Itunes audio error message on loading iTune
I keep getting the following error message when I open iTunes "iTunes has detected a problem with your audio configuration. Audio / video playback may not operate properly"
Sure enough audio playback is not working. I have reloaded iTunes 8 using the repair function but no change. Anyone any ideas
Hello all.
Below is some information that may assist
1. Go to Control Panel
2. Now go to Add/Remove Programs or Programs and Features if it is Vista
3. Uninstall anything called Quicktime made by Apple. If you happen to see Quick Time Alternative you will need to uninstall this as well.
*Even though it may not tell you. I advise a reboot once this is finished. Now proceed to the link below to download the Quicktime Standalone
http://www.apple.com/quicktime/download/
Make sure to download the Standalone version. Not the iTunes+Quicktime
Once this is done. Then attempt to launch iTunes. If you continue to get the same message try the following
-Full basic Uninstall of Apple Software
1. Go to Control Panel
2. Now go to Add/Remove Programs or Programs and Features if it is Vista
*Uninstall in the following order if possible as this will decrease amount of reboots needed
-Apple Mobile Device Support
-Apple Software Updates
-Bonjour
-Windows iPod Updaters
-Mobile Me Pref
-Quicktime
-iTunes
*Reboot and then download and install iTunes+Quicktime
http://www.apple.com/itunes/download/
If none of those first 2 phases work. Try the last option down below. A little more in depth but this is a full cleanup of all Apple files and folders and programs.
http://support.apple.com/kb/HT1926?viewlocale=en_US
Similar Messages
-
Downloaded "Rush" yesterday on my iPad2 - sat down to watch it today. 1.23 seconds in, I get error message "cannot load video" Most annoying! Not happened before. Please ether fix or give me my money back asap
JodyWe are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
What have you tried to fix it ? Have you tried closing the Videos app via the iPad's multitasking bar and seeing if it plays properly when you re-open then app ? Have you tried a soft-reset of your iPad ? If neither of those fix it then are you in a country where films can be redownloaded (assuming that it's not a rental) ? If you are then delete it from the Videos app and redownload it via the Purchased tab in the iTunes store app.
If you can't redownload it (e.g. if it's a rental) then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Dear Friends,
i am getting error message while loading data in the cube, yesterday i got the same error message while loading ODS
the error message is as follows:
Value '差旅费 - ERIC BADEN - MEETING WITH E&Y & AYKIM ' (hex. '5DEE65C58D390020002D002000450052004900430020004200') of charac.
Thank you
Mohammad RiazHi
It seems that some updates were done on the source system side and whicle entering the value so character has been enetered which is not identifed by the Bw system.
The data has to be corrected in the source system, you will have to confirm it with your client that what the data should be and for the tiem being you can load it till PSA and correct the data in PSA, and push it manually.
Give the PSA details to your client, it will conatin the data in source system format, and they will know what value has to be changed.
Hope this helps
Regards
Shilpa -
Error message while loading XML parser into db
I get the following error message while loading xmlparserv2.jar
ORA-29534 referenced object SYSTEM.oracle/xml/parser/v2/XMLNOde could not be resolved
ORA-29545: badly formed class: java.lang.NullPointerException
using XSU111 packageI had the same problem. I did a search of the forum looking for the error number (that's how I ran across your question). It seems that the xmlparserv2.jar (v2.0.2.8 or 2.0.2.9) which is included was compiled with java 1.2 which is incompatible with Oracle 8.1.5 (which is what I have and probably what you have). You probably need xmlparser v2.0.2.7.
Do a search on the error number, the post is from Steve back on June 8. I found the correct version of the xmlparserv2.jar in my copy of the xmlschema stuff (xmlschema_v0_9_0_0.zip). I don't know which version is in the current xmlschema
(v1.0.0.0) but it is probably the new version.
Steve will email you the correct version if you ask.
Eric
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by nrajav ():
I get the following error message while loading xmlparserv2.jar
ORA-29534 referenced object SYSTEM.oracle/xml/parser/v2/XMLNOde could not be resolved
ORA-29545: badly formed class: java.lang.NullPointerException
using XSU111 package<HR></BLOCKQUOTE>
null -
"****Error from PSA****" error message when loading InfoCube
Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
MikiHi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye. -
I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
Can anyone help me sort this out? If I log in as someone else Firefox works?
== This happened ==
Every time Firefox opened
== the computer shut down unexpectedly ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)You can o a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
Some of my applications have been saying I need the latest version of Adoebe Flash Player. When I try to download it I get the following error message: 'Frame Load interrupted' and the installation stops. Any suggestions?
You can only use apps downloaded from the App store, not via a browser. There is no Flash for any iOS device including the iPod.
-
"DD8x". Error message for loading process:Operating system error !
Using the OLE command I receive the following error:
Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
Operating system error <> !
strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
lsuccess = IDIACommand.CmdExecuteSync(strCommand)
I get the same error with the "DataLoadHdFile" command.
After the error happens, I cannot load any files in the directory until I
reboot DIAdem.Hi punkmonkey,
I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
When you get the same error with
the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .
Try resetting the printing system.
OS X Mavericks: Reset the printing system -
Audio error message on playback and P Pro CS6 won't stop playback. Have to force quit.
Hello: I'm getting an audio error message on playback and P Pro CS6 won't stop playback. Have to force quit.
Earlier in the project, I would crash when moving audio up/down tracks or up/down time line.
Any thoughts?
Thanks,
Tolbert
Mac/12 core/32G ramThat screenshot will help us figure out what's going wrong, but I won't have any news until at least July 8 because our offices are shut down next week. In the meantime, two suggestions:
Download CC and see if this crash occurs in the new version.
Google cpp-99 premiere pro audio prefetch. I got several hits, but not dig into them to see if any had a solution or workaround. -
Script error message on loading
Dear Support,
I seem to get an error message on loading. The computer asks me for my password, then reveals all my bookmarks. However, before finishing loading, I see an error message concerning scripts. I have attached a screenshot. Can you suggest anything here?The computer asked you for your password? Or Firefox?
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!
Start Firefox in '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode]''' by holding down the '''<Shift''(Mac Options)''>''' key,
and then starting Firefox. -
Error Messages While Loading Acrobat 6 Pro
I get 2 error messages while loading Acrobat 6 Pro. They began to to appear after downloading, and then removing, trial versions of CS5.5 Suite and CS5.5 Flash. The error messages are:
1:- There was an error while loading the plugin SaveasXML.api. The file cannot be found.
2:- bootstrap.js script error during eval()".
Trying to uninstall Acrobat 6 Pro so it can be reinstalled fails.
How can I fix these problems?Thank you Bill,
Yeah, of course you are rigt: my AA is a dinosaur... But somehow - and to be quite honest, I don't know exactly how I managed - I CAN make PDF-files now. (?!) I changed some settings in my printing menu and, well... it worked again.
Thanx anyway for your time and energy to help me. Appreciated!
Grtz from the Netherlands,
Ingrid -
Hey everyone,
I have iTunes 10.4 and an iPod touch. I have always had trouble with synching my iPod.
Right now, iTunes will not connect to the iTunes store. When I try to synch my iPod touch, it gets stuck in "Step 2: Backing Up," and the bar loads forever. I've left it alone for several hours and it has not made any progress. When I try to restore the iPod, or update it, iTunes gives me an error message that it "Cannot connect to the iPod software update server. This has happened despite being connected to the internet, on both my school network and my home network.
I've tried messing with the hosts file in the System32/etc. folder as the website instructed on the apple website, but that did not solve the problem.
Recently, several parts of audiobooks I have have also become unplayable on my iPod, despite being able to be played on iTunes. The parts are listed but are grey and cannot be selected.
I recently copied a bunch of audiobooks via flash drive from my sister's computer to my iTunes - could this be part of the problem? They were from an Audible account that I don't share.
Thanks!
-AllisonYour iTunes stores and sync problem solution here:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Error message after loading newest version of itunes
error message states
"Some of the items in the iTunes library were not copied because you are not authorized to play them on this computer"
What does this mean? I purchased those items and now they will not load on my ipod. This only started happening after I downloaded the newest version of itunes today. I've restored my ipod 3 times today.
Please helpTry playing one of the problem tracks in iTunes. It should invite you to authorize the track. That should solve your problem.
There is general help on authorizing here:
http://docs.info.apple.com/article.html?artnum=93014
If you have problems getting tracks you purchased authorized, is it possible that you have more than one account?
If you can't solve the problem, the following authgorization FAQ has an email form for contacting Apple:
http://www.apple.com/support/itunes/store/authorization/ -
Have rented a movie from iTunes but keep getting an error message cannot load film
I have downloaded a rental movie to my iPad started to watch it and it gave me an error of cannot load film, have tried deleting the film from my videos but cannot do that either, when I go back I to iTunes to start the process again it immediately tries to play the film but the same message come up. Any ideas?
Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand.
Maybe you are looking for
-
I have a windows CS3. Does anyone want to trade a Mac CS3 for it?
-
How can I make WL 8.1 flush the cache and/or pool for 1.1 EJBs
Hi, I'm using 1.1 deployment descriptors for my CMP entity bean that were previously used in the WL 5.1 version of my project. Things do get deployed but I've observed confusing information when monitoring the EJB via Admin Console. What appears is t
-
Best Practices for Publishing your Captivate Project
Come join RealEyes tomorrow for a session on publishing Captivate projects. We will be discussing each method of publishing, and the benefits and drawbacks of publishing that way. We will also cover some of the common things missed that can make a be
-
Hi All, I am creating DurableSubscribers on a remote JMS topic. Here code snippet public void connect(){ tcf = new STCTopicConnectionFactory(RibHost, rib_port); topicConnection = tcf.createTopicConnection(); logger.debug(" topicCo
-
Hi, I am trying to add a custom field in INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC using APPEND structure. It is success while trying to do it in INCL_EEW_PD_ITEM_CSF. When i try to do it in INCL_EEW_PD_ITEM_CSF_SC, i am getting the error as "