ITunes and Windows 8

Using it on a tablet that had Win 7 (and it ran fine). Switched to Windows 8 when RTM came out (tablet certified for Windows 8). When I rented a couple of movies after about 10 minutes of watching the movie would play horribly slow and the sound would cut out. Restarting iTunes fixes it for about another 10 minutes.
Any word on iTunes and Windows 8? Apple has had enought time to test (with the dev and consumer previews being out for several months and RTM was at least a month ago) and deploy a version ready for Windows 8 at launch date.....

revo1059 wrote:
Any word on iTunes and Windows 8? Apple has had enought time to test (with the dev and consumer previews being out for several months and RTM was at least a month ago) and deploy a version ready for Windows 8 at launch date.....
No one here would have any way of knowing as we're users like yourself.

Similar Messages

  • Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.  ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

  • TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

    When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

    Hi inharmony35,
    If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Apple Support: Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    - Brenden

  • Is there a fix for the incompatibility between itunes and Windows Vista?

    I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

    Hey Don,
    What exactly happens after you install iTunes? Do you see an error message?
    This article describes device filter issues that can be caused by application conflicts:
    http://docs.info.apple.com/article.html?artnum=305422
    Jason

  • My Ipod 7th gen is not being recognized by itunes and Windows 8.1.

    Hello. My ipod 7th gen is not being recognized by itunes and Windows 8.1. When I connect my ipod to my computer, itunes will open automatically and a message bar below will appear:
    I have followed all the instruction in the support and itunes still unable to deted my ipod. The funny thing is, if i uninstall itunes, Windows 8.1. will detect my ipod but when itunes is installed, both itunes and windows 8.1. cannot detect my ipod. Thank you in advance for all your help.

    the message box says like this:
    An ipod has been detected but could not be identified properly. Please disconnect and reconnect ipod, then try again. If the problem persists, unisntall itunes then install itunes again.

  • Problem with syncing iPod ... Itunes and windows show errors... itunes 7...

    hey guys... since I upgraded to itunes7 my ipod (4th gen click wheel) doesnt sync poperly! it all began when I was syncing the ipod and my screen just froze a few secs after connecing the ipod! I had to restart the computer and reset my ipod... from that time had alot of trouble!
    first the screen froze immediately when I connected my ipod with the pc and later when i had formatted it with windows several times and resetted it a million times with itunes7, itunes and windows show errors (error (-124) while syncing and everything stops! I've just spent nearly two nights on that and really hope that my ipod didn't break just because of itunes7! to stay in proper english and not get that angry in letters that I am in mind--- please so help me... my ipod is everything and im a music junkey! by the way... itunes itself works perfectly... if i not sync! how peculiar that getting back to itunes6 is impossible...i tried it... does it hav a spec reason, hah!
    IBM, Pentium3 (666MHZ), FW(desire to fire), Ipod Click Wheel   Windows XP   30cm

    I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
    I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
    Thx for the help!
    Christopher
    IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

  • My windows 7 computer will not detect my ipod since updating both itunes and windows.  I've tried downloading them again and testing the ipod on a different computer which does detect it.

    My Windows 7 laptop won't detect my iPod since the last update of iTunes and Windows.  I've tried downloading them again. The apple device manager has an error message.

    http://support.apple.com/kb/ts1538

  • How can I resolve conflict between itunes and Windows 8.1

    When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer.  It is fine on other devices such as ipad and Windows phone.  I can also pick up emails on online on the same laptop.  There appears to be a conflict between itunes and Windows 8.1

    Please see  Boot Camp for comments.

  • Computer says iPod is there, but iTunes and Windows won't recognize it

    I've had a 60GB ipod photo for about 4 years and it has served me well. This morning the iPod froze in the middle of a song. I hit reset, and it came back blank - all the files were gone. When I got to work and hooked it up to my computer, iTunes and Windows can't recognize it, but I can find it in device manager - which means I couldn't do restore.
    I hit reset a few more times, changed USB ports and, somewhat miraculously, the iPod came back, complete with all files. On the way home from work it happened again and I haven't been so lucky.
    I forced it into disk mode and iTunes recognized it, but told me it was corrupt. I also received a computer sound card error - my sound card was busy, and an error stating that audio/video playback could be limited. I tried restore, but I received the unknown error. I'm using the latest version of iTunes and I'm all out of ideas.
    Any suggestions or should I put this iPod to rest and save up to buy a new one?
    Thanks

    The most likely problem is that the hard drive in the iPod is becoming unreliable. It may be experiencing sticktion, which is friction that makes the spinning platter stick and the motor cannot get it spinning. The iPod is regularly spinning the hard drive up, to cache songs into memory, and then spinning it down, to save power. If the drive was not able to spin up when commanded (in the middle of a song), the iPod would seem to lock up. Later, bumping the iPod may make the hard drive spin again, so it seems to work again, at least for a while.
    If this the the problem, the only way to fix it would be to replace the hard drive inside.
    You might try reformatting the iPod using Windows, if you can get it to appear in a My Computer or Windows Explorer window. Use a full format instead of a quick format. If that process competes successfully, run iTunes and try using Restore again to install and initialize the iPod's software.
    If formatting does not compete successfully, it may be time for that new iPod.
    You can do some experimenting on the old iPod, if you're into such things. I have successfully installed a compact flash card (through an adapter), inside a 4th gen iPod as a replacement for the hard drive. It is only 4GB at the moment, but CF cards up to 16GB are getting relatively cheap, so I might get one of those and start using by old broken 4G iPod again, +now with shock-resistant energy-saving flash-based storage+.

  • I try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?

    i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
    please what i do

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • Ipod not appearing on itunes and windows

    ipod not appearing on itunes and windows i have tried reinstalling itunes and nothing works

    Hello there. Maybe this support article will assist you.
    http://support.apple.com/kb/ts1538
    Cheers

  • My iphone 4s doesnt want to get recognized in itunes and windows 7

    my iphone 4s doesnt want to get recognized in itunes and windows 7 and idk what to do

    can u please help if u know what to do

  • Ipod freezes itunes and windows explorer

    I have been trying to connect a new 30G Ipod to my Vista computer and everytime I do both Itunes and Windows Explorer freeze. Neither recognize my ipod. I tried to change the drive designation but couldn't because of Explorer freezing. I did run the same Ipod on my XP and everything worked fine so it is a problem with my Vista computer or with the ITunes (7.2.035) software. Any ideas?

    Disconnect the printer, use a rear port on your computer and try it again.

  • Downloaded latest Itunes and Windows Update and everything fell apart

    Okay, I dl'd the latest Itunes and Windows Update today and turned off my computer. When I came back and turned it on, it became really slow and the style for all the "windows headings" turned "gray classic theme." I tried running Itunes and a box comes up saying that I "Do not have access to change the Catalyst Control," my ATI driver I think (x1300). Then it says that I can't run Itunes because the audio is configured wrong. I go to my Audio settings in the "control panel" and everything is grayed out except the hardware choices. I clicked on their properties (SigmaTel Audio), but nothing would come up for 45 minutes. I am barely running in VGA mode and cannot access the internet connections in IE, thus barring me from Microsoft's updates. Sorry if it's hard to understand, but I'm ****** because I can't listen to all the new stuff I bought on Itunes yesterday Does anyone have any clues or ideas?

    Take a look at this link, http://support.apple.com/kb/TS1369

  • Ipod is not recognized by itune and windows

    Well,today i recieve a refurbished 60G Ipod.I installed the program on the CD(itune+ipod for windows) and I connected my ipod to my laptop(windows) but,my laptop did'not recognize it.I opened Itune and it was the same. I tried every article i can find to solve my problem no one work. I have every program i have to install for my ipod,i have 2.0 USB,Windows XP and every system requirement!Does anybody have an idea?

    hi yes i had the same problem with my 60gb video but the thing was that my ipod would not be recoized by my computer or any other computer i tried waht you said and nothing works it only charges when it is plugged into a outlet but it has to charge for a full day and even when it does it barly goes to green then it turns to red barley last an hour..therefore it is not recoized by my computer or any computer tried what you said did not work and it takes a whole day in the outlet and only plays for an hour i need help bad if you could find out how to help me please and thank you

Maybe you are looking for

  • Attached image is null

    <?xml version="1.0" encoding="UTF-8"?> <definitions xmlns="http://schemas.xmlsoap.org/wsdl/"      xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"      xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"      xmlns:soapbind="http://schemas.xmlsoap.o

  • Unable to run JavaScript via Console in Acro Pro 8.2.2 - security issue?

    I'm unable to run a JavaScript either from the Console or via AppleScript's do script. At first I thought it was a keyboard issue as I'm using a MacBook Pro, but fn-Return for Enter works in Acrobat 7.1.0 Console. Trying to run a JavaScript from Appl

  • Alarm tone on a calendar task

    I've set a task on my Pearl calendar and it automatically assigns an alarm to it.  How does one alter the tone that this alarm uses?  I can't do it while setting up the calendar event, nor do any of my 'profiled' tones match the one that the  calenda

  • Outline

    Hi, I have two databases DB1 & DB2 which are exactly same in all aspects. One query is running slow in DB2. I'm thinking of creating an outline from DB1 and plugging into DB2, but it has many bind variables. Can i create outline for a query that has

  • TAF 11gr2 RAC

    Hi Gurus, Suppose if i create a service with srvctl add service and enabled it as TAF ,and use it to connect to 11gr2 RAC database from JDBC thin client.the instance to which connection got established got failed or crashed and the session will failo