Itunes and usb showing on screen

Itune and usb showing on screen

I am getting the same thing on an old non jaiilbroken phone.
when I tunes starts it says found phone in recovery mode and must  restore.. 2/3 the way it give error unknown with number 29>
now the usb pointing to itunes is back.
there are tones of notes online and just wondering if anyone here has seen a fix... ?
Daveincave67

Similar Messages

  • Itunes and usb showing on screen cannot reset

    new phone was updating like itunes said now phone is locked with this screen and computer will not reconize it

    I am getting the same thing on an old non jaiilbroken phone.
    when I tunes starts it says found phone in recovery mode and must  restore.. 2/3 the way it give error unknown with number 29>
    now the usb pointing to itunes is back.
    there are tones of notes online and just wondering if anyone here has seen a fix... ?
    Daveincave67

  • My iPhone 3G  has a itune and USB logo on screen,does anyone know how can i reset.

    My iPhone 3G has a iTunes and USB logo stuck on screen,how do i reset iPhone .

    That is its way of telling you to connect it to your computer, and open iTunes (if it doesn't open automatically).

  • Iphone stuck with itunes and usb symbol, havent got disk help!!!

    i have my itunes uptodate but the iphone is stuck with the itunes and usb symbol on screen, i havent got the disk for the computer either :/

    daniellefromnottingham wrote:
    the disk for the iphone, and the iphone doesnt show up on itunes at all
    There is no "disk".  You have iTunes.
    Have you tried a different cable, a different USB port, rebooting the computer?

  • I cannot get out of a frozen state on my iPad. It is showing Itunes and usb connection images on screen

    PLease help me get my IPAD out of this frozen state. It is showing the Itunes and USB connection image. It will do absolutely nothing! HELP!!!

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Itunes icon and usb icon on screen ........

    The iTunes icon and usb cord icon shows on my screen to plug it into the computer. When I do so iTunes tells me I must first type in my password on my ipod so itunes can connect to my ipod. The problem being that the itunes and usb cord icons are on my screen and I am unable to get to the password to type it in...HELP PLEASE

    Your phone is in recovery mode; you will NEED to restore the device by connecting it to iTunes. If you ever synced  with iCloud then you may have contacts saved there, otherwise...unforunately your data will be lost

  • My ipad 2 just show itunes n usb logo at screen after update ios8.1.2.It just freeze there.but not happening to my ipad air n ipad mini!!!what to do?i dont wanna lose any data on it.

    My ipad 2 just show itunes n usb logo at screen after update ios8.1.2.It just freeze there.But it not happening to my ipad air n ipad mini!!!what to do?i dont wanna lose any data on it.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT201413 i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

    i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

    That screen is asking you to connect the device to iTunes to restore it.
    tt2

  • Try updating my ipad  2 ,came back with error 1602, and now my ipad is stuck with the itune and usb icon on the screen

    Try updating my ipad 2, pop up with error 1602 and now my ipad is stuck with the itune and USB icon on the screen. I tried to restart it, but screen still comes up the same.

    See if this page helps http://support.apple.com/kb/TS3694#error1602

  • HT4623 my iPhone 5 is frozen while I was updating with iTunes.  Can not use phone and is stuck on the iTunes and USB screen.  How do you fix it?

    I can not use the phone at all.  It is frozen on the iTunes and USB screen.  iTunes is not recognizing the phone as connected either. What do I need to do to fix it.

    Open iTunes on computer. Connect iPhone to computer with Lightning Cable. Hold both home and power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If there are any problems with this, you have 1 year Warranty with Apple. Make Genius reservation or set up service and take or send to Apple for resolution.

  • I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

    I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

    you may have to do these stepps a few times http://support.apple.com/kb/HT1808

  • Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

    Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

    Do as the image suggests, connect the device to a computer running iTunes.
    If it is still not working, try posting in your native language.

  • HT4623 i am seeing only itune and USB symbol in my iphone screen. How to fix it?

    i am seeing only itune and USB symbol in my iphone screen. How to fix it?
    I have connected my iphone to Computer....but i tune is not deteting the device it seems.
    Could some one help me here?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • Itunes and usb icon showing

    Ipod Touch updated and now shows the itunes and usb symbol. Doesnt show up in itunes. Also, it doesnt allow me to turn off. Resetting does nothing.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My Iphone 4 goes off after tried to instul ios 7.0. I 'm onlu seeing the sing of iTune and USB plug right on the phon's  screen. I really need help because I all i got

    My Iphone 4 shuted down after tried to instul ios 7.0. I 'm only seeing the sing of iTune and USB plug right on the phon's screen
    I really need help because that's only phone i got.

    Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
    The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
    They're seeing a lot of these and it looks like they already have a script.
    Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
    It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
    If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now.

Maybe you are looking for

  • Output type selection is missing for report  S_ALR_87013558

    Hi, In report S_ALR_87013558 output type selection is not seen in production. whereas it was there before, and its there in quality. Please help how should i bring it back. Points are awarded in full for correct answer. Thanks

  • Home wireless network in China using Airport Express ?

    I am going to be living in China with my Macbook. I will be bringing my Airport Express with me. I would like to know whether it is appropriate to connect up my Airport Express to a Chinese cable modem to obtain wireless internet access at home. Or i

  • Trying to access methods from a .class file by creating instance of class

    Hey all, I'm hoping you can help. I've been given a file "Input.class" with methods such as readInt(), readString(), etc. I have tried creating instances of this class to make use of it, but I receive the error "cannot find symbol : class Input". If

  • Mapping date field to a month field

    Hi gurus I am working on BI 7 and as per a requirement i need to map a date field present in a DSO to a calmonth(0CALMONTH) field in an infocube...so do i need to write a routine for  it..so that the month field can fetch data from a date field...

  • Quickly switching blending modes

    in windows, you can select a Blend mode (Overlay, Screen, etc) and using the mouse wheel, select new ones.  However on a Mac, you have to click and select one everytime.  Is there some secret to achieve a similar quick switch like on Windows PS?  tha