Itunes and AIM6 compatability issue

so my problem is that itunes opens but it freezes when i try to play a song i just recently installed AIM6 this happened before when i installed it so i removed AIM6. also i have itunes 7.6. can someone help me with this?
Message was edited by: Zachg

Hey there
smrt.neha31,
It sounds like you want to disable the Automatic Downloads from the iTunes Store and App Store on your iPhone. Take a look at the article linked below, it provides information that should help you both enable and disable the feature.
Enable Automatic Downloads - Apple Support
So long,
-Jason

Similar Messages

AX and WinXP compatibility issue

Hello,
i got my secondary WinXP Pro C2D SP2 Laptop to work with AX without problems. I can see Loudspeakers in iTunes and also my iPod Touch is seen as a remote controller.
This works both with WLAN and Ethernet cable connected to my ADSL Router.
AX light is green and it doesn't give any errors.
Problem:
With my primary PC, WinXP P4 SP2, AX doesn't work at all. AirPort Utility doesn't recognize AX to the list. Neither i can see my IPod Touch Remote controller in this primary PC. I wonder if this could be a common problem for both ?
Equipment and connections:
TeleWell ADSL Modem Router with WLAN 802.11 b/g
Airport Express with 802.11n, ver. 7.3.2
AirPort Utility, ver. 5.3.2 in both WinXP PCs
iTunes 8.0.20 in both WinXP PCs
AX working as a client in existing wireless network
With primary PC i have tried following combinations to get AX to Airport Utility list without success:
1. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with Ethernet cable
2. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with WLAN
3. PC connected to ADSL Router with WLAN and AX connected to ADSL Router with WLAN
Both Windows and my Zonealarm Firewalls are off.
No Firewall active in ADSL router.
WLAN security is off (no WEB/WPA used).
AX gets its IP address and AX is also seen in ARP table. This can be seen in ADSL Router. Ping works normally to AX from both PCs.
After these tryouts i'm thinking if this is somekind of compatibility or 3rd party program issue that i have on my PC. Specially because both iPod Touch Remote controller and AX doesn't work in this primary PC, but they work in a another one ?
I have read already quite a many of threads from this forum but haven't found a similar case.
Does anybody have an idea what this problem could be ? Could some other installed programs disturb iTunes/iPod Touch/AX usage ?
One clear difference there is between the PCs, primary PC (that who's having problems) has German OS and secondary English OS. I doubt anyhow that this could be a problem.
Greetings from snowy Scandinavia and thank you for your support,
Petri
Message was edited by: easterson

Hello,
i got my secondary WinXP Pro C2D SP2 Laptop to work with AX without problems. I can see Loudspeakers in iTunes and also my iPod Touch is seen as a remote controller.
This works both with WLAN and Ethernet cable connected to my ADSL Router.
AX light is green and it doesn't give any errors.
Problem:
With my primary PC, WinXP P4 SP2, AX doesn't work at all. AirPort Utility doesn't recognize AX to the list. Neither i can see my IPod Touch Remote controller in this primary PC. I wonder if this could be a common problem for both ?
Equipment and connections:
TeleWell ADSL Modem Router with WLAN 802.11 b/g
Airport Express with 802.11n, ver. 7.3.2
AirPort Utility, ver. 5.3.2 in both WinXP PCs
iTunes 8.0.20 in both WinXP PCs
AX working as a client in existing wireless network
With primary PC i have tried following combinations to get AX to Airport Utility list without success:
1. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with Ethernet cable
2. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with WLAN
3. PC connected to ADSL Router with WLAN and AX connected to ADSL Router with WLAN
Both Windows and my Zonealarm Firewalls are off.
No Firewall active in ADSL router.
WLAN security is off (no WEB/WPA used).
AX gets its IP address and AX is also seen in ARP table. This can be seen in ADSL Router. Ping works normally to AX from both PCs.
After these tryouts i'm thinking if this is somekind of compatibility or 3rd party program issue that i have on my PC. Specially because both iPod Touch Remote controller and AX doesn't work in this primary PC, but they work in a another one ?
I have read already quite a many of threads from this forum but haven't found a similar case.
Does anybody have an idea what this problem could be ? Could some other installed programs disturb iTunes/iPod Touch/AX usage ?
One clear difference there is between the PCs, primary PC (that who's having problems) has German OS and secondary English OS. I doubt anyhow that this could be a problem.
Greetings from snowy Scandinavia and thank you for your support,
Petri
Message was edited by: easterson

Can someone provide HTML and CSS compatibility issues list in IE 12?

Hi There,
We recently come to know from our team members that Microsoft going to release Internet Explorer (IE) 12. But there are some compatibility issues with HTML and CSS which can break our web sites. Can someone provide us list of issues that we can face in IE
12, so that we can work on their resolution.
Regards,
Ankush

Hi,
http://status.modern.ie
or
f12>Console tab>
document.body.style
Rob^_^

Seagate ST9750420AS HDD and W700ds compatability issue

There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
ST9160823ASG
ST9500325AS
ST9500420ASG
ST9500420AS
ST9640320AS
These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
And not compatable with:
ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
Any comments, corrections or resolution welcom.
Thanks
JMG

Hi Jamessts,
Welcome to the HP Forums!
I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
Please post back with the results of your troubleshooting, and I will diligently follow up with you!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Itunes and app store issue

i have reset the settings once in my iphone 6 . updated to iOS 8.1.2 but recently faced issue in itunes and app store as it wont shut down the automatic downloads. what to do?

Hey there
smrt.neha31,
It sounds like you want to disable the Automatic Downloads from the iTunes Store and App Store on your iPhone. Take a look at the article linked below, it provides information that should help you both enable and disable the feature.
Enable Automatic Downloads - Apple Support
So long,
-Jason

Vista "Problem Reports and Solutions" - Compatibility issues?

The Visa +Problem Reports and Solutions control panel+ is reporting three problems which I cannot seem to be able to find a resolution to.
( So far I've just installed Vista 32 business ed. on my iMac 20". Installed bootcamp drivers, updated bootcamp to 2.1 and applied Vista updates.)
*The Problem Reports and Solutions control panel reports the following:*
1. Download and install the driver for Apple performance counter
This problem was caused by Apple performance counter, which was created by Apple Inc..
2. Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows. This problem was caused by a compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and this version of Windows. Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 was created by Intel Corporation and is distributed by Apple Inc..
3. Problem caused by Apple Desktop Null Driver.
This problem was caused by a compatibility issue between this version of Windows and Apple Desktop Null Driver. This product is usually distributed by the company that manufactured your device or computer. Note. If you bought Apple Desktop Null Driver from a retailer and installed it yourself, you will need to contact its manufacturer.
Are these genuine, and if so, is there a solution? No solutions are proposed by Vista itself.
Mac OS 10.5.5 , bootcamp 2.1
Message was edited by: noutram

A performance counter is not something that is usually in use by any application except by the developers of the unit itself. nothing to be alarmed about (well, except perhaps that it should have been removed).
A null driver is (as the name indicates) null, there is no functionality assigned with it. MS error message is just brilliant "there is an error in your null driver", like what, there is no functionality in a null driver. So no problems there either.
I got the 2 above error messages on the very first generation 17" MBP for ages and so far not seen any impacts in it for my work.
The Intel issue is interesting, it might be a good idea to see if Intel has an updated driver for the problem.

ITunes and Audible compatibility after transfer to new computer

I've had a serious compatibility problem between iTunes and Audible eversince transferring to a new computer. This after iTunes and Audible worked seamlessly for two+ years on my old computer.
At first iTunes would not accept my Audible username/password, then after reinstalling and updating both iTunes and Audible Manager I received a "you cannot authorize any more computers for this account. You must deauthorize at least one other computer . ." error message. I've deauthorized, then authorized my computer twice in an attempt to correct whatever is causing this (two computers are automatically authorized when I've done this) but I still get the "you cannot authorize . . " error message whenever I try to import my Audible files.
I'm using an external HD (from the old computer)as my music folder location for iTunes, however Audible is downloading to my computer's HD. Can this have something to do what's going on? I've also tried disabling the firewall with no success. Have also made sure Audible and Apple are both "allowed" in Firefox's content. Any suggestions on how to resolve this?

I would try copying over the tracks from your XP computer again as the files from the first transfer may be corrupted.
B-rock

Win 8.1 - ITunes and Ipod Touch issues

I am running a new Envy TS notebook with Windows 8.1. I upgraded (1/23/14) to iTunes 11.1.4.62. After installation I encountered the procudure entry point error when attempting to start itunes. Per an Apple discussion group, I did the following:
Copy QTMovieWin.dll from c:\Program Files (x86) Common Files\Apple\Apple Application Support
and paste intoc:\Program Files (x86) \ iTunes
This enabled iTunes to start but would not recognize my ipod. In Windows explorer, my ipod was listed only as Apple Ipod. I followed the recommendations to upgrade drivers to no avail. Finally I went to the control panel to uninstall the following Apple programs:
Apple Mobile Device Suport
Apple Application Support
iTunes
I then reboted the system and reinstalled iTunes and rebotted the system once again after installation.
Windows explorer now recognized my ipod as well as iTunes. In fact, now when I plug my ipod in a USB port, itunes automatically starts up and performs a sync with the ipod touch. Haven't had that happen for quite some time.

Hi JPM and Mlisowski ,
I-pods are the great mashines , but seem that some of the apple software do some mess in the win registries. They are running in the backround slowing a computer , and some times can do that Your other devices as a DVD reader just disapieres.
By my personaly experience , You can thry to use other (more windows friendly) free software to sincronyse Your i-pod,
and You may considere to check this page
http://mp3.about.com/od/essentialsoftware/tp/Top-5-Alternatives-To-Itunes-Best-Free-Software-For-Syn...
Since now , it solves some some problems for me.
Enjoy Your i-pod , GOOD LUCK , ad wish You all the best!!!
<<<<----------------- ***
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Itunes and Iphone sync issues

Hi There,
So I have a slight problem and would be grateful if someone would shed some light as to how I can overcome this.
I have an iPhone 5 and iTunes for windows, however, I have not downloaded the current software for the iPhone 5 as I do no have any storage space for it. I have recently tried to update my iPhone's music playlist but the playlist I want to sync is not, however, my old music and playlists keep syncing instead, and it keeps adding albums.In my new playlist I have approx 200ish songs whereas my iTunes is syncing over 700ish (and I've made sure I have not clicked and synced my library- my library has over 1000 so not sure where its syncing 700) I have tried several times to fix this by;
switching off phone
closing iTunes and opening it again
creating a different playlist and re-syncing music
de-selecting albums and artists manually
de-selecting all music then syncing
created a different playlist
and none of the above have worked at all
It would be much appreciated if anyone has any advice or guidance as to how I can fix this, as I have new music I want to listen to, and with this new music I'll have more storage space!
Thanks in advance!

Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Syncing manually
If you prefer not to automatically sync content to your device, you can set up manual syncing:
Connect your device to your computer and open iTunes.
Click the Devices button in the upper-right corner. (If you're viewing the iTunes Store, click the Library button in the upper-right corner. The Devices button will appear.)
In the main iTunes browser window, select the Summary tab.
Select the option to Manually manage music and videos or Manually manage music. This will deselect the automatic sync settings for the Music, Movies, and TV Shows tabs.
Click Apply.
And -
After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
Select your device.
Click On this Device.
Choose Add to in the upper-right corner. If you drag a song, video, TV show, or movie while viewing the media in your iTunes library, a sidebar will show up on the right. You can drag your content onto the device. You can also create and modify playlists directly on the device.
Thanks for using Apple Support Communities.
Best,
Brett L
Thanks for using Apple Support Communities.
Best,
Brett L

Corrupted itunes and re-downloaded issue

I have Windows 7 and my itunes randomely said it has been corrupted and I needed to reinstall it. When I did it then said the library cannot be read because it was created with a newer version of itunes. I am at a loss as to what to do. Please help!

Hi teachamen!
I have some information here that I believe will help to resolve your issue. First, since your library file says it was created by a newer version of iTunes, let's make sure the latest version is installed on your computer. In order to verify this, you may need to completely uninstall and reinstall iTunes on your PC. There is a group of components that must be uninstalled from your computer in a certain order when uninstalling iTunes for the best possible conditions, and that is outlined in this article right here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Then you will want to make sure you download the latest version of iTunes, which can be found here:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
After performing these steps, if you are still having issues opening your iTunes library, then you will want to see this article about re-creating your iTunes library file:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Thanks for using the Apple Support Communities!
Cheers,
Braden

MacBook (iTunes) and iPhone 5 Issues

This is not an actual question, though a complaint for Apple to know how dull their products can become over time. I've purchased my iPhone 5 (and then replaced it over the screen issues one year ago) and my MacBook Pro (13', late 2011, 2,8 Ghz) is just getting worse and worse in its overall performance (with Mavericks in particular).
One of my biggest complains is that music doesn't sync to my iPhone properly over WiFi. Since we live in 2014 for me it is very inconvenient to sync music via cable. Therefore I sync my music rarely (although I'd do it on the daily basis if not the issues I experienced so far) using a very inconvenient method of deleting all music from last sync and syncing the new music onto iPhone.
Macbook is another story. Since it was purchased three years ago I can't believe how such expensive laptop can't stand by its name. Everything became much more slower with Mavericks (start up of the system, app loading and etc.) Particularly iTunes is a nightmare - sometimes it can't see the device over the internet and always cancelling the sync when I'm uploading my music.
This is general complaint, not a question. I'm sorry for my english.

if this phone has never been jailbroken or hacked, try these steps as needed:
1. Settings > General > Reset > Reset All Settings
2. Get new SIM card from AT&T
3. Get new cable and charger from Apple
4. Restore iOS using iTunes, also restoring a backup
5. Restore iOS using iTunes as a new phone, without restoring a backup
Use iTunes to restore your iOS device to factory settings
iOS: Back up and restore your iOS device with iCloud or iTunes
If restoring as new doesn't help, there's a hardware problem that needs evaluation by Apple or an Apple authorized service provider.

Itunes and apple tv issue

i recently bought an apple tv device and when i download tintin on my computer and try to view it on my tv using home sharing an error message comes up asking me to authorize the computer. Which i did but it still doesnt work. help me plz

I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

Windows 7 and Director - compatibility issues?

I have the old Macromedia Director 7 and Lingo which worked great on XP and Vista - unfortunately it won't work at all on my Windows 7 Home Premium! I also have Adobe PageMaker 6.5 which also does not like Windows 7 (but as it worked well on the previous Windows versions I was loathe to purchase an upgrade).
I have tried to download the trial versions of the newer Director but nothing happens after you press the 'download' button - frustrating! I have removed the pop up bocker - I have even turned off my anti-virus software incase that was the issue - nothing works!
Is there ANYTHING happening in the future which will allow these products or their newer versions to run effectively on Windows 7?? This is 2012 for goodness sake - surely an update/upgrade would have been on the drawing board to keep pace with Microsoft?
If someone can assist me I would gratefully appreciate it!
Sahra K

I was just wondering, did you ever get any answers to this. I'm having the same problems with both Director 8.5 and DirectorMX 2004
[email protected]
Bruce

ITunes and iPad syncing issues?

I have songs that appear on my ipad (show iCloud songs is turned off so only songs on my ipad appear) but these songs do not appear when I connect the ipad to my computer when I view what music is on my ipad in iTunes. Same for several music videos. I am basically out of space on my ipad and I can't delete the music from my ipad. There were some songs I could delete by swiping, but the rest I can't delete. Because they don't show up in iTunes I don't know what to do. I have reset and the ipad is running iOS7.1. I appreciate any help!

The ipad will sync itunes content and pics from one and only one computer at a time. When you sync to another it will indeed erase the current content from the ipad and replace with content from the new computer.
You need to copy everything from your old computer or your backup copy of the old computer to the new one.

ITunes and keyboard backlight issues

Hi, i know that this question has been asked before, but was not answered, so ill try again to see if anyone has a solution.
When using iTunes, if i skip forward or backward a track, using either the iTunes GUI or the function buttons (F7 and F9) the back light on the keyboard will turn off completely. The only way, it seems, to turn the back light is to press the back light keys, which can be annoying to find when im working in the dark.
(also, strangely, when i press skip back once, ie restart currently playing track, the keys do not turn off, it is only when the track changes :s )
Thanks

I AM HAVING THE EXACT SAME PROBLEM! I recently downloaded iSpazz but I didn't like it and deleted the plug-in. Ever since then, my backlight has been turning off every time I change songs in iTunes. I have deleted the iTunes App completely, and all its related files and reinstalled it from scratch.. And still NOTHING! It is frustrating the **** out of me. Although it is only a minor problem, it is rather annoying! PLEASE help us!

Itunes and AIM6 compatability issue

Similar Messages

Maybe you are looking for