ITunes and Windows 7 64 bit doesn't work together?

Running Windows 7 64 bit, iTunes is reporting it is latest and greatest, as is iPod touch. When I tried to move some songs I purchased today to my iPod via iTunes, my system crashed. Tried a few times and it kept crashing. It would transfer 1 maybe 2 songs then crash. I've not installed anything new, nor have I had this problem in the past and the crashes only occur when transferring music. Anyway, after the last crash I was checking my version on iPod touch and noticed it says I have only 2 gig left on space. Yet when I go to my Music I only have 3 songs. In addition, when I plug my ipod into my computer, iTunes sees all my old music from the iPod (listed under devices) AND it will play those songs. From my iPod those songs do not seem to exist but are still taking up space. I am in the process of restoring my iPod but I am curious if anybody has had the same issue, if so what was your resolution... as well as any suggestions. After restoring my iPod I had more issues. I installed iTunes to my XP machine, authorized it and hooked up my iPod and everything is syncing fine now. Seems to be just a problem with my Windows 7 machine. Any word as to when this is going to be fixed? My XP machine is not my preferred machine to keep my music on as it is my work PC.

I'm having a similar problem - my computer tells me that "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it". I'm also using Windows 7 64bit.

Similar Messages

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

Outlook 2010 - 64 bit, Windows 7 64 bit, doesn't work ?

I am using Photoshop Element 8 with Windows 7 English Versuin 64 bit, I installed in the past Office 2007 32 bit and Office 2010 32 bit, with office 2007 32 bit every thing works well, I am talking about sending email through Outlook, I don't remembre if I tried to send emails with Outlook 2010 32 bit, but at the moment I am workin with Office 2010 64 bit and I choose in the E-Mail Settings - the E-Mail Client the Microsoft Outlook, The Microsoft OUtlook is my default email client, but !!! when I try to send pictures from the Photoshop Elements I get an error that I have to choose the Outlook as the DEFAULT EMAIL CLIENT. so I am using now the Adobe E-Mail Service.
Is this a BUG ? Can I fix this problem ?
Please your HELP.
Have a Good day and congratulationsto Uruguay !
Eli

Hello
Thank you for your help
This is exactly what I did but it doesn't work.
Best regards
Eli
[email protected]
Date: Tue, 6 Jul 2010 22:15:07 -0600
From: [email protected]
To: [email protected]
Subject: Outlook 2010 - 64 bit, Windows 7 64 bit, doesn't work ?
Hi Eli,
Can you try setting the outlook as Default email client. Here are the steps to achieve this -
Start Internet Explorer.
Select Tools | Internet Options from the menu.
Go to the Programs tab.
Make sure Microsoft Office Outlook or Microsoft Outlook is selected under E-mail.
Click OK.
Now please see if you face any issue using Outlook in PSE.
Thanks,
Sourabh
>

ITunes With Windows 7 64 Bit Doesn't Access Ipad Since Last Update

I'm assuming Apple has figured this out by now - but at least on my pc - to plug in my Ipad and make it work I have to stop the apple mobile device service (itunes is locked up otherwise) and then go to devices and reinstall the apple usb driver from C:\program files\common files\apple - which is pretty strange since the rest of the itunes software is in the program(x386) directory... I'm guessing someone had a blonde moment and installed part of the program to the wrong directory - but once I do that (and I had to do it again just now after the Ipad update) it works just fine. Just wanted to know if anyone else had the issue or if it was just me...

I'm having a similar problem - my computer tells me that "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it". I'm also using Windows 7 64bit.

Webi Rich Client on Windows 7 64 bit doesn't work

Hello,
on my server WINDOWS 2008 r2 64 BIT i have upgraded BO Edge XI 3.1 to SP3.
On a Windows 7 64 bit client i have installed Webi Rich Client from Infoview and the latest Java version.
I have 2 problems on this client:
1) From Infoview, When i try to modify a .wid file, Java control panel doesn't found a plug.in and stop to run.
Wich is the supported Java version?
2) Webi Rich Client, after login, doesn't open a .wid file and give me the error WIJ 2002.
Can anyone help me???
Thank's a lot
Daniela

Hi all,
thanks for your suggestions.
Unfortunately both errors still remain.
1) Web Intelligence Rich Client
I have installed BOE client tools using XI3.1 SP3 Client tools package in C:\Business Objects. The report's import runs well, but when i try to open one of the imported reports, i receive the error: WIJ 2002.
The details are:
Version:null Analisi dello stack: java.lang.RuntimeException: java.lang.RuntimeException: XML parser problem: XMLJaxpParser.parse(): Element type "ABOUT_Patentnumbers" must be followed by either attribute specifications, ">" or "/>". at com.businessobjects.wp.xml.jaxp.XMLJaxpParser.parse(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source)
2) Infoview
We have installed java 1.6.0_02 (we previously have Update 29).
We try to use Explorer 9.0.3 or Firefox 8.0
Any other suggestion???
Thanks

ITunes for windows 7 64 bit will not work at all

Hi, I have a big problem with iTunes thats killing me.
So i updated my iphone 4 to IOS 5 and my last version of itunes which was 9. something i forgot... anyways when i had ios 5 i couldnt sync with the itunes cause it was too low version for the ios 5. So i have no music right now on the iphone + all that stuff.
So i updated my itunes to 10.5.1, the install didnt work or something so i did manual install and it worked but when i try to enter itunes it runs it as a process in task manager which i cant close that process, but iTunes wont open even though the proccess is in the task manager.
I tried reinstalling itunes and it didnt work, so i updated all my apple software including itunes to their latest version cause i thought it would help but it didnt.
How may i get iTunes 10.5.1 to work correctly so i can sync my iphone?? please help me
Thank you alot,
-Guy

now nothing happens when I connect the iPod by USB - it's not even charging.
Do you have a laptop, Nin?
If so, the following document might be of some assistance with that:
[iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
(That issue seems to match your recognition and charging symptoms.)

Installing 8.1 or 10 onto a PC running Windows 10 /64 bit Doesn't Work. Installation Won't Finish

During the Installation of the HP Officejet 5610 AIO using HP 8.1 or Windows 10 printer software for a PC running on Windows 10 (64 bit) - Please click the link below to see the software that needs your immedaite attention. Please fix your software. I need the printer. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4192&lc=en&cc=us&dlc=en&sw_lang=&product=441125 I tried installing HP print 8.1 & 10 software for a PC running Windows 10 - I tried them both, but either software failed to install. It doesn't complete.During installation;System check completes,System preparation completes,Software installation completes but the Configuring product loops on & on without end. The configuring product status shows the arrow pointing to Configuring product active status...with the animated status bar moving from left to right but nothing happens until a fatal error pop up message interrupts the process & stops the installation. HP please fix your software, I need my printer.

I'm having the same issue!

ITunes and easycd creator 5.0 don't work together

I have an older home built system and have always used easy cd creator 5.0 to burn mp3 cds. after installing iTunes on my system cd creator could no longer find my cd buner so the only way i could fix the problem was to remove iTunes and reinstall easy cd has this happened to anyone but me
p.s
I don't have the cash to upgrade my system. so buying a newer version of easy cd is not an option. the newest version of easy cd needs a much faster system than my old 1.3mhz its not worth paying 80 bucks to get it so iguess im out of luck oh well.

yes, the early versions of Easy CD Creator are pretty notorious for the sorts of Device Filter conflicts that can produce those symptoms. for example, see:
Cannot Access CD-ROM and "Code 31" Error Message in Device Manager After You Remove Adaptec Easy CD Creator from Your Computer
(MS) CD-ROM access is missing and messages cite error Code 31, Code 32, Code 19, Code 39, or Code 41 after you remove Easy CD Creator in Windows XP
... how early is your 5.0.x? if you have an early enough version, you can start running into BSOD problems on an XP box. see:
Easy CD Creator 5.0 Does Not Function In Windows XP

ITunes and Windows 7 64 Bit

Each time I start iTunes, I get the following message "iTunes was not properly installed.If you wish to import or burn CDs, you need to reinstall iTunes."
I have re-installed iTunes twice and I still get this message - it is driving me bonkers!

... One possibility crystalising in my head. I haven't actually seen it happen before (that I knew about), but given that there was a GEAR entry in your Add/Remove programs, it seems plausible.
Can you check something for me? Do you still have that standalone GEAR installer on hand? If so, does it still give you that "later version is already installed" message?
(Here's what I'm wondering ... the GEAR driver associated with iTunes is normally installed via a DifX mechanism. That normally doesn't put a GEAR entry in Add/Remove programs or Uninstall a program. So that entry in Uninstall a program suggests that a version of the drivers has been installed via a Windows Installer mechanism. In that case, there's a .msi of some description for the GEAR drivers, and one symptom of a damaged .msi is "later version" error messages.)

ITunes and Windows XP 64 bit edition

I have iTunes v 6.0.4.2 running on my machine. I tried to install the latest version and am told it won't install on the 64 bit edition of XP. Why and what do I need to do to make it work?
Gentech Windows XP Pro OS is the 64 bit Windows XP

Sorry for lashing out, I know typed messages can easily be mis-interpreted. It seemed to me as though the response was intended to be like, "Hey stupid ...". And I get rather frustrated when people do that.
I have the PowerMac Dual Processor G5 1000mhz FSB. I know that the iPod and iTunes are linked as software and hardware, but I was not aware that I could install the iTunes application from the website to my iPod. Do we know if it is planned for iTunes to work with the XP 64-bit platform? If not, is there anyway I can assist with the project to make it happen... I am part of the Apple Developer Connection.

ITunes and Windows Vista 32 bit version install issues...need help

Trying to install iTunes version 7.6 and it is not working all my research keeps mentioning 7.2. Is there any reason why 7.6 won't work?

Trying to install iTunes version 7.6 and it is not working all my research keeps mentioning 7.2
Can you describe for us the problem you're experiencing? Include the text of any error messages if you're getting any.

My iPod touch says Disabled: Connect to iTunes, and everytime I try it doesn't work. How do I fix this?

I changed my password, and without knowing it, I typed the wrong numbers, and now I don't know my password. I've tried to connect to iTunes, but it doesn't seem to work. It only brings up the USB cable needs to be connected to iTunes on my iPod screen. Does anyone know how to fix this, because it's frustrating.
Thanks!!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Audigy 4 and windows 7 x64 ever going to work together?

?for 2 weeks i've tried every combo of drivers. and bios updates for my mainboard.
Can i get my once so reliable audigy 4 card to work on windows 7 ? No.
my mainboard is asus p5kpl-am. disbaled on board sound and no joy.
I had trouble even in windows 7 finding the audigy card before i had to do a full REinstall to my annoyance!! of course It found it then. But it never worked with the latest drivers. get no sound out put and worse it crashed my system and wouldnt repair. so had to revert back to onbaord sound and reinstall again.
the card is fine i know this as i have chekd in otehr systems on XP. but is anyone else having similar probs with a similar system as me?
And yes I have 4gb Ram, why should this make a difference. and i have tried it with 2gb. No joy!!
Please help creative and shed any light on this issue . If i RMA my card will gjust get a new or refurbished Audigy4?
cheers guys and sorry for any grammer lapses,

install the support pack and now the sound? works strangely apart from GAMES. they chop and distort!!
no end to madness !!!! im gonna have to try all these support packs or is they any way to stop the distortion?

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.
"An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'". This is all followed by some more text and code HRESULT:0x80070005
Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
Anne Marie

Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

ITunes and Windows 7 64 bit doesn't work together?

Similar Messages

Maybe you are looking for