked native processes

    My application relies heavily on native processes so that I am trying to implement fallback strategies if a native process doesn't work as expected. While creating test scenarios I had a problem with handling errors caused directly by the start() met

  • Language Conversion for Adobe form using Web Dynpro

    Hi, I want to convert the whole adobe form which have created in English to some other language using web dynpro. Is it possible. Please help me on this. Thanks & Regards, Gaurav Mittal

  • I have no audio when i video stuff

    No audio on my videos any ideas? already reset it

  • Can't Apply Hotfix?

    I'm trying to apply the cumulative hotfix 3 (chf7020003.jar) to my instance of Coldfusion MX 7. I've uploaded it through the admin screen, submitted, and then restarted all of the ColdFusion services, but the update level in coldfusion's administrato

  • How to embedd barcode into the PDF output

    Reports 9i documentation indicate that now it's possible to embedd barcode font into the generated pdf report output. Anybody done this or have any example how to do it ? Any help will be great. (tryed to play with the uifont.ali file - no luck.)