Itunes and pc formatting

Hi
I need to format my C drive and was wondering if i have to retain any folders to make sure my iphone 3g works ok afterwards, i've read that i need to keep a copy of my itunes folder to replace after re-install.?
Cheers

If you reformat your drive c; you will lose all your files so you need to back them up.
If you have a default installation of iTunes, copy the iTunes folder with all its subfolders.
Don't forget to deauthorise your PC before the reformat.
Once you have windows back, install iTunes then replace the iTunes folder in My Music with your backup copy before adding any other music. That should get your library back as it was. You will also need to reauthorise your PC.

Similar Messages

  • Why won't my iPod work on iTunes or my computer?  It shows up (not on iTunes) and the iPod shows connected but it has to be "formatted." And why are half my songs unable to play on it anymore?  It just skips them!

    I've read through several discussions and I've seen a lot of similar issues but none that were quite like mine.  Every time I plug my 3rd gen. iPod nano in it shows it connected on the iPod screen and iTunes opens up but the device does not show up in iTunes.  The icon on the iPod shows connected and gives the arrows circling showing syncing even though it still says connected.  But it won’t show up in iTunes.  It shows up on my windows computer but I can’t click it or make it do anything.  It keeps saying “You need to format the disk before you can do anything.”  And when I hit cancel it beeps and says "Location not available.  Dara error (cyclic redundancy check)."  As if I know what that means!!  And I have 800 songs on it but they aren’t all on my computer and some are on my parents’ computer but I can’t get to that one.  It shows it is a “FAT32” which I have no clue what that means but I’ve never noticed that before.
    Windows "can't access the disk" and I don't know why.  It gives me that notification if I try to check the drive or disk or device for problems.  And if you click it on Windows it pops up a screen with formatting things (which I don't know anything about).  And then it closes and says that it CANNOT format the device.
    The iPod works almost okay when it isn’t plugged in, but I’ve noticed that half my songs won’t play.  You click on it and it plays the next one in the album.  And it isn’t always the first song in an album but random songs.  And songs I listen to a lot.  You can’t go back (you can only go forward and you can’t skip over the ‘missing’ song) or even click to select those songs.  But other songs play normal, just not half of them that are on the iPod but all of a sudden no longer work.  And I don’t know why.  I have another 3rd gen. iPod nano that doesn’t have ANY of these problems.  It hooks up, it doesn’t need formatting, and all its songs play.  I don’t know what is wrong or what to do.  I’ve tried re-downloading iTunes and everything.  I don’t want to have to reset my iPod and lose everything.
    I’ve tried locating the device in iTunes and it shows the iPod but it gives this weird symbol and I can’t select it.  It’s like a white box with a box that is outlined in blue with six random icons in the middle.   I’ve seen it before and it always means something is wrong or a file (which is where I have seen it before) is corrupted.  And like I said I have a second iPod nano of the same generation and it does not give this weird symbol.  Plus it connects just fine.  It’s this one iPod.
    I don’t understand what is going on.  It worked just fine and then all of a sudden I noticed songs wouldn’t play so I went to plug it into iTunes and nothing has worked.  I’ve searched discussions and none of the tips help.  But I want my songs to play again and I want my iPod back.

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • Just bought a dell pc with windows 8. on my old pc (vista) i would right click a movie (in itunes format) and say open with itunes and it would play. Now it won't open in itunes and it just CRASHES. HELP PLEASE. is there a glitch with win 8???

    okay not sure how this works so here i go again.
    Okay i bought a dell pc with windows 8 (big mistake) i downloaded itunes and from my external hard drive, right clicked a movie file (in ipad format, because this worked in vista on my old laptop) and it will not go into itunes. And itunes keeps crashing. Is there a glitch with win 8 and itunes ? I never had this prob with vista. I would right click a file and say open with itunes and poof it goes in the library. Please help before i throw this thing out the window! OH newest itunes is what i have installed.

    Take a look at this MBP, a refurbished unit.  Don't let the late 2011 release date put you off.  For about  $500 less than an equivalent 'new' one with similar specifications you get a quad core CPU and excellent graphics.  As Steve359 mentioned, this can be upgraded if the need arises and has the same warranty as a 'new' one
    I would not be surprised that these may actually be 'new' MBPs due to the length of time that they have been replaced by the current generation.  I purchased a 17" model about 5 weeks ago, and a serial number check suggests that it is 9 weeks old.
    http://store.apple.com/us/product/G0NM5LL/A
    Ciao.

  • Hi, my 120gb ipod classic is not showing up in itunes, and everything is gone. how do i format it on microsoft ' format portable audio player ' ?

    hi, my 120gb ipod classic is not showing up in itunes, and everything is gone.
    how do i format it on microsoft ' format portable audio player ' ?
    the device has just installed necessary drivers to microsoft upon plugging in
    like a say though, not showing up in itunes still
    before it recently had this failure, it had shown up as corrupted and that it needed restoring (but i was holding off, as i manually managed all music and was hoping for a way to back it all up, to no avail)
    first time posting here, would appreciate a quick answer because tempted to just click the 'restore device defaults' option
    Many thanks

    same thing here

  • I formatted my iPhone 5 and now it won't activate. I've tried connecting it to iTunes, and I've tried restoring it with Itunes.

    I formatted my iPhone 5 and now it won't activate. I've tried connecting it to iTunes, and I've tried restoring it with Itunes.
    Im stuck on the wifi screen where you activate the phone. Please help

    same here, I was using an ios7 beta version for non developpers and I downgrated it but its stuck where I active it, hope we wont stay this way for too long

  • Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

    Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

  • I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

    I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

    Hey floridiansue,
    Do you have an installed email program such as Microsoft Outlook?  If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

    Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
    Everything is fine.
    -They are the right format
    -Quicktime is updated
    -I have tried simply dragging them into the 'movie' library
    -I have tried going to file<add file to library
    Nothing works, has anyone else had this problem and found a way around it?
    Any and all help appreciated.

    In addition to Mike's suggestions,  you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

  • Best File Format to use for iTunes and MAC

    I have always used the AAC Encoder set to 256 kbps to import my CDs to iTunes. In preparation for moving to a music server system in the future I want to re-import my CDs at the highest quality (uncompressed) format that I can.
    Is my understanding correct that AIFF was developed for use with MAC and basically WAV for Windows? Would it be best for me to use AIFF? Should the settings be left at automatic or set to 16 bit, 44 khz and stereo?
    I understand there is a way to take these uncompressed files and compress them later for transfer to my iPod. How is that done? If there are tutorials or other directions on this site or others please feel free to direct me to those. At this point I have not been able to find an answer to my specific questions.
    Any other recommendations or suggestions is appreciated.
    Thank You
    Mike

    Macs and iTunes will recognize and play both AIFF and WAV formats. If you want to play the files on Windows machines as well, I'd say use WAV encoding. In order to ensure the quality you want, change the setting from 'Automatic' to 16 Bit, 44.1khz stereo (this is industry standard).
    When you want to compress the high quality WAVs, change the import settings to the desired format (mp3/aac etc). Then select the tracks you wish to compress and in the 'Advanced' menu, chose 'Convert selection to mp3/aac'. iTunes will then create duplicate tracks encoded to the desired format.
    Hope this answers your question.

  • My videos played fine until my pc crashed  now i cant get them back in itunes they play in quicktime and the formats havent changed. they wont drag drop into i tunes or using add file.

    I run winxp my pc crashed had to reboot. my video files are saved on an external hard drive.  they have all played fine in itunes before. the formats are all correct. now i cant get them back into itunes neither drag and drop or add file to itunes works. i checked the files and when you click on them they still play in quicktime. anyone have this??

    Repair your QuickTime.
    Control Panel > Add n Remove Programs > highlight QuickTime, click CHANGE then REPAIR.

  • I am not able to format my ipod classic as it is showing in the widows 7 but not in the itunes and when i try to format it, i am not able to format it

    i am not able to format my ipod classic as it is showing in the widows 7 but not in the itunes and when i try to format it, i am not able to format it i am not able to foramt it..

    Hello Ephremekka
    Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Regards,
    -Norm G.

  • I made a new playlist on ituns and changed the format to MPS, but I still cannot get it moved to my SD in that format...help?

    I made a new playlist on ituns and changed the format to MPS, but I still cannot get it moved to my SD in that format...help?

    Ok, so you said you've already right clicked on each song and "created a MP3 version?"
    If so sort the library's music by "Date Added (if it is not there right click on the other sort bars and add the column "Date Added". The mp4 versions are the ones in the playlist. You will have to find the newly added mp3s by sorting by Date Added.  Hope this helps!

  • I format my laptop to win 7 pro 64 bit then i installed itunes and i want my old podcasts to be on the library. i have my old podcast in hard drive. what should i do to get it????

    i format my laptop to win 7 pro 64 bit then i installed itunes and i want my old podcasts to be on the library. i have my old podcast in hard drive. what should i do to get it????

    I assume the podcasts you have are the mp3 or other audio files rather than a podcast feed in iTues or another rss reader? You can simply drag the audio files into iTunes, though they will appear in the 'Music' list since iTunes has know way of knowing that they come from a podcast.
    You can change the 'Media Kind' in the get Info pane (menu File>Get Info>Options pane) to 'Podcast' but each file will appear as a podcast with no title, containing the single episode.

  • I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

    I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

    By converting the WMA files to AAC formatted files. 

  • I converted video to .mp4 format. I can see the video in itunes and it is not syncing. what to do?

    I converted the video to .mp4(MPEG-4) format. I can see the video in iTunes library but i can sync it to the iPod. It is showing that the video cannot be played in iPod. What to do to sync the video successfully??? Please help.........

    Highlight the video in iTunes and choose Advanced -> Create iPod or iPhone version and wait for it to finish converting. Then try and sync the newly converted version over to your iPod Classic.
    B-rock

Maybe you are looking for

  • Foreign currency transactions

    Dear All, Please advice on how I can be able to pay from a Bank setup as a USD bank to a supplier invoice in GDP in SAP B1 SP2 PL50. Currently this is what is done: - Go to outgoing payments and select the supplier whose currency is set up as GBP -Cl

  • Uploading flash, how much is too large?

    Hi, I am trying to create a web site suing adobe Dreamweaver and flash, for the first time. I am trying to upload a webpage that contains swf. When I check mu site I could only see a blank page with the webpage title at the top of the page. When I co

  • How do I get the download for Lion OS on my iMac if I don't have the App Store app?

    I stopped by the Apple Store and they told me that they can't sell me Lion OS in the store.  Since I have an older iMac with out the App store App, they said that I need to contact Apple Support.  But do I have to do that via phone or can I somehow e

  • Item Not Found in Finder

    I just noticed today (not after any particular change or update to the OS) a large question mark to the right of the spotlight search in the finder window.  Clicking on the question mark yields "The item can't be found" as a dialog. Any idea what thi

  • Showing text comment for every selection under dropdownbox

    We retrieve key, value data for a dropdown box from a BI query. Based on the selection under drop down box, we want to display a comment next to it. How can this be achieved in VC without making any further calls to BI? Thanks, MD Edited by: Maulin D