Itunes and network connection for remote speaker

I have three airport remotes that are all on line. On one of my computers when I try to access a remote speaker I get the message "network connection failed." I can play all three remotes from other computerswith ITunes but my main computer cannot access the remote speakers. Any suggestions? Thanks

I have the same problem with my computer running windows 7. I get the following error message; "unknown error -15000". The connection does not get established with my remote airport express access points

Similar Messages

TS1492 When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.

When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.

If you're really using iTunes 7.0 you are very far behind the current version - maybe it is trying to connect to a decomissioned server. In fact I am kind of surprised it will run on a Macbook Air. Are you sure you are running iTunes 7?

I cant update my iphone and i tried going on my pc on itunes and clicking check for update button but it says that "itunes could not contact the iphone software update server because you are not connected to the internet".plz help

i cant update my iphone and i tried going on my pc on itunes and clicking check for update button but it says that "itunes could not contact the iphone software update server because you are not connected to the internet". But i checked my internet on both my pc and iphone and tried again but it still says the same thing. plzz plzz help

Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
Regards,
Steve

ITunes timeouts when connecting to remote speakers?

When trying to connect to a remote set of speakers (Airport Express/Airtunes), iTunes times out. The set of speakers shows in the menu, iTunes attempts to connect for some time, and then "gives up" - there is no error message. Any suggestions?
iTunes 7.0.2, Airport Express firmware 6.3.
Thanks.

At times, instead of the time out, I get the following error message:
The remote speaker "Test" is not compatible with this version of iTunes
This happens even though iTunes and the Airport Express are up to the latest versions, respectively.
Thanks.

Error message (-3256) appears when connecting to remote speaker

An error occured when connecting to remote speaker. An unknown error occured (-3256).
ANy help would be most appreciated. Thank you.

I get the same message and have been stuck with this for weeks since upgrade to iTunes 8, now running 8.02 and did a firmware upgrade on airport express to 6.3 but still no joy...anybody got any other ideas ? I'm about to give up and move to sonos

Accept/Deny incoming network connection for apps already accepted/denied

i am constantly getting the dialog box to allow/deny incoming network connections for applications that i launch on my MBPro, even though these programs have already been allowed or denied. this causes multiple entries for the same applications in my firewall advanced list. each time i accept or deny, a new entry of the same program is added to the list. as an example, for Excel i have 5 entries - 2 that allow incoming connections, 3 that deny. the same goes for apps like itunes, word, nleac, and others.
if i delete these extra entries, they just get added to the next time i launch the program.
i've tried the remedy suggested by the macfixit forum (http://reviews.cnet.com/8301-13727_7-10330466-263.html) of deleting the firewall preference file "com.apple.alf.plist" and performing a disk permission under Safe Mode - didnt help.
looking for new suggestions. incidently, this wasnt always the case and other than upgrading to snow leopard, i cant specifically recall a change that started this problem.

i've been doing that for some time now, as this problem has been going on for months. even after i delete all of the programs that have multiple listings (and the key word there is ALL because basically every program that wants access has multiple listings here) the list gets re-populated the next/every time i launch that application. even if i later deny an application's request after accepting previously, they'll be multiple listings for that app - including listings to Allow and listings to Deny - for the the same app!!!

Error msg while downloading or visiting iTune store: "network connection was lost". Any idea about the problem?

I am getting for the last days a constant error msg while downloading or visiting iTune store: "network connection was lost" (sometimes also ways it was "reset" instead). But, the network is working (I can make othe rdownloads and visit to other internet sites). Any idea about the problem?

Mac server or Windows server? Have you checked her permissions/access vs another user not having the issue?

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

What will i do next if i reset my ipod touch manually and all i can see is logo of itunes and usb connection?i cant use my ipod now :c

what will i do next if i reset my ipod touch manually and all i can see is logo of itunes and usb connection?i cant use my ipod now :c

its to slow to connect..so i decided to run for diagnostic to know y if i cant connect to itunes eventhough i have account..heres the result:
Connection attempt to Apple web site was unsuccessful.
Basic connection to the store failed.
Connection attempt to Gracenote server was successful.
iTunes has never successfully accessed the iTunes Store.

DHCP Failover, one DHCP Server Partners Supnet is deactivated, Clients losing network connectivity for 3 sec. after renewing they IP Adress

Hello,
currently we are using two W2K12R2 DHCP server configured in "load balance Mode". On DHCP1 the IP-scope with failover partnership to DHCP2 is deactivated. DHCP2 is working fine. Now we register that 50 percent of our clients (W2K8R2 application
server) losing the network connectivity for 3 sec. after rereleasing they IP-Address. On DHCP2 servers eventlog we receive a lot of
BINDING ACK reject events 20291 and 20292 for these IP addresses entries.
These 3 sec. of loosing they Network connectivity is our big Problem because the Client application (W2K8R2 application server) cannot handle these timeout. It looks like a
DISCOVER-OFFER-REQUEST-NAK cycle that are described here:
http://blogs.technet.com/b/teamdhcp/archive/2014/02/26/dhcp-failover-patch-to-address-a-reservation-issue-and-another-issue-related-to-failover-partner-not-accepting-state-transition-from-bad-address-gt-active-has-been-released.aspx#pi47623=2
there is a solution to prevent the 3 sec network failure?
Rgds

Hi Steffen,
Have you applied KB2919355 in the server?
If issue persists, please check the detailed information about the event. It will tell us why does the server send the NAK.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I cannot get out of a frozen state on my iPad. It is showing Itunes and usb connection images on screen

PLease help me get my IPAD out of this frozen state. It is showing the Itunes and USB connection image. It will do absolutely nothing! HELP!!!

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?

How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?

Check out : http://helpx.adobe.com/flash/using/whats-new-cs6.html
In that click on "Choose network interface for remote debugging for AIR" section.
Hope it helps.

HT201210 I had an update message on my phone and I clicked yes to update. Now the phone has a picture of itunes and usb connection, but can't be used.

I had an update message on my phone and I clicked yes to update. Now the phone has a picture of itunes and usb connection, but can't be used. itunes says I have to restore my phone, but will lose all the data. Is there anything else I can do? I really don't want to lose all my pictures and other data.

It's in recovery mode. There is nothing left on the phone at all. If you didn't back it up before you started, your data is gone.
you have no choice but to restore at this point.

HT5312 im trying to make a purchase on itunes and its asking for my security question and i dont remember them its been years since i made this account how can i reset them

im trying to make a purchase on itunes and its asking for my security question and i dont remember them its been years since i made this account how can i reset them

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(98991)

Last week I found records of purchases for 3 files using itunes, and left money for my credit card, do not make such purchases, what the **** is going on? itunes is not safe?

ast week I found records of purchases for 3 files using itunes, and left money for my credit card, do not make such purchases, what the **** is going on? itunes is not safe?

Contact iTunes support at the link below.
https://ssl.apple.com/emea/support/itunes/contact.html

Itunes and network connection for remote speaker

Similar Messages

Maybe you are looking for