ITunes and Vista 64Bit! No work together!

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista. The installer for 64-bit Vista is named iTunes64Setup.exe instead of iTunesSetup.exe. For more information see http://docs.info.apple.com/article.html?artnum=301301"
So now you iPod With Coloer Displays will work!

I had Vista 64 and now Windows 7 64 and no issues--and there is a 64 bit version of iTunes too. All works well.

Similar Messages

Audible, iTunes and Vista 64bit

Hi everyone, I'm moving to a new computer tomorrow that has Vista 64bit on it. I know that iTunes is now compatible, but I have a lot of audiobooks from Audible and to listen to them I know I'll have to authorise my new computer. I've had a look through the help pages on audible's site and it says that there is a problem with iTunes that stops you from authorising your computer on a 64 bit vista machine: http://audible-uk.custhelp.com/app/answers/detail/aid/3666/kw/vista%2064/rid/166
The thing is, some of the info on audible's website can be quite old so I'm not sure if this problem has been addressed yet or not. Has anyone managed to authorise a 64bit vista system for audible content? If not, can anyone think of any work arounds? (other than keeping the old computer around until the problem is fixed!)
Cheers
Nicola

I had Vista 64 and now Windows 7 64 and no issues--and there is a 64 bit version of iTunes too. All works well.

Remot Control For Digital@nywhere ATSC and Vista Don't Work Together Very Well

I have a Digital@nywhere ATSC tuner card w/remote.
On Windows XP, the remote worked ok. On Windows Vista, the remote works only some of the time.
On Windos XP, the BDA drivers and utilities on the install disk loaded fine. Not so with Vista.
On Vista, the utilities on the install disk seem to load fine, but the BDA drivers fail.
Loading the Vista Digital@nywhere utilities gets the tuner card to work, but has no drivers for the remote. Leaving me to load the utilities from the install disk, and and the BDA drivers from the Vista Digital@nywhere files. A rather tedious process, with the remote only functioning sometimes.
I have tried every trick I can think of to get the remote control and Vista to work together, to no avail. I'm stumped.
I'd rather not go out and buy a new tuner card, when the Digital@nywhere ATSC tuner card works fine on Vista. I'd just like to have a remote control that works fine too. But I don't.
I hope an answer can be found for this problem.
If I haven't been clear enough, just ask, and I'll try to explain things better.
Thanks for any help that anyone can give.

Are you using Media Center in Vista? If so, buy a Media Center remote, should work with no problems.

ITunes and Vista 64Bit!

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista. The installer for 64-bit Vista is named iTunes64Setup.exe instead of iTunesSetup.exe. For more information see http://docs.info.apple.com/article.html?artnum=301301"
So now you iPod Classics will work! No more returning them to Apple!

I had Vista 64 and now Windows 7 64 and no issues--and there is a 64 bit version of iTunes too. All works well.

My itunes and iphone are not working together. all my software is up to date. what i can do? i need to manage my phone!!

I'm getting extremely frustrated with my iphone and mac.
i have the iphone 4, and the mac is leopard.
I plugged my phone it to manage my music, and a message popped up saying i needed software 10.6.8 or higher.
so i downloaded the 10.7. it's still not working!
i have very little space left on my phone and i need to manage everything.
what do i do??
someone please help!!!!

We need clarification here.
Please don't just state version numbers, also state which software. iTunes 10.7 requires OSX 10.6.8 or higher. Leopard is OSX 10.5.8. You have two alternatives right now. One is to stay with Leopard for a while (ultimately you should upgrade) and install iTunes 10.6.3 which is the last version to work with Leopard. This should work with iOS6 on an iPhone4. The other is to call Apple and order OSX 10.6 (Snow Leopard) and upgrade the computer to 10.6.8 which will allow you to run iTunes 10.7. The caveat is we know nothing about which computer you run and if it even can run any system higher than Leopard.
Here is iTunes 10.6.3
iTunes 10.6.3 - http://support.apple.com/kb/DL1575
If you want to try upgrading:
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About this Mac" and "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present). If it says something about Intel or Core Duo or Core 2 Duo in the processor you can upgrade to Snow Leopard (assuming you have sufficient RAM/"memory"). If it says PPC or PowerMac, you cannot.
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store.
It would help when posting issues here if you would state exact error messages you see. "It's still not working!" while a description of the situation does not speed us to a diagnosis of the underlying issue.

How do I make WinIdows 8, New Itunes, and Nano 5th gen work together

iI am downloading library books, WMA to Overdrive, then transferring to iTunes/iPod Nano 5th gen.     Problem came when I got a new laptop w/ Windows 8 and installed the Overdrive & iTunes.     Overdrive now tries to transfer directly to my Apple Device ( the Nano 5th) and totally ignores Tunes.   If I look at
Windows Explorer, the book shows on the Nano BUT when I try to see it on my Nano, it's not there.   Not in Albums, or in Audiobooks.   I'm ready to
scream.    Any ideas?

Hi there,
I would recommend taking a look at the article below. It goes over how to manually manage your content using iTunes 11.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Hope that helps,
Griff W.

So i just got a new mac, and i am trying to sync my songs that i bought on itunes, and some of the worked, but a huge selection of them have a little exclamation mark beside it and it says it can't be downloaded, why?

so i just got a new mac, and i am trying to sync my songs that i bought on itunes, and some of the worked, but a huge selection of them have a little exclamation mark beside it and it says it can't be downloaded, why?

Hello Pork Chop 2,
Congratulations on your new Mac! It sounds like your purchased songs are not playing completely after you downloaded them. I recommend to following steps for an issue like this:
Symptoms
Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
Resolution
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
Delete the purchased song that is exhibiting the problem from your iTunes library.
Click on the Purchased link in the iTunes Store to view your previously purchased music.
Download your previously purchased song from this list.
You can find the full article here:
Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT4437 Can't get iTunes and monitor mirroring to work at the same time.

When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
Ak

You might try a simple headphone splitter like this:
http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I tried to update the latest update 1/27/14 and it ran into a problem. I am not able to get to my library. I tried to download Itunes and it won't work . What should I do?

I tried to update the latest update 1/27/14 and it ran into a problem. I am not able to get to my library. I tried to download Itunes and it won't work . What should I do?

Are you sure it was error 0604 since I never heard of that error, it does not appear in the list of errors in the following and a search of Apple's support site gets no hits. However, error 1604 is list and users have reported that error number. If 1604 is the error number the following tell yu wnat to do when you click on that error number:
iOS: Resolving update and restore alert messages

I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?

I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?

Did you try to connect in recovery mode, explained in this article?
iOS: Recovery mode

Does 2 firewire audio and video interface can work together on FCP ?

hello,
My audio interface is a TC Electronic Konnekt 24D
my video interface is a Canopus ADVC 110
my hard drives are plugged in firewire too
and I use Final Cut Pro 5.0.4
So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
I want to use the voice over tool with the konnekt 24D, so what should I do ?
Does 2 firewire audio and video interface can work together ?
If so, maybe I only have a driver problem from TC Electronic.
But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
thanks
eMac G4 1,25 Ghz Mac OS X (10.3.9)
eMac G4 1,25 Ghz 1 Go RAM DDR Mac OS X (10.3.9)

The 1082 does show up as a possible input when I open
the VO tool.
Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
I use my Aja box for export & external monitoring.
All my audio sources run back into the Tascam and I
use the analog mixer in the 1082 to monitor different
sources.
When I view external video, the audio follows it to
keep sync.
that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

ITunes and Quicktime don't work on Windows 7 64-bit

iTunes and Quicktime don't work on Windows 7 64-bit. I tried to uninstall and install the package according to Apple support article (http://support.apple.com/kb/HT1923) but still the same problem. I even tried to stop the Bonjour, it didn't help either. When I try to run either iTunes or Quicktime I get a Windows error message "iTunes has stopped working", with details like this:
Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          10.3.1.55
Application Timestamp:          4deec351
Fault Module Name:          StackHash_0a9e
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          00000000
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Any suggestions?
Thanks.
Sergio

Taken as a whole, the symptoms suggest that another application (other than QuickTime itself) has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

I recently downloaded the iTunes 11.0.5 for Mac OS X and the iTunes store comes up as a blank page. I have already tried re-downloading iTunes and that didn't work... How can I get it to work?

I recently downloaded the iTunes 11.0.5 for Mac OS X and the iTunes store comes up as a blank page. I have already tried re-downloading iTunes and that didn't work... How can I get it to work?

I was able to fix mine. I went to software update and updated a few things. I did not update everything, but only what I thought were the essentials, which I believe was Safari, a security update, and a firmware update.
Then I deleted and reinstalled Itunes yet another time. Now the itunes store is back up again.

TS1538 Followed troubleshooting for iPhone not found in devices iTunes and that did not work... Now what?

Followed troubleshooting for "iPhone not found in devices" iTunes and that did not work... Now what?

That's what I tried. The 6 steps and I do not have security software on my phone. iTunes on my Mac is still giving me the warning that I need to download the latest version on my phone, and is not recognizing it in devices, which is the irony because that's what I need to actually update it

ITunes and Vista 64Bit! No work together!

Similar Messages

Maybe you are looking for