ITunes blank screen on search, and faulty History page

Hello,
I have an iPhone 4s with iOS 6.  Whenever I try to search in iTunes the results don't load and I'm left with a blank screen. 
Also the History page seems faulty - after I clear my history there's no 'done' or 'back' buttton so I have to close and reopen the app.
Any suggestions?

Same here on iPhone 4. It works fine on my iPad 3. Rubbish again from apple. Featured stuff selected fine, it's just the search. Basically can't buy any film unless it can be found under categories or history

Similar Messages

  • My iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    my iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    Hey there Galileo,
    It sounds like your iPhone screen is solid white and you cannot do anything with it. Take a look at these steps from the following article about that kind of issue:
    Get help with the screen on your iPhone, iPad, or iPod touch
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    Priscilla,
    if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.)

  • Firefox no longer gives automatic prompts when I type in first few letters of a search - even though my browsing history is being recorded, and "Remember search and form history" is ticked in the Privacy preferences: what's gone wrong?

    Firefox has recently stopped giving (personalised) automatic prompts when I type in the first few letters of a search. What does come up is a long list of possible search subjects - but these are very general and don't reflect my own personal browsing history. My browsing history IS being recorded, however, and the "Remember search and form history" box is ticked in the Privacy preferences.
    I'm not using the "Private Browsing" option.
    There are two MacBooks in the house, sharing one wireless router. This problem has cropped up on both laptops - mine and my wife's - at around the same time.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Search and Document History in Mountain Lion

    Anyone out there figured out what Apple is doing with the Search and Document History in Mountain Lion? Here's my beef:
    Missing History in Finder. Finder used to have a "History" button in the sidebar that would track docs by when you last used them--yeterday, this week, this month, etc. This was SUPER helpful--but it seems to have disappeared. Anyone know how to make it reappear, or has Apple decided that I don't really need it?
    Really Hard to Search by Filename. In the old version, there was a button that would allow me to search by filename, but the new version makes you click through several very janky layers to do that. Anyone have a shortcut? Or advice on how to reorient my brain to the new search logic?
    Thanks!

    FileVault is one option, as etresoft points out. But you should note that e-mail is an inherently insecure medium. You should never transmit confidential information about patients via e-mail. That's like writing it on a postcard and mailing it... You're trusting everyone between you and the recipient not to read it. You need to either discuss cases only using something like a unique ID number that cannot be linked to the patient without access to your records, or you need to use encrypted e-mail (which is a pain to get set up, because everyone involved needs to participate).

  • My iPod touch 3 has a blank screen (luminescent gray) and is totally unresponsive.

    my iPod touch 3 has a blank screen (luminescent gray) and is totally unresponsive.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Modification request - Search and Form History

    Hi,
    Firefox options are currently set to include a checkbox for "Remember search and form history." I'd like to request that this be modified to two separate checkboxes: "Remember Search History" and "Remember Form History."
    Why? Because some people want one but not both. I want to be able to fill in forms quickly at sites that I frequent. But I don't want the search bar regurgitating search phrases that I'm no longer looking for. Searches and forms are different situations and should be treated as such.
    Thank you.

    Hello,
    The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
    If you want to leave feedback for Firefox developers, you can go:
    * Help (or Menu [[Image: New Fx Menu]] > [[Image: Help-29]]) > "Submit Feedback..."
    Or use [https://input.mozilla.org/feedback this link]. Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.

  • Search and Replace in Pages 5

    Search and Replace in Pages is now seriously regressive. Previously I could search for "invisibles" in a document and globally replace the search "invisible" by a replace one. Now I can't find a way of doing that. Any suggestions?

    Try this:
    Turn on Show Invisibles in the View menu.
    Select (highlight) the double para breaks.
    Use Command-E  (Find using selected text).
    Open the Find dialogue box (Command-F) and select Find & Replace.The selected para breaks will be in the Find text entry box, but will not be visible!
    Click in the Replace text entry box.
    Select (highlight) a single para break.
    Go to the Edit menu / Find and select 'Use selection for replace' (it will not show in the Replace entry box).
    In the Find & Replace dialogue box, click on the Forward or Back arrows to highlight the selected items (e.g. double para break) where you wish to start replacing in the document.
    Use the Replace All / Replace & Find / Replace buttons as per usual.
    Not a nice solution, but I hope it gets you going until Apple restores the previous functionality!

  • I am using Iphone 4s. In App Store Update, this page is not getting loaded in my iphone. Blank screen is showing up, rest all pages are getting open. Please tell me the problem and solutions.

    Hi,
    My Name is Pranav.
    I am using i phone 4-s.
    In my iphone when i go to app store > Updates, system showing me 10 updates but when i try to open this page, page is not getting open. Loader came up and then white blank screen is visible. Rest all Featured, Top Charts Genius and Search are working fine but updates page is not getting open.
    Guys please help me out to sort this problem.
    Thanks,
    Pranav
    [email protected]    
    +91-8460366331

    Looks O.K. to me Opens correctly in Firefox and Opera as a log-in page for Killer Content - Win7x64 Fx5.
    I can't see any oddities in your plug-ins. It never hurts to clear any relevant cookies and your cache.
    You could see how it goes in Safe Mode - Hold Shift key down as you double click on the Firefox icon>ignore the page that opens and continue. If the page opens you probably have a problem with extensions or themes and you should work through this -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    A lot of things have been updated as well as Firefox and you could have a culprit or conflict. Next, if there is no improvement you could try disabling third party toolbars, and you should report back at this stage or if there has been early success.
    Someone may come by with a more specific remedy.

  • TS1906 Ical frozen - blank screen, no data and unresponsive buttons

    After installing the last update, Ical is frozen - its shows no calender data, and the buttons for day/week/month don't work. I restored the calender data from my last time machine backup, after which it worked for the first time I opened ical. The next time I opened it, I was back to square one - no data, and unresponsive buttons (also not able to change the view over the top bar menu) and then I even got a blank screen (where the calender data should be).
    Luckily my data still shows on my iphone and on my google calender. Its only on my Mac (version IOS 10.6.8) that Ical (version 4.0.4 (1395.7)) isn't working. I believe this is a bug of the actual Ical software, rather than my data.
    Anyone have similar experiences, or an idea of how to fix this? Thanks.

    I had the same problem with my Radeon Mobility U1.
    The solution is to downgrade the xf86-video-ati driver to the version 6.7.195-3 and it should work flawlessly.
    Make sure pacman and/or yaourt don't upgrade this driver inadvertently to this latest, buggy version, until a fix is released.

  • Blank screen orange wifi and mute lights

    Hello,
    I have a Pavilion Dv4 laptop that does not boot. It seems to be in hibernation with the wifi and wan lights in orange.
    I can hear the fan spinning. It spins and then stops and spins again. The DVD light comes on and the numllock and caps locks blink in sequence of 1 continuously.
    Please help me! I need my laptop to use.

    Hi jendy,
    Welcome to the HP Support Forums!
    I understand that you are getting no display, but the Caps lock and Num lock LEDs are blinking. I am happy to help you with this. The below document shows the meaning of the error codes.
    Blank Screen LED Error Codes
    If the lights are flashing just once and then repeating that sequence, it indicates that the CPU is not functional. If that code is correct then I recommend calling the support line. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope that this helps.
    Regards,
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Blank screen between preloader and beginning of SWF movie

    I'm having a problem with a published SWF. A long lag time is occurring between the end of my AS3 preloader and the beginning of my SWF movie. Once the preloader disappears, the SWF screen goes blank for up to 10 seconds before the movie begins. I've monitored the SWF's download progress using Firebug, and the preloader disappears once 45% of the SWF has been downloaded, as is to be expected.  But the movie does not begin until most of the SWF has been downloaded, which causes the 10 seconds of blank screen. After reading some blog posts, I suspected that the audio embedded in the Captivate presentation was causing the SWF to download all of the audio before starting the movie. I followed recommendations to add a tiny amount of silence the beginning of each slide, but it hasn't resolved the problem.
    Does anyone know how to fix a long lag time between a preloader and movie? My SWF settings and other details are below. Thanks in advance.
    - Using Captivate 5
    - The presentation has 18 slides.  Each slide has one JPG and one audio clip.  (The audio clips were imported one at a time, instead of importing one large audio file and having Captivate spread it across multiple slides.)
    - Each slide is .4 seconds longer than its audio clip, leaving .2 seconds of silence before and after the audio clip. 
    - SWF Size and Quality are set to Low
    - Audio Quality is set to MP3, 64Kbps, 44.100 KHz
    - Using AS3 preloader set to 45%
    - The SWF is hosted on a web server and is viewed via the htm file that is generated when the SWF is published.
    Kim

    Hi Vikranth,
    Thanks for your help.  The online SWF is here:
    http://leo.lincolninst.edu/eTeach/captivate-tests/inside-focus-area/new-opt-img-mp3-chunks -full-2/inside-focus-area-new-opt-img.htm
    I've also posted the same SWF with a 15% preloader here (the smaller the preloader percentage, the longer the blank screen):
    http://leo.lincolninst.edu/eTeach/captivate-tests/inside-focus-area/new-opt-img-mp3-chunks -full-2-15/inside-focus-area-new-opt-img.htm
    I've sent the cptx file to your email address.
    Kim

  • When I click on a choice within a website, I get a blank screen titled "Search bookmarks and history". How do I fix this?

    The problem arises for such sites as the TV Guide. Normally, when I click on a listed show, a box appears telling me the details of that program. Not anymore.

    Right click on the hyperlink and select “Open Link in New Tab," that will open a new tab and keep you from getting a blank page like most people get. I don't know why they changed this option. If you don't want to do that every time you can change it in the config.
    1. In Firefox, type about:config into URL Location bar.
    2.Click on I’ll be careful, I promise! button.
    3.In the filter text box, enter the following text string with no quotations :
    ''''''browser.tabs.insertRelatedAfterCurrent''''''
    Alternatively, manually locate the preference name above.
    4.The default boolean value for the browser.tabs.insertRelatedAfterCurrent is “true”. Double click on the browser.tabs.insertRelatedAfterCurrent to change its value to''' false'''.
    5.Close the tab, and the change will take effect immediately.
    Hope that helps some people..

  • Unbeleivable this is not fixed - Blank screens when searching in ITunes.

    October 8, 2012 was my first (perhaps last) Apple purchase.  Being an Android user and fan, I am surprised that I cannot find a fix to the simple question "When I do a search in Itunes, why does the screen go blank and there are no results"?  The App store is the same way.  I have tired everything from reboot, closing apps and reboot, log out of Apple, changed time, and a few others.  If Apple doesn't care enough to fix things, I will return this pile of junk and get a tablet with Google.  I have a brand new Ipad new generation or whatever they call it with IO6.  It's the "latest and greatest".  No cell plan, WiFI only.  Hopefully, someone knows what the problem is.  If not, Best Buy is getting this back.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • HT1937 My iPod is working fine , syncing with itunes  but screen still dark and not responding !! Please help thanks

    hello everybody , I have an iPod touch 4g . Now a few  days ago it got wet in water . i didnt notice that but when i came to know , i saw it very hot . i kept it away in open , after some time it cooled down but it was dead . it wasnt turning on . then i searched it on net for fixes... finally i tried the rice method , i kept it in rice filled in a sealed box for 1 full day . now i kept it in charging ...its syncing with itunes and making that sound but the screen is stilll dark and wont respond . What should i do ? please help! thanks

    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Maybe you are looking for