Itunes - another "not closing" issue
So, is there a fix yet for this? (force quit does "work", if that is the right verb). I've read 2 threads, with guess-answers pointing to "widgets" or plug-ins being a potential source. This old Mac has neither of those installed, and I just had the same problem recur (which happens more often than not). So any conjectures when/if Apple puts a little of its massive power to fixing this problem? (iTunes is after all, a key component to Apple's recovery.) Is it only on PPC platforms? WMP, frankly, old as it is, works more reliably on my Mac. Thank you.
Macintosh Requirements -
* Mac OS X 10.3.9 or later or Mac OS X 10.4.7 or later required for iTunes
* Mac OS X 10.4.10 or later required for iPhone
* *500MHz G3 processor or better*
via: http://www.apple.com/itunes/download/
It doesn't really state g4 requirements so much, but I assume it means 500+ for a g3 or g4.
Similar Messages
-
when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success. Also, the bluetooth function stopped working.
Hi, EJ13.
I see you are having issues with backing up you iPhone and have tried a couple troubleshooting steps. There are a couple more steps I could recommend in the article below.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Regards,
Jason H. -
when connect my ipad a my rmbp 15" appears this message "iTunes could not connect to this iPhone. This device is no longer connected." and ipad is connected and disconnected all the time. but when connect the Ipad in my rmbp 13" not have a problem.
Please I need help. i hope not to have another disappointment with apple product.iTunes could not connect to this iPhone. This device is no longer connected.
iPad 2 7.1.2
iTunes 11.3 (54)
iMac 27 in 10.9.4
Follow these steps to resolve your issue for iPads
Troubleshooting time is about 30 minutes - 1 hour
Step 1
Unplug the usb 2.0 cord from the 27 in iMac and iPad 2 64 GB (or what ever version you have) Power down the iPad
Step 2
Select your HD (Hard Drive) ( I did this form my desk top)
Next select the applications folder, Next right click the iTunes icon and select show package contents, select Contents.
1. Next select info.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
2. Next select pkginfo, right click and select move to trash. (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
3. Next Select version.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
4. Remove "iTunes" from your dock
5. From the Finder, choose Go > Go to folder.
6. Type the following and then press Return: /var/db/lockdown
7. Choose View > as Icons.
8. The Finder window should display one or more files with long alphanumeric file names.
9. In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted. Note: Do not delete the Lockdown folder itself.
Delete only the files contained inside the Lockdown folder.
Step 3
Follow the below steps to troubleshoot the issue.
1. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
2. Click Go.
3. Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.) If you DO NOT HAVE file "com.apple.usbmuxd.plist~orig" I DELETED THE FOLLOWING (com.apple.usb.plist)
4. In the Finder, locate iTunes in the Applications folder and drag it to the Trash. (This will not remove any of your iTunes media or your iTunes library.) You may be presented with the following message “iTunes” can’t be modified or deleted because it’s required by OS X.) Do not worry click ok and proceed troubleshooting
5. Choose Go > Go to Folder. Enter the following location into the text field that appears: /System/Library/Extensions
6. Click Go.
7. Locate the file "AppleMobileDevice.kext" and drag it to the Trash.
8. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/PrivateFrameworks
9. Click Go.
10. Locate the folder "MobileDevice.framework" and drag it to the Trash.
11. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
12. Click Go.
Step 4
Goto your hard drive in the finder
1. Goto Library
2. Goto Launch Daemons
3. Throw this in the trash: com.ghughes.wifisync.root.plist and anything with the words iTunes
4. Goto Library
5. Goto Application Support
6. Throw this in the trash: Wi-Fi Sync (it's an entire folder) and anything with iTunes
Step 5
(Before restart book mark the link command and D). Restart the Mac.
Download iTunes and reinstall it. After the install, connect the 2.0 usb device to the iPad 2 while the unit is still powered off, next connect the 2.0 usb cord to iTunes, power the iPad on. iTunes will read the device and ask to trust device, select continue. Backup the iPad device to the 27 in iMac.
Step 6
Please Rate if it helped you! After that have a cold hard drink and enjoy the day -
Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!hi Limnos,
I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th. (90% of the media is missing, along with all playlists) The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29. (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
I have my iTunes folder backed up on both an external drive as well as Time Machine.
I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up.
Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
Thank you for your help!
Deb -
The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.
Others have commented on this too. It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development. You can send feedback to Apple but realize you may be perceived as standing in the path of progress.
http://www.apple.com/feedback/itunesapp.html -
HOW CAN I TRANSFER THE ITUNES PROGRAM ( NOT THE LIBRARIES,BUT THE ACTUALLY EXE PROGRAM ) FROM ONE CPU TO ANOTHER. I CAN'T
STAND THE NEW ITUNES. I WANT TO TRANSFER MY OLD ONE THAT STILL HAS THE SLIDER FEATURE. THANKSSounds like you've already installed iTunes 11 and are now trying to downgrade. To do so successfully you will also need access to a pre-upgrade copy of your library as set out below...
The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
With iTunes 11.0.3 you can enable artwork in the Songs & List views from View > Show View Options (CTRL+J) making it more like the old Album List view.
If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2 -
My ipod 32gb 1st generation battery went totally dead because the usb cable was defective. I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. Nonetheless it is charging. However can i resolve these issues bearing in mind that i am not tech savvy?
have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.
Try disabling a/v software and turn off the Firewall on your PC.
Disable antivirus software
Turn-Windows-Firewall-on-or-off
Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
http://support.apple.com/kb/TS1538
Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
Select the box next to: Open iTunes when this iPhone is connected
That way iTunes should open automatically when you connect your iPod to your computer.
And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane. -
Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
P.S. I am able to sync postcasts and music though!http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357 -
5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?
I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE! -
"itunes could not restore the iphone because the password was incorrect" I know for a fact im using the correct password. and it has previously worked. is anyone else having this issue.
Hi, I also get the message "itunes could not restore the iphone because the password was incorrect" though I am never prompted to enter a password anywhere! Nor was the backup password encrypted to begin with! Really strange, any pointers will be greatly appriciated!
-
TS1717 itunes will not open and issue 13001 comes up...? thanks
itunes will not open and issue 13001 comes up...? thanks
Perhaps something here will help:
http://support.apple.com/kb/TS1421
Regards. -
iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?
Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I downloaded itunes. It initially indicated that the download was successful, however, when I click the itunes icon, it says "ituns was not installed properly". It then gives me the message "itunes has stopped working"
Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
ALSO, if you feel like all your music will be gone as well follow through these 2:
> Downloading past purchases from App Store, iBookstore, and iTunes Store
> How to use your iPod to move your music to a new computer
IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS. -
When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.
If you're really using iTunes 7.0 you are very far behind the current version - maybe it is trying to connect to a decomissioned server. In fact I am kind of surprised it will run on a Macbook Air. Are you sure you are running iTunes 7?
Maybe you are looking for
-
Hi, I have a table in one of the OAF page in the application. For each row in the table there can be multiple attachments stored in the FND_LOBS table. I wanted to show all the attachments for a row in a column. Is it possible? Can someone please giv
-
Dear all, How can I get a report of all Taxcode rates with tax jurisdiction if their no standard report what are the table from their I can get the data. Thanks & reagards Dipayan Bose
-
In PAI module call a method and send reference to module.
Hi, In object oriented languages like Java you can send the reference to an object to a method, something like: object1.callFunction(me) where "me" is the reference to the object calling the function. So the "object1" can call methods inside "me". I
-
Quantity contracts/ Scheduling Agreements
Hello All, I am working on a special business scenario. To do this I need to invoice the "quantity contract" or "scheduling agreement". I know itu2019s not possible in standard but is there anyway where I can invoice the quantity contract or scheduli
-
While searching for instructions on how to use the new Defringe controls, I came across mention of a an eyedropper tool in this Lightoom Journal blog - New Color Fringe Correction Controls http://blogs.adobe.com/lightroomjournal/2012/04/new-color-fri