ITunes/Airport Utility Windows cannot connect to Airport Express

I really hope someone can help me with this since I have spent 2 days trying to get my new Airport Express to stream music with no luck yet.
I have a wireless network using Netgear WGR614 with WPA security settings. The AE has V6.3 firmware update and I used the Airport Admin 4.2 to set it up. I tried all the recommendations here and connected the AE to the router LAN port using ethernet cable and did a factory default reset. I then configured it to join my existing wireless network providing the WPA details.
That is when the problem starts. After successfully updating and rebooting the AE shows solid green LED. However, using Airport Admin to connect fails intermittently with error -6753 asking me to check my network settings even though they are fine. If I try a few more times, it connects and I am able to enter and modify settings. When doing another update, it again fails with error -6753, but a few retries later, it does go through. Note that all this time, the ethernet cable is still connected to the AE even though it is setup to connect to my wireless network.
Now, I unplug and relocate my AE near my stereo - it starts up fine and shows solid green light. My router "attached devices" page indicates that the device is connected with the DHCP ip address of 192.168.0.3. However, when I now try to use Airport Admin, it ALWAYS gives me the connection error -6753. The AE shows up in iTunes, but when I connect to it, it just hangs and after a minute or so, just gives up and goes back to the "Computer" speaker.
I tried to do a ping on the ip address, and it gives me "Request timed out". I thought maybe it is my laptop interfering so I did ensure that I turned off ALL firewalls, but the problem still remains.
So in short, AE seems to be joined and connected to my existing wireless network (green light), but neither Airport Admin nor iTunes nor ping utility can even communicate with it; and it seems to be due to the error -6753. I have tried pretty much every advise regarding connecting via wired etc. and nothing seems to work. This is not a wireless interference issue too, because the error also appears when connected via cable.
Any help really appreciated.
Thanks.
R

Thanks for the response. Here is an update:
I tried to connect to the AE from another windows laptop...and it worked. So it seems that it is only my laptop that cannot connect to the AE. The only difference is that I used my laptop to initially connect to the network created by the AE, and after that I could never get it to connect.
Interestingly, when I did manage to get into the AE and check its log, here is what I find...
Jan 1 00:00:00 5 Configuration updated.
Jan 1 00:00:01 5 Initialized (firmware 6.3).
Jan 1 00:00:15 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 00:00:16 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 00:00:30 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 01:14:29 5 Disassociated with station 00:09:5b:fb:7c:7a (message integrity error).
Jan 1 01:14:38 5 Disconnected from network.
Jan 1 01:15:31 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 01:15:31 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 01:16:14 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 01:27:18 5 Connection accepted from ::ffff:192.168.0.6/1153.
Jan 1 01:27:24 5 Connection accepted from ::ffff:192.168.0.6/1154.
Jan 1 02:35:43 5 Deauthenticated with station 00:09:5b:fb:7c:7a (leaving network).
Jan 1 02:35:43 5 Disconnected from network.
Jan 1 02:35:49 5 Disassociated with station 00:09:5b:fb:7c:7a (message integrity error).
Jan 1 02:35:49 5 Joined BSS 00:00:00:00:00:00
Jan 1 02:35:51 5 Deauthenticated with station 00:09:5b:fb:7c:7a (4-way timeout).
Jan 1 02:35:51 5 Disconnected from network.
Jan 1 02:35:59 5 Disconnected from network.
Jan 1 02:36:52 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 02:36:53 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 02:37:07 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 02:50:49 3 Administrative access denied to ::ffff:192.168.0.2/2397.
Jan 1 02:51:08 3 Administrative access denied to ::ffff:192.168.0.2/2400.
The administrative access denied is pointing to my laptop, whereas the connection accepted was the other laptop from which everything works. So it seems that the AE is specifically not allowing my laptop to talk to it! Given that my AE is being connected in Client mode, there are no settings I can access to see why it has singled my laptop out.
Any help appreciated.
Thanks
R

Similar Messages

  • I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

    I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

    Welcome!
    Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
    To get fast wireless without buying more than one thing, consider this:
    http://eshop.macsales.com/item/Edimax/EW7722IN/
    It goes in an available PCI slot
    There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
    USB wireless "dongle:"
    Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
    USB PCI adaptor:
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
    Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

  • Airport Utility Can't Connect to Airport Express For Set-up

    Hello,
    I have a first gen Airport Express and and am setting it up via the Airport Utility on Windows 7.
    The Airport Utility sees the new device, which is currently set to factory. When attempting to a connect to do the guided set-up it fails to connect reporting a "error -4". The Airport itself is blinking amber.
    The kicker is though, the wifi works just fine. Just the network has a generic name and is unsecured.
    How can I get the Airport Utility to connect to the Express so I can estblish a network name and a security key?
    Thanks so much!

    I think it was just a issue with the Airport Windows utility. My girlfriend came over and fixed it with her iPod Touch of all things, took her like 30 seconds to set a name and establish a password. Ive never had a issues setting up a router wirelessly before, in fact many don't even come with software any longer in favor of just instructing you to punch in a special url into a browser.

  • Airport utility can't connect to Airport express station

    My AirPort utility has problems to connect to my AirPort Express station (old model a/b/g; old firmware 6.1).
    First problem was, that it could not read the configuration. After a factory rest like described here: http://docs.info.apple.com/article.html?artnum=108044 the utility comes one step further and asks me for a password: I tried "public" several times, but it asks me over and over again for a password. What i my problem?

    Problem solved: I downgraded the AirPort utility to 5.0. Then I was able to access the AirPort Express station. Upgraded the firmware to 6.3. Then the station was recignized by AirPort utility 5.3.1 again. Connected it to the AirPort Extreme as AirTunes-station. Works perfectly.

  • AirPort Utility won't connect to AirPort for configuration

    I was playing around earlier today with port mapping/static IP assignments, configuring my BitTorent client, when my AirPort network started to keep dis/reconnecting at regular intervals. I stopped what I was doing, and decided to reset the APX and start from scratch, and leave things as they were.
    *The problem is, AirPort Utility often doesn't recognize the APX at all, and if it does it won't connect within the utility in order to configure the APX.*
    This is strange, because after a hard reset, the AirPort icon in the menu bar shows will often connect to the now-generic, out-of-the box name Apple Network f790b07 but STILL AirPort Utility will NOT 'join network' in order to configure the APX.
    HELP!

    bump

  • Time Capsule 4 gen. with iMac OS X Lion   3 Windows PC (XP OS, Vista OS, Seven OS) cable modem with TC as Wi-Fi. Time Machine on iMac found TC for backup easily. Have Wi-Fi access on PC XP with Airport utility but cannot create TC.

    Installed today Time Capsule 4 gen. with iMac OS X Lion. I also have  3 Windows PC (XP OS, Vista OS, Seven OS). Internet Access is cable modem with TC as Wi-Fi. Time Machine on iMac found TC for backup easily. Have Wi-Fi access on PC XP with Airport utility but cannot create TC. Does the Airport utility under Windows is way to access backup capabilities with TC ?

    The TC is really just an external networked hard disk plus router.. you can access the hard disk and place files on it from any computer. You can backup any computer to the TC but it will have to use a backup software in windows.. there are literally thousands available. The built in msbackup is horrible.. but you can download lots of different software and buy then online for not a lot. Macrium Reflect has a free disk image backup, and when you pay for it includes incremental. I think disk images are well worth it, as they recover much better.. and their is a proper method of recovery using a boot cd.
    BTW the TC space is not endless. And it is designed to hold a large number of incremental backups.. so anything you do in backing up several machines will make the number of backups limited. Remember you can also use a usb hard disk plugged in as a Network accessible disk. But it has to be formatted HFS+ or Fat32.. the later being highly undesirable.

  • We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    No, not all network clients -- only the two mac portables and they run together very rarely. The windows machine is hardwired to the modem router combo, and that's always sailing smooth. The mbp that is most used is perhaps 20 feet max from the router - and in another room. But it also happens when I take in into the same room as the router. On occassion, I have noticed while using network diagnostics, that one digit in the IP number sometimes appears to go awry. I then try to set up manually - and it works for a bit but is hugely erratic.
    I rigged a hand me down airport express and set up a separate network for the two macs and it ran beautifully for some weeks, but that little piece is now dead and none of the retailers in my suburb seem to have one in stock. I don't want to be forced to buy an airport extreme and here in India, there's no trustworthy online ordering option.
    The man from the ISP's been here several times and I don;t think it is a modem/dsl issue because the smartphone connects and the macbook drops when both are the same distance from the router? I am truly foxed and intensely irritated! :-(

  • If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo.  When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.

    If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo.  When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.  I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing.  Thx

    Yes. Unfortunately the stereo is too far from the wired ethernet connection   My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless).  The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers.  I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo.  The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
    When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off.  When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
    Maybe that explains my problem better.

  • Where has my airport utility window gone ? when I double click on the icon all I get is an image of a globe and a base station with no options to make changes in my airport extreme.

    Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further  options available to modify my airport extreme. 

    Sorry, you lost me on that last post.
    Let's start over again.
    Open AirPort Utility on your Mac
    Are you asked for a password at this point?  If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
    You need that password to be able to access the settings for the AirPort router in AirPort Utility.
    If you see a window listing basic information, click Edit in the upper right corner of the window.
    If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
    If you forgot the password, a Soft Reset will allow you to go in and reset the base station password.  Might be a good idea to write down that password.
    If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
    If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button.

  • After I upgrade the AirPort utility, I cannot share my internet to my iPhone anymore.

    After I upgrade the AirPort utility, I cannot share my internet to my iPhone anymore.
    Please help me~~
    軟體版本：
      CoreWLAN：          2.1.2 (212.2)
      CoreWLANKit：          1.0.3 (103.2)
      附加選單：          7.1 (710.1)
      設定外掛模組：          7.2.1 (721.3)
      系統描述：          7.0 (700.3)
      IO80211 系列：          4.2 (420.3)
      WiFi 診斷：          1.0.2 (102)
      AirPort 工具程式：          6.1 (610.31)
      介面：
    en1：
      網路卡類型：          AirPort Extreme  (0x14E4, 0x8C)
      韌體版本：          Broadcom BCM43xx 1.0 (5.10.131.36.15)
      MAC 位址：          xx:xx:xx:xx:xx:xx
      地點：          RoW
      國碼：          US
      支援的 PHY 模式：          802.11 a/b/g/n
      支援的頻道：          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
      使用無線功能喚醒：          支援的
      AirDrop：          支援的
      狀態：          無關聯

    Welcome!
    Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
    To get fast wireless without buying more than one thing, consider this:
    http://eshop.macsales.com/item/Edimax/EW7722IN/
    It goes in an available PCI slot
    There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
    USB wireless "dongle:"
    Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
    USB PCI adaptor:
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
    Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

  • HT4145 Does this article apply to OS X Lion and Airport Utility 6.0?  Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

    Does this article apply to OS X Lion and Airport Utility 6.0?
    Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

    I thought you were trying to Extend the network with an Express as the article mentions you pointed to...
    You can't find the Airport Extreme then...
    I woudl suggest doing a Factory reset....
    http://support.apple.com/kb/HT3728
    Then you should be able to set it up just as you did when it was new....
    Factory default reset (using reset button)
    If the AirPort Base Station or Time Capsule isn't accessible from AirPort Utility, the Factory Default reset can be accomplished by using the reset button.
    Unplug the AirPort Base Station or Time Capsule from power.
    Press and hold the reset button with a pen or pencil, then plug the AirPort Base Station or Time Capsule back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
    Release the button. This will factory default reset the AirPort Base Station or Time Capsule.

  • Airport Utility has trouble connecting to my Airport Extreme

    I have a home network with two airport extremes (a dual band airport extreme as my main router, and an older one I use to extend the wireless network). I also have a few airport express units that I use for Airtunes.
    My network is working perfectly, but Airport Utility won't connect to my main Airport Extreme. If I click on the router inside of Airport Utility and try to modify any settings, it shows "Reading the Airport Extreme configuration ..." and hangs there. After a few minutes, it gives up.
    It is the new dual band version, and it is directly connected to my Mac Pro via ethernet. I can use Airport Utility to connect to all my other routers without any problem (and all traffic has to route through my main airport extreme since my Mac Pro does not have wireless).
    If I reboot my main router, Airport Utility is able to connect to the router for a few hours before it becomes unreachable again.
    Its not a huge problem ... I just need to reboot it when I want to modify / check settings, although rebooting the router does disturb a lot of things on my network which is annoying (VPNs, network drives that need to be reconnected, etc.).
    Other than Airport Utility not being able to connect to the router, the router seems to be working perfectly.
    The router used to work perfectly, but it started doing this about 3 months back. As far as I can remember, there were no firmware / software updates that might have caused the problem ... it just started happening all on its own.
    Ron

    Hi Shadow99999
    Did you ever resolve your issues with disconnection between your Mac Pro and Airport Extreme? I am having a similar issue.
    I have had the extreme for about 4 months and I loose access to the internet about once a month. When I try to troubleshoot the Airport Extreme it is usually inaccessible from my Mac Pro which is my wired access point. The Airport Utility times out with a network error number that unfortunately I did not write down. The light is still green but nothing seems to be working. The first time I tried plugging and unplugging ethernet wires and accessing wirelessly through a Macbook but now I just unplug the Airport Extreme and replug (a Microsoft solution with no problem resolution.) Today I had some unusual internet traffic on my DSL modem and I wanted to look at the Airport Extreme but again I was unable to get to the Airport Extreme with the Airport Utility on my MacPro. (Everything up to the latest rev. per software update.)
    The lack of access between the Airport Extreme and a wired computer is really frustrating and may drive me back to my trusty five year old Buffalo Airstation. I could at least log in when I suspected there was a problem. Loss of internet access with the Buffalo was down to maybe once every 6 months to year and lock ups to wired access even rarer.
    Any other thread that you found to help you resolve your problem?
    Message was edited by: Karl Seibert

  • AirPort Utility doesn't find my AirPort Express but wireless still works

    I'm having problems configuring my AirPort Express. My main computer is a desktop running Windows XP and is connected to the internet via a Netgear router. I have the AirPort wired to the same router. I used the AirPort Utility to set up the AirPort originally but now the utility program can't find the AirPort. The wireless is still working as my macbook can still connect to the internet and the green light on the AirPort remains on. The macbook can also use the AirTunes function of iTunes while the desktop cannot. I've updated AirPort Utility to the most recent version without any luck. I assume its more to do with the router but I'm far from a network expert. Any ideas? Thanks.

    I'm having this exact same problem. I am using an HP notebook computer running Windows XP. My computer can connect just fine via wireless to the Airport Express. However, the Airport Utility cannot see the Airport Express no matter what I try. I have downloaded all the latest versions of software. I have tried doing a soft reset of the Airport Express. I have tried doing a hard reset of the Airport Express. I have tried resetting Airport Express defaults back to factory settings. I have tried connecting to Airport Express via Ethernet cable attached to my router. I have tried configuring a fixed IP address in the same range as the default IP address settings for the Airport Express. None of this gives me the ability for the Airport Utility to see the Airport Express. Any help please.

  • Airport utility can not find my airport express...

    Airport utility can not find my airport express...
    I was trying to connect a PC  (Windows XP) laptop to my wireless network via the airport express.
    I have a Mac with an airport that I use to get internet in my other room.  I am trying to get internet on the laptop too.
    I somehow manage to erase my network & now my airport utilities won't even scan/recognize my airport??
    ANY help would be appreciated, mac helpline wanted $59 to help & I live in a small northern community where they do not have anyone that will address a Mac issue!!
    Thanks for your time.

    Thank you SO MUCH Tesserax for taking the time to help!
    I powered everything down, slowly powered everything else up from the modem to the airport then the computer.  I then reset the airport & rescaned it through utilities.  I set up a new network & voila!  wireless up & running again.
    I am going to try to connect the laptop to the network now.....well, mabey tomorrow night, I've had enough for 1 evening!
    I will update....or possibly be begging for more help...we'll see!
    Thanks again for your time!

  • My Airport Utility doesn't see my Airport Express??

    My Airport Utility doesn't see my Airport Express. . .so I cannot run iTunes. . it used to work fine. .

    Version of utility, and express? Makes a huge difference.

Maybe you are looking for