ITunes and Quicktime Error after automatice Apple update, need help!!!

So I currently have a new labtop with windows vista. I have been runining iTunes for the pass 3 months already no problems. The Apple automatic update has never caused any problems till now. Quicktime needed to be updated today, and I accecpted the update, prior to that iTunes and Quicktime was working properly. Once the quicktime update was complete, it restarted my computer like usual. Then when I tried to open iTunes this error came up:
"iTunes cannot run because it has detected a problem with your audio configuration"
Now I checked the audio configuration and nothing was changed or anything, that has not been touched at all, so I still think it had to do with the update. The next error was came up when I tried to open Quicktime and it read:
"Runtime Error!
Program C://ProgramFiles/QuickTime/QuickTimePlayer.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information"
So as long as I have been using Quicktime and iTunes I have never encountered this, I tried to re-install but the error kept coming up after it was installed. Please help me out!

try doing following the steps in these articles
http://docs.info.apple.com/article.html?artnum=31115
and
http://docs.info.apple.com/article.html?artnum=93976
hope this helps

Similar Messages

Itunes and Quicktime errors when installing

HELP! I tried installing the latest version of Itunes, but I keep receiving a variety of error messages. When I install the Itunes and Quicktime bundle, I get "Error Code: -3" and when I try to install the standalone Quicktime, I get a bunch of messages saying that a file cannot be found, then error message 1714, and then to consult the Windows Installer help (Msi.chm). I tried to manually remove the old Itunes and Quicktime, but it won't work. Any information on the topic would be greatly appreciated.

hi jmorta!
apologies for the slightly impersonal nature of this reply, but i've just started troubleshooting one of these off in another thread in my post immediately prior to this one ...
let's start you off with the techniques i'm starting anndruu off with over here:
http://discussions.apple.com/message.jspa?messageID=1789002#1789002
love, b

I've updated to newest itunes and Quicktime--is it safe to update my ipod?

Before I do something I will have trouble undoing, I was wondering if most people are having success with the newest versions of itunes and Quicktime. Everything seems to be running fine on my computer--movies play, etc.--but I don't want to update my ipod until I'm reasonably sure things will work fine there as well.
Also, I was wondering how exactly to purchase the new Quicktime key that Software Update says I'll need. I went to the Quicktime site but was a little confused--do I actually need to purchase Quicktime Pro? Can you download the key or do you have to wait for the software to arrive in the mail? (If movies are playing fine in itunes, does that mean I don't need a new key?) Again, I don't want to update my ipod only to find out that I've screwed things up.
By the way, I have the 30G video ipod.
Thanks to anyone who can help me with this.

I have updated mine (a brand new Nano and a 60 GB iPod Photo) with no trouble whatsoever. I had some minor glitches with the iTunes 7.0 update, but since the 7.0.2 update all's right with the world.
I would go ahead and update your iPod now.

ITunes and Quicktime Error Messages

Hello all,
I get the following error message when I try to open iTunes and Quicktime from my desktop:
"The feature you are trying to use is on a network resource that's unavailable."
When I tried to uninstall iTunes I got the following error message:
"This action is only valid for products that are currently installed."
When I went to the specific folder(s) that they are in, I was able to open iTunes and Quicktime without a problem.
Has anyone ever encountered an issue like this? I just started having problems with these programs.
Thank you all in advance for your help.

I figured out the problem. I had to use the Windows Installer Cleanup. I haven't had any other problems thus far.
Thanks again.

WEB and WIKI Error after Feb2012 server update

Anyone else having server WEB, Wiki and certificate problems after the last update?

I got this from the log file. Maybe it will help finding the problem.
Feb 27 00:19:54 xxvxx servermgrd[6491]: servermgr_web: XSWebConfig read failed; detail:Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass
          ." UserInfo=0x7fc533d6ad50 {NSLocalizedDescription=Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass

ITunes and Quicktime don't play videos properly! HELP!

While playing mp4 video's, my iTunes and Quicktime won't play mp4 properly! They play the sound, but the picture is al green with wierd writings on it..
I tried:
- re-installing iTunes and Quicktime to both earlier versions
- installing all possible codec's
And when I want to put it on my iPod it crashes everything..
Anyone know whats wrong? Or does anyone have the same problem?

Hello,
You can find additional information and troubleshooting steps from the following article: http://support.apple.com/kb/HT2729
The symptom you mention is addressed in one of the FAQ's on the page.
Have you tried one of the free videos from the iTunes Store? You can find free video and music content on the iTunes Store. The "Free on iTunes" section is generally towards the bottom of the center column of the window.
Charles

New ipod nano and error in updating itunes and quicktime (error 1905)

this is really annoying me, i have itunes 6.0 or 6.1 or something, and i recently purchased an ipod nano.it said the new nano was only compatable with itunes 7.1, so i went to apple.com and downloaded it. it took two hours to download the set-up for itunes 7.1. i ran the set-up, and then in the middle of it this error came up:
Error 1905.Module C:/ProgramFiles/Quicktime/GTUIPanelControl.dll failed to unregister. HRESULT -2147220472. Contact your support panel.
i pressed okay twice, and it went through the rest of the process and it says this:
Could not open key:
HKEYLOCALMACHINE/Software/Classes/QuickTime/CLSID. Verify that you have sufficient access to that key, or contact your support personel.
all of this is very frustrating, but after i click "ok", it reads this:
The installation of QuickTime did not complete successfully.iTunes requires QuickTime.
Please help!i would like to utilize this ipod sooner than later, obviously.
thank you

http://www.microsoft.com/downloads/details.aspx?FamilyId=0A8A18F6-249C-4A72-BFCF -FC6AF26DC390&displaylang=en
I used that download, which seems to have worked for some people, but not others. It has something to do with downloading a VBScript. Anyway, I did this, but when I tried to complete its download, it said "Error registering the OCX C:\WINDOWS\system32\vbscript.dll"
I then tried to run that file through Run, typing in "regsvr32 %SystemRoot%\system32\vbscript.dll"
I was told it would "reregister" it. Unfortunately, I was met with other error message. ""DllRegisterServer in c:\WINDOWS\system32\vbscript.dll failed. Return code was 0x80004005"
I was told that it had something to do with not having adminstrative privilegdes. I've dealt with these "adminstrative priviledges" before when Norton refused to work, and its no happy mess. But if someone can shed any light on the situation, that would be great.

ITunes and Quicktime error...

Hiya...
I've read all the threads and still can't find an answer to my problem, I hope someone can help me...
when i try to open iTunes the following message pops up:
"QuickTime failed to initialize (error -2093).
QuickTime is required to run iTunes. Please re-install iTunes. "
... so I re-install iTunes and everything is hunky-dorey until after I turn off my pc and come back to go into iTunes... then the message pops up again...
... I have gone into task Manager Processes and iTunes.exe is there when the message pops up, but in the applications tab, the note is there about QuickTime not being able to run...
any ideas?? I'm getting tired of having to re-install iTunes everyday!!
MESH Windows XP

try doing following the steps in these articles
http://docs.info.apple.com/article.html?artnum=31115
and
http://docs.info.apple.com/article.html?artnum=93976
hope this helps

IPad backup freezes my iTunes and won't allow New Software Update! HELP!

Okay... I am getting so frustrated. I am on a Windows 32bit XP and don't have any problems with my other iDevices.
I tried over and over, yet every time I connect my iPad it says that it is backing up and then just sits there until I finally get a "program not responding message." In addition, even if I "x" out of the backup part and allow it to finish the rest of the sync process, which it does fine, it isn't allowing me to update to the new version of the software.
When I click on the update software it verifies the iPad and then goes to backup the iPad and then same thing... it just sits and sits no bar, no nothing. If I hit the "x" it simply closes out of the process altogether.
What am I missing? Suggestions? Help?

oh wait... i guess it did update... nvm thank you though

TS3694 am updating my iphne and has error 1015...i need help

i need help

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Bootcamp partion lost after OS X update, Need help repair my disk.

Hi.
After updating to Yousimiti yesterday, i encountered som problems with my bootcamp partion.
I wasn't able to boot from the partion. I googled a lot, and found some posts, where the problem was resolved, and followed the following steps:
sudo fdisk -e /dev/disk0
p
setpid 4
07
flag 4
p
write
y
After this i was able to boot form my Drive, but it tells me: "Operating system missing".
Then i started investigating further i saw that my bootcamp partion now only is 60GB, where before it was 100GB.
When i first made my Bootcamp i made it 60GB which i fast found out was not enough for the programs i needed, so i used a program on windows to expand the patron, from empty space on the disk. Now i have 40GB blokced space, and the 60GB Bootcamp.
From what i have read the problem is that Windows and OS X does not use the same Data table format.
Is it possible to Rewrite the datable, os that OS X knows that the Windows part is 100GB and not only 60?
Underneath here i linked to some screenshots of the problem, Hope you guys can help me! (Sorry that it is danish, hope you see et anyways)
And there some info that i got from a "Partition inspector app":
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640    727569303 Unknown
3      727569304    728838847 Mac OS X Boot
4      859918336    977104895 Basic Data
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1       409639 ee EFI Protective
2         409640    727569303 ac Apple RAID
3      727569304    728838847 ab Mac OS X Boot
4 *    859918336    977104895 07 NTFS/HPFS
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: Unknown
Listed in GPT as partition 2, type Unknown
Listed in MBR as partition 2, type ac Apple RAID
Partition at LBA 727569304:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot
Partition at LBA 859918336:
Boot Code: None
File System: Unknown
Listed in GPT as partition 4, type Basic Data
Listed in MBR as partition 4, type 07 NTFS/HPFS, active
If u need more info please tell me!

The drive is dying, I doubt you can fix it, but...
10.6 has been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE.

Applications won't open after update to iTunes and QuickTime

I just allowed a software update for iTunes and QuickTime. After rebooting, I found that the Finder will not start, nor Mail nor most other applications. TextEdit will start, which gives me the Menu bar so I can switch users, but all users have the same problem.
I cannot see the hard drive icon without the Finder. If I hit the Finder button, it wiggles and then dies. Safari starts, but "quits unexpectedly" when I try to browse with it.
I bought the G5 with 10.2 installed, then upgraded to 10.3 I have the 10.3 upgrade disks, but don't know if I can use these to do an archive and re-install.
I can see the hard drive by doing an "open" from TextEdit, but of course I can't use that to open another application. I've booted of the 10.3 upgrade disk and used Disk Repair, but it found no problems. Lots of permissions problems, but I doubt that is causing the trouble.
I'm in a real fix here. Any suggestions?
Thanks,
Ray
G5 Mac OS X (10.3.9) )
G5 Mac OS X (10.3.9)

I'm having a similar problem only with disk utility after updating iTunes and Quicktime. I am unable to repair permissions, but otherwise the machine is working great as before. When I try to repair permissions using either Cocktail or Onyx it just keeps going, going, going and going but never finishes. It will run for several hours before I have to force quit the application. Repairing permissions has never taken more than 15 minutes prior to this update.
I decided to try using disk utility while booted to osx, I get a message that says communication between the disk managment tool and disk utility has been lost and operation cannot continue. The same error occurs when running disk utility off the startup cd. I restored using my backup then ran disk utility and all was okay using all of the methods mentioned above. I installed the updates again and the same problem occurs when trying to repair permissions.
Guess I will reload my backup and wait for a fix from apple unless someone chimes in with ideas on what could be wrong. Thank goodness for backups!!! This is the first software update that has given me any problems. Oh, one other thing. I installed the updates on my titanium powerbook running 10.3.9 and didn't have any problems. The setup on my tibook is essentially the same as my powermac G4. What gives? Anyone else having problems after installing the updates?

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

Exception processing message 0xc0000013 after updating itunes and Quicktime

After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
I'm using Windows Vista and this is driving me nuts.
Any help would be greatly appreciated.

I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
. It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

I am unable to install the newest update for itunes and quicktime because of a bonjour error about path not being located

I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
Thank You in advance!!!

The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

ITunes and Quicktime Error after automatice Apple update, need help!!!

Similar Messages

Maybe you are looking for